Wi-fi and bluetooth are not working any more on my iPhone 4s after I updated it to 7.0.4

Dear all,
Since  Friday morning the Wi-Fi and Bluetooth of my iPhone 4S have not been wirking any more. They appear as "unactive". I restored the system, updated it to 7.0.4., but nothing changed. Can anyone please help me?
Thankful in advance,
Kind regards,
Fraya Frehse

Last night I wiped the phone and did a complete restore.  Lo and behold the wifi was working again after the restore finished.  GREAT.  30 minutes later went to look at the phone and no wifi again, great!
So if my wifi chip coincidentally fried itself during the update, I supposed it coincidentally unfried itself during the restore, only to fry itself again later.  Clever chips these.

Similar Messages

  • I have reinstalled CS5.1 extended on my new Lenovo Laptop with Win 8.1 64 bit. No installation problems, but now Image Adjustments and tools do not work any more.

    Operating Problem with CS5.1 extended. I replaced my old HP Laptop with a new Lenovo laptop with Win 8.1 and reinstalled CS5.1 64-bit version. The software downloaded and installed correctly and worked for a day, but when I rebooted the next day, the Image Adjustments and tools functions did not respond any more. I have uninstalled and redownloaded/ reinstalled without success.

    Notebook Info
    1 x Lenovo G710 Notebook, Intel® Core™ i5, 43,9 cm (17,3 "), 1000 GB HD,
    Intel Core i5-4210M 2,60 GHz, (Turbo-Boost 2.0 bis 3,20 GHz)
    43.9 cm (17.3") 900p (HD+) LED-Display (1600 x 900)
    8192 MB DDR3-RAM
    Harddisk: 1000GB SATA
    NVIDIA N15V-GM mit 1GB DDR3
    Prefs
    As per download settings, I changed nothing
    Image Info
    Jpg conv.from RAW Canon, dim. 4746x3567, 6,64 Mb
    The software worked on the first day, problems appeared next day. I uninstalled and deleted the exe.file, then redownloaded and reinstalled but same problem persists.
    I then downloaded and installed on my PC and everything works.
    Regards Roland

  • Orange light of f12 key is stuck and wif-fi and bluetooth are not working

    Since yesterday morning, I am facing this problem with my laptop. I can't use wi-fi and bluetooth on my laptop becasue the F12 key light is orange and it is stuck at orange, it is not turning white. Usually when I start my laptop that light stays orange for 2 seconds and then turn to white and I use my wi-fi. But now it is stuck at orange and wi-fi is not working. I am pressing that key again and again and it displays on screen that Airplane mode is on and off but nothing is happening and the light is stuck at orange. Network adapters are not showing wireless drivers, only ethernet driver can be seen of Realtek and network connections also not showing any wireless devices. I have done the system restore as well but nothing resolved. Kindly provide a solution regarding this. My laptop model is : HP 15-d008tu Notebook PC

    Hi,          Peform the steps listed in the below link http://support.hp.com/us-en/product/HP-15-Notebook-PC-series/6529963/model/6622223/document/c03535285/

  • Wifi and bluetooth are not working properly

    When the lappy is situated near any wifi device then only it catches the signals other wise shows no network found.Same as the bluetooth some times get paired up but mostly not and when connected no data can be transferred between devices. some times get connected but for a while only, after it disconnect several times. Iam too much upset .i have bought it only a moth ago and finds this error. all the drivers are installed and working properly. Is this model have this issue ? or i am the only one suffering from it.

    >Is it possible to switch the power WiFi module as before?
    You have replaced the WLan module and this means that the hardware configuration has been changed. This means that the different module has affected the software functionality.
    The new WLan/BT combo card BCM94313HMGB seems to be designed by Broadcom.
    From my knowledge most Toshiba notebooks supports the Intel / Realtek or Atheros modules. Therefore I think there could be an compatibility issue between the FN button software and this module.
    Maybe you could try to install the Broadcom driver once again to check if it helps, otherwise you have to forego that.

  • My iPhone was damanged by water, and it's not working any more.

    My friend told me the sydney apple store could do out of warranty replacement that I can replace the old one by paying $179. Is that true?

    Probably. Why don't you ask them, for a definitive answer?

  • Rules not working any more in mail.app

    Hello,
    in my MBP yosemite ( Exchange mail ), I configured some rules. They used to work fine . But since this morning, I noticed that my rules are not working any more.
    I checked on console log and noticed the Assertion Failure when applying manually the rules :
    Dec 19 10:35:42 Ph3NyX Mail[1382]: *** Assertion failure in -[MFEWSStore _copyMessagesByID:toStore:settingFlags:newMessages:error:], /SourceCache/Mail/Mail-1993/MailFramework/EWS/MFEWSStore.m:337
    Dec 19 10:35:42 Ph3NyX Mail[1382]: exception raised in routeMessages: Destination store does not have a folder ID
    Can you please help me to fix this ?
    Thanks a lot.
    Best regards,
    Omega BK

    I don't know if its connected but I also just noticed a problem. In my case all the rules I had set have changed so that they apply after 7days (rather than the 30 days I had originally set). I can't get them to change back no matter how may times I try.

  • Bluetooth and calls are not working properly

    Please somebody help me!!!
    I have a Hyundai Elantra 2012 and a Curve 9300, the bluetooth has been working fine for a year, however my phone is having problems to connect to my car, what is funny is that I can watch a video and the sound will come out from my car's speakers, I can be listening to a mp3 by using the car's speaker, but phone calls won't get through, I tried to connect my wife's BB10 to my car and everything is perfect.
    My question is, what went wrong???
    Thank you!!!

