Why XBTO* is visible in inbound queues monitor if it is an outbound queue

Hi all,
why XBTO* is visible in inbound queues monitor if it is an outbound queue?
Any help will be really appreciated.
Regards,
Ivá

Similar question...
XBTO and XBTS Queues

Similar Messages

  • Queues stuck in DB-Queue Monitor .

    Hi,
    I have B1if with some scenarios in my system, but i have a problem with Queue stuck.
    Under DB-Queue Monitor, i have the stuck queues, Q.INB_IQ_INTQ_ASYN_QS.0010000000 > sap.B1SysSLDSync > message(<SLDModify sysid="0010000112" company="SBO_DEPOSITO_NILDO" task="delete" /> ).
    I have checked and all IPO-Steps are active.
    Any solution????
    []'s

    Hi Priyanka,
    To clear the no send status entry, go to R3AS, select the object say for BP (Bupa_main) press enter and then execute, then open R3AM1 enter object name as Bupa_main and select Running and done and execute.
    Now you can open SMQ2 and click on each entry with nosend status and then click on activate queue in the top toolbar, this shld change the status to running and then click on refresh.
    The following is the list of Queue extensions that are used in CRM, all the queues start with these extensions:
    <b>Outbound queues</b>
    CDB*     Start queues for loads CRM -> CDB
    CRM_SITE*     Load queues for Mobile Clients
    CSA*     Send queues of CRM Server Applications
    EXT*     Start queues for loads CRM -> Ext.
    R3AI/R*     Start queues for loads from ERP Backend system
    R3AU*     Load queues CRM -> ERP Backend system
    <b>Inbound queues</b>
    CRI*     Initial load queues CRM -> CDB
    CRM_SITE*      Load queues from Mobile Clients
    R3A*     Load queues ERP Backend  -> CRM
    CSA*     Send inbound queues of CRM Server Applications
    Hope this answers ur query.
    Regards,
    Amit
    Message was edited by:
            Amit Singh

  • Queue Monitor and Inbound Adapter Tabs in RWB are empty

    Hi,
    When we process messages in PI and want to see some monitoring data in the RWB we found that some screens do not show data. (PI 7.10)
    RWB --> Message Monitoring --> Integration Engineselect a message --> Details
    Then we get a new popup with 5 tabs:
    1. Mesage Data: OK
    2 Message Content: OK
    3. Inbound Adapter: when I log in an empty screen is shown
    4. Queue Monitor: when I log in an empty screen is shown
    5. end-to-end Monitoring : ends in Java dump
    I've looked into sap help and OSS, but I can't find any hints.
    Somebody any suggestions
    Thanks in advance
    Ron

    Hi Gokhan,
    Our technical consultants are having a look into the sap note.
    We have activated end-to-end montioring and now you'll see in the message monitor of the RWB that end-to-end monitoring is available.
    You activate it with RWB --> configuration
    Hope this clarifies it.
    Best regards
    Ron

  • Queues monitoring

    Hi Experts,
    Please explain ARFCRSTATE table like --
    What are the contents that it carry?
    What runtime information we can get from this table?
    We are in the process of optimising our monitoring activities and one of the major part is queues monitoring. We are now refreshing each and every time the inbound queues to check whether there are any messages stuck in them. We are now trying to develop a program so that if the messages are stuck in queues we will be informed like an Alert through mails or something else. After searching a lot in the forums i came to know that the above table carrys the run time information about queues. but when checked i didn't find any useful information.
    Are there any pre configured programs or tables or anything in sap for this queue monitoring stuff?
    If so please give the details.
    Thanks in advance.

    You can also configure CCMS alerts to monitor inbound/ outbound queues.
    Check the below blog and find more, can help you on queue monitoring:
    http://www.sdn.sap.com/irj/scn/weblogs?blog=/cs/user/create/cs_msg%3fx-lr=cs_disc%2f2131%26x-lr2=wlg%2f2777%26page=
    --Div

  • CCMS Queue Monitoring

    Hello all,
    Can we monitor the queue length in XI and send alerts using CCMS?  Sometimes, My queues are active, but messages are piling up.  Is there a way to monitor the no. of messages in the queue and send an alert message when it reaches some limit...
    thanks.

    Hi,
    Try to use these transactions SMQ2, and SMQ1 for inbound and outbound queues
    Thanks & Regards,
    Venkat

  • XI queues - Monitoring and unlock

    Hi gurus,
    Is there any standard procedure in order to monitoring queues (input/output) in XI 3.0?
    Is there any solution to unlock queues automatically?
    I hope somebody can help me!!
    Thanks

