Why would Safari 6.0.5 display Flash video using HTTPS but not using HTTP?

Hello Apple Community,
Here's some technical Background:
Platform:
MAC OSX Lion 10.7.5 (11G63)
Windows 7
Windows XP Pro
Safari 6.0.5 (7536.30.1) - MAC
Safari 5.1.7 (7534.57.2) - Windows 7
Safari 5.1.2 (7534.52.7) - WIndows XP Pro
Flash Player 11.7.700.225 - MAC
Flash Player 11.6.602.171 - Windows 7
Extensions:
MeasureIt 0.4.5 - Enabled
Firebug Lite for SAfari 1.2.0.16797 - Enalbed
Block YourSelf from Analytics 1.0 - Disabled
Lorem Ipsum 1.2 - Enabled
Security:
Fraudulent sites - Check
Web Content - Check
Internet plug-ins - Check
Additional Steps:
I just updated Flash again to the latest version MAC
I reset Safari back to defaults
This issue may be just my setup but I cannot figure out nor think of the appropriate question to ask to start to troubleshoot besides the one provided in this thread.
This is the web page I am having issues with Safari:
http://doc-fu.com/episodes
NOTE: This site is built using Drupal 6
I've tested this page on all other browsers MAC + PC and the videos load fine and play accordingly, even the preview poster displays
Testing the same page with Safari MAC + PC and I get a blank Flash screen but the YouTube logo still appears, see following image:
Here comes the confusing part, Under HTTP I get the above blank Flash screen YET when I switch to HTTPS like so https://doc-fu.com/episodes, the videos display and play as expected. Additionally, when under HTTPS all the other browsers DO NOT display the flash video.
I am able to play videos on YouTube's website.
Any help or guidance is much appreciated.
Thank you very much for your help,
bpdadvertising

Same problems here on that site with Safari 6.0.5
The have a Facebook page you can post and ask for help > https://www.facebook.com/DocFuAndHealthTeam

Similar Messages

Why would Safari try to insert an s, as in https, into the facebook log in. Safari won't open the secure page. Advice?

Why would Safari try to insert an s, as in https, into the facebook log-in page. "Safari can't connect to this secure page." I've checked preferences and cannot find a reason for this change to the regular facebook address. Safari 5.0.5 on MacbookAir. I can't even download the updated software.

If you leave your session idle for a while, the site might log you out due to inactivity, but... I wouldn't trust that, either.
Usually your bank will have a link, menu, or some other way to log out. Certainly that is the best thing if you can do it. Sometimes if a site is not fully compatible with Firefox its style rules will result in a jumbled layout. You can disable all the style rules and view the site in a plainer layout to see whether you can spot the missing link. To do that:
tap the Alt key > View menu > Page Style > No Style
(The tab will remain unstyled going forward. You can use the same menu to reapply the page's style sheets later.)
Also, if you want to break the connection between Firefox and your banking session, you can clear your cookies for the bank site. This won't necessarily have any effect on your banking session ''on the server'' but should make it impossible for someone to use your Firefox to do anything in that session. To clear cookies for the current site, you can use the Page Info dialog. Here are 3 ways to open it:
* right-click and choose View Page Info > Security > "View Cookies"
* Alt+t (open the classic Tools menu) > Page Info > Security > "View Cookies"
* click the padlock on the address bar > More Information > "View Cookies"
In the dialog that opens, you can remove the site's cookies individually.
Then reload the page and the site should behave as though you are not logged in.

Flash video works locally but not on server

I am hoping that someone can help me solve this problem. I cannot seem to fix it. I have created a flash video and it works fine locally but doesn't when I upload it to the server. All I get is a white blank screen. I can access the Flash settings but the video doesn't display. I have checked all file paths, which are correct since everything is in the same folder. I have looked up other forums trying to find a solution but nothing has worked yet. Does anyone here have any idea on how to solve this problem?
My operating system is Windows XP. I am using IE8 browser and my flash player is up to date. Any help would be appreciated. Thanks.

Nevermind. I ended up solving the problem on my own. This old guide that I used before ended up helping me out. I will post the link here in case anyone else has the same problem.
http://web.archive.org/web/20080723224615/http://www.adobe.com/devnet/flash/articles/flvpl ayback_behaviors_print.html

Flash videos showing locally, but not on my site. help please

Hi,
I converted several avi's to flash, I then inserted the FLV
file into and html file in dreamweaver.
The flash files will play locally, but not when i upload them
to web server. Check it out here please
http://kdsi.org/kds/demo.html
please check the demos above to see what i mean. I just get a
blank page.
Anyway to insert video into the page like youtube? (instead
of the "demo video" button have the video embedded and just click
play to play it. without using the popup like i did.)
thank you.
thanks

Hi,
I am sorry i did not get what you mean with the last
sentence, but generally, this may be a path problem, you need to
check your FLV path and make it meet the path on the server not the
local machine.

