WI_Actual_agent in the Workflow is empty (Rescan function)

Hi @ all!
I have the following Problem.
I create a workflow for FI with the option to rescan the complete bill.
In the step "Record Document" the user should have the opportunity to ask for a rescan of the bill. These should work over the inbox option "reject execution". So i generate a new workflow container element (Invoice Record Agent) to save the actual user (WI_ACTUAL_AGENT) over the binding at the first step. Than i put these element (Invoice Record Agent) to the Rescan expression. But when i select the option "reject execution" the inbox of the first user is empty. So I search for these element in "swia" and discover that the Invoice Record Agent element is empty.
What i am doing wrong? Why is the element empty?
Please help.
THX
Regards
Phil

Hello,
"When i push the reject button the Element is empty"
What does the reject button do? Skip execution? If it's something like that and you want to store who pressed the button in the workflow then you could store the agent the workitem was sent to in workflow before the step, and fill the container element afterwards. This gets more complicated if it was sent to more than one agent.
regards
Rick Bakker
Hanabi Technology

Similar Messages

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud

I have created PDF from hardcopy by using my scanner. After I run OCR option for my PDF by using Acrobat Pro 9. But "Text-to-speech" functionality of the PDF says that an error message comes up that says the page is empty when I turns on the read out loud option in Acrobat. Kindly help me to sortout this problems?

So I tried generating the same PDFs on two other computers that have Acrobat 9 Pro. Results were reproduced. The verdict is:
- complex PDF files (that is, containing cross-references, tables of contents, and bookmarks) generated by Acrobat 9.x Pro are roughly 2-5x larger than the identical file generated with Acrobat 8.x Pro.
- different PDF conversion settings make a negligable difference (less than 10% rather than 70-80%).
- using the "Reduce File Size" or "Optimize PDF" option cuts the file size roughly in half, almost always resulting in a "image downsampling mask" warning message, which requires acknowledgement (that is a problem for batch processing or automation).
- adding an Acrobat watermark to the file cuts the file size roughly in half.
- just using Save As to another filename has no effect on file size.
- generating the PDF in Acrobat 9 with links but no PDF bookmarks still results in the inflated file size.
- generating the PDF in Acrobat 9 without any links or bookmarks results in approximately the same file size as the Acrobat 8 PDF with full links and bookmarks.
It appears that Acrobat 9's manner of adding links is what's bloating the files, and in my case it's probably not related to images or image resolution/print quality. It's a shame, because Acrobat 9 seems to have made some improvements to the Review Tracker interface, and a few other bells and whistles which I haven't really gotten around to exporing yet. But unless I find a way to keep my links and the PDF file sizes comparable to what I was getting with Acrobat 8 Pro, it looks like I'm going to stay with Acrobat 8.

When I downloaded 6 I lost the "Empty Cache" function. The "Reset" function is still the same, though. How do I get the empty cache back?

When I downloaded Safari 6 I lost the "Empty Cache" function. The Reset function is still the same as 5.7. How do I get the empty cache back?

Empty Caches
Safari > Preference > Advanced
Checkmark the box for "Show Develop menu in menu bar".
Develop menu will appear in the Safari menu bar.
Click Develop and select "Empty Caches" from the dropdown.
Best.

Unable to create rule Error:Function Module does not meet the workflow conv

Hi Workflow experts,
Could any one help me with rule creation. Below is my Function Module Interface.
""Local Interface:
*" TABLES
*"      AC_CONTAINER STRUCTURE SWCONT OPTIONAL
*"      ACTOR_TAB STRUCTURE SWHACTOR OPTIONAL
*" EXCEPTIONS
*"      NOBODY_FOUND
The function module test is successful with all required conventions for workflow but while i try to create a rule with the funtion module i get the error "Function Module does not meet the workflow conventions"
I Also have included the following in FM
INCLUDE <cntn01>.
Any suggestions would be helpful. Thanks in Advance,
Imran

Hi,
I am not sure whether the rule accepts the optional flag. Remove the optional flag for the tables parameters and try again. According to the documentation you have implemented the right interface. It might be the issue with the tables parameter being optional.
Hope this helps,
Sudhi

Another network issue... C4780 - The wireless radio is not functioning. Contact HP support.

Hi,
I've trawled the forum for an answer to this and searched Google until I'm ready to drop the printer from a height.
A long time ago my printer "lost" its ability to carry out any functions wirelessly, which is a shame because it was the wireless capability that sold it to me, over similar models at the time. I coped with it, doing things the old fashioned way, more because I wanted to avoid spending an entire day messing around with it ...until today! Well, I've started so I'll finish (hopefully) as having wireless printing back would improve my workflow.
The error I'm struggling with is this one, when I attempt to configure printer for wireless:
The wireless radio is not functioning. Contact HP support.
I know others have had this issue, as my forum searches show and that for some people a solution was to reset the printer by holding in certain numbers on the keypad. However, that thread does not explain how to reset the printer if it has no keypad, i.e. mine, the C4780.
Anyone know how to do this? Better still, is there a fix out there for what seems to be a common and recurring issue for HP products right across the board?
Thanks in advance!

