Why would the font in a sticky note inexplicable get smaller?

My coworker is viewing a PDF she previously edited with no problems. When she went to open it up later, the font in many of her sticky notes was much smaller. Working with Adobe Acrobat Pro Version 11.0.06.
Any thoughts?

Thank you, I hope you can open the two following links:
https://www.dropbox.com/s/4oxjirfq9yhcmri/Tube%20Trailer%20Description%20Draft%20REV5%2008 1613.pdf
https://www.dropbox.com/s/hl9lsd4lvhq4jqs/Tube%20Trailer%20Description%20Draft%20REV5%2008 1613.docx
I hope I am not confusing you. I want the font size in the field to be the same as the font in the preceding sentence.
Thank you for staying with me.
Walter

Similar Messages

  • Why is the font in FireFox 5 not sharp as in other browsers ?

    I have been using Firefox browser since many years and have been comfortable with its features. However, of late, after I upgraded to Firefox 5, the font in the browser doesn't seem as sharp as it is in other browsers, like IE8 or Chrome 12. I have a laptop with 64-bit Windows 7 Home Premium with a 2Gb NVidia graphics card/chip.
    While all other functions are working fine in FF5, somehow when I read lengthy documents in this browser it strains my eyes. So, I end up switching to another browser like Chrome where the same page appears with much sharper fonts. Can I adjust something in FF5 settings to get the same effect ?

    Try to disable hardware acceleration.
    *Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
    If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
    See also:
    *Anti-Aliasing Tuner: https://addons.mozilla.org/firefox/addon/anti-aliasing-tuner/

  • Is there a way to change the size of a sticky note attached to a page?  I would like to make the √ l

    Is there a way to change the size of a sticky note attached to a page?  I would like to make the √ larger.  

    Yes - click on the themes button in the  toolbar and select the new size and type - depending on your selection some text may not fit the new theme - usually everything is ok
    LN

  • Why would a font appear different between Ppt for mac and mail? specifically the lower case "v"... spelled in a sequence

    I am using the Hipster Pro font... and when I use it in ppt for MAC, Evana-- the v in Evana has a swoop that extends outside and in mail it doesn't. 
    I'm not sure why this discrepancy exists as my logo doesn't have it and its causing me problems.
    When I try and do a cut/paster for this box it changes it too.
    Eva

    carmela
    Jeff is right about the two options for inserting a fonts character - but Most Importantly - he is also right in his statement (in agreement with mine) that if the audience machine does not have the font installed they will not see "Hipster Script Pro"
    Here's what ya do - make it a "PICTURE" and insert it inline, just like we do here. If this Simple Editor can display it, you should be Golden.
    If you want to show off your page design skills, the has more tools
    ÇÇÇ
    EDITaddedEXAMPLE
    Dear Bugs Bunny
    Where did you come up with the phrase "What's up, Doc?"
    With regards
    This has bee resized with the corner button-ie thingeys obtained by clicking the cursor on the image while in the editor

  • Why is the font of text fields different from document-text

    I am using forms in my pdf.
    I am inserting Text-Fields in the pdf-form.
    I set the color and size of text as the same as the document text as calibri 9.
    1) Why is the font different between the text-field and document content eventhough both are black font of size 9 and of type calibri. The font in the text-field is more gray and blurry. It doesnt look the same as the text in the rest of the document.
    2) why do the document-text font options differ from the text-field font options.
    One has only sizes with even numbers like 8, 10, 12. The other has odd numbers also. Why does the calibri font have 2 different size ranges for the text-fields and document-text/content.

    Yes you are correct, it is with the setting of the properties.
    Where do i report this then if it is not with the SDK but the manual setting of properties.
    Also, how do i alter this ussue with the SDK, what are the commands, does it have to be done only by Javascript?

  • In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame...

    In formcentral, why does the "proceed to checkout" button not work? on IE I get error " This content cannot be displayed in a frame. To help protect the security of information you enter into this website, the publisher of this content does not allow it to be displayed in a frame ". On Chrome I get nothing but loading.

    Hi,
     This error is generally specific to Internet Explorer and has two possible causes. The most likely explanation is that your browser has unusual browser security settings. I would recommend you try
    resetting your security settings to defaults (varies by version but all essentially the same). You may also have to turn off
    Protected Mode which is enabled by default on some systems. If you’re seeing this error (or a version of it) outside Internet Explorer, you may have a server-level setting that is preventing your content from being framed.
    Reference:https://social.technet.microsoft.com/Forums/exchange/en-US/1460c5a5-6242-4402-9f6b-bc581bf56478/content-cannot-be-displayed-in-a-frame-when-trying-to-add-item?forum=sharepointgeneral
    Thanks,
    Eric
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Eric Tao
    TechNet Community Support

  • Why are the fonts so small since I upgraded? I have difficulty reading folder names even when I wear my reading glasses.

    Why are the fonts so small since I upgraded? I have difficulty reading folder names even when I wear my reading glasses.