    Hi,
    yes u can monitor queues in XI
    SMQ1-outbound queue
    SMQ2-inbound queue
    SMQ1 – qRFC Monitor for the outbound queue You use this transaction to monitor the status of the LUWs in the outbound queue and restart any hanging queues manually.
    SMQ2 – qRFC Monitor for the inbound queue. You use this transaction to monitor the status of the LUWs in the outbound queue.
    see here fro details
    http://help.sap.com/saphelp_nw04/helpdata/en/76/e12041c877f623e10000000a155106/content.htm
    Outbound Queue Administration
    http://help.sap.com/saphelp_nw04/helpdata/en/4c/cf5c3c3b067331e10000000a114084/content.htm
    Inbound Queue Administration
    http://help.sap.com/saphelp_nw04/helpdata/en/b0/df5f3c8dde1c67e10000000a114084/content.htm
    queue status fro SMQ1
    http://help.sap.com/saphelp_nw04/helpdata/en/ad/7b623c6374a865e10000000a11402f/content.htm
    queue status for SMQ2
    http://help.sap.com/saphelp_nw04/helpdata/en/d9/b9f2407b937e7fe10000000a1550b0/content.htm
    Regards
    Biplab

  • Impact of inbound and outbound queue

    Hi,
    I have created the service request in CRM and replicated to r/3, what is the impact on inbound and outbound queue of R/3 and CRM server.
    Thanks in advance

    Hi
    if the mb doc is passed to R3 ok if  not you can come to know in smw01 if it gets bounced to crm you need to check for error analysis why bounced, if it get posted R3 inbound queue to r3 is succefull if get bounced back to crm the out bound of crm is failed then depending up on error analysis you should proceed in order to proceed further how to push the transaction to r3 by clearing the middlle ware struck up
    CRM Impact is : succefully sent to r3 using mb docs by out bound quue
    R3 : if gets bounced in bound quueue is failed to receive the CRM's out bound so you need to rectify in CRM only.
    Reward for useful
    Venkat

  • Message processing not visible in RWB Message monitoring

    Hi Experts,
    There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
    Previously adapter status for this scenarios was Inactive in integration directory we taught this could be the issue and made adapter status active in Integration Directory. This did not solve the issue.
    When payload is taken and processed from test message tab under RWB-Component monitoring-Integration Engine.
    Messages are visible in RWB Message monitoring.
    Experts could you please help in finding out what could be the issue,Please let me know if any additional information is required,
    Thanks in Advacne,
    Seshu.K

    There is an issue where messages are visible at ABAP Stack(SXMB_MONI).But same messages are not visible at RWB Message monitoring Integration server(IE and AE) Level.
    Check if you have chosen the Status filter as ALL and not "Error".
    If you are loking for old messages, then you will not be able to see succesful messages beyond a particular period in the past, since all the succesful messages would have been archived.
    To see such messages, you have to choose, the option, show message from "Archive" and not "Database".

  • Adapter engine queue monitoring

    Hi All,
    I have one doubt about adapter engine queue.
    We can see adapter engine queue in  RWB->Message Monitoring-> Adapter engine-> Display  .
    Here in queue if one message goes in to system error status, remaining all messages from that queue goes on holding status.
    So unless someone manually clears this system error message, remaining messages from same queue will not be processed.
    Is there anything to automate this process? Because currently someone has to manually monitor this queue and clear the message if it is in system error.
    Thanks in advance.
    Warm Regards,
    Gouri

    Hi Bhavesh,
    I am getting a PO file from source system which contains data and control record. But target system expects two different files for data and control. So in mapping program I have done this.
    When interface split happens for one scenario and the multiple messages are going to the same receiver, an internal queue name is generated from the message ID of the original message, to ensure that the correct processing sequence is maintained. As a result, the quality of service switches from EO to EOIO. Here is the reference link:
    http://help.sap.com/saphelp_nw04/helpdata/en/28/68073c8e56f658e10000000a114084/frameset.htm
    Also can you please elaborate on CCMS?
    Thanks in advance.
    Warm Regards,
    Gouri

  • Inbound Delivery Monitor

    Hi All
    i have this situation which is confusing. Goods have been despatched using the inbound delivery transaction. Goods have been received at the requesting plant. However this inbound delivery still appears on the inbound delivery monitoring report. whats are the possible reasons fro this. Is there a report that shows if a Goods receipt has been done against a particular Inbound Delivery. Also how does one complete the C indicator for the Goods movement status at the dispatching plant. Also is the goods movement complete indicator (C) dependent on the transportation planning status
    hopefully this is recoginised and understand by someone.
    Thanks and kind regards
    Vishnu

    Vishnu
    The 'C' indicator should be set automatically by the system.
    Do you have WM?
    In my inbound delivery monitor if I select 'List inbound deliveries, I will see all of them (depending on the date range) even if they are completed.
    If you go in to the monitor and on the selection screen go down to the section titled 'Status:Inb Delivs' and in the line 'Total goods mvt status' enter 'A' to 'B' and you will only see 'Open' deliveries as the system will filter out the completed ones.
    I hope that this helps

  • Inbound idoc monitoring

    Dear all
    What tcode use for inbound idoc monitoring when data is transfer from one sap system to other sap system
    Thanks
    Amit

    Hi
    use the Tool (TCODE  <b>WE19</b>) for inbound IDoc monitoring.
    Also check the following Tcodes
    <b>BDM2</b>                 Monitoring: IDocs in Receiving Sys.
    <b>ELDM </b>                Monitoring of IDocs Processed
    IDX5                 IDoc Adapter - Monitoring
    RSEIDOCA             Active IDoc Monitoring with Workflow
    <b>WE06  </b>               Active IDoc monitoring
    Reward points if useful
    Regards
    Anji
    Message was edited by:
            Anji Reddy Vangala

  • Queue Monitor Wait

    Database: 10.1.0.2
    The event of "Queue Monitor Wait" in STATS$SYSTEM_EVENT
    is tens of times of others' event.
    aq_tm_processes is already set to 1 in init.ora
    How to improve it?
    Thanks

    v$system_event shows cumulative values since the last instance startup. You need to install statspack and get delta values to find out which events are causing problems.