I just sent you a private message. If you are not sure how to check your forum messages, this post has instructions.
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

Cannot see the Workflow process in Application.

Hi ,
We have a strange issue with workflow.
We wanted to customize the INVFLXWF workflow .
We downloaded it from the apps into WorkFlow Builder.Added a process and a function.Saved it back into the database.
Now , when you go into the application --> System Administrator --> Application --> Flexfield --> Accounts --> ctrl F11 -
and you dont se the workflow Generate Cost of Goods Sold Account .
Only if we see it then only we can change the Process Name to the newly created process.
What puzzles us is that the AP Process calls the Generate Cost of Goods Sold Account and generates the COGS account .But we wanted to change it.Without seeign it in the application we cannot change the process.
Can anybody help?

Hi Andrew,
Thanks again a lot for the help. It has really helped. Now I am trying to get a better understanding of how the platform, SCC and the simulator need to be configured.
Let me write down some of my learnings:
If one does not see the workflow then the following points should be checked.
1. Check whether the simulator and the MDS are running properly or not. Like in my case I had installed MDS and 9800 simulator by getting 2 seperate installables. But later I got the BB 6.0 JDE and installed that. Probably this helped me out.
2. If you dont see one of your already developed workflows not in the Simulator then develop a new workflow and try syncing that to the simulator. As you have shown it to Tapan one can get it from http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8028374d-6490-2e10-5391-b3cb0310ad1d?QuickLink=index&overridelayout=true and https://cw.sdn.sap.com/cw/groups/sup-apps?view=documents
For me I was not able to move my already developed workflow to the simulator. Then I tried to get the EmpDir2_0_ESD1 from the above mentioned link and then this worked. Probably some error in my workflow. So try generating a new workflow and move that to the simulator
3. If MDS does not comeup then it may be because you have installed it in C:Program Files. So better install the BB JDE in some other folder where you have write permission. This information I got from StackFlow.
Hope this may help some novice like me...
Thanks again Andrew...
Best Regards
Tapas

How to use the workflow in the pm notification?

Hi, guys
who can tell me how to use the workflow in the PM notification?
ths!

hi
you can refer the following links
[Preparation and Customizing|http://help.sap.com/saphelp_47x200/helpdata/en/7b/b7410e53b211d38abd0000e8284931/content.htm]
[Operation and Link to Application Functions|http://help.sap.com/saphelp_47x200/helpdata/en/2e/f1ab4456ca11d38ac30000e8284931/content.htm]
regards
thyagarajan

How to use the method for field-exit to trigger the workflow?

Dear all,
     I want the workflow to trigger , when ever the check box for DELIVERY COMPLETED is checked in ME22N .
     I have developed a method in SE18 for the corresponding field and defined function module SWE_EVENT_CREATE with BOR bus2012 and event CHANGED.
    Now how to use this method to make my workflow to trigger?Shall I create an event in delegated bus2012 and can I call this method?
Thanks and regards,
S.Suresh

Hi
You want to place your method which is defined for particular filed.right?
For that you can go for BADI. First you check whether any badi is getting called form that tcode ME22N. Then to place your method, implement that BADI. So whenever that BADI is getting called, it will call your event. Through Event workflow will be getting triggered.
Regards,
Hemalatha.

Queries regarding the workflow

Hi guys
I have created a workflow definition in SWDD and creted a object in SWO1 with an event. this event i linked to the workflow in tepe linkage table also. I tried to trigger the event from the abap report program .I have used standard FM SWE_EVENT_CREATE. I have added the FM SWW_WI_CREATE_VIA_EVENT as the receiver FM in the event.
But still when i run the report i can not see this event in event trace. When i debugged the program i have found that the Event id is generated by the FM SWE_EVENT_CREATE.
Do i have to add anything to the program or anything to be added to the event. PLease let me know
thanks
sankar

hi
i am giving my code here:
REPORT ZEMPWORKFLOW.
PARAMETERS : empid type ZEMPID obligatory,
             empname type ZEMPNAME obligatory,
             empDOB type ZEMPDOB obligatory,
             empcont type ZEMPCOUNTRY obligatory.
INCLUDE <cntn01>.
DATA: objtype LIKE swetypecou-objtype,
      event   LIKE swetypecou-event,
      objkey LIKE sweinstcou-objkey,
      eventid LIKE swedumevid-evtid,
      creator LIKE swhactor.
objtype = 'ZEMPLOYEE'.
event = 'UPDATE'.
clear objkey.
objkey(10) = empid.
swc_container z_container.
swc_create_container z_container.
swc_set_element z_container 'empid' empid.
swc_set_element z_container 'empname' empname.
swc_set_element z_container 'empdob' empDOB.
             CALL FUNCTION 'SWE_EVENT_CREATE'
               EXPORTING
                 OBJTYPE                       = objtype
                 OBJKEY                        = objkey
                 EVENT                         = event
             IMPORTING
                EVENT_ID                      = eventid
             TABLES
                EVENT_CONTAINER               = z_container
             EXCEPTIONS
                OBJTYPE_NOT_FOUND             = 1
               OTHERS                        = 2.
IF sy-subrc = 0.
COMMIT WORK.
WRITE:/ 'Your event was created.'.
ELSE.
WRITE:/ 'There was an error creating the event.'.
ENDIF.
please tell me if you need any more info.
thanks
sankar

Scope Of ABAP Programming in the WorkFlow

Can any one tell me the scope of programming in the workflow and also the way to start it.

