Why ZM 1.10.02 firmware is not availab

Someone knows why creative have deleted this firmware from the dowloads section? There is any problem with it's
I've instaled a few days ago and I get better results than other firmware.
Will Creative release a new one?
Thanks
Excuse my english i'm from spain.

patalete wrote:
But I'm not having problems with it by the moment after a week installed, and my battery seem to plays more time than before, so the problem where partially fixed in my case, but still not reach the 2 h. only 9-0 h playback time(4 days aprox).
Yep, it's worth pointing out that not everyone is having problems with the new firmware. It's only some. Hence if you aren't having problems then it's your choice whether you downgrade or not.
The 2 hour figure comes from playing 28 kbit/s CBR MP3s continuously. If you stop and start the player over several days the standby drain will factor in and you will lose some of the energy.
When it's supossed to be released that new firmware?
There's been no date given yet, but we've not heard from Creative yet if they've isolated the problem.

Similar Messages

  • Why my firmware can not be upgraded?

    Why my firmware can not be upgraded? Do any one encounter the same problem? How can i fix It!!

    Hi BigFatCatMan,
    sorry I missed your earlier response.
    Assuming that you have tried downloading a "fresh" copy of the appropriate firmware update from http://www.apple.com/support/downloads/ and it still doesn't work, you might want to consider the firmware restoration CD process discussed at http://docs.info.apple.com/article.html?artnum=303469 and available through http://www.apple.com/support/downloads/firmwarerestorationcd13.html or http://www.apple.com/support/downloads/firmwarerestorationcd14.html (depending on precisely which MBP you have).
    Messing with firmware is always a tad risky, though, so that visit to a Genius bar might be worth trying, given the repeated anomaly.
    Rod
    Message was edited by: Rod Hagen

  • Carbon X1 2014 - New Touchpad firmware will not install

    Hi,
    Becuase of the very fiddegy Touchpad on my new Carbon X1 2014 (20A8) I was looking forward to installing the new firmware update realeased 19 Aug 2014, becuase it should address some of the annoying issues I have with the touchpad.
    According to the readme file, my computer is supported, but when I run the SynReflash.exe to upgrade, I consistently get this message back: "Reflash cannot find firmware updates for the devices on this system".
    What's wrong here?? Can you help?
    PS. Running Windows 8.1 Update 1 (x64). The UltraNav driver (18.0.7.40) is installed and working, even though I have to disable all gesture support to get a somwhat predictable mouse action when using the touchpad.
    Some help would be great.
    Thanks.

    I would like to have a response in this forum from Lenovo. We are more people with touchpad problems and issues with installing the latest firmware update for the Synaptics 'pad'.
    I checked the version of the touchpad and it's: TM-2937, FW 1581359.
    Is the firmware update not designed to work with this touchpad in my Carbon X1? If not, then why is my X1 (20A8) listed as a supported device in the firmware text file???
    Some help or clarification please.....
    Thank you.

  • Officejet Pro 8600 N911g new firmware will not install.

    My printer: Officejet Pro 8600 N911g
    Current Firmware: CLP1CN1416AR
    My problem: Downloaded the latest firmware update (Version CLP1CN1322CR). When I go to install it, my printer shows as listed, but in the STATUS cloumn, it is listed as "Not applicable".
    I turned my printer on/off.
    I tried updating via network, and when it checks for an update, it states there are no updates avaiable.
    I tried updating via USB.
    I tried updating via the LCD panel on the printer, and when it checks for an update, it states there are no updates avaiable.
    Is there something wrong as to why this current firmware will not install?
    Thanks for any help.

