Why you cannot compress data while attribute change run is active?

why you cannot compress data while attribute change run is active?
Also, are there any prerequisites before running a compression.
Will the aggregates get inactive after running compression?
Regards,
Simmi

Hi Simmi,
I'm not sure what are u looking for ..???? now u are asking whther if activation starts at the same time for 2 ODS,.. there wont be any problem if the activation starts parallelly..
but these activation fails if the change run is running for the common master data. So make sure that when ever change run is running the corresponding master data will gets lock. thats the reason why u can see locks in rollup, compressions or any other parallel change runs....
Hope this helps....
Assign points if this helps.
thanks
Vishnu

Similar Messages

Difference between Activating Master Data and Attribute Change Run

Hi
Is there any difference between Atribute change run and Activating Master data functionaaly???
if wha it is???
can any one explain clearly?
Thanks
Chinna

When u load master data and its attribute to ur data target and if u change any data or attributes of ur master data,in order to update new data to ur data target attribute change run is performed.
When u create a characteristic and if u keep it as master data and activated..it is master data activation
Activating Master Data
When you update master data from an SAP system the master data is imported in an inactive state. You must activate the new master data so that it can be accessed and used for reporting purposes.
For more information, see Versioning Master Data.
Choose the path InfoObject Tree Context Menu of Corresponding Characteristic Activate Master Data.
Upon Activation there are two scenarios to choose from:
The Corresponding Master Data Is Already Being Used in Aggregates in the InfoCube:
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case, proceed as follows:
1. In the main menu, choose the path Tools Hierarchy/Attribute Change.
2. Proceed as described in System Response upon Changes to Data: Aggregate.
The system now automatically restructures and activates the master data and its aggregates.
Please note that this process can take several hours if the volume of data is relatively high. Therefore, you should simultaneously activate all of the characteristics that are affected by changes to their master data, at regular intervals.
The Corresponding Master Data Is Not Used in Aggregates:
Choose the path InfoObject Tree ® Context Menu of Corresponding Characteristic Activate.
The system now automatically activates the master data so that it can be used directly in reporting.
If there is any change r newly added records in master data..then that particular data will not b avialable for the reporting unless u do activate master data...
if u r using aggregates and then there is any change in master data ...then that particular master data change wil not b available for the reporting unless u do arrtibute change run for that info object.(T-code RSATTR)
Master data attributes and hierachies are used in cube aggregates also. So to do update the latest master data attributes values in the aggregtes attribute change run need to be performed.So Attribute change run also updates the master data attributes in aggregates which is not apart of master data activation.
Text loads do not need attribute change run. Attributes, hierarchies and aggregates need attribute/hierarchy change runs. If you do not have aggregates, just activating the master data is same as attribute change run.

Abt master data activation and attribute change run

There is any difference between master data activation and attribute change run

Hi,
Master data activation is activating the master data once you extract the data from source system the data will be in inactive state, so in order to make the data available we will activate the master data.
Attribute change run :Its used to update the newly changed master data records to the Hierachies and aggregates.
If you are already using the available master data in aggregates in InfoCubes, you cannot activate the master data individually. In this case we will use attribute change run.
For attribute change run we have direct tcode: RSATTR or In the main menu, choose the path Tools Hierarchy/Attribute Change.
regards
KP

Attribute change run---imp--urgent

hi experts,
when i am trying to run attribute change run for master data infoobject, always it gets cancelled, the reason system shows for cancelled attribute change run is "Hierarchy/Attribute change cancelled (protocol/Shortdump)"
what is the reason for this and secondly when i try to do the manual activation of that particular infoobject, it gives a pop-up window saying " The infoobject XXXX is already active" which means that though we are doing the manual activation, it is not doing the activation. Why i am strong in saying this is beacuse there were new records entered into that infoobject and after the data loading when i activate it manually because attribute change run is not running successully, it shows that infoobject data is already active.
why is it so ? what could be the reason?
would appreciate your quick responce

