WI-FI Adapter on CPU(without any wi-fi platform), then not support this function.

I have router Sagemcom FASTv7, support wi-fi hot-spot, but not have wi-fi
adapter. Can i make with virtualization or with something else, wi-fi adapter for this CPU?

you cannot use wifi with virtualization u have to use local ethernet to access virtualization.
Akshay Pate
I don't understand your. I mean that my router may gave wi-fi to other, but it haven't to get wi-fi from other ..... In now days on noutbooks with only wi-fi(get wi-fi), i use command to create share wi-fi, if driver of the virtual wi-fi
in device manager driver teesting on microsoft soft(digital vertification......) . Can i may use this plan to my sittuation with stationare computer without any wi-fi platform, but having share wi-fi with router those connect to my cpu
thru ethernet?

Similar Messages

3rd node is taking 15% of CPU without any load and connection on the server

Hi,
I am struggling to resolve the 3rd node is taking 15% of CPU without any load and connection on the server. but not find clues for this. Please give me some inputs.
The issue is:
We have 8 databases on our 3node RAC (11.2.0.1). One of the performance team guy reported that 3rd node is taking 15%cpu utilization when there is no load and connection to the database and at that time the other 2 node are taking only 1%cpu. even i have checked it by using top command and it is almost given same results.
To come out of this issue, i have two solution in my mind, but i am not sure whether this approach is good or bad. the plans are
(1). shutdown the databases and check the cpu usage. --to findout is there any thing wrong with Kernel parameters or at system level.
(2). Shutdown the databases and CRS on the 3rd node and reboot the server.
If above process is correct then i need to take permission from my manager.
I am total stuck, what i need to do. Is there any other approach to resolve this issue. Please help me, this is very critical issue for me.
Also i have checked from GV$SESSION for the active session, but i didn't find any connection apart from oracle processes.
Thanks in advance.

Thank you Guzma for your suggestion,
When i checked the gv$session for the active sessions from only 2databases, Do i need to check in all the databases and make sure there are no active session and try for the 1st solution.
-more over i have observed that one of the oracle process is taking 99% of the 15%cpu when i checked from top command. i have tried to find out the what the session is from below, but it given no results from the 2of the DB's.
top - 13:43:27 up 28 days, 2:44, 1 user, load average: 8.62, 7.90, 6.46
Tasks: 1275 total, 11 running, 1264 sleeping, 0 stopped, 0 zombie
Cpu(s): 37.3%us, 6.9%sy, 0.0%ni, 44.3%id, 3.9%wa, 0.2%hi, 7.4%si, 0.0%st
Mem: 32830792k total, 32440660k used, 390132k free, 2888k buffers
Swap: 32764556k total, 9553692k used, 23210864k free, 20920068k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
17870 oracle 25 0 4254m 111m 102m R 94.6 0.3 35345:34 oracle
8332 oracle 15 0 9151m 676m 639m R 27.9 2.1 2:03.00 oracle
18062 oracle -2 0 9151m 4.5g 4.5g S 13.5 14.5 3049:49 oracle
18058 oracle -2 0 9151m 4.5g 4.5g S 12.8 14.5 2948:39 oracle
SQL>select p.spid,s.sid,s.serial#,s.username,s.status,s.last_call_et,p.program,p.terminal,logon_time,module,s.osuser
from gV$process p,gV$session s where s.paddr = p.addr and p.spid=17870 ; 2
no rows selected.
in database level, will some of the session or processes hangups fro some reason?
thanks,
Hari

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If version 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I have an Ada executable that's creating a buffer of data that's being fed to a Labview executable that's displaying the data in a GUI. We're re-architecting some legacy system hardware and I'm just trying to figure out if this configuration is even possible.
Thanks

Hi,
I never heard of LabVIEW6.5. I only know of LV6i, LV6.1 and LV7.0...
Why don't you just call your next/regional NI sales rep?
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Is it possible to run Labview ver 6.5 with PowerPC as the target CPU and VxWorks as the target operating system? If Labview ver 6.5 does not support this configuration, do any of the later versions support it?

Is it possible to run Labview version 6.5 with PowerPC as the target CPU and VxWorks as the target operating system?
If version 6.5 does not support this configuration, do any of the later versions support it?
I basically have an Ada executable and Labview executable that currently run on a Sun Machine with Solaris as the operating system. I'm re-architecting the system hardware and will be getting rid of the Sun Machine and Solaris. I'm don't have any issues with the Ada executable, but I'm not sure what configurations Labview supports.

duplicate post
In the future, please don't try to stuff your message in the subject line. Thanks.