Flash Video plays locally, but not on web

I have a htm page that I have inserted a Flash Video. It
plays locally, but not when I have it on the web. I get nothing -
no skins, nothing. If I rt click, there are the settings for flash.
I have the scripts in my scripts folder - double checked that. Can
anyone see what I'm doing wrong?
Here is the link.
http://www.metuchen-edisonymca.org/video/test.htm

right off the top ..
You have two script calls to the Scripts folder and file ..
one is root
relative and the other goes up one level. One of them needs
to be removed.
Nancy Gill
Adobe Community Expert
Author: Dreamweaver 8 e-book for the DMX Zone
Co-Author: Dreamweaver MX: Instant Troubleshooter (August,
2003)
Technical Editor: Dreamweaver CS3: The Missing Manual,
DMX 2004: The Complete Reference, DMX 2004: A Beginner's
Guide
Mastering Macromedia Contribute
Technical Reviewer: Dynamic Dreamweaver MX/DMX: Advanced PHP
Web Development
"motomoto111" <[email protected]> wrote in
message
news:fm8808$7lo$[email protected]..
>I have a htm page that I have inserted a Flash Video. It
plays locally,
>but
> not when I have it on the web. I get nothing - no skins,
nothing. If I
> rt
> click, there are the settings for flash. I have the
scripts in my scripts
> folder - double checked that. Can anyone see what I'm
doing wrong?
>
> Here is the link.
>
>
http://www.metuchen-edisonymca.org/video/test.htm
>

Why would Safari 6 not cache certain cacheable resources?

In our web application, which uses GWT, we have many Javascript resources. In the case of the GWT module's Javascript, the resource is 790kB (226kB gzipped). All the other Javascript and stylesheet resources are cached, but Safari 6 doesn't cache this one for some reason. Some points that may be important:
- Our server sends this javascript gzipped, and the response does include the header
Cache-Control: public,max-age=31536000
and I can see this response header, along with a confirmation that this resource is not cached, using the Safari developer extensions.
- The URL has a .html extension, as is the pattern with GWT applications (it has to do with bootstrapping the module). I don't know if this is relevant, but it is the only difference I could identify between this resource versus others that are cached.
- This is happening with Safari 6 on Mac OS 10.8.*. Chrome and Firefox on Mac, as well as the IE versions on Windows that we've tested do cache this javascript resource.
- In my particular Safari environment, there are no extensions installed or enabled, and caching is definitely not disabled (and as I mentioned, all the other static resources that have the same Cache-Control header are cached as expected).
Has anyone else experienced an issue like this with a GWT web application or otherwise? Is the .html extension the the cause of issue? If so, why would Safari care about the content type of the resource when it comes to whether or not to cache it, as long as the appropriate HTTP response headers are set? And why would it behave differently from other browsers?
I spent some time searching for a similar question or discussion but I could not find anything here or anywhere else.

Same problems here on that site with Safari 6.0.5
The have a Facebook page you can post and ask for help > https://www.facebook.com/DocFuAndHealthTeam

Why is it that Kindle fire supports flash in the USA and not UK?

Why is it that Kindle fire supports flash in the USA and not UK? This is ridiculous and annoying

In silk the US version gives you the opportunity to enable or disable flash, it doesn't exist in the UK one. Speaking to amazon.com they can't understand why it's not there but speaking to amazon.co.uk they say kindle doesn't support flash. As a result my daughter can't view any flash websites, specifically the homework website we were intending her to be able to use on her new kindle. Total waste of money.

Flash work in preview but not in the browser!?

