WHY YOU SHOULD NOT USE SKYPE (and where to file co...

Approximately two weeks ago, my account was blocked for no apparent reason.
I contacted customer support and they didn't know why it was blocked, but told me to go through the account verification process. I asked to speak to someone on the phone to discuss this but was ignored. Then, within 48 hours I suddenly received a NEW email telling me that my account was blocked PERMANENTLY (funnily enough THEY CHARGED ME $25 USD for SKYPE CREDIT before blcoking me!!!). I want to make sure ALL PEOPLE KNOW about the absurd practices of Skype. I am now out $25 USD and permanently locked out my account forever. WHere can we file complaints? Better BUsiness Bureau? I have contacted my rep numerous times on how to overturn this and he just ignores me saying nothign can be done. this is absurd!!
See below from Tyron H (A horrible customer service rep I might add)
Hello,
Good Day! Unfortunately, we cannot re-activate your account. We take the safety of Skype customers very seriously and need to apply certain restrictions to protect our customers' details. We apologize for the inconvenience and appreciate your understanding.
In accordance with paragraph 11.2 of the Skype Terms of Use we have terminated your right to use the Skype software, and have prevented any further access to your Skype account.
This is because you are in breach of paragraph 6.3 (c) of the Terms of Use which prohibits the use of the Skype software to send unsolicited communications. Any Skype Credit that was in your account is non-refundable.
Best Regards,
Tyron H.
Skype Customer Service

My_Money wrote:
A class action in the United States prohibits them from doing this now (in the US) and repayed dupped users.
Hello and welcome to the Skype Community.
To clarify:
The settlement reached in the USA applies to unused Skype Credit being made available to users following a 180 day period of inactivity and is honored by Skype worldwide [except in Japan].
You are referring to a different issue - that of automatically recurring Subscription payments to which you agreed upon signing up.
http://www.skype.com/en/legal/tou/ [item 9.4]
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

Similar Messages

FAQ: Creating PDF Files from FrameMaker v.6 & earlier Documents -- Why you should not use "save as PDF"! -- Windows & MacOS Only!

