Why would my video clips be running too fast when played on the monitor panel?

I posted my problem earlier today, but re-reading it maybe I didn't explain myself well enough.
My main question is: "why would my video clips be running too fast when played on the monitor panel ?". This is occuring after I have selected my media from the Tasks Panel and placed them in correct order in the Timeline/Sceneline. I knew something was wrong when I could see that the clips were not indicating their right length when viewed in the (expanded) timeline. They were compressed into just a few seconds, whereas the clips should have been at least 5 minutes. I ran the clips in the monitor and sure enough they ran too fast, with a lot of jerking movements.
The 3 video clips I am trying to make into a HD PAL video were taken with my Nokia N8 mobile video camera. These are in mp4 format. Can this present a problem ? Note that when I play these individual HD clips on my computer in (Windows Media Player) they run fine.
After I placed the clips in my Project Panel (or before in the Organize Workspace), I have perforned no change or manipulation of the clips. They are in their original state.
Just too confirm that the clips did seem to be compressed, I burnt a DVD, the resultant video ran in a matter of seconds.
Help would be greatly appreciated.

Yes, that is what the problem was.
Although the video camera on my Nokia N8, mobile was capturing at 25fps,
for some reason once transfered over to PrE9 (via file transfer), the clip was interpreted as 500fps. Once in Interpret Footage I was able to change the fps to 25.
Thanks for the help.

Similar Messages

IPhoto 8 Slideshow runs too fast when I export

I painstakingly created a slideshow for a friend to use during her wedding rehearsal next weekend. It was created so specific photos come up during lyrical points in each song. Worked phone in iPhoto but when I exported to Quicktime so she could have the CD to use it runs differently and now the pictures are not in sync with the lyrics. Can anyone help me?

This is a know issue with iPhoto, precision audio syncing. You're best bet would be to useiMovie HD 6 to build the slideshow. With it you can have multiple audio tracks where you can add the audio, crop, fade in and out and match precisely to the photos. From there you can export to iDVD or Quicktime.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto (iPhoto.Library for iPhoto 5 and earlier) database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger or later), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 6 and 7 libraries and Tiger and Leopard. Just put the application in the Dock and click on it whenever you want to backup the dB file. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.
Note: There's now an Automator backup application for iPhoto 5 that will work with Tiger or Leopard.

HT1583 When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls

Hi, please help me When I render my project in IDVD, video and audio runs properly, but when I burn it in professional quality and burning is finished there was no audio on the last two chapters, one audio is attached to the clip and the other one is from itunes, pls help

Hi
My first two thoughts
• Shared to Media Browser - BUT as Large or HD - try Medium !
• audio from iTunes - use to go silent
- in iTunes
- Create a new PlayList with needed audio
- BURN this as a standard Audio-CD (.aiff) - NOT .mp3
- use the files on this CD in Your Movie project - I ALWAYS DO - and only use .aiff ever - never .mp3'
My notes on this:
No audio on DVD disc.
Most common origin.
1. Imported audio from iTunes.
• In iTunes copy out as an Audio-CD .aiff (Same as played on standard Stereo CD - no .mp3)
• Use this in Your movie project
2. Low - Free Space on Start-up/Boot/Internal/Mac OS Hard disk makes it hard for iMovie to work as intended.
Down to 1.3 GB and it doesn’t work - especially audio don’t migrate over to Media Browser
(iM’08 & 09)
3. Material in iMovie’08 & 09 - Shared to Media Browser and here selected as Large
large.m4v. It silenced out this project in iDVD. By making a slight alteration - provoking it to ask for a new Share/Publish to Media Browser and here selecting 640x480 - and audio was back when a new iDVD project was created including this movie.
Minuscular - - 176x144
Mobile - - - - - 480x360
Medium - - - - 640x480
Large - - - - - - 720x540 960x540
HD - - - - - - - - 1280x720
4. Strange audio formats like .mp3, .avi etc.
• Change them to .aiff. Use an audio editor like Audacity (free)
5. Main audio is set to off in System Preferences - Does this by it self - Don’t know why
Cheque Audio-Out resp. Audio-In
6. Ed Hanna
Had the same problem; some Googling around gave me a kludgy, but effective fix
Downgrade Perian from recent versions back to version 1.0.
That worked for me, and so far I haven't encountered any deficiencies — except it takes more advanced versions of Perian to enable QuickTime to handle subtitles in .srt format — that I have noticed.
7. GarageBand fix.
In this set audio to 44.1 kHz (Klaus1 suggestion)
(if this don’t work try 48 kHz - me guessing)
Before burning the DVD.
• Do a DiskImage (File menu and down)
• Double click on the .img file
• Test it with Apple DVD-player
If it’s OK then make Your DVD.
Burn at x1 speed.... (or x4)
• In iDVD 08 - or - 09
• Burn from DiskImage with Apple’s Disk Utilities application
• OR burn with Roxio Toast™ if You got it
Yours Bengt W

Recorded video is not natural and runs too fast.

