Why you can't access my order I need them to me and my wife as gift..?
why you can't access my order I need them to me and my wife as gift..?
plz
<Personal Information Edited by Host>
We are itunes users just like you.
You are not addressing Apple here.
Similar Messages
-
My Ipad was working on the internet but it now won't connect. I have tried resetting the network and turning Wifi on and off. When trying to connect it is continuously buffering. Can anyone please help?? Thanks in advance
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
I love the Rachel Maddow Show but rarely get to watch it on TV. So I rely on the podcasts to listen to every day. I've been using Stitcher but Apple's more recent Podcast app has much better functionality (downloading episodes to listen to on the subway & plane, for instance). However, for some reason (and it appears to only be TRMS podcasts), the Apple Podcast app ONLY displays the last episode. For some reason, each day, the last episode disappears from the app.
Same here! Older episodes don't necessarily disappear as soon as new ones come in; sometimes I have a few episodes on the iPhone, and can listen to them normally. But then I'll look later, and all but the latest will have disappeared. I'll have to start paying attention to discover what triggers the wipe; my guess is that syncing with iTunes does it, but I don't know yet.
Whatever the cause, it's odd. I thought that perhaps queued episodes would stick around if I partially listened to them (thus ensuring that they get actually downloaded, I'd think), but partially-viewed episodes and unviewed episodes both disappear. I can understand that an episode that never got downloaded might become unavailable after a day or few, but why would one already downloaded get automatically erased?
It's also worth noting that I don't have the problem in iTunes on the Mac. Episodes there stick around in the normal fashion. The problem is just on my iPhone, and just with this one podcast.
If anyone knows what's up, please tell! -
the billing address it's correct ! why we can't place any order for this address ? On the screen appear that the address is not correct !
Adobe Reader is free; you don't need to order it.
If you try to order another product or service I suggest to Contact Adobe Customer Care. -
Daniel or anyone else, Help on why I can't access certain jsp pages
I have installed the Web Service Portlet Wizard to build my portlets. In particular,
I have created a URL porlet jsp which receives its content from a URL.
This URL that I retrive is an application that I have running on my Weblogic 6.1
Server. I can access the login page, and can logon and do a few things but for
some reason I Can't access certain pages. The pages I can't access are also jsp
pages on the wlserver6.1 server(exactly the same as other ones I can access and
interact with).
The error I receive on the Portal Front end is attached in a word doc. I have
also included in there, a snapshot of the access log for those pages, but I can't
really make out what it is telling me (if anything!).
For one of the pages, that I can't successfully access I get java.lang.ArrayIndexOutOfBoundsException
This only happens with 1 of the pages. But trying to access the same page withouth
going thru the portal I get NO errors what so ever.
Please if anyone can give me any information on why I can't access certain pages
via my portal It would be very helpful.
Finally I have included the code of my Portlet which accesses the URL. This is
also included in the word doc.
Thanks
Ramy
[Portal.doc]Ramy,
I don't know the Web Service Portlet Wizard too well, but I notice that
login.htm never seems to be found (404 in logs). I would think that the two
warnings below your JSP call (cookies, and portlet state) are your most
likely culprits. If the Web Service Portlet Wizard does not handle cookies
then the portal server will have to continiously reauthenticate. I will
forward your email however and see if I can dig up a better diagnosis. Also,
could you post the stack trace for the ArrayIndexOutOfBoundsException you
are seeing.
Sincerely,
Daniel Selman
"Ramy" <[email protected]> wrote in message
news:[email protected]..
>
I have installed the Web Service Portlet Wizard to build my portlets. Inparticular,
I have created a URL porlet jsp which receives its content from a URL.
This URL that I retrive is an application that I have running on myWeblogic 6.1
Server. I can access the login page, and can logon and do a few things butfor
some reason I Can't access certain pages. The pages I can't access arealso jsp
pages on the wlserver6.1 server(exactly the same as other ones I canaccess and
interact with).