An issue that has come up over and over again on several FrameMaker and Acrobat/PDF email lists as well on the corresponding Adobe User-to-User forums is that of creation of PDF files. FrameMaker 5.5.6 and 6 have what looks like a convenient feature that is supposed to allow you to create PDF files via simply saving the document as a PDF file. I have gone on record as advising end-users not to use this approach for reliable creation of PDF files from FrameMaker documents under Windows and MacOS with FrameMaker 6 and earlier. Why do I most vociferously offer this advice and why doesn't the problem get fixed? And how SHOULD you create PDF files from FrameMaker?
GOOD NEWS
I will start with the good news. The "next major version" of FrameMaker will indeed have "save as PDF" re-implemented in a manner that it will be as reliable as printing to the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS. I am personally working with the FrameMaker development organization to make sure this really happens and is fully and properly tested and debugged! Furthermore, this next major revision of FrameMaker, unlike FrameMaker 6, will come with a Distiller installer that will properly install the "Acrobat Distiller" printer instance under Windows and the "Create Adobe PDF" desktop printer on the Macintosh (of course assuring that the latest PostScript driver is also automatically and correctly installed).
DON'T USE "SAVE AS PDF"
But what's wrong with "save as PDF" as currently implemented?
The following are some of the SYMPTOMS reported over the last few years by FrameMaker users that were traced back to use of "save as PDF" under FrameMaker:
(1) No PDF file is produced at all, possibly with a log file showing not-readily apparent PostScript errors during distillation.
(2) The PDF file "loses" color in images. All or some images (raster, bitmap images, NOT vector artwork) appear in the PDF file in grayscale.
(3) The resultant PDF file is on the wrong paper size, i.e., the document's logical page size does not match the output page size as seen in Acrobat or Acrobat Reader.
(4) Some or all text in the resultant PDF file is blotchy looking or overly bold.
(5) Some or all text in the resultant PDF file cannot be searched or indexed.
(6) Some or all text in the resultant PDF file appears in Courier or in some other substitution font.
(7) Interword or intercharacter spacing is a bit irregular in the resultant PDF file.
(8) Content is missing in the margin areas of the page, i.e. you cannot do full-page bleeds.
(9) Some or all page content is missing (other than margin areas).
(10) Relatively inefficient PDF is generated.
If this list by itself isn't enough for you, please note that some of these symptoms are very subtle and may escape attention when the PDF is first viewed or printed. Oftimes, it is when one attempts to manipulate the PDF file in Acrobat or repurpose its content or even view or print on a system other than the one on which the PDF file was created, that some of these symptoms make themselves obnoxiously visible (or invisible in some cases I won't make any bad jokes here about graphic examples!).
It is important to understand that FrameMaker does NOT have its own native ability to create PDF. Any and all PDF created from FrameMaker documents is actually done by creating PostScript via the PostScript driver and having the Acrobat Distiller create PDF from that PostScript. The only exception to this is creation of PDF via the Acrobat PDFWriter driver, which is likewise not recommended (see below).
In order for "save as PDF" to work correctly, FrameMaker must do the equivalent of calling Printer Setup and selecting the "Acrobat Distiller" printer instance under Windows or the "Create Adobe PDF" desktop printer under MacOS followed by setting the driver's options correctly for paper size, page range, etc., followed by sending the proper commands to the driver to create PostScript.
Contrary to popular belief, PostScript as generated by the Windows and MacOS PostScript drivers is VERY device-dependent. The information in the PPD file associated with a printer driver instance provides critical parameters for generation of PostScript including:
Whether the printer supports color (Acrobat Distiller does)
What PostScript language level is supported (Acrobat Distiller 4.x and Acrobat Distiller 5.x are both PostScript language level 3)
Whether native TrueType support is available (Acrobat supports native TrueType as Type 42 fonts)
Available binary communications (Acrobat Distiller supports pure binary and ASCII, but NOT TCP, TBCP, or PJL)
Resident fonts (Acrobat Distiller doesn't really have resident fonts)
Available paper sizes and custom paper size availability (Acrobat Distiller supports a wide range of predefined sizes and continually variable "custom" sizes up to 200" by 200")
Margins / printable areas (for PDF and the Acrobat Distiller, there are no margins in which imaging is not permitted)
Device resolution (Acrobat Distiller can be set to any value from 72 to 4000 dpi; as a convenience, the Acrobat Distiller PPD provides a series of values for use by the driver. Since there is no inherent "resolution" of a PDF file, this parameter is used only for purposes of allowing PostScript programs that query for such a value to be satisfied and for the driver to be able to communicate this value to the operating system and/or application as required.)