  • JMS Queue monitoring

    Hi everyone,
    is there any way to monitor a jms queue with its contained messages ? i'm talking about a tool like the jmx console in jboss - the JMS Adapter and JMS Notification in the Visual Admin only provide some properties.
    Any suggestions ?

    Hi,
    In short what you want (sending email in case message has stayed too long time in the queue), is NOT possible directly. That's not a standard feature by the JMS spec.   
    What is possible is the is so-called dead messages, once the acknowledgment fails the predefined number of times then the messages will be redirected to a special queue. From there the messages can be exported by telnet.
    Check SAP note 777930 for more info. Btw, it might be a good idea to get familiar with that note, otherwise if the external server let's say always throws an exception while processing the message, it will be moved to this special queue and unless someone issues the appropriate telnet commands, nobody will understand about this.
    However if you disable this  feature, that will mean that the message will be delivered endlessly, causing CPU load. Not nice if you have doubts in your external listeners.                                                                               
    Now about the queue monitoring :
    You could create manually a periodic task (EJB timers in J2EE 1.4 which is covered in the prerelease of the next server version, or if you are using Netweaver 04s or 04s than perhaps java.util.Timer) that will periodically open a JMS browser, check the  messages in the queue, if they have stayed too long time (>100 seconds for example ?) or if the queue is too big (>100 messages) you can send manually the email alert that something has went wrong. By usage of the JAVA API that should be simple
    Another thing you can do is that inside your external listeners and the onMessage method, you could check manually the number of times the message is redelivered, if it is above some threshold (i.e . if it is 3, that means the SAP server has delivered the message 3 times , since the listener have rejected it 2 times already),then you can send the email via the standard java API. The delivery count can be retrieved by using the standard optional property JMSXDeliveryCount from the message.                                                      
    HTH
    Peter

  • Queue Monitoring

    Hi Experts,
    I got this error in SAP Queue Monitoring anyone explain me
    Error:The assert condition was violated
    Also give me some link to understand the Queue monitoring in SAP.
    Regards,
    Manigandan

    Hi Manigandan,
    I got this error in SAP Queue Monitoring anyone explain me
    Error:The assert condition was violated
    Check this thread: http://scn.sap.com/thread/1240651
    Also give me some link to understand the Queue monitoring in SAP.
    If you use SCN search you can find links like these:
    http://scn.sap.com/docs/DOC-16526
    Outside of this comminuty: http://www.****************/Tutorials/XI/XMLMessageQueues/Monitor.htm
    Regards.

  • Monitoring qRFC outbound queues

    Hi,
    I need a CCMS monitor on qRFC outbound queues (tcode SMQ1), so that I get notified whenever messages gets stuck for some reason.
    I tried with MTE class "CCMS_qRFC_Outbound_Queues_Summary", but it stays green, even after several messages are not processed in the outbound queue.
    Does anyone have experience with this?

    Read SAP Note 441269 - Setting up tRFC/qRFC monitoring in the alert monitor
    That should put you in the right direction.
    Regards
    Juan

Maybe you are looking for

  • Error message "F" using Menu Builder

    I have created two movies, saved them as .cp files and also exported them as EXE files. I inserted the the EXE versions as Items into a MenuBuilder project. I save that project as an .mpg file and exported it as an EXE file as well. What I wanted to

  • Safari 6.0.2 will not keep preferences

    I tried the Mcafee antivirus for mac and uninstalled it because I didn't like it. Well since then, my homepage, toolbar buttons, search engine, and window size preferences will not hold. after non use for period of time. my preferences change to some

  • Time code written in the audiotrack

    Dear users, i have FCP and i am going to work with the camere van Silicon Image. the SI2K. this one has no timecode reading of 25. european standard, it only has american standards. so now we thought lets write the timecode in the audio track. this r

  • SOAP Parsing Error: Server was unable to process request

    Hia, We are working on ABAP Proxy --> SAP PI 7.1 --> SOAP (Asynchronous Scenario). (ECC -> PI -> Legacy CRM) System is getting connected and able to send asynchronous messages to legacy system. But getting following error while sending synchronous er

  • Usage of wb_rt_api_exec.execute_in_background

    In wb_rt_api_exec_example.txt, the basic steps to run a map are: 1 - initialize session roles 2 - wb_rt_api_exec.open 3 - override SYSTEM params 4 - override CUSTOM params 5 - wb_rt_api_exec.execute 6 - wb_rt_api_exec.close If I wanted to use wb_rt_a