Hi,
Are you able to schedule the Attribute change run from Tools-> attribute Hierarchy change run? I hope you still able to see your Info object in the list.
Check the shortdump. May be you can find a clue as sometimes some aggrgetaes cause problem while adjusting. If you find such aggrgeate, deactivate it and run teh change run.
You can also check in the Attribute change run monitor. There also youw ill find clues as which aggrgeate is causing the problem.
Regards
Srini

Attribute Change Run terminating - repeated several times - not locked

I had a failure in my master data chain tonight. The attribute change run that ran yesterday ran for 11k seconds and was cancelled (it says manually). When the chain ran tonight, the process failed again. I checked the log and it says "UNCAUGHT_EXCEPTION" and it created a short dump. I tried repeating to see if it did anything and it gave me the same message.
I went into the change run monitor and reset the status and manually tried to run the change run again. Same result "UNCAUGHT_EXCEPTION".
I then checked table RSDDAGGRMODSTATE and there was no blank CNSID entries, but there was a blank "completed flag" entry. I don't have change access to the table in prod so I cannot manually change it to X (meaning closed). I reset the status again in the chagne run monitor and the record with the blank "completed flag" disappeared. I repeated the change run and it failed again and a new record with the "completed flag" being blank appeared in the RSDDAGGRMODSTATE table.
I checked SM12 and there are no locks there. I'm on 7.0 so I can't manually right click on 0CUSTOMER and activate the master data either.
As a last resort I did run the function module RSDDS_AGGR_MOD_CLOSE but that short dumped too.
Any ideas? Please? This will fail my other chains that have 0CUSTOMER in the aggregates. Thanks.

HI,
Firstly try this FM RSDDS_AGGREGATES_MAINTAIN
if not possible
Try doing it manually
Uncaught exception may come due to many reasons
IN RSA1 go to tools and select attribute change run
Check the blog it shows you how to manually do attribute change run step by Step (for BI7.0 also)
/people/debjani.das/blog/2009/03/30/attribute-change-run-acr
Regards,
MADhu.
Edited by: MadhuMarupudi on Aug 21, 2009 5:49 AM

Problem with Customer master Attribute change run

Hello Experts
Master data load process chain for 0Customer failed in system at attribute change run step.
Because of that failed instance when ever we try to reload data get error message
"Attributes of characteristic 0CUSTOMER are locked by terminated change run 468502640"
"Lock NOT set for: Loading master data attributes"
It seems that last attribute change run step had locked master data object and lock is not yet released.
Kindly advice resoluiton to this problem.
Thanks in advance
Regards
Sudeep

Failed due to lock issue. check in SM12 you can find lock with respect to your change run 468502640.
Looks like master data step is running.
Wait till the masterdata for attributes of 0CUSTOMER completes and them repeat the attribute change run step.
To repat the attribute change run
Rsa1 --> Menu Tools -->Apply Hierarchy/change run or use transaction RSATTR
Click on monitor and Start Terminated Changes Runs(monitoring of Change runs)
Here you can check the failed Attribute change run object in red status.
after completion fo the master data and check the locks and click on execute button over there.

What is Attribute change run in process chain

Hi Everyone,
Can anyone please give some information regarding "Attribute Change Run" in process chain. And how it is useful ?

Hi Aditya,
You need to schedule an attribute change run when you change master data attributes or hierarchies that are used as navigational attributes or in aggregates. There is a simple test to check if you need an aggregate change run. Load your attributes and look into the master data table (directly via SE16). If you only have entries with OBJVERS = 'A' (active) then you don't need a change run. If you have entries with OBJVERS = 'I' then you need to schedule a change run after upload.
Look at these previous threads
Re: When to use Attribute change Run
Re: Attribute Change Run
Regards,
R.Ravi

Why do some people get "you cannot save data typed into this form" using FormsCentral fillable PDF?