Not Support this type of CPU: 0f33

Hi. After I flashed the BIOS to version 2, I get this error message "Not support this type of CPU: 0f33". I can't get to a floppy drive or CMOS to recover the flash.
Has anyone else encountered this and if so, how did you get around it to recover?
Thx
MikeC

MB MSI 848P Neo
1 GB RAM
Intel 2.8 CPU
120 MB Hard Drive
Found this article and tried it. But still cannot get to anything. Have a bootable floppy with the old bios version but cannot get to the floppy to boot it. The MB just hangs on the screen display "Not support this typs of CPU:0F33". Any help would be great.
Thx
Rename the desired AMI BIOS file to AMIBOOT.ROM and save it on a floppy disk. e.g. Rename A569MS23.ROM to AMIBOOT.ROM
Insert this floppy disk in the floppy drive. Turn On the system and press and hold Ctrl-Home to force update. It will read the AMIBOOT.ROM file and recover the BIOS from the A drive.
When 4 beeps are heard you may remove the floppy disk and restart the computer.

"The iPod software update server could not be contacted. The Server does not support this version of iTunes." Any thoughts? Also, iPod will not turn or or charge (tried in my laptop, house computer and dock) I have all the lastest updates to my knowledge

"iPod software update server could not be contacted. The Server does not support this version of iTunes." iPod will not turn on or charge or reset settings. I tried plugging it in my laptop, house computer and docking station to charge and nothing. Also, I have all the latest software updates to my knowledge. This is a classic 8GB iPod, running of Windows 7. Any thoughts/suggestions?

only thing that seems to work so far is syncing without photos and also check here https://discussions.apple.com/thread/3206849?start=30&tstart=0

I am having issues with my iphone6 bluetooth connection in my car. When going to settings under bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution yet?

I am having issues with my iphone6 Bluetooth connection in my 2013 Mercedes C Class. When going to settings under Bluetooth, it is unable to find any devices. I did not have this issue until I downloaded IOS 8.0.2. Do you know if there has been any resolution from Apple yet?

Hi susan from WSL,
Welcome to the Apple Support Communities!
I understand that when your Bluetooth accessories, such as your car connection, do not work as expected it can be very frustrating. In this situation, I would recommend working through the troubleshooting steps provided in the attached article.
If you can’t use a Bluetooth accessory or car kit
Cheers,
Joe

I updated my iphone to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!1

i updated my iphone to ios 6. now i can not charge my phone with any cable. it says charging do not support this accessory. what should i do now? can anyone help please!!!!!!!

I upgraded my iPhone 4 last evening to iOS 6, the upgrade completed and the device was usable. Then in the morning I went to the device to check E-mail, Voice Messages, Test Messages, etc... and the phone was dead. I tried plugging the device into a charger (for a couple of hours) - still dead. Plugged into computer with iTunes, device not recognized or discovered, and iPhone was still dead... Took the iPhone into an Apple Store and the Technician looked it over for any visible signs of defect/malfunction, then performed various tasks to breathe life into the phone - nothing... His suggestion, at this point, was to replace the phone. He speculated that the iOS upgrade possibly corrupted the iPhone's charging firmware, and that this device was now a BRICK. Keep in mind that the phone and it's charging abilities were perfectly fine prior to the iOS Upgrade. I hate to go through the replacement hassle and the cost ($159.00) when the iOS upgrade caused the problem. Any suggestions? Thanks!

Before starting AHT, be sure to disconnect all external devices except the keyboard, mouse, display, and Ethernet adapter. Also disconnect any external optical drives. What does this include?

Before starting AHT, be sure to disconnect all external devices except the keyboard, mouse, display, and Ethernet adapter. Also disconnect any external optical drives. What is included in these external devices?

I have tried repeatedly to use the Apple Hardware test on my iMac desktop 10.7.3 early 2009 4 GB with no luck. What am I doing wrong? I have everything I can think of unplugged. Do I need to disconnect BlueTooth in Preferences?
Thanks

CHARM without any project assignment possible or not ????