Paper handling (totally irrelevant to Acrobat Distiller if input or output tray selection via "setpagedevice" is found in the PostScript stream, it is ignored by Acrobat Distiller)
Thus, if the wrong printer driver instance is selected (i.e., it isn't associated with the Acrobat Distiller PPD file) or that driver instance is improperly configured, improper PostScript will result and one or more of the symptoms described above can occur. As currently implemented, FrameMaker depending upon version will not necessarily choose the correct printer driver instance and/or correctly parameterize the print job via driver setup options. In fact, FrameMaker 5,5,6 might even try to generate PDF via calling a PCL driver, FAX driver, or even a non-PostScript inkjet printer!
DON'T USE PDFWRITER
The Acrobat PDFWriter is a relic of older versions of Acrobat. In fact, it is no longer installed by default in the "easy install" or the "typical install" of Acrobat 5. It hasn't really be updated since Acrobat 3 and only supports PDF 1.2. It is a GDI (Windows) / QuickDraw (MacOS) driver that directly generates PDF without any intermediary PostScript. Since it is not a PostScript printer driver, applications cannot pass through EPS graphics and/or PDFMark information (used for a wide variety of purposes by FrameMaker). For EPS graphics, most applications will send the low resolution TIFF (or PICT) EPS header in lieu of the PostScript text, if they send anything at all, to the driver. Forget about links, structure, or any other PDF "goodies." Expect that PDFWriter will fully "bite the dust" in the next major version of Acrobat.
SO HOW DO I GENERATE PDF FILES FROM FRAMEMAKER 6 & EARLIER?
The ONLY method that is really reliable for producing PDF files with FrameMaker 6 and earlier requires the generation of PostScript via a properly set printer driver instance associated with the Acrobat Distiller PPD and distillation of the resultant PostScript by Acrobat Distiller.
Case 1: FrameMaker and the Full Acrobat 4.05 or Acrobat 5.0x Products
PDF file from a "chapter" -- print directly to the Acrobat Distiller printer instance (Windows) or the Create Adobe PDF desktop printer (MacOS) already installed by Acrobat. If you check the "Acrobat data" option, then make sure to UNcheck the "print to file" option that gets set at the same time. As a result, the driver will automatically send the generated PostScript to the Distiller for you and delete the intermediate PostScript when done.
PDF file from a "book" -- print directly to the Acrobat Distiller printer instance with the "print to file" option checked (Windows) or the Virtual Printer desktop printer (MacOS) associated with the Distiller PPD (see details below under Case 2/MacOS). You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
In both the above sub-cases, the default driver options generally will be OK, but check on paper size and communication protocol (Use pure binary, not ASCII, for optimal performance AND no CTRL-D characters under Windows. Make sure to set Level 3 only and Binary under MacOS. Font inclusion "All" for Acrobat 4.05 and "None" for Acrobat 5 under MacOS.). With Acrobat 4.05, make sure you preset the Distiller to use the joboptions you want. With Acrobat 5, you can set this on a job-by-job basis via the driver printer setup interface (or print dialog on MacOS).
Case 2: FrameMaker 6 and the Bundled Acrobat 4.05 Distiller
Windows -- Create a new printer driver instance using the latest version of the Adobe Universal PostScript Driver Installer, downloadable from Adobe's web site AND the Acrobat Distiller PPD file (located in the XTRAS subdirectory of the Distiller directory). This driver instance should be set to print to the local port named "FILE:". Name this driver instance as "Acrobat Distiller". The default driver options generally will be OK, but check on paper size and communication protocol (use pure binary, not ASCII, for optimal performance AND no CTRL-D characters). Make sure you preset the Distiller to use the joboptions you want. Print directly to this Acrobat Distiller printer instance. Make sure that the "print to file" option is checked. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
MacOS -- Install the latest version of AdobePS 8.7.x, downloadable from Adobe's web site. In FrameMaker, go to Page Setup and select the "Virtual Printer" and go to the "Virtual Printer" window pane. Select the Acrobat Distiller PPD file (located in the XTRAS subfolder of the Distiller folder). Print directly to the "Virtual Printer" (Make sure to set Level 3 only, Binary, and font inclusion "All".). Make sure you preset the Distiller to use the joboptions you want. You will need to manually process the resultant PostScript file through the Distiller (or use a "watched folder" arrangement).
Case 3: Acrobat 3
Acrobat 3 is not officially supported for the latest OS versions and I personally would no longer recommend its use for generation of PDF files given that Acrobat 5.0.5 is the current version of Acrobat.
- Dov