Hello. We're using FormsCentral extensively. We create the fillable PDF and send it to about 80 people. Each of them is adding content and saving and then passing on to another person for further content. Ultimately, all parties are happy with the content and submit. The problem is that some of the people open the PDF and get the message ""you cannot save data typed into this form". What is causing this? Please help as it is causing us many problems.

Thanks for the quick response. We distribute the form to 80 people who fill it out and create 80 versions. They then pass the form to one other person who edits. All 80 forms, once complete, are submitted to FormsCentral.
I think the problem is with Mac users. Is there anything unusual about the Mac with Adobe Reader? If you provide your email address, I can send you one of the filled out forms that is having this issue. It's quite odd in that the fillable fields don't show up until clicked on and the form is not saveable.
Thanks!

ERROR while running attribute change run.

hi sap xperts,
I got an error while running the attribute change run in a process chain.
At first i got an error "The action is locked by a change run"
SO I DID THE FOLLOWING STEPS.
1.RUN ATTRIB CHANGE RUN MANUALLY IT RUN SUCCESSFULLY,but the process chain is still red.
Q1.Is there any way to link the manually run attrib chnage to process chain so that the process chain becomes Green?
2.SM12 - realease the locks and right click the pc and repeat.It didn't work
Q1.While removing the locks what should we remove,bcoz i removed all the locks?
3.I again removed the lock and repeat the process but still i didn't work.Now its chowing "SQL ERROR OCCURED WHILE ACCESSING"
So the Process chain got stuck,Can any body help me to run the attrib chnage run.
If possible can anybody send the Process chain monitoring documents to my email id:
<email ID removed>
please.thanks in advance,i know how to say thanks in sdn.

At any point in time only one attribute change run can run in the system. The other ACR's will fail due to locks. In your case, to set the process chain to green, try the following steps.
Open the messages of a failed step by right clicking on it and selecting 'display messages'.
In the opened popup click on the tab 'Chain'.
In a parallel session goto transaction se16 for table rspcprocesslog and display the entries with the following selections:
1. copy the variant from the popup to the variante of table rspcprocesslog
2. copy the instance from the popup to the instance of table rspcprocesslog
3. copy the start date from the popup to the batchdate of table rspcprocesslog
Press F8 to display the entries of table rspcprocesslog.
Now open another session and goto transaction se37. Enter RSPC_PROCESS_FINISH as the name of the function module and run the fm in test mode.
Now copy the entries of table rspcprocesslog to the input parameters of the function module like described as follows:
1. rspcprocesslog-log_id -> i_logid
2. rspcprocesslog-type -> i_type
3. rspcprocesslog-variante -> i_variant
4. rspcprocesslog-instance -> i_instance
5. enter 'G' for parameter i_state (sets the status to green).
Now press F8 to run the fm.
The above steps will help you continue with the rest of the process chain (thus avoiding manual runs) but the failed step might still remain red. Hope this helps.

Attribute Change Run and Editing BI data

Hello Experts,
I have two questions.(They are not related to each other).
Can BI data(Infocube data) be edited?
For eg GL account in R/3 is changed from 100 to 2100. I want to know how can this be handled in BI.
Attribute Change Run in the process chain ends with error.
"Master data characteristic ZACCTNUM activated in 6 seconds. Error while activating characteristic   ZACCTNUM ". There are no more information.
   The BWREMOTE user has the authorisation to Execute Change Run.
   What could be the possible reasons for this failure.
Thanks in advance.
Regards
Meenakshi

Hi Meenakshi,
Regarding your questons:
1. You can't edit the data directly in the cube. If you have incorrect data in the cube and the data is still in the PSA you can edit the incorrect data in the PSA and you can then delete the incorrect requests from the cube. You can then reload the correct data from the PSA. If its not an option to delete individual requests you could delete the incorrect data using the selective deletion option (if you can select on the incorrect data in the cube). You could then reload the correct data from PSA or source system.
2. Please check the infoobject ZACCTNUM is active in RSD1. If it is there may be an inconsistency with the data in the infoobject ZACCTNUM, please check if the solution part of the SAP note 1033721 can help you in this case.
Best Regards,
Des.

