Why would indesign automatically move links to the pasteboard
Hello There,
Has anyone had an issue when working in indesign with alot of eps images, text and vector graphics, where the while working the various links on various pages show that they are on the page.
But when going to the link in the links panel the link says its on the "PB" pasteboard?
Your urgent response would be greatly appreciated.
Thanks
Hi Bob,
ID CS 5.5 design standard, latest updates running on Mac OSX Lion 10.7.4.
The screen grab below
As you can see the links show everything on pg4 are on the doc but from there to pg 12 is saying the links are on the pasteboard.
Similar Messages
-
Why would a rented movie work on the ground but not in the air?
This is the craziest thing. I rented a movie from my MacBook Pro and then transferred it to my iPad 2 for a flight. However once I got on the plane each time I tried to open it I received a message that the movie could not be opened. OK. I figured I made a mistake in the transfer. Once I got home I tried to open the movie again (in Airplane mode, just to be sure) and it loaded right up. I didn't press play since I was leaving on another flight in two days. Got on the flight and had the exact same problem. Once I landed I tried it again and it loaded right up, but I didn't hit play because I have another flight on Friday. What are the odds it will occur three times in a row? I have 20 days left on the rental and about six more flights. This could be fun.
To lend a little irony to the situation the movie is "Up In The Air". Anyone have any clue what the heck is going on? The only variable among the two instances is that in the air I had headphones plugged in, but on the ground I didn't.Hi Dominique:
First-if your mac can control the camera but not see the video,
*Open Garageband
*Play a note or two
*Close Garageband
*Open iMovie
The camera will work now-REALLY!!
If not, look here:
http://docs.info.apple.com/article.html?artnum=43000
Sue -
I just bought a new IMac. I have photoshop elements installed on my old IMac and would like to move it to the new one. How can i do this?
Unfortunately, adobe doesn't have photoshop elements 6 available for download, as far as i know, so your best bet is to either get an usb dvd drive or use an computer with a dvd drive and copy the contents of the pse 6 dvd to somethiing like
a flash drive and then copy the contents from that drive to your new computer.
Do you still have your older mac and it has a dvd drive?
You can share files between the two using airdrop or an ethernet cable.
http://support.apple.com/en-is/HT203106
http://support.apple.com/kb/PH18722
http://support.apple.com/kb/PH14409 -
why would an error pop up saying the installer is damaged. The Installer can’t open the package. There may be a problem with file ownership or permissions. when trying to install java 7?
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Select
/var/log ▹ install.log
from the hierarchical list on the left. If you don't see that list, select
View ▹ Show Log List
from the menu bar. Then select the messages from the last installation or update attempt, starting from the time when you initiated it. If you're not sure when that was, click the Clear Display button in the toolbar of the Console window and then try the installation again.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message (command-V).
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting. -
I made a reverse radial gradient to look like "sunlight" and I would like to move it to the top of my image to appear like the light is coming from above, but it won't allow me to move the radial gradient anywhere. I have CS6. Help please
Assuming you did this with a Fill Layer, double-click the thumbnail in the Layers panel to bring up the Gradient Fill dialog, see to it that the [ ] Align with layer checkbox is set, and (while the Gradient Fill dialog is still up) try dragging the gradient to where you want it on the main display. Then [ OK ] out of the Gradient Fill dialog.
-Noel -
Why my itunes can't link to the itunes store? my internet is functional.
why my itunes can't link to the itunes store? my internet is functional.
Close your iTunes,
Go to command Prompt -
(Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
(Win XP SP2 & above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
In the "Command Prompt" screen, type in
netsh winsock reset
Hit "ENTER" key
Restart your computer.
If you do get a prompt after restart windows to remap LSP, just click NO.
Now launch your iTunes and see if it is working now.
If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
http://support.apple.com/kb/TS4123?viewlocale=en_US -
Since last week indesign deletes 2 links AND the data (flv video and mp3), frustrated
hallo everyone
since last week indesign deletes 2 links and the data ... when it deletes i cant find it anywhere ...its just gone! cant understand it ...
i tryed to relink i tryed to delete the link and linked the same video with the same name and with another name ... i tryed to get it
work on mac and windows ... always same issue
where is the problem?!
first it worked ...i published the site via html ...then i got to change things and suddenly crash ...
before this happened indesign took the link, showed it on the swf file but NOT in the html or ftp server ?!
hope to get some helpHmm... Ok, so I took that project and tried importing it to a new project, still with no luck. Then I tried taking that project and creating a new timeline by dragging one of the stills to the new item icon so that I'd get whatever PrPro decided was the best timeline, and still no luck. Then I tried creating a new project and importing different footage and it worked. Tells me perhaps there's something wrong with the stills? I know not to use overly-large stills in a project, but they're all around 4k resolution or smaller... so surely that's not too big, right? 412 stills total 1.5GB which means an average of about 2.5 MB per file... certainly not too big. I even had a couple video clips in the timeline that were shot with a point-and-shoot still camera, and I tried taking those out just in case it was something in those, and still no success.