The error I receive on the Portal Front end is attached in a word doc. Ihave
also included in there, a snapshot of the access log for those pages, butI can't
really make out what it is telling me (if anything!).
For one of the pages, that I can't successfully access I getjava.lang.ArrayIndexOutOfBoundsException
This only happens with 1 of the pages. But trying to access the same pagewithouth
going thru the portal I get NO errors what so ever.
Please if anyone can give me any information on why I can't access certainpages
via my portal It would be very helpful.
Finally I have included the code of my Portlet which accesses the URL.This is
also included in the word doc.
Thanks
Ramy -
I get this error message"your operation could not be completed" I need help figuring out why I can not access the web page.
amarilysfl wrote:
"Your disk could not be partitioned. An error occurred while partitioning the disk".
https://www.apple.com/support/bootcamp/
If you were using Apple's BootCamp and received this message, quit it and open Disk Uility in your Applicaitons/Utilities folder.
Select the Macintosh HD partition on the left and select Erase and Erase Free Space > Zero option and let it complete (important) this will check the spare space for bad sectors that can cause issues formatting partitions.
Once it's completed, try creating a partiton again in BootCamp.
If that doesn't work, then hold command option r keys down while connected to a fast internet connection, Internet Recovery should load (spinning globe) and then in that Disk Utility, select your entire internal drive and click > First Aid > Repair Disk and Permissions.
reboot and attempt Bootcamp again.
If you still get a error, it might be that you have OS X data on the bottom area where BootCamp partition needs to go. This would occur if you had the drive or computer for a long time or wrote a large amount of files to the drive and nearly filling it up and then reduced some, but it left traces in the area BootCamp needs to go.
To fix this
BootCamp: "This disc can not be partitioned/impossible to move files."
How to safely defrag a Mac's hard drive -
"Sorry you can't access the BT Sport App and onlin...
I've been trying to login to the BT Sport app and keep getting told that I haven't activated it yet. I'm shown an activate button and when I press it I'm taken to a site where I have to log in using my My BT credentials. Upon logging in I'm shown the following message:
"Sorry you can't access the BT Sport App and online content because a BT ID created by Stephen is the account holder."
The message is completely nonsensical as I the account holder and I've logged in with valid credentials. I tried calling the helpline and am still waiting for someone to call me back, even though I called them two hours ago. What awful service.Hi W0035521,
Welcome to the community forum. Do you have more than 1 BT ID? It sounds like you have another ID that has been set up with account holder status. I can take a look at this for you. Please send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-) -
Any ideas as to why i can't access radio feature?
any ideas as to why i can't access radio feature? error message pops up
Vielen dank, léonie!
3 comments for Apple:
1. "Choose" is not linguistically clear. How about "save" or "update." "Choose" would seem to me to be related to selecting the particular music one would want to play, not to saving the un-check.
2. This is not interface-consistant with the Settings window right next door, where just closing the window works fine.
3. This doesn't explain why a cloned older slideshow with the checkbox off still played music, but with the problem solved I don't care to rabbit-hole after that issue. -
I am trying to access my calender in the app Planner Plus and I get the message. "This app does not have access to your calendars." You can enable access in Privacy Settings. But when I go to Privacy Settings, there are no apps listed under Calendar. Anyone?
Oh my gosh. This worked perfectly!!!
After allowing the changes, I just had to open the apps again (such as Instagram), then the pop-up asking to allow access to Photos appeared!
And I thought I was going to get rid of my iPhone 4 already because of the issue. -
why i can't access firefox
please try and reset the browser setting because due to few setting and secure features few sites gets blocked.
-
Why You Can't Load Some Images On Your 5th Generation ipod
Why You Can't Load some images on your 5th Gen ipod.