Hi,
I am facing one of the very strange problem with my cameras and I am not sure whether some unintentional setting is causing that.
When I record the video and try to play it the video does not look natural and runs too fast like 5 min video finishes in 3:20 minutes.
Any ideas what may cause this as until now it was working fine?
Thanks and regards,
Sanjay.

Hi, My name is Eric Moyers. I am a Network Support Engineer in the Cisco Small Business Support Center. Thank you for using the Cisco Community Post Forums.
What wre you using to playback the recorded video? If it is the video monitoring software from Cisco, what is the version number?
Thanks
Eric Moyers
Cisco Network Support Engineer
SBSC Wireless and Surveillance SME
CCNA, CCNA-Wireless
1-866-606-1866

Why are my podcasts running too fast

my podcasts and audio books run too fast so the speech is too quick to listen to, my music seems ok - anyone experienced this problem or got suggestions for me?

Slightly below the scrubber bar the is a box with either 1/2X. 1X or 2X. Those are the playback speeds. Tap on the box to change/cycle through the speeds.

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and th

When I have video clips on my timeline, they do not play in the monitor screen. I hear the sound track but can not see the image. To test if my new files are somehow the problem, I went back and used video files that I used successfully a year ago, and they no longer play in the monitor window. I hear the sound track, but do not see any video. Have I changed some setting that controls video playback in the monitor window?

Randy Ruttger
Thanks for the follow up.
Missing in this equation were the version of Premiere Elements that you were using and the computer operating system on which it was running. But...
The deed is done. But.....Until now and after you went ahead and moved to version 12, we now learn what version of Premiere Elements you were using. We still do not know the computer operating system involved.
You just said Premiere Elements 10. Premiere Elements 10 is hit by a serious known display issue if the computer uses a NVIDIA GeForce video card/graphics card. In this issue, the only remedy is to roll back the driver version to about May 2013. The description of the problem and how to do the roll back are described in one of the Announcements at the top of this forum. What video card/graphics card does your computer use?
On another front, Adobe will be releasing a new version of Premiere Elements any day now. No one but Adobe knows the feature set for the new version. That type of information is announced at the moment of release of the new version.
So the remedy to the problem that you presented in this thread could have been...
1. Rolling back the NVIDIA GeForce driver version to about May 2013 if possible (Windows 8 or 8.1 64 bit, may not be possible)
2. Move to another version of Premiere Elements (which you did)
I offer the above for consideration so that you can review your decisions. We are pleased to learn that Premiere Elements 12/12.1 works for you.
Please do not hesitate to ask questions and ask for clarifications, but remember that the answers are in the details.
Best wishes,
ATR

Why would Safari try to insert an s, as in https, into the facebook log in. Safari won't open the secure page. Advice?

Why would Safari try to insert an s, as in https, into the facebook log-in page. "Safari can't connect to this secure page." I've checked preferences and cannot find a reason for this change to the regular facebook address. Safari 5.0.5 on MacbookAir. I can't even download the updated software.

If you leave your session idle for a while, the site might log you out due to inactivity, but... I wouldn't trust that, either.
Usually your bank will have a link, menu, or some other way to log out. Certainly that is the best thing if you can do it. Sometimes if a site is not fully compatible with Firefox its style rules will result in a jumbled layout. You can disable all the style rules and view the site in a plainer layout to see whether you can spot the missing link. To do that:
tap the Alt key > View menu > Page Style > No Style
(The tab will remain unstyled going forward. You can use the same menu to reapply the page's style sheets later.)
Also, if you want to break the connection between Firefox and your banking session, you can clear your cookies for the bank site. This won't necessarily have any effect on your banking session ''on the server'' but should make it impossible for someone to use your Firefox to do anything in that session. To clear cookies for the current site, you can use the Page Info dialog. Here are 3 ways to open it:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
* click the padlock on the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then reload the page and the site should behave as though you are not logged in.

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Importing a lot of video clips from a Sony camera to FCE; during the Log and Transfer process, is there a way to add multiple clips to the browser instead of one at a time?

Select one and click cmd-A which selects them all.
Then click the import button if it hasn't started already.

Time is running too fast

Hi there
I've got an iphone 2g, FW 3.1.3 and a very strange issue:
The clock is running too fast. After one day the time on my phone is 1 hour ahead ( 1hour/each day). When i connect and sync, the time on my phone jumps back to the normal time, the time on my macbook.
I did a total reset (came from version 3.0), but with no luck.
Ive got no option "Set time automatically" in my Firmware version.
I hope somebody has any idea what's going wrong.
Thank you for reading anyway.
regards
Pedro
Message was edited by: Pedro1982
Message was edited by: Pedro1982

Thanx, that helped!!!
Turned out that one of my homes' NLS_LANG had norwegian_norway and the others had american_america. As soon as I changed the norwegian to american, Forms started and I let go a huge sigh of relief :-))
Thanx again!