So, ultimately this project got exported without CUDA, and I'm okay... but I also am wondering what caused the problem? I do a fair amount with stills (not a lot, but enough) and I need it to work... do I just go on with life, assuming that it was some weird fluke? Or do I try a complete wipe and reinstall of OS and Programs?
Oh, one other tidbit... whenever PrPro crashed and closed, the application itself wouldn't close. I have to go into the program manager and force quit it...
Thoughts? Recommendations? -
"Why would Photomerge Automatically Reduce Merged Images in CS5"
Hello,
Man am I hoping that someone out there can help me with something thats I've been racking my brains over trying to figure out for a week now...
I resently went to New York... I took several, multiple images, from different locations surrounding the city with plans on taking each set and making multiple panoramas from each of the locations that I shot from.
For the most part "Everything" has been working out just fine. Except for a few images that I didn't apparently have enough "Overlap" for the "Reposition" to do its thing in Photomerge. I read within these forum pages that it requires about 40% of an overlap in order for Photomerge to see what its looking at. I also read that the "PhotomergeUI" plugin was available so that I could get the "Interactive Layout" back into CS5. I used it in the few instances that I needed to, with no apparent problems that was until I attempted to merge panels that I had merged out of 3 or 4 individual images. I had to use the Interactive Layout in order to merge the 2 panels that I had configured and as it was going through it merging process I watched the lower left status bar go from, for example,.. 18.2 inches - 18.6 inches for each of the 2 panels I was attempting to merge. When the process was completed, the height had gone from the 18.+ inch height, down to 9.2 inch height. Basically cutting my image size by half !
I tried the whole process over again with a different set of images that I had taken... The set consisted of 12 images with a Height of 4288 pixels (portrait). I managed to get 9 of the 12 images merged, keeping the image in the 4000 - 4200 pixels in height... (i don't have a pano head so my camera was leveled by eye) I then merged the remaining 3 together with no problem... When I went to merge the 3-panel merge with the 9-panel merge the Merge Process did the same thing... I watched the status bar go from 4000 - 4200 for the heights of the 2 panels, down to 2167 pixels once merged!
I then tried the whole process over again, doing 2 panels of 6 images... when I got to the last set of 6, my height, again, dropped by half once merged... So I tried something to see what would happen. I took the remaining panel of 6 that I merged with no alteration to their height... and reduced them to match the height of the set that had been automatically reduced because of the merge.... I then attempted to merge the 2 panels together, and again, the final merge had the height reduced... this time down to a whopping 2.4 Inches! From 18 inches in height, down to 2 inches in height, and not once did I ever go near anything that had to do with scale or image height...
Can someone Please tell me what going on...? I once did a panoramic in CS4 consisting of " 2 - Rows of 32 Portrait Images ", one row on top of the other... The final panoramic was of a 15 mile stretch of New York that I took 3 years ago... 64 images in total and I never had anything like this happening when it did it... It took me a while, but I never had any issues with Height and therefore overall size being altered as a result of a Photomerge...?...?
I look forward to hearing some insight...
ToxicImagery....Hi Bob,
ID CS 5.5 design standard, latest updates running on Mac OSX Lion 10.7.4.
The screen grab below
As you can see the links show everything on pg4 are on the doc but from there to pg 12 is saying the links are on the pasteboard. -
I have put my Michel Thomas french lesson cd's onto my ipod but when each track finishes it does not automatically move onti the next track. I have ticked the option "part of a gapless album".
naturescape_peopletecture wrote:
and made a "brush-arrowhead" as you can see in the image below.
To answer your questions need to know who you made a brush arrowhead.
The default arrowhead are specifically designed with a bounding box designed to not have this problem, and even have this option
You are wanting arrows in the middle of a line so would recommend a scatter brush.
And a stacked appearance with 2 strokes.
Though you may not like who the dashes are lining up here so if you go back to the first method I show, you can do a few paths too get this. -
Why won't my movie play from the title screen?
I purchased "Bridesmaids" and a couple of other movies on my iTunes account. When I go to play the movie, it loads the title screen, but I cannot start the movie when I try to push "play" or through the scene selection. Is there any way to re-download a movie that I have previously purchased? Thank you!
Hey MerHTX16,
Thanks for the question. If I understand correctly, you want to download a past purchase. I would recommend that you read this article, it may be able to help the issue.
Download past purchases from iTunes in the Cloud - Apple Support
On a Mac or PC
Open iTunes.