You're asking a lot of ancient Acrobat to work with an Office that never existed when it was made. "Just updated my office suite" is a massive change, and Window 8 didn't exist at that time either...

Virtu MVP and why you should be using it!

What is it?
<<Lucid Virtu MVP>>
At Lucid, we believe there shouldn't be a tradeoff between performance and visual quality. We think that when you click the mouse it should interact with the screen at minimum lag or latancy. So we created the ultimate competitive weapon. Virtu MVP, designed over the winning Virtu Green GPU Virtualization software, makes your PC look better, respond faster, process video and media smoother, all within a low power environment.
Designed for next generation AMD processor based platforms, as well as Intel Sandy Bridge and Ivy Bridge platforms with notebooks, all in one PCs and desktop motherboards flavors.
Virtu MVP has 3 major components:
1. GPU Virtualization
- Enabling applications to use best of both worlds between discrete GPU and integrated one, with no limitation where your display is plugged in.
2. Virtual Vsync
- A cool technology that allows you to play with your standard in-game vsync turned on for smooth tear-free game play, but without the 60 FPS cap. Yes, you can.
3. HyperFormance
- A technology designed to further boost you game responsiveness by removing redundant rendering tasks in the pipeline resulting by higher response performance.
Overall Virtu MVP adds value to your platform and gaming experience :
•Connect your display either to the motherboard (i-mode) or to discrete GPU (d-mode), boosts gaming responsiveness up to 70%
•Increases standard in game Vsync from 60 FPS CAP - up to 120 FPS (and sometime more)
•Sharpens visual quality without tearing
•Works seamlessly with hundreds of game stations
How Virtual Vsync Works
In a virtual environment of two asymmetrical GPUs, we keep one GPU in sync and free the other GPU and CPU to run as fast is it wants. Frames are always shown tear free and in sync with display monitor while CPU and stronger GPU can produce images/frame as fast as they possibly can - so your frame is ready faster, and on time for next display refresh cycle.
How Hyperformance Works
3D games put the greatest demands on both the CPU and GPU. And as the race for higher performance on the PC and now in notebooks never ends, both CPUs and GPUs keep getting more robust. Despite this, display refresh rates have remained fairly flat over the years, 60-75 Hz, except for 3D stereo displays at 120Hz. Lucid takes advantage of this disparity and eliminates redundant rendering tasks and predicts potential synchronization issues in the graphics delivery pipeline and intelligently removes and or replaces them for better game control.
How to use it?
So long as you have a mother board that supports the use of Virtu MVP and a discrete card, beginning to use Virtu is easy!
1.) Enter bios and enable multi-moniter support, Virtu in D-mode and set the primary graphics controller to PEG.
2.) Install Lucid MVP from your cd that came with your board or from the drivers page for your board at MSI.
Updates: Lucid MVP downloads
3.) Re-boot and your off!
Note: You must originally install Virtu / Virtu MVP from the MSI disk, then you are able to update or you will recieve an error about licensing.

Quote from: xmad on 22-September-12, 02:38:45
Alright, so it is official, the z77-g45's now have Lucid MVP, as this is a software and hardward change, only new boards will be able to use this feature. (The licensing fee is also being added onto the new boards)
Hi, I know this is an old thread, but rather than start a whole new thread, I figure it is cleaner to revive this one.
I purchased a Z77A-G45 recently (2013-02) and just found out about Lucid MVP. I downloaded the installer from Softpedia, it was labeled for the Z77A-G45 Thunderbolt. It installed and even appears to be functioning, however, it is in trial mode.
Am I doing something wrong? If newer Z77A-G45s are licensed, can this not be retroactively applied to older ones? It apparently doesn't need special hardware, since it is running on my board. (Unless I do have the hardware, but Lucid MVP doesn't show up under my board's drivers on MSI's site.
For confirmation for those finding this post on Google looking to see if the Z77A-G45 is compatible (like I did), it does run, but is in trial mode. (BIOS v2.9)
Edit reason: accidently mistyped G45 as 645

Re: Virtu MVP and why you should be using it!

http://www.msi.com/product/mb/Z77A-G45.html here shows that this board have Virtu MVP support.
How can I get mine?

