Wi-fi and bluetooth options "greyed out"

My iPod got wet, so I dried it in rice for a few days and just completed the restoration process as "adtivation required" was on the screen when it turned on. It's as if I have a brand new iPod. However, when I try to set up wi-fi connection, the wi-fi option as well as the bluetooth options are "greyed out." Any help appreciated!

See:
iOS: Wi-Fi or Bluetooth settings grayed out or dim
If not successful, an appointment at the Genius Bar of an Apple store is usually in order.
Apple Retail Store - Genius Bar

Similar Messages

PH5 extended and 3d options greyed out

Hi everyone. I am working in a studio who have photoshop cs5 extended. I would like to use the 3d for a project but the menus are greyed out? I have checked the preferences and turned on Enabled openGL Drawing. The Advanced settings can only be basic (others greyed). The care used in the machine is NVIDIA GeForce 7300 GT OpenGL Engine and the Mac spec is below..
2 x 2.66 GHz Dual-Core Intel Xeon
8 GB 667 Mhz DDR2 FB-DIMM
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2.66 GHz
rob

Just to make sure: The open image is RGB?

Video rendering and playback option greyed out on Premiere Pro CC 2014

I cannot even click on the Video rendering and playback drop down menu as it is greyed out.
I have a GeForce GTX 660 2GB card which should be supported as it has enough memory. I am on Windows 7.
Would really appreciate if someone has a solution how to enable Mercury Playback Engine in this situation.

Managed to fix the problem by downloading and installing the GeForce CUDA drivers as well as updating graphics card firmware.
The Mercury Playback engine enabled itself in premiere after the updates.

My wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

my wifi option greyed out and when i checked out wifi adress it shows N/A . how would i solve this ?

http://support.apple.com/kb/TS1559

Why is select calendar and address book greyed out? Why can we not select these options?

Why can we not select address books or calendars? Why is this option greyed out in ITunes 12?

You have to make the selection active.
Go to Select>all, then Select>modify>border.
Another way is to use a stroke:
Open your picture file
Go to Select>all
Open a blank layer above this
Go to Edit>stroke(outline) selection. In the dialog, enter the width of the stroke, choose color, place it inside, ok it.
If you don't like the border, delete the layer with the stroke, and adjust to suit, then do it over starting with step #3

Select option greyed out for fields of custom DataSource (rso2, rsa6)

Hi
Why are several fields, in my custom DataSource (created in rso2) not available for select?
I do not think this is a permission issue, since several fields are selectable, but not all fields.
It is not the data type, since I see other custom DataSources that have the same data type, and it is selectable as a select option.
This is not a DataSource that was provided by SAP, it is completely custom, and uses a custom data definition (defined as a structure via se11), and a custom function.
I have read the responses to similar questions, but have not found an answer that explains how to make the field selectable for select.
What determines which fields can be selected for selection, and which fields have this option greyed out (not selectable)?
I have come across multiple answers, for similar questions, that suggest an abap program to directly update table roosfield.
Is this safe?
IF I choose this route will I need to run the update program on production, or will the change it makes to my dataSource transport with my transport?
(I can test this).
What I most need to know is If this suggestion is safe, or if it has side effects?
Thank you

Hi Eileen,
In Least case to enable the selection for the fields with the below program:
Below code is for your reference which will use to unhide objects in RSO2 or RSA6 for Data source( in code for BELNR, KUNNR, VBELN, BUDAT fields are unhiding for 0fi_ar_4 data source selection option) . Still need any clarifications let me know.
SE38: Create a program for ref below code.
REPORT ZNP_SELE_DS.
tables: ROOSFIELD.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BELNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'KUNNR'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'VBELN'.
UPDATE ROOSFIELD SET SELECTION = 'P'
WHERE OLTPSOURCE = '0FI_AR_4' AND OBJVERS = 'A' AND FIELD = 'BUDAT'.
Thanks & Regards,
Srinu.Rapolu

Itunes showing all data as other and sync button greyed out

Itunes showing all data as other and sync button greyed out. I have downloaded and installed Itunes 11 (multiple times) and restored my phone twice already, but I am still not able to sync my Iphone 4 with Itunes.
When I select / de-select Apps on Itunes to remove from the phone the "Apply" button does appear, but after I click it nothing happens. Then the greyed out "sync" button just appears again.
Anyone with some advise please?

Try Restarting or Resetting your touch.
Restart: Hold the Sleep/Wake button until the red slider appears and turn off your iPod. Press the sleep/wake button and hold it until you see the Apple icon.
Reset: Hold the Sleep/Wake button and the Home button at the same time. The red slider will appear first, keep hold everything until you see the Apple icon. Release the buttons.
Check your iPod and see if your music and apps have reappeared. If they do after either option, then resync your iPod.
If neither works, then Restore your touch through iTunes.