- OK here is the scoop: I could not load some images on my 5th gen ipod and yet other images would load no problemo. Images were JPEG, jpg, PSD (all approved image types for the 5th gen ipod)
- After doing several tests like restoring the software on the ipod, reinstalling itunes I still could not find the problem, then I noticed as soon as I would open an image in Photoshop CS2/CS3 that was otherwise loading on the ipod no problemo, when I would save that same image in Photoshop the image would not load in my ipod.
- So after playing with several settings in Photoshop I found the problem:
-In Photoshop go to File handling:
-Image Previews:
- And click on:Never Save
You do not want to save a photo with a "Image Preview" when saving any file type that you want to load on your 5th gen ipod. it would seem the ipod will not accept any images with a "Image Preview" embedded into the file, JPEG, PSD, jpg etc.
I hope this will help some of you because I just waisted a whole day to find this out the hard way.
Cheers,
Mac Fans
BTW I use a Mac Pro/Intel OSX Tiger 10.4.9Also I just found out when you are saving an image in Photoshop uncheck the " Embed Color Profile" box.
So do not embed your images with a "Preview" and DO NOT embed a "Color Profile" when saving images in Photoshop or the images MAY not load on your ipod.
Have Fun
Message was edited by: MacPro77 -
HT1338 Why I can not access to yahoo games from my Mackbook Air?
Why I can not access to yahoo games from my Mackbook Air?. I am using Mac OS X 10.7. 4.
http://jdk7.java.net/download.html
u10 fixes yahoo game problem. -
I own osx mountain lion with messages.When i go to create a new message i dont undrestand why you can send it to their email.also is it possible to send a message from my mac to another mac that has mountain lion.
MacBook, OS X Mountain Lion, help meThe recipient needs to have Messages set up with the e-mail. Check the image below:
Hope it heps.
JP -
please tell me you can get access to the messages through the sdk? Using the protocol Bluetooth (MAP)
If you're referring to iMessage, you can't.
That data is off limits. -
I have forgotten my security question answers and can not access my account settings without them. What is the answer?
Alternatives for Help Resetting Security Questions and/or Rescue Mail
1. If you have a valid rescue email address, then use this procedure:
Rescue email address and how to reset Apple ID security questions.
2. Fill out and submit this form. Select the topic, Account Security. You must
have a Rescue Email to use this option.
3. This is the only option if you do not already have a valid Rescue Email.
These are telephone numbers for contacting Apple Support in your country.
Apple ID- Contacting Apple for help with Apple ID account security. Select
the appropriate country and call. Ask to speak to the Account Security Team.
Note: If you have already forgotten your security questions, then you cannot
set up a rescue email address in order to reset them. You must set up
the rescue email address beforehand.
Your Apple ID: Manage My Apple ID.
Apple ID- All about Apple ID security questions.
Maybe you are looking for
-
The Solution is not far away but it is a big problem for me!!
If i pull a video in my timeline each time the audio dont move with. I have to select each time the audio and videoclip to move it in my track. How can i fix that? I use Prem. CC. Please Help me!!! It makes me crazy!
-
NEW MACMINI LEFT IN SLEEP MODE HAS TO BE RESTARTED 3 0R 4 TIMES A DAY
Help. I have a new macmini 2ghz intel with 2gb memory. Quite often when I return to it after an hour or so of sleep mode, I get a message on the screen advising I must shut down by turning off and restarting. There are no non apple items connected an
-
This is the plan used for my query in my prod database. 10.2.0.3 In dev same oracle version, the plan is not doing bitmap conversion. prod query time: 4minutes dev query time:20 seconds how can i tell oracle to stop bitmap conversing on me? BTW, i ha
-
Sending audio file using Mac Mail
What would be the best way to send a short audio clip using Mac Mail to recipients who all have PC's?
-
Hi, I have an amount Key Figure. Currently, it is pulling 2 decimal places. Even if I define the no. of decimal places in the BEx Tab to be 0.0000 or 0.000 or Undefined etc, it is still pulling 2 decimal places. A new requirement has come whereby fro