Quote from: marcoslei09 on 21-September-12, 15:41:17
Dear Sir/Madam: Thank you for contacting MSI Technical Support. Regarding your concern, we are very sorry. This old version can't support Virtu MVP. We will release the new version of Z77A-G45 MVP to support this function in the near future. The old mainboard need rework the BOM in factory if you want it to support. Sorry for any inconvenience. Best regards, MSI Technical Support Team!
Reply from MSI support.
Be happy, Virtu is a headache problem creator, most compatibility issues and it really needs more versatility, maybe in 1 year if they still support the product it may be better i don't have much hope for it.

The need to compress to max 1GB is obsolete. You can not determine what and how the space provided on iDisk can be used. You provide it or NOT. If you DO, then let US free, if you don't, then TELL us WHY, so we can choose to go public elsewhere. The stren

The need to compress to max 1GB is obsolete. You can not determine what and how the space provided on iDisk can be used. You provide it or NOT. If you DO, then let US free, if you don't, then TELL us WHY, so we can choose to go public elsewhere. The strengthood for Apple for the fourthfullness to be legal, which I respect, can become too restrictive in my European eyes. Any hearing around? René

As was noted in the introductory material for the Apple Support Communities website (presented when you registered), these forums are set up for user-to-user assistance and discussion, not for user-to-Apple communications.
Suggest you resubmit your position statement to Apple via product feedback for iCloud, which you can access via a link on this page -
Apple - Feedback
...we've all moved to iCloud, isn't it?
Um, no, we all haven't.

I have lost my iPad 3 (3G). I do not use iCloud and I do not have the 'Find my iPad' app installed. What can I do to find it? Is there another way to bring up a map of where it is?

Although I have Telstra 3G
I do not use iCloud and I do not have the 'Find my iPad' app installed. What can I do to find it? Is there another way to bring up a map of where it is?
I dont know the opperating system but I only got it recently...
I also have a mac book pro also without iCloud.

Without Find My iPad having been enabled on it then there isn't any way to locate it - and that would only work if it's connected to a network and hasn't been wiped or had Find My iPad disabled on it.
If you think that it was stolen then you should report it to the police. You should also contact your carrier and change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to th

When I use my IPhone 4S to view the Shaw Go Movie Central App when I am at home I only use WiFi which is automatic, I start watching a show and sometimes I will get a message like "you can not use your cellular for video playback" or something close to that. Then I received an email from Telus saying I had used my 3G instead of Wi-Fi using 75% of my data. How can this happen when I'm on Wi-Fi at home? If it switched to 3G for some reason I should have been disconnected and not just transferred to 3G network using up my data. What is the fix for this??

It doesn't have to be that complicated, Verizon iPhones come unlocked, just tell VZ you're going on Holiday/Traveling and suspend the service, no need to pay for service if you're not going to be using it. Pick up local SIM cards in the countries of your choosing, pop them in, re-activate iMessage and you're set!
I recommend getting a SIM card from the Three network in England, they have great EU roaming rates and free like-home roaming in Italy.
Set your phone's region to match the country you're in, it'll save from some headaches when calling local/international numbers.
To answer your questions,
1. If you choose not to have a local SIM card, it is good to keep your phone in Airplane mode to save battery.
2. Make sure the two iPhones have different names to reduce sync/restore issues.
3. If husband has an iPhone also, you can chat with iMessage/Facetime, just give him heads up about the new number you'll have. Otherwise, use Whatsapp if he's got an Android. You can activate Whatsapp with your American number or the international number if you choose to get a SIM in Europe.
Also, Get the MagicJack app and/or Google Hangouts, both of those apps provide you with free calling to the USA and Canada using any internet connection. Google Voice is another good way to SMS across the seas.
Let me know if you need any more tips for iPhoning across the pond.

Just finished using iTunes, closed out and then tried to get back in. Got this message "he iTunes library .itl file is locked, on a locked disk, or you do not have write permission for this file." How can I get back into iTunes ?