When OpenGL stopped working (option greyed out)

I discovered a weird bug in Photoshop 12.1 x64 with nVidia graphic cards and what´s causing it:
Problem (on all off my PCs): OpenGL support in prefs / performance is greyed out, no shadow below open documents visible ( == OpenGL not working). After deleting prefs.psp and restarting (as the www says), OpenGL support was working again, on next restart: no support - option greyed out again.
Solution: if deleting the prefs file or the whole prefs folder don´t work, check if you have a custom workspace with the brush floating panel open.
If so, close it and remvoe it from workspace, restart PS and.... OpenGL support is working again!
I could reproduce this bug on all of my PCs, no matter what type of GFXcard and driver version is installed.
Maybe that bug occurs only with Win7 x64, PS 12.1 x64 and nVidia cards, but removing the brush panel solved it on every machine!!
I´ve opened a support ticket and provided Adobe with screenshots of the working and not-working states... maybe they can fix this with an update!
This are my system specs for the tested machines:
workstation 1:
Intel i7 980X HexaCore (with SMT)
ASUSP6T7 WS Supercomputer
6 x 4GB DDR3 triple channel
nVidia Quadro CX
3x WD SATAII HDDs
dual monitor
Wacom Intuos4 XL
3Dconnexion SpaceExplorer
contour Shuttle Pro2
workstation 2:
Intel i7 975 Extreme Quadcore (with SMT)
ASUS P6T Deluxe V2
6 x 2 GB DDR3 triple channel
nVidia GTX 580
2x WD SATA HDD
both systems running on:
Windows 7 x64
Mastercollection CS5.5
latest updates for OS, CS5.5 and GFX drivers...
Maybe this threat helps .... ;-)

I did heavy testing the last days including systems at my home and at a friends office.
In fact, I can´t tell, what´s causing this, but it seems to depent on a certain type of installation. But first the tested systems:
nVidia GTX480 SLI, Win 7 x64, CS5.5 - working
nVidia GTX580 Win7, CS5 - working
ATI HD4870x2, Win7 x64, CS5 - working
nVidia GTX580, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
nVidia GT240M, Win7 x64, CS5.5 - working
ATI X1900XT - XP SP3 x64, CS5 - working
nVidia QuadroCX, Win 7 x64, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
ATI HD4390, XP x64 SP3, CS5.5 (update from CS4 ->CS5 -> CS5.5) - not working
nVidia GTX480, Win 7 x64, CS5.5 - working
On each system I installed the latest driver & updates, rebooted it and followed the same procedure:
1 - removed (==renamed) prefs folder
2 - start PS
3 - open prefs / performace
4 - config OpenGL for "Advanced"
5 - closing prefs and restarting PS
6 - checking OpenGL when active: pt7
7 - Open menu "Window" and and select "Brush" (or press F5)
8 - docking Brush-panel from original position to the tools-panel on the left
9 - saving workspace as "BrushTest"
10 - restarting PS
11 checking OpenGL
Since you have all older Versions still installed when you update i.e from CS4 to CS5 I tried this with every installed version.
On my two office WS I have CS4, 5 and 5.5.
After trying this with the GTX580 with this results: CS4 working, CS5 working, CS5.5 not working - I today started PS 12.1 for working and saw that tiny shadow below the document - WITH the brush panel open!!
Checked it and now its working proper. I have no clue what has changed over night but it did it...
My primary WS with the Quadro card still refuses to actived OpenGL with the opend brush-panel, no matter what I try.... maybe I gonna deinstall that CS4 to 5.5 mess and get me another license for the full CS5.5 instead of the update from the update...

No Sound; All options greyed out

Output options for sound are greyed in Preferences and the desktop sound icon. In the Audio MIDI Setup window, the default output says Built-in Output and the System Output also says Built-in Output. No other options available for either.
Just below halfway down there is Audio Input, which has a bunch of info on the left, but on the right where it says Audio Output, there is just a greyed out message that says Output is Not Supported.
I also tried the option/apple/p/r, got the three chimes, but sound is still greyed out.
Any gurus out there who can tell me what simple thing I did to cause this, or is it a hardware/sofware bug?
Macbook Pro Core Duo 2 Mac OS X (10.4.8) 2 gig SDRAM 2.33 GHZ Core Duo 2

it doesn't matter if you've used the ports or not.. there is a sensor inside the audio ports that will automatically switch your audio in and/or out into digital mode if it trips and then 'thinks' there's a digital cable connected. basically, if you open your sound control panel and display the output pane and it says 'digital out', and the volume control (and everything else) is greyed out, and it says something about this device not having volume control... then this is exactly the situation where the port sensor has clicked on to digital and is staying there. unfortunately, the sensor seems to be quite fragile and there are plenty of users that are suddenly wondering why they have no sound, and why the sound ouput only says digital and the options are greyed out. it would be at least a comfort to be able to say that this only can happen if you've been plugging things into the port (such as headphones), but I've heard of this happening to people regardless.
anyway, look for the signs I mentioned: the digital output option being the only available choice in the sound control panel, with options greyed out. and also a red light coming out of the port. if this is happening to you, then you need to get the machine fixed cos that sensor is jammed.

Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD

Internet Options greyed out in Internet Explorer 9 because of GPO settings in Windows 2008 AD.
I am trying to find out what GPO setting is causing this so I can change I.E. settings at a desktop running Windows 7.
A GPO has I.E. locked down so settings are greyed out for Intranet settings so I can't change Intranet settings.
How do I enable so I can save changes with a GPO?

Classic GPO using Administrative Templates, is designed to do exactly that (disable the UI).
Previously, you could use IEM in preference mode.
Now, you'll need to use GPP, but there are a couple of limitations.
Check the IE10 IEAK documentation (it's useful for understanding what you can do with GPP)
http://technet.microsoft.com/en-us/library/jj890998.aspx
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Why is my WIFI option greyed out!? 4S

Last week I had my iPhone 4S replaced because my wifi option greyed out and the battery life started to drain really fast. 8 days later it's the exact same problem. What's happening here? I bought the phone 11 months ago!!! Up to date software, reset network settings. I have spoke with several other people with the same problem. I expected more from an expensive apple product...
Please help me Apple! Thanks

Your replacement should have a minimum of a 90 day warranty, if replaced by Apple.
If you've followed all of the steps in the troubleshooting article, and your replacement device is still having wi-fi greyed out, then get the device replaced.

MPB Rendering option greyed out - Win7 k5000

System: Win 7/64; CPU E5-2690 X 2; 64Gb RAM; PP CS6 6.0.5; Quadro K5000 GPU.
Project - Project Settings - General - rendering option greyed out. I've carefully seached the forums, tried various suggestions, but still cannot get to select the drop down box.
Can anyone help?
Thanks
Les

Andrew, thanks very much.
Yes - you were correct; while I checked the cuda support txt file, I 'assumed' that 'quadro 5000' would be correct. I edited the file, saved it back to its location, and now have the drop down option working.
Really appreciate,
Regards
Les

Unstable harddisk won't go in dock - and icon is "greyed out" in Finder

Some time ago, I couldn't find my system disk in the dock in Finder (the thing to the left when you open a Finder window). I thought I'd accidently thrown it out, so I did a Sherlock search for it. I found the disc, but its icon was weirdly "greyed out", as if to tell me the disc was "deactivated" or so - and it wouldn't go into the disk dock.
I tried reformatting the disc completely, which worked for 1 day or so, and then the problem was there again. So I thought the harddisk was effed and bought a new one, formatted it and installed OS+programs yet again. After 2 days, the disk disappeared again and was, again, "greyed out" when I searched for it.
I've had the same setup with regards to software, RAM and HD's for almost a year prior to this happening, so it's most likely not a problem caused by new equipment going crazy.
Anyone see this before?

Dave,
Try doing a SMC reset and if that doesn't help try starting in Safe Mode.
SMC RESET
Shut down the computer.
Unplug the computer's power cord and all peripherals.
Press and hold the power button for 5 seconds.
Release the power button.
Attach the computers power cable.
Press the power button to turn on the computer.
PRAM RESET
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Print option greyed-out

G'day
Here's a weird one. About 90% of the time, after I print a file out, the print option in the file menu greys-out, and stays greyed out until I restart CFB. Even if I CANCEL the print screen, the print option greys out.
Windows Vista Business, 64-bit. Stand-alone CFB install.
Adam

That's the "tree hug" feature
Heh.
In my defence, this is the first time I have tried to print something from any of Eclipse, CFE or CFB, in the 7-8yrs I've been using one or other.
Adam

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out.

I have an external hard drive that shows up in disk utility but Verify and Restore are greyed out. I am trying to determine what is wrong with the drive.
I need the data on the drive and it won't show up in Disk Warrior. I have tried different Mac's and different USB cords only to find the same outcome. When selected in Disk Utility the information read as such...
Disk Description : WD Elements 1023 Media                      Total Capacity : 500.11 GB (500,105,740,288 Bytes)
Connection Bus : USB                                                               Write Status : Read/Write
Connection Type : External                                                     S.M.A.R.T. Status : Not Supported
USB Serial Number : 575837314135304D36373132        Partition Map Scheme : Unformatted
As the drive shows in Disk Utility there must be some life left in it surely. There is a possibilty that the physical connection between the USB cord and the external drive is damaged but since the drive shows up I believe it's unlikely... before I give it to the pro's is there anything else I can do to diagnose the issue?

Hello,
I have just experienced the same thing!
Although my external drive shows in Disk Utility, it does not show in Finder.
And the Verify/Repair buttons are also greyed out.
Also, although the drive is 2TB. DU shows it as having Total Capacity of only 4.14GB! (Which should be the Free Space).
I was wondering if you solved your problem, & if so, would you share your solution.
I´m afraid to Erase in case I lose all my Data on the drive.
Thanks in advance for your reply!

Wi-fi and bluetooth options "greyed out"

Similar Messages

Maybe you are looking for