Hi there:)
I have a .swf file in a table in Dreamweaver. When I preview it in place and in Safari, it plays. When I upload eveything, it is not in any browser on the server.. any ideas?
Thanks!
V

Hi John!
Yes, sorry about that.. here it is.
http://farmingtonfarm.com/appraisal.html
Thanks for your help!!
v
Date: Thu, 8 Apr 2010 18:52:05 -0600
From: [email protected]
To: [email protected]
Subject: flash work in preview but not in the browser!?
Can't really help without a link to the site. Can you provide one?
>

Why do Outlook calendar invites appear on my iPod touch calendar but not my icloud calendar

Why do Outlook calendar invites appear on my iPod touch calendar but not my iCloud calendar? I use Outlook at work and if I want to add events to the calendar on my iPod Touch which I use as a PDA I simply create the event in outlook select my gmail email address and invite myself. The event appears on my iPod Touch...all well and good...now with the advent of iCloud I would like to see all events on my iPod calendar on the iCloud calendar that I view on my PC. At the moment only events that I have added directly onto the iPod calendar appear on the iCloud calendar.
I have messed around abit syncing and unsyncing, Turning the Calendar on and off in the iCloud setting on the device but nothing is really working. Any easy to follow suggestions or is it a trip to the geniuses in order?

Not sure why you'd want to alter an artist name anyway but...
In iTunes, right-click selected track and click "Get Info" then edit the artist field and possibly the album artist too (edit as in... make sure they have a value (the correct artist name)). Delete the faulty track on your iPod and then re-upload the new one.
Another thing is that if you left the music player open on your iPod when you add the new track, sometimes I find that it doesnt find any of the new songs you add until you close and then re-open the app on the iPod.

Create a flash video using adobe media encoder cc 2014

How to create a flash video using adobe media encoder cc 2014?

removal of FLV and F4V export features from Adobe Media Encoder, After Effects, and Premiere Pro

I would like to detect all the keyboard key is okay, but not every key can be detected by using LabVIEW example, keyboard keycode

I would like to detect all the keyboard key is okay, but not every key can be detected by LabVIEW example ( we can use 『basic input demo.vi』to detect normal key』.
I want to detect some 『hot key』 for example some keys exist in the upper part like 『search key』、『e-mail key』、『volumn control key』...etc. They are very often to be watched in some new keyboards, but we still don't know how to detect if their functions are okay.
Can we detect signals of these 『hot key』 in LabVIEW? We can apply these hot key's functions in XP, so we should detect their signal, I think, but I can't do it.
I serach some information about this question, and somebody said we can detect hot key's signal by grabing 『keybode』 these hot key feedback. But I don't know how to do these. I can't use VC. So anyone can give me a LabVIEW VI to grab keycode? Or any other solution we can detect all the key on the keyboard, including hot keys?
Thanks!
Regards,

Maybe that is the limitation of Acquire Input Data.vi.The vi can't identify the Unformal key.
You can try to use Event structure and set to listen "key down" event.
There are two terminals VKey, ScanCode will sent out the information when you press key.
There are two pictures in attached file, 2.jpg will show you the detail.
Good luck.
Attachments:
SpecialKey.zip ‏17 KB

Standard text displayed correctly in print preview but not in print

Hi,
I have a script in which a standard text has to be printed in the output.
The standard text contains some german characters.
These characters are displayed correctly in print preview but not in print.
The text is maintained in 3 languages DE,EN and Russian.
The same text is being printed in some standard report. But that is displayed correctly both in print and print preview.
Please suggest something.
Regards,
Richa Aggarwal

Hi Richa,
Check this document from SAP: [help doc|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/f0652a95-5f0b-2a10-5aba-c085f8bbe6d6?QuickLink=index&overridelayout=true]
It indicates that you have to be sure to select "Unicode" fonts for your SAPScript form to ensure the proper printing of "Unicode" characters. If a character does not display then that means it does not exist in the font that you are using.
Regards,
Ryan Crosby

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video?

Using QuickTime Pro with an .mpg movie, why can I only get it to play from the beginning, but not from any other point in the video? How can I fix this?
Baffled in SB

What format of MPG is this? Is this an MPEG1 or MPEG2 video? How was the video created?

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

I can not right click "open in new tab" nor open in new window, in my bookmark file.the bookmarks are all there, but I have to open a tab first then left click to open an item. Why can't I right click? The options are there, but not highlighted/clickable.

now it is working?! Go figure. Yeah! Thanks anyway......

Why will my pictures sync from my computer to my ipad2 but not my videos?

Why will my pictures sync from my computer to my ipad2 but not my videos?

Are you selecting them to sync in the music pane in iTunes on the computer? Are they in the correct format?
If these are videos that you shot yourself, try creating a folder for them in iPhoto - one that you can select in iTunes in order to sync. Make sure that they are in the correct format as well. Launch iTunes and click on the Movies subheading under the Library Heading on the left side. Click on one of the movies in the list and go to Advanced>Create iPad or Apple TV version and see if the movie converts.

Why would Safari 6.0.5 display Flash video using HTTPS but not using HTTP?

Similar Messages

Maybe you are looking for