I just finished using iTunes, closed out and then tried to get ack in. Got this message "The iTunes library .9tl file is locked, on a locked disk, or you do not have write permission for this file." How can I get back ino iTunes ?

I actually figured it out...I had to go to the iTunes Library Extras.itdb file and give myself permission to have full control. THEN, I could go and estore a previos version. Once I had done this, I got the same message for iTunes Library Genius.itdb . . . I did the same thing with it and Voila'!!
Hope this helps...
SVT

Does windows and mac run continuously using parallel, or is there some way to stop xp from running if you are not using it?

I would like to run a few windows programs but I dont want the mac side to suffer when i am not using the windows os. Is there some way to shutdown the windows part when you are not using?

If you are running MS Windows in Parallels or Fusion or any other virtualization software you can shut it down while the machine is operating and still run OS X. There is no trick, you shut down MS Windows just like you would with any other MS Windows machine. That is one of the main advantages of virtualizaiton software, the ability to run both environments simultaneously if you want. If you don't want to run Windows then simply don't start the virtualizaiton software or if it's already running quit it like you do any app on a Mac.

If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

If you bought a used ipod and activation icloud is locked and can not get the owner how do you fix the ipod

Hi Blands02!
Here is an article that will help you troubleshoot this issue:
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Thanks for being a part of the Apple Support Communities!
Cheers,
Braden

Why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3 can do it.

why I can not connect ipad2 and iphone5 to wifi by using d-link modle? but my computer and iphone3g can do it.

iOS 6 Wifi Problems/Fixes
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting
http://www.apple.com/support/ipad/wifi/
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

Why index is not used by this table

Dear all,
Currently I'm facing problem with tuning one sql statement.
It shows that full table scan in ZTLTBC_FILTER cost 15:19.
But in table ZTLTBC_FILTER, it have index with field
index 1    MANDT INT_NAME FNAME VALUE
index 2    MANDT EXEC_ID COUNTER
index 3    MANDT INT_NAME VALUE
the last statistic date for these index is three months before
Could you please help to find out the reason why index is not used? statistics are old or small distinct value for field INT_NAME?
How to solve this full table scan problem?
Thanks & Regards,
Chris
sql statement
SELECT T_00."MANDT",T_00."EXEC_ID",T_00."COUNTER",T_00."FNAME",T_00."INT_NAME",T_00."VALUE"
FROM "ZTLTBC_FILTER" T_00
WHERE T_00."MANDT"=:A0 AND T_00."INT_NAME"=:A1 AND EXISTS
(SELECT T_100."INT_NAME"
FROM "ZTLTBC_MIRR_BUFF" T_100
WHERE T_100."MANDT"=:A2 AND T_100."INT_NAME"=:A3 AND T_100."EXEC_ID"=T_00."EXEC_ID" AND
T_100."COUNTER"=T_00."COUNTER")
| Id | Operation            | Name               | Rows | Bytes |TempSpc| Cost (%CPU)| Time     |
|   0 | SELECT STATEMENT     |                    |       |       |       |   176K(100)|          |
|* 1 | HASH JOIN RIGHT SEMI|                    | 9958K| 1111M|   598M|   176K (2)| 00:17:53 |
|* 2 |   INDEX RANGE SCAN   | ZTLTBC_MIRR_BUFF~0 | 9958K|   484M|       | 6265   (1)| 00:00:39 |
|* 3 |   TABLE ACCESS FULL | ZTLTBC_FILTER      |    13M|   822M|       |   150K (2)| 00:15:19 |
   1 - access("T_100"."EXEC_ID"="T_00"."EXEC_ID" AND "T_100"."COUNTER"="T_00"."COUNTER")
   2 - access("T_100"."MANDT"=:A2 AND "T_100"."INT_NAME"=:A3)
   3 - filter(("T_00"."INT_NAME"=:A1 AND "T_00"."MANDT"=:A0))

Hello Bret,
I'm using oracle 11.2
Thanks & Regards,
Chris

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?