    New Firmware (CLP1CN1416R) was installed automatically (Printer was set for "Auto Update").  Prior to new firmware install,  printer has performed flawlessly...no problems.  Immediately after printer updated it's firmware automatically I began to have multiple problems. 
    First, it kept asking me to perform an "Alignment" which I dutifully performed only to have message come back that 'Alignment Failed".  Printed sheet looked fine, and printer printed fine but now before any page will print the "Alignment Recommended" message comes up which I have to then override (Click 'Do Not Align' button at bottome of 'Alignment Recommended' message box.  This is getting really OLD!!  Simply unacceptable for a business class printer!! 
    Also, the printer randomly has started giving other messages such as "There is a problem with the printer or ink system" AND "Cartridges are Missing" ("when I've just recently put in new catridges and levels are OK!!) AND "Paper Jam" (when there is no jam!!) 
    None of these problems have occurred prior to the automatic firmware update.  I believe the reason HP hasn't posted the new firmware update to their Customer Service website is that they know there are bugs in it and don't want to compound the problems the new version has already created.  I seriously question why an automatic updating of firmware was done with equipment set to "Auto Update" and yet that same new firmware is not available to those who might have had their printers set for "Manual Update". 
    HP Customer Service - You need to issue a statement from the company as to what has happened with this firmware update.  If there are problems, take responsibility for it and make it right.  HP knows who it sent out auto updates to.  These printer owners should be immediately notified and the situation made right.  It is not real assuring to have your front line staff not know why the new firmware is not on the website.  I do not like the idea of having to pay for a Support Call when the problems with my out of warranty printer are directly tied to the Auto Updating of said printer with apparently defective firmware.
    I'd really appreciate a response back from someone in HP Customer Service.

  • How do I update my iPhone 3G firmware but not to the latest version?

    How do I update my iPhone 3G firmware but not to the latest version?
    I currently am running 3.1 but would like to update it to the 4.1 version (not the latest 4.3 version). How do I do this? I have already gone online and downloaded the 4.1 firmware for iPhone 3G but not sure how to install it. I unzipped the file then tried to do the Shift>Update trick but none of the downloaded files could be selected. Am I doing something wrong?

    There is no official way to do what you want, that's why the files can't be selected. iOS 4.2.1 is the last officially signed firmware available for your phone. If you want to install any other firmware you'll have to go elsewhere for instructions as such cannot be discussed here, per this forum's terms of use, sorry.

  • HT1338 why the map in iphone 5 its not working here United Arab Emirates

    why the map in iphone 5 its not working here United Arab Emirates

    Am having same problem with my iphone 5 ... i can't use facebook and weather app only ... other apps are working perfectly fine ... my phone is on fw 6.0.2 and i think its my firmware problem let me know how did u resolved your's?

  • TS3694 how do you update the firmware file on the iphone 4? says it wont update because firmware is not compatible

    iphone update is saying firmware is not compatible, anybody know how to update firmware

    Pretty sure I just downloaded the .exe files to the SD card (I have a directory called "drivers" there & ran from Windows, no need to boot from anything else. Didn't even need to use Safe Boot. The files do need an .exe extension IE someimes downloads as _exe. No idea why but would just need to rename if download has the underscore and not the period. The you can run them.
    Was so easy I really did not think about it. One of the Intel Platform drives does say "requires 1.60 update" so that is the one you need. Do the 1.60, reboot, and then the Intel update.
    Key point is the release note on the Intel Platform Installer
    "Release Notes
    1.Please install the  Windows BIOS version 1.60 or higher for Encore WT8-A (PDW09x) before installing this Intel Platform Installer update." note this says "BIOS" and not "USB BIOS" which is a smaller file.

  • Cannot Restore my Ipad Firmware.Firmware restore not compatible

    Cannot Restore my Ipad Firmware.Firmware restore not compatible
    but i download lasted firmware for my ipad,4.3.5 and 4.3.4 also cannot
    what happed?i restore in DFU mode
    why i want restore:because my customer forgot password

    If you're unable to do the Restore, go into Recovery Mode per the instructions here.

  • Why isn't my iPod 6th generation not being recognized by iTunes?

    Why isn't my iPod 6th generation not being recognized by iTunes?

    Did you alresady try these suggestions? iPod not recognized in iTunes and Mac desktop and iPod not appearing in iTunes

  • Why is my adobe photoshop elements 12 not working. it says initializing and then it says there is an error and closes itself

    why is my adobe photoshop elements 12 not working. it says initializing then error and shuts itself down.

    Three things you can try:
    1. Clean the superdrive with a proprietory CD/DVD lens cleaner that uses tiny brushes.
    2. Perform an SMC reset:
    Resetting the SMC (System Management Controller) on Intel-based Macs:
    http://support.apple.com/kb/ht3964  and
    http://support.apple.com/kb/HT1237?viewlocale=en_US
    Resetting your Mac's PRAM and NVRAM:
    http://support.apple.com/kb/ht1379
    If you are using a Wireless Keyboard:
    http://support.apple.com/kb/TS3273
    3. Try the free DVD player VLC:
    http://www.videolan.org/vlc/
    which performs better than the built-in DVD Player.