Amit:
Not sure what you mean by "scope", but anyway .....
You can call a function module as a workflow task. Once in the function module, you can write as much ABAP as you want. In terms of data available, any parameters / values you want to access and / or modify within the called function module has to be passed in the workflow container.
Suggested reading is Practical Workflow for SAP available from SAP Press: link is http://www.sap-press.com/H950.html Also try the following links for more documentation:
https://sapneth9.wdf.sap.corp/workflow
http://help.sap.com/saphelp_webas620/helpdata/en/a5/172437130e0d09e10000009b38f839/frameset.htm
Regards,
D.

How to trigger the workflow from the excel sheet

hello friends,
my problem is that i should trigger the workflow from a excel sheet which contains a list of appraisers and appraisees.how to do this. can anyone help on this.
thanks.

Hi Murthy,
If you are asking if a workflow can be started on R/3 while in Excel - may be possible if you can develop some fancy macros that can make RFC calls to an ABAP function module. I won't even attempt to travel that route.
Save the excel sheet as CSV or Tab delimited file and process it using ABAP. You can use the WAPI function module SAP_WAPI_CREATE_EVENT (Rel 4.7)to start the Workflow by raising the relevant event. In earlier releases, see FM SWE_EVENT_CREATE.
Please do keep in mind there could be performance and response time issues for dialog users of the system if you are going to start several workflows using a report program.
Cheers,
Ramki.

Can't use the Calendar, Book, and Card functions

I have updated my iLife programs to iLife 08 and cannot use the Calendar, Book, and Card functions as the program says the themes have not been installed. However, after looking in the Library/Applications Support/iPhoto folder, the themes are there but not being recognized by the program. I have reinstalled iLife 08 but still to no avail. Help!

Grant:
Try the following:
A. look for a folder title Themes in the User/Library/Application Support/iPhoto folder. If you find one there move it to the HD/Library/Application Support/iPhoto folder and reboot.
If that doesn't jump start iPhoto then go on to B.
B.
Restoring iPhoto Themes
1 - delete the current application.
2 - delete any files with iPhoto in the file name that reside in your HD/Library/Receipts folder.
3 - delete the Themes folder from your User/Library/Application Support/iPhoto folder.
Also look in the HD/Library/Application Support/iPhoto folder for a Themes folder. If there is one there then delete it also.
5 - boot into the system disk that came with your computer and do a custom install selecting only iPhoto.
After installing reinstall the iPhoto 7.1.1 updater again followed by a repair of disk permissions with Disk Utility. Also make sure you're running the latest Quicktime, 7.3.
TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
I've created an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries and Leopard. iPhoto does not have to be closed to run the application, just idle. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

Where do we need to chage in the workflow for the follwoing problem

development will need to adjust the existing code to pull email address from 105 currently the email address is derived from [email protected] Greg will provide update on this item

There may be a mail-sending step that simply specified that the initiator is the receiver of the e-mail. You have several possibilities for changing this.
If you have an employee object in the workflow container you can enhance the BOR object type (i.e. create a subtype and delegate to this subtype) with a virtual attribute in which you hold the e-mail address, which you find using the aforementioned function module.
Alternatively you can create a method for the main object type of your workflow and make it return the e-mail address.
In any case you then bind your virtual attribute/returned e-mail address to the recipient field (task container element) of the mail-sending step. Some

MRP generated Automatic PR creation is not trigerring the Workflow.

Dear Experts,
In our Implementation we are using workflow for Purchase Requsition. The release strategy is configured by the functional consutant. For the MRP generated PR the first releasig point is MRP controller and the PR type is Custom type MRP PR. If we create the PR manually with the said PR type the workflow is getting triggered ( checked in SWI1) and sending the E-mail notification like other types of PR like Invertory and Capex PR.
But while running the MRP, some PRs of MRP PR type with same releasing point are being created automatically for the material (Raw, Packging) as per the setting of reorder level but these PRs triggering the workflow as it did while creating maually. Please guide / suggest me how I have to trigger the work flow for Automatic MRP generated PR.
Reagrds
Sony

Your query is not clear. Does the workflow initiator is different for the 2 PRs.
Thanks
Arghadip

How do I recover search bar and empty cache function in Safari?

My search bar function is gone from Safari and my empty cache function is gone from Safari after the last update. I only get the URL bar. I've tried deleting and then dragging the toolbar items back in. doesn't work. Any help would be appreciated.

Thanks. I was afraid of that. Don't like it. Any idea why I don't have an empty cache function under the Safari drop down menu?

WI_Actual_agent in the Workflow is empty (Rescan function)

Similar Messages

Maybe you are looking for