Click More (three dots) in the upper-left corner.
Click Movies or TV Shows from the pop-up menu.
Click iTunes Store.
If prompted, sign in with your Apple ID and password.
Under Movie Quick Links or TV Show Quick Links on the right side of the iTunes Store, click Purchased.
Select Not in My Library to view purchased content that isn't on your computer.
Scroll to find the item that you want to download.
Click the Download icon in the upper-right corner of the item you want to download. Your app downloads to your library.
If an item is already in your library, the Download icon won't appear.
Thanks for using Apple Support Communities.
Have a good one,
Mario -
Why does InDesign CS5 modify linked PSDs with each Save?
I'm using Creative Suite CS5, Mac OS 10.6.6. Wondering if anyone else has experienced this, and how is it fixed?
Every time I save an InDesign document with a linked PSD file, the PSD file's modification date changes as well, which in turn shows up in InDesign as a link that needs updating. After I update the link in InDesign and Save, that psd file's modification date changes again, and it shows up again as a link that needs updating. There seems to be no limit to the cycle, and it isn't specific to any particular file...happens in every similar scenario.
This is makin' me dizzy!This is caused by a bug in a Suitcase update. Extensis issued another patch almost immediately.
-
Final Cut Pro X 10.0.8. How to automatically move clips to the left?
I've upgraded to Final Cut Pro X 10.0.8, and there are differences from the earlier ones. How do I set my timeline to automatically move the clips along to the left when I delete a clip in the middle of my timeline?
I can't find an answer to this question anywhere?The backward delete key should do that, The foorward delete key will insert a gap clip.
Russ -
I have an audiobook stored on the music section of my ipod classic 2006 and would like to move it to my audiobook section. Is this possible? How would I do that?
Yes. Highlight each of the audiobook tracks that are appearing in the Music section of your iTunes library. Right ->click on them and choose Get Info. When the window pops up, click the Options tab. Here you will find an option for Media Type with a drop down list. Choose Audiobook from the drop down list.
B-rock -
Why can't I move items in the finder window
I'm the administrator, but can"t move objects in the finder window,Why ?
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Triple-click the line below to select it, then drag or copy the text — do not type it — into the Terminal window and press return:
ls -@Odeln Desktop; ls -@Oeln "$_"
Post any lines of output that appear below what you entered — the text, please, not a screenshot.
If any personal information appears in the output, edit before posting, but don’t remove the context. -
Why can't i move pages in the pages palette?
what i'm trying to do is move one page below another page on the pages palette. i lined up two pages horozontally, to make sure everything lines up the same. now i want to move one page below the first page, so that i can build in bleeds. the second page keeps snapping back to the first, as if it is a spread. These pages are NOT set up as spreads. I have "allow pages to shuffle" in the options flyout menu. What is going on? thanks for any help about this strange behavior.
Although I prefer not to show my pages palette lined vertically, I cannot reproduce this issue precisely.
When you move pages on the page palette, are you paying attention to or seeing the black bar that appears when you begin to drag pages? This appears in CS and CS2. I don't have CS3 to confirm, but I think it is there, too.
The black bar gives a visual cue as to where the page being moved will snap to. If the bar is adjacent to another page, it will move into a spread with the existing page on the side indicated by the black bar (with allow pages to shuffle turned off). If the bar is between pages (when palette preference is not vertical) or to the right of the page (when vertical), then the moved page will appear in that location in the page order.
So, try this:
Click on your page 2 in the page palette.
Drag slightly to the right until a tall black bar appears next to page 2.
Release the mouse.
This will break page 2 from the spread with page 1 and place it, as a single page spread, between page 1 and 3.
-mt
Maybe you are looking for
-
I received a notification on my Iphone recently that "Leroys Ipad" is now using my phone number for Imessage. The problem is that i no longer have that Ipad but my ex girlfriend does and we no longer communicate. How do i receive Imessage on MY PHONE
-
What SAP Table contains the info that a screen fields is hidden
What SAP table contain screen painter information. Specifically what table contain the logic that a Infotype screen field is vivisable / hidden from the online user. I have been looking in SM51 and cannot track down the table used for this purpose...
-
Setting Crystal report description.
When adding a Crystal report to CMC, there is an check box "Use description from report " to display the report description. Once I select this and add a report to CMC, is there away to remove this and add my own description?
-
Quick Search in Catalogue not working
Hi All, When we are trying to find the material in catalogue by entering material number or description the material is not coming up. What ever we are typing in the search box and trying to search the material it is not working. But when we are sear
-
hi, We are upgrading from BI 3.1 to BI 7. As part of the upgrade, we are also planning to use the Bex Web functionality. We have maintained the necessary settings in SICF and SM59 for BexWeb. But when I try to open the query through BexWeb by using