    Kirby:
    . What version of OS X?
    10.6.8 - latest Snow Leopard.
    . How are you determining the size of the Vault?
    Using Finder: "Size 5.8 MB on disk".
    . What exactly did you do that you describe as "I decided to set up a Vault to back up to the Time Machine external hard drive.".  In general, Time Machine should be on a drive dedicated to it (that is, with nothing else on it).
    Oops, right: I meant Time Capsule. Time Machine is backing up to the Time Capsule, but I thought I could also use the Time Capsule as an external hard drive as well as a target for Time Machine. So, this is a non-no?
    . How many images show up when you select "Photos" from near the top of the Library tab of the Inspector and filter using the Filter Rule "File Status" with the argument "Referenced"?
    1. Thanks for getting me to learn Aperture's "filtering" (Command-F). Cool.
    2. No images. Aha. So, do this mean all the masters are in the iPhoto library?
    But, using Finder:
    iPhoto Library: 18.2 GB 8,014 items
    Aperture Library.aplibrary: 20.6 GB 7,945 which would be right: I did some deleting after importing from iPhoto
    Aperture Vault: 5.8 MB

  • Why would the fan on my macbook be constantly runs, even when no applications are running.  Why?

    Why would the fan on my MacBook constantly run?  Even when I have no applications running?  Is there a way to determine what is causing this to happen?

    JAWade, try resetting the SMC and pram. Not always, but often those resets help problems like yours. Follow these instructions exactly.
    To reset the SMC
    Shut down the computer.
    Unplug the computer's power cord.
    Wait fifteen seconds.
    Attach the computer's power cord.
    Wait five seconds, then press the power button to turn on the computer.
    Resetting PRAM and NVRAM
    Shut down the computer.
    Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
    Turn on the computer.
    Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
    Hold the keys down until the computer restarts and you hear the startup sound for the second time.
    Release the keys.

  • Why will the iOS 7 download but not install?

    why will the iOS 7 download but not install?

    IOS 7 stinks wrote:
    I made the mistake go read the internet
    It would take a very long time to read the entire Internet. There are billions of pages.

  • Why is the week number in iCal not ISO8601?

    why is the week number in iCal not ISO8601?

    Error "The serial number is not valid for this product" | Creative Suite

  • Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Why does the content of my emails not show on the main Mail page but does in the Inbox list of all emails?

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. When the screen goes blank power On again in the normal way.] It is absolutely/appsolutely safe!

  • I get this message "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again. I have this file from when I had CS4. It worked then. I trying to make

    I get this message when I am trying to save a file that was done in CS4, now using  CS6 "Cannot save the file as the font "ArmenianLSU-italic" could not be embedded because of licensing restrictions. Turn off the pdf compatibility option and try again." Even if I start a new file I unable to save it with this font. I need to use this font.

    Then you need to outline all text before savng the PDF.
    Make sure you do this on a copy of the file.

  • Why is the Planned quantity in MCP9 not appearing(Repetitive Manufacturing)

    Sub:WHY IS THE PLANNED QUANTITY IN MCP9 NOT APPEARING(REPITITIVE MANUFACTURING
    Why are the planned orders not displayed anymore. They are still in the system - in  MD04 - but since we moved from release 3.1i to 4.0 the plan order qty disappeared  from transaction MCP9!!!!.Now we are using Version 4.7
    There must be a reason 
    Perhaps searching in  SAP OSS system -if the transaction is not supported in rel 4.0 anymore and we should use something else instead
    Or we need to apply an OSS note from SAP to repair the problem...
    Or the info system update must be modified because of rel change... I don't know.
    Please suggest your valuable guidance,Iam not able to enclose a screenshot of the problem,planned qty is 0 or it is not getting displayed.If you reply to this query i can send a detailed analysis to that mail id .

    Dear Guruji Mr.Rajesha vittal,
    Sir ,iam stuck with this problem,not able to proceed.
    Can i send the activites i have completed till now ,I want your e mial id sir for me to send the attachments to you.
    Also i dont know how to award points i need to award points to u for all the solutions i have recieved till now ,can you please explain to me
    I am stuck with this MCP9 problem i have done it according to your suggestion,but still the planned quantities are not displayed. can you please help me out.Very urgent. I need u mail id
    Thanks & Awaiting your reply
    P.S.KIRAN
    [email protected]
    [email protected]

  • Is there anyway to find a new font on Pages for iPad? The letters are hard like a rock when you use foreign languages like Thai. The fonts on device do not support foreign language.

    Is there anyway to find a new font on Pages for iPad? The letters are hard like a rock when you use foreign languages like Thai. The fonts on device do not support foreign language.

    varat_pond wrote:
    Anyone in Apple if you see this message
    These are user to user help forums.  To tell Apple you want more fonts for Thai, go here:
    http://www.apple.com/feedback/ipad.html
    But I suspect this is likely one of those things for which you will always have to use a full computer rather than a iPad.

  • Why does the password of Apple Id not paste from the clipboard at the Ipad?

    Why does the password of apple id not paste from the clipboad at The ipad 2 ?

    In most apps, you can't paste into the password field. It's a security risk.

Maybe you are looking for