Hi ,
can we create transaction request through solution manager having charm configured without assignment of any maintenance project.
i n details : i config. charm for managing all daily transaction request from it. for that i was created a Zabc maintenance project.
so now when ever any new developments come on service desk request it will call for change management request from their and
after approval developer will create a TR which by default comes under project Zabc for maintenance cycle M0000XX.
Now i want to get either multiple option to choose different projects or without project . can any one confirm is it possible to create any TR (Dev) without any project assignment or not. If yes please let me know.
Regards
Andrew.
Edited by: Andrew lee on Jul 9, 2009 9:32 AM

Maintenance Project are used for Maintenance on your "live" business scenarios, checked out from your solution.
Implementation, Template are used for implementing new functionallity, into a new solution, or additional to a solution.
Upgrade projects speak for themselves.
If you start with Maintenance/Implementation/Upgrade/Template projects, as soon as you activate ChaRM (option in SOLAR_PROJECT_ADMIN) your are supposed to create a Maintenance Cycle. In relation to the type of project a certain tasklist is created, and thus a maintenance/development cycle is created.
To those cycles the individual, change documents are "attached" to get a release kind of working.
So you must have any cycle, Maintenance or Development or Upgrade.
Kind regards.

I have a IMac 7.1 Intel and trying to download vidoes to an Ipad version 5.1.1 - i keep getting error's stating that the ipad does not support this version - any suggestions?

I have an Imac 7.1 intel and trying to download videos into an Ipad - I keep getting error messages that states not supported - any ideas?

What is a 7.1 intel?

I am trying to use sites on the internet which require Adobe Flash Player, but when I click on the free download, it says that Apple does not support this application, so I cannot use it. This stops me viewing quite a few interesting things. Any ideas?

I am trying to use sites on the internet which require Adobe Flash Player, and when I click for a free download it says that "it is not available for your device because of restrictions that Apple has put in place". Any suggestions on how to overcome this?

Flash is not, and probably never will be, supported on the iPad : http://www.apple.com/hotnews/thoughts-on-flash/ . Plus it would be up to Adobe to make a version of their flash player that works on iOS devices, something which they have never managed to do and which they have now given up on trying to do.
Browser apps such as Skyfire, iSwifter and Puffin 'work' on some sites, but judging by their reviews not all sites. Also some websites, especially news sites, have their own apps in the App Store, so your could try checking there for your sites (and there is the built-in YouTube app).

Any word on 'Load Indicator Not Supported' error?

Has anyone figured this one out yet? According to the Admin
Guide, the MAX_DUMP_FILE_SIZE will only control the trace files,
not the alert file. It CAN be safely deleted, even with the
instance up.
What a pain :(
null

I also have this problem and it is sort of solved by disabling the Multi Threaded Server option.
Solution #1
Disable MTS by removing the parameter MTS_SERVERS from the init.ora file and any other MTS parameters
Note: You will still get the Load indicator error by it will not repeat in your alert log file. and it appears only at startup for the database
Solution #2
If you absolutely need MTS then set the init.ora parameter MAX_DUMP_FILE_SIZE very large so that your server will not crash by populating your alert.log file with the load indiator error and periodically clean the log out.

I try to download firefox. After completion, the firefox icon is crossed out and when I double click, I get a message saying the architecture does not support this application. I have a g4 mac laptop with 10.5.8. Any suggestions?

hard drive died two weeks ago and had it replaced by an authorized dealer.
Previous to this disaster, I had firefox and had no problems.

The latest 9.0.1 version is not compatible with your ppc mac os.
Firefox 4 versions and later '''do not run on a PowerPC Mac''' and require at least OS X 10.5 and '''an Intel Mac'''.
see : [http://www.mozilla.org/en-US/firefox/9.0.1/system-requirements/ Firefox 9 System Requirements]
'''The latest supported version for your os is 3.6.25''' , you can download it from:
http://www.mozilla.org/en-US/firefox/all-older.html
see : [http://www.mozilla.org/en-US/firefox/3.6/system-requirements/ Firefox 3.6 System Requirements]
[For older Macs that aren't supported in Firefox 4+ versions, if you like, try TenFourFox for PowerPC's running Mac 10.4.11 & 10.5.8]
http://www.floodgap.com/software/tenfourfox/
http://tenfourfox.blogspot.com/
https://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

HT4972 I have an iphone 3G and I can't get any applications on it (Viber or Skype etc). It keeps telling me this phone does not support this application. What do I do?

How can I update the iphone to IOS versions that support the apps I want?

Viber and Skype aren't compatible, but you might try a similar app called Text Free (from Pinger):
https://itunes.apple.com/us/app/text-free-real-phone-number/id470580739?mt=8

WI-FI Adapter on CPU(without any wi-fi platform), then not support this function.

Similar Messages

Maybe you are looking for