How come you can not use more than 126GB of a 1.5TB diskdrive with LabVIEW Real Time?
This is only 8.3% of the available disk drive space!
http://digital.ni.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument
National Instrument's solution is either reformat you drive to less than 126GB or replace the drive with one less than that size.
Please NI, tell me you are going to fix your LabVIEW Real Time soon, and that we won't have to wait for LabVIEW RT 9.2.1 in 2011 for this one to be fixed.
http://upload.wikimedia.org/wikipedia/commons/9/90/Hard_drive_capacity_over_time.svg
Drives as large as 126GB or more have been around since about mid 2002. That's about 7 Years now and LabVIEW Real Time STILL can't use drives larger that 126GB! Please NI. Do something.
We deserve fixes to the old versions of LabVIEW RT. How about updates to LabVIEW RT. Such as 7.0.2, 7.1.2, 7.6.2, 8.0.2, 8.2.2, 8.6.2.
We don't need new features or versions of LabVIEW RT such as 9.0 until we have some of bugs fixed in the existing versions.
Kevin.
Message Edited by kmcdevitt on 05-29-2009 03:39 PM
Solved!
Go to Solution.

Coq rouge wrote:
NI is not making the Real Time OS in house. I do not remember which firm that is making it. Anyway you are allowed to use a hard drive that has been partitioned. And 126GB is some space is it not? I remember Bill Gates declared one time that 640Kb ram should be more than enough for any PC application also in the future
Coq Rouge (formerly t06afre),
The RealTime OS is an NI Product that is purchased from NI.
NI may or may not outsource design, developement, or manufacturing of the products that it sells under its own Company name.
For this reason I would be concerned if I were a PXI Embedded Controller designer/developer in the United States.
Yes, 126GB is some space. I see that there are now 2TB drives available. 126GB would be 6.3% of a new 2TB drive. Should we all be happy with being able to use 6.3% of the available drive space. Moore's Law seams to be alive and well. Drives larger than 126GB have been readily available for 5 or 6 Years. This should not be a surprise to NI. Why don't they do something about it.
Thanks for the trivia on Bill Gates. I must have missed that one since I don't try to keep up with Microsoft. I believe that he is a wonderful person and he and his family are doing wonders for the world in their "retirement". The world needs more like him.
What I do remember is Steve Jobs telling us that we would never need more that 128MB and that we would never to need to do anymore software development because everything was already in the "ToolBox".
McKevin.

I have just upgraded my account why can i not use it, it keeps redirecting me

I have just upgraded my account why can i not use it, it keeps redirecting me

Hi;
You upgraded your FormsCentral account? Can you explain what you mean that you cannot use it, what is happening, when and where are you being redirected? Did you use the same email address for the upgrade as you used to sign into this forum? We see a lot of cases where users sign into FormsCentral with one email address but then use a different during the upgrade process. Check and see if you have another email you might have used for the upgrade.
Thanks,
Josh

To transfer the data Cross the systems why we are not using BAPI Method?

Hello All,
To transfer the data Cross the systems why we are not using BAPI Method? why we are using only ALE/IDoc's?

Hi Naveen,
   Listing down those I know -
   1. Master data is expected to be changed/created less frequestly.
   2. Transactional data is expected to be chnaged/created more frequestly.
   3. Transactions to create/change/display master data do no have message control integration, since you are not supposed to print/fax/mail master data to your partners.
   4. Distribution of master data in generally supposed to happen within Enterprise boundry and typically you will have one central server maintaining master data which will be distributed to multiple downstream operation system (Some thing where MDM fits). So ideally when distributing master data using ALE you will be sending it to multiple systems.
   5. Distributing transactional data PO/SO etc is same as sending fax/print which fits with the requirement of message control.
Hope this helps,
Regards,
Sanjeev

WHY YOU SHOULD NOT USE SKYPE (and where to file co...

Similar Messages

Maybe you are looking for