  • Why will the new version of picasa not work on my imac

    Why will my upgraded version of picasa not work on my IMac???HELP
    It will start to load and then error message and cuts off. ( Picasa is photo editing software)

    Picasa is not an Apple product.
    You should ask the developers why they have not updated their application.

  • I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users.  Why are they in the libary and not in the itunes music folder. Win 7 OS

    I have 100's of CDs that I have downloaded to my itunes library and they are in the library playable but they do not show up in the C drive under the iTunes Music folder under users.  Why are they in the libary and not in the itunes music folder. Win 7 OS.  When I look in the library under the get info screen it says they are in the folder itunes music, under the c: drive but when I actually go to that folder to look for them they are not there....HELP!

    Hello RumDog,
    I think this article will help you find the media in your library.
    Where are my iTunes files located?
    http://support.apple.com/kb/ht1391
    Discovering and changing the iTunes Media folder location
    Note: You would usually only change the iTunes Media folder location to share music between accounts on the same computer. See this article for specific steps on how to accomplish this. Also, see this article if you want to know how to move your music to a new computer.
    Mac OS X: Click the iTunes menu and choose Preferences.
    Windows: Click the Edit menu and choose Preferences.
    Click the Advanced pane. iTunes displays the location of your iTunes Media folder.
    You can then:
    Note where your media folder is, such as for backing up your media.
    Use the Reset button to reset it's location to the default (which is the iTunes folder).
    Click the Change button to select a folder for a new location. Once you change this location:
    If you make a new or alternate iTunes library, the new location will be used by that library.
    Existing files will not be moved unless you choose File > Library > Organize library and choose the option to "Consolidate files."
    From: Where are my iTunes files located?
              http://support.apple.com/kb/ht1391
    Cheers,
    Sterling

  • HT200109 Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?

    Why do all my other Apple devices not care if the movie I rented from iTunes if it was downloaded directly to that device or not, but the stupid Apple TV won't allow you to play rented movies unless you rented it directly from the Apple TV?
    Great, so now I have to airplay it by linking my computer to my Apple TV and then the movie has to buffer! So, all that time I spent downloading the HD video has to technically "download" again by buffering. The more I use Apple TV, the more I feel like this item was not created by Apple. I don't even use it for what I originally purchased it for. If I would have known that anytime I wanted to sync a movie from my computer to Apple TV by using airplay that it would have to buffer the movie, I would have never ever ever ever ever purchased this waste of time device. So the video has to technically play all the way through one time first so Apple TV can "remember" the movie to play it back in real time afterwards.
    Am I missing something here? Am I doing something wrong that can be fixing my problem? I should have known that the Apple TV had so many things backwards when simple things like when you are using the remote and you reach the bottom of your list, in order to cycle back to the top of your list you have then press the directional buton back the other way rather than most modern day devices that will automatically cycle you back to the top or to the other side when you reached the bottom or end but keep on pressing the button. That **** annoys me when I am doing a search for a movie and have to type the name in manually and have to cycle back and forth to the letters. It makes me feel like I am using a rotary phone or something!

    I was told by someone to try and purchase something directly from my Apple TV and that will help authorize my Apple TV.  So I picked something that was free and it downloaded.
    Then I went back to the Movie that would not work and it played just fine. 
    So it seemed to work.  I will have to try it on other movies and TV shows later.

  • Why can I sync a movie but not TV shows on my nano (7th gen)?

    I am using iTunes 11.0 and can sync a movie (Miracle on 34th Street) to my new ipod nano 7th gen but when I try a TV Show (a Planet Earth HD episode) or even a brief video clip taken with my camara I am told that such an action is not permitted on this ipod.  So why can I sync a movie but not TV shows on my nano (7th gen)?  Thank you.

    Before you can sync video files, it must be converted into a format compatible with ipod.  If you can’t sync a video convert it by doing the following:
    In iTunes, select the video you want to convert. Do one of the following then sync again after:
    1) Choose File > Create New Version > Create iPod or iPhone Version.
    2) Choose File > Create New Version > Create iPad or Apple TV Version.
    I hope this works.

  • Why is the week number in iCal not ISO8601?

    why is the week number in iCal not ISO8601?

    Error "The serial number is not valid for this product" | Creative Suite

Maybe you are looking for