    I have a similar problem
    Product - HP Pavillion dv6 7135nr
    OS - Win 8
    Bios - F24
    After updgrading from win 7 to win 8 following are the issues I am facing
    a. Wi-Fi not working
    b. Bluetooth not working
    Earlier I spoke to online chat and on their advise updated the drivers for my laptop
    From the link
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&dlc=en&lc=en&product=5273543&a...;
    Following were installed successfully but still the wifi n bluetooth are not working
    1. Ralink 802.11 Wireless LAN Adapter - but problem is not resolved.
    On troubleshooting the network connection - I'm able to enable / disable the wireless adaptor but not able to connect. as it says its OFF.
    The wireless on/off function key is continuously showing red light and its not switching on
    2. Broadcom Bluetooth Software - was installed when i connected through lan cable. 
    3. Also installed the latest broadcom driver frrom ftp://ftp.hp.com/pub/softpaq/sp61501-62000/sp61836.exe was installed
    4. The HP Wireless Button driver sp59835 available at
    http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&dlc=en&softwareitem=ob-112632-1
     was also installed
    Funnily, at times the wifi starts working and the colour of the F12 key changes to white after the laptop has been on sleep mode. Although this does not happen everytime it wakes up from sleep mode.
    Pl. give some solution

  • Keyboard and trackpad are not working, Keyboard and trackpad are not working

    I'm using MBP 15" late 2008 with Maverick OS. A couple of days ago, the internal keyboard and trackpad are not working at all. I did all the troubleshooting. I even reformat it; installing the snow leopard and re-installing the maverick but no good result. I believe there's no problem with my keyboard because i can still do PRAM on my lappy. Everytime i'm booting up my MBP, it always looking for bluetooth trackpad and keyboard. I have not used those bluetooth peripherals from day 1 i've started using MBP. I just read on the internet about the same problem has happened on MBP 13" retina and APPLE fixed it by updating the software. I wish Apple will also do something for the old MBP to fix the intermal keyboard and trackpad problem.

    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".

  • I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

    I got my Iphone 3gs unlocked, but Navigation and Compass are not working. Please help if anybody had faced this problem and got it resolved.

    Only the carrier that the iPhone was locked to can unlock. There you go, hacking void any support from this forum.

  • Savevid and keepvid are not working with os 10.7.3-Is there a fix?

    savevid and keepvid are not working with os 10.7.3-Is there a fix?
    Is anyone else having this problem?

    A massive thanks from me too after discovering the problem when I started work this morning at 2.30am - not something you need that time of day!  Did exactly as written and bingo,  missing tool icons appeared BUT, and there's always a but...
    I have THE SAME problem in Quark with some of the static areas in the measurement (F9) bar. Can anyone suggest what might fix this? I have restarted just ONCE after turning on Extension Manager at start-up.
    Hardware:
    Apple Macintosh MacPro 2x2GHz Dual-Core Intel Xeon
    RAM: 6Gb (667MHz DDR2 FB-DIMM)
    HDD's (internal): 1x160Gb / 1x500Gb / 2x1500Gb
    Software (OS)
    OS: Mac OS 10.7.3 (updated to this 06.02.2012)
    Problem software: QuarkXPress 8.5
    Thanks in advance for any advice / help...
    Paul

  • HT4587 My airport express and wireless airplay speaker are connected to wife, but airplay and homesharing are not working...what to do?

    My airport express and wireless airplay speaker are connected to WIFI, but airplay and homesharing are not working...what to do?  Everything was working fine until about two weeks ago, all of the sudden airplay has disappeared from the iphone, itunes on the laptop, and the apple remote for iphone.  I have restarted the router many times, re-setup the airplay speaker and the airport express and booth are showing as being properly connected to the router when I log into the router IP address.  I was on the phone with Apple support for 30 minutes they blames verizon, got on the phone with verizon and they stated the settings were all correct and compatible with apple, got back on the phone with apple and they again are blaming verizon and trying to get me to get an airport extreme because that would fix the problem...any suggestions, please!

    There are three Airport resets, soft, hard and factory default.  It would probably be beneficial if you tried each one in sequence.  Actually, you could jump to the factory default reset if you don't mind reconfiguring from scratch.

  • HT6146 my wifi and bluetooth is not working what sholud i do

    when i upadte my iphone 4 in ios 7.1.1 my wifi and bluetooth is not working
    what should i do ?? :(

    What doesn't work?
    What problem are you having?
    Remember for the iPhone to see and connect to Bluetooth devices they must be in, "Discovery Mode".

  • My external speakers are not working, any suggestions?

    My external speakers are not working, any suggestions?

    try different audio or USB cables.
    try the speakers with a different computer.
    go to the speaker manufacturer's website and see if there's some troubleshooting info or a new driver that you need.
    check System Preferences > Sound > Output
    see if the speakers show up in the sound output device list
    make sure the mute box is unchecked.
    Check Applications > Utilities > Audio Midi Setup
    see if your speakers are selected in the column on the left
    make sure the mute box is unchecked

  • My ipad safari and mail are not working. Why are they blank when I clickclick on them?

    My ipad safari and mail are not working.  Why are they blank when I

    For Safari try clearing it's cache : Settings > Safari > Clear Cache (and Clear History).
    You could also try closing the two apps completely : from the home screen (i.e. not with Safari or Mail 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of the Mail and Safari apps to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    On my macbook pro I have a message on my homepage telling me that certain items want to use my keychain. I've pressed cancel the message will not go. The mac is now running very slow and iphoto and safari are not working. Can anyone help?

    What version of Mac OS X?
    What home page?
    What browser?

Maybe you are looking for