Can we apply attribute change run for datatarget (Master data )

hi,
can we apply attribute change run for datatarget like masterdata where for example i am loading 0pm_order_attr to 0pm_order data target (master data). after successful loading of data, do i have to apply attribute change run for info object 0pm_order or apply attribute change run for 0pm_order in info providers because after successful loading of pm order data, i am trying to load transactional data and it is showing error "No SID value found for xxx record"
pls advice how not to make the error repeat even after successful loading of master data.
Thanks in advance, quick responce is greatly appreciated.

Hi all,
i am in production server and cannot activate the master data 0pm_order which is in info providers directly, is there any chance of activating it with any other option.
coming to attribute change run, i understand that we can apply for master data objects which are there in info providers, am i correct?
i ran attribute change run yesterday for the info object 0pm_order but even after doing that i tried to load transactional data but it was failure with the same error "No SID value found", why i am getting when i found master data loading successful and ran attribute change run for infoobject.

Attribute Change Run" process cannot precede process "Execute InfoPackage

hi all,
i have changed process chain, after changing the chain i have click the check button and activated. then iam getting this error
A type "Attribute Change Run" process cannot precede process "Execute InfoPackage" var. ZPAK_C0BVLUDKPEPXGXFMHQ67RFI9L in the chain.
please help me out
thanks advance
sudheer.

Hi,
Your process chain shud have the following sequence:
Start Process> Loading of master data> AND process (if u have multiple master loads)-->Attribute Change Run
And all the linkages between the processes shud only be "SUCCESSFUL". Create new variants for all processes you enter in your process chain.
Check you chain before you activate. If it gives you exlamatory sign, the also u can go ahead with activation as it is giving u just the warnings.....
Hope it'll help u.......
Preet

Attribute change run fails - "Error when deleting the data record /B05/X.."

Hello,
I get the error message "Error when deleting the data record /B05/X.." on doing the change run.
I have already done RSRV on this objects and found no errors, but still the activation fails.
please give your suggestions ASAP to fix the issue as it is on production system.
Thanks.

Attribute change run could fails due to 2 reasons-
(1) attribute xchange run is already runnnig for any toher object(monitor lock) (check by thi prog-RSDDS_CHANGERUN_MONITOR)
(2) data is loading deleting from the object on which attribut changerun is running.(go in a manage tab and check)
check this two conditions and rerun the attribute changrun again from program - RSDDS_AGGREGATES_MAINTAIN and give the master data name in the selection.
Hope it helps you.

Attribute Change Run aborted with an error :Not all data indexed for index

Hi,
I have an issue where the master data Attribute Change Run aborted with an error pointing to the BWA:
Attribute Change Run aborted with an error :Not all data indexed for index
we tried to load only 0 data into it,the error still occured.

Detail message is following:
not all data was indexed for index 'GBP_BIC:XYCH_098('0' for '114')
creation of The BIA INDEX for infocube 'YBC_SD015' terminated while filling

Master data attribute change run error

hi all,
plz tell me the procedure to overcome the masterdata attribute change run error.plz explain me with steps clearly
thanks in advance,
jack

Hi Jack,
The process of Attribute change run is just the activation of the Master data same as DSO's.
In RSA1>tools>Apply Hierarchy/Attribute change run(CRTL+F9). You can check your object for which the attribute change run has to be applied through the infoobject list.
Then execute. now the attribute change run is completed.
Please ensure the infoobject is activated.
Provide us the error message to give you more details.
Regards,
Ravi

Why you cannot compress data while attribute change run is active?

Similar Messages

Maybe you are looking for