Why do YouTube videos stop? I have restarted,reset, played thru email and played thru app. It plays on my desktop fine.

Why do YouTube videos stop? I have restarted,reset, played thru email and played thru app. It plays on my desktop fine.

Okay... No flash... understand...
So I went ahead and installed YouTube app on my IPhone... but now when I select the youtube video from Facebook I get into youtube and I can see the video I 'm trying to play, but now a message appears over the video "The content owner has not made this video available on mobile. Add to playlist to watch it later on a PC." At that point I was able to seach & select other videos by the artist (George Strait) off youtube and play them pkay on my Iphone, but not this particular one posted on facebook. Oh well.. I've spent enough time on this one, I know when I can't get there from here..
Thanks razmee209 for your help, its much appreciated..
Marvin

Why won't my MacBook run on battery and display on the monitor? Runs fine if power cord is plugged in. I have to be plugged in to see the monitor display. Any ideas

Why won't my laptop run on battery and display on the monitor? If it is plugged in to power it works fine but the monitor goes blank if the power cord is removed. Any ideas?

Nothing is wrong. what your're seeing is by design.

HT5170 Why would I be getting this update if I am not, to the best of my knowledge, anyone's ARD client???

Why would I be getting this update if I am not, to the best of my knowledge, anyone's ARD client? I have not installed ARD in this computer, but am constantly getting permissions repair messages regarding remote management from Disk Utility. Very weird...

Yes, it's annoying but the messages are innocuous and you may ignore them. They will be repeated every time you repair permissions. The ARD client was installed by Software Update at some point in the past.
You don't need to repair permissions unless you've received a permissions error message from OS X.

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which als

I have tried to view videos created in premiere elements 10 and I get the following message: "this file type is not supported, or the required codec is not installed. When it opens there is a red screen in the monitor panel with Korean writing which also appears in the place of each clip in the video. I tried uninstalling and reinstalling premiere elements 10, but that did not have any effect on the video. Do you have any suggestions? I researched codec, but do not understand them at all.

gloucester
In case you did not find it, the following is a copy/paste of the Announcement on Premiere Elements 19/NVIDIA GeForce
that appears at the top of this forum.
Premiere Elements 10 NVIDIA Video Card Driver Roll Back
If you are a Premiere Elements 10 user whose Windows computer uses a NVIDIA GeForce video card and you are experiencing
Premiere Elements 10 display and/or unexplained program behavior, then your first line of troubleshooting needs to be rolling
back the video card driver version instead of assuring that it is up to date.
Since October 2013 to the present, there have been a growing number of reports about display and unexplained workflow
glitches specific to the Premiere Elements 10 user whose Windows computer has a NVIDIA GeForce video card. If this applies
to you, then the “user to user” remedy is to roll back the NVIDIA GeForce video card driver as far as is necessary to get rid of
the problems. The typical driver roll back has gone back as far as March – July 2013 in order to get a working Premiere
Elements 10. Neither NVIDIA nor Adobe has taken any corrective action in this regard to date, and none is expected moving forward.
Since October 2013, the following thread has tried to keep up with the Premiere Elements 10 NVIDIA reports
http://forums.adobe.com/thread/1317675
Older NVIDIA GeForce drivers can be found
http://www.nvidia.com/Download/Find.aspx?lang=en-us
A February 2014 overview of the situation as well as how to use the older NVIDIA GeForce drivers for the driver roll back can be found
http://atr935.blogspot.com/2014/02/pe10-nvidia-video-card-roll-back.html
ATR

Why does my 7.0 iDVD theme not have sound playing in the menu?

Why does my 7.0 iDVD theme not have sound playing in the menu? When I click to get menu info, the "TravelAudio" audio is listed, but it won't play. The volume is not the issue, it just isn't there.

Hi
First of all - I would try to trash the iDVD pref file (or rather start a new User-account and log into this and re-try).
Yours Bengt W

I am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

i am having trouble with downloading videos from my Sony HDR-XR160 video camera. iMovie doesnt open up when i connect the camcorder. any suggesions?

Looking up your camera online, I found it is capable of 1920 x 1080 Full HD 60p Recording. It's the 60p (60 frames per second Progressive) that's the problem I think. iMovie '11 will do 60i (Interlaced). You might need to convert it from the format the camera currently uses into another format to get it into iMovie. Read more about it on this link here: How to import 60p footage From that message thread comes the recommendation to use ClipWrap to convert the camera's video clips now that they are in 60p:
Tom Wolsky
Re: How to import 60p footage
Aug 17, 2011 12:40 PM (in response to ptburnett68)
Use ClipWrap to rewrap to QuickTime. Import the files. Edit in either 59.94 or 29.97. The latter if you want to use the high frame rate for slomo

Why would my video clips be running too fast when played on the monitor panel?

Similar Messages

Maybe you are looking for