Wi-Fi Connection Works only first time
I successfully setup my home wi-fi connection without any problems but as soon as I shut down my iPod touch and turn it back on, it will not re-connect. I have to manually set it up each time. My wireless router is set to not broadcast the network name. Does that have something to do with it?
I think that you have probably answered your own question. People who seem to have WiFi issues either do not broadcast their network name and/or do not broadcast their SSID.
I broadcast both, use WPA2 encoding and have not lost a Wifi connection to my home network for several weeks.
Similar Messages
-
KDE3 trash works only first time
I just noticed that KDE3 trash works only once.
When I move files to Trash only first time I can empty it. Second time it does not work.
I tried to delete ~/.local/share/Trash
then logout/login
but problem persists:
Trash works only first time
Any way to fix this?
thanksbump
so there is no way to fix this (unknown problem/resolution)? -
ThinkPad Edge (Type: 0301GXG) WOL works only first time after connect power
I´m trying to Wake On Lan, and after some days thinking that don’t work, it works only 1 time. So start all process over again and don’t work. After repeat all steps, I realized that only works the first time you try to WOL after plug the power. If just shutdown from Windows 7 but not Unplug and re plug the power it will not WOL. If shutdown W7, unplug the power, plug the power and use any WOL, it works perfect every time.
¿Any idea to WOL without unplug and re plug the power?
Thank you in advanceYes, the display is only supposed to power on if a DVI signal is present. This has led to many customers believing their new displays were dead, until they were told to connect the DVI cable first.
-
I have all thenecessary updates. I have switched over from a PC to Mac back in April and have nad nothing but problems adapting. I don't know why this worked the first time, and put my videos inti imovie, and now it doesn't recognize it at all. And the Mem card reader does work, because I just put the SD card from my regular camera into it and it downloaded those fine, it just won't take my movies!
Which sony camera? I have a Sony HDR-CX550 right now and have been able to use the SD card as well as connect the camera directly. I also had CX110 that work too. You may want to try to copy the complete top level folder from the SD card to the Hard drive, then try to "import from Camera archive" and select that folder.
-
I bought a camera connection kit. First time it worked fine, using the USB connector, but now neither the USB nor SD connector works. The iPad shows a connector is attached, but Photos doesn't open. Any ideas? thanks
If you have not done so, try exiting the Photo app (and maybe more apps if you have a lot open) from the Open Apps List and see if a discount/reconnect opens the app. If that does not work, try powering down the iPad and test. If it is still not working try a hard reset by pressing both Home and Sleep/Wake buttons at the same time until the Apple graphic appears, ignoring the Slide to Power Off button.
-
Active sync problems / syncing only first time
Hello!
I have a Xperia Z3 and everything works fine, except the Active Sync with my one.com account.
The syncronization only works the first time directy after setting up the account. I can be shure, there is no problem with password or server adress because it syncs (even if it only works once)...
The next time i try to get new e-Mails the mail app says something like "no connection to the server." (Thats not the original error message, but its translated from the german error message)
My first attempt was to change the sync interval and tried from push to 10 minutes everything. Did not work.
I then deleted the account and established it again. Did not work.
The little syncing symbol next to the selection box always stays grey and does not move.
Does anyone have the same problem and/or can help me?
Thanks in advance!Glad to hear that you got it working with another client
Hard to say what's wrong here as i haven't seen the issue before. But as it says that their ActiveSync support is in beta and i haven't seen the issue before i would suspect there are issues with the server and that it will work also with our client in the future.
In case yu want to give them more feedback about our client you can refer to this document: http://www-support-downloads.sonymobile.com/support/XperiaInBusinessZ3/Xperia_in_Business-Email_and_...
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page. -
Hi,
I have an iPod shuffle 4th generation and an iPod Nano 5th generation . The Nano wheel appears to have stopped working - I can't get it to play or anything. I've done the reset and it worked the first time, but now the only way I can get it to play anything is to shake it and go with the shuffle choices - I can't change volume, song, pause or turn it off.
So, I decided to start using the Shuffle which I was given as a present last year. I've plugged it into my laptop (running windows 8 and newest version of iTunes). It appears in iTunes on the left hand side, but when I click to sync (whether I tick sync all or choose artists) it says synched but has no music. It seems to not be linked to the music library - when I tick synch all songs, next to the "sync music" it says 0 songs?
Any help to fix either would be really appreciated - I'm without any music at the moment and I'm going away this weekend!
ThanksHi Bblairjones,
If you are having issues with your Nano and Shuffle, you may want to try the Troubleshooting Assistants on the following page:
Apple Support: iPod Troubleshooting Assistants
http://www.apple.com/support/ipod/five_rs/
Regards,
- Brenden -
Structure inside while should work only one time ?
Hi Everyone ,
I have coded a program that if i click a button ( switch untill released) . inside that structure should work only one times .
and i have coded and its working fine .. but its looks compilcated..
i need some simple solution . Plz help me guys
Attachments:
CODE.vi 10 KBsaran1988 wrote:
I have coded a program that if i click a button ( switch untill released) . inside that structure should work only one times .
and i have coded and its working fine .. but its looks compilcated..
i need some simple solution . Plz help me guys
Your code has very little to do with what you are describing.
There is no button with "switch until released" mechanical action. (OK is switch when released, stop is latch when released)
A case structure always "works". Are you saying that it should execute e.g. the true case only once whenever the outer case goes from false to true??
Your inner case goes true more than once per run of the program (whenever the OK goes true). If it should really only work once overall, use the "first call?" primitive. You need to formulate the problem using less ambiguous words.
There is no obvious starting state for the boolean that you read via local variables. How do you ensure that it start with a known value? Does it matter?
You seem to entirely deal with integers, so why are you using floating point representation for the numerics?
What is the purpose of the orange numeric indicator. Is it just a kludge for your logic or does its value mean anything?
Why does your loop not contain any wait?
At this point, you should learn about shift registers. It would eliminate all your local variables.
LabVIEW Champion . Do more with less code and in less time . -
how can I delete photos from my ipad that came in when I connected for the first time to my pc? HELP
Photos that were synced from your computer using iTunes can only be deleted by de-selecting them from the folder from where they were synced - and then re-syncing.
Connect the iPad to the PC and launch iTunes.
Click on the iPad name on the left side under devices.
Click on the Photos Tab on the right.
If you want to remove all of the Photos - uncheck the Sync Photos from Heading
Click on Apply in the lower right corner of iTunes
If you are using iTunes 11 - this will be helpful, Setting up syncing in Windows.
http://support.apple.com/kb/PH12313 -
T-mobile Huawei dongle loaded & worked fine first time- now it won't
I have a PAYG dongle and loaded it onto Lion on a new Macbook Air- it loaded up and I cruised the net fine. Now it won't connect at all. It says 'device disconnected' and repeatedly asks to redial, when it isn't disconnected and the blue light is flashing on the dongle. I have removed and reinstalled the software to no avail. (Also the 'uninstall' doesn't work properly- it gets stuck in a loop between 'uninstall T-mobile software' and then 'enter password', then it just goes back?)
This is really annoying. I can't understand why it worked the first time and not now. In my efforts I have copied over all the settings under 'network' from where it does still work on Snow L on a Macbook Pro. Everything is the same but the disconnected message flashes up every time on Lion.
Any ideas?I'm not sure, but this may help you out: http://benvallack.com/notebook/using-a-huawei-e170-tmobile-web-n-walk-usb-stick- with-mac-os-x-leopard/
-
its almost 10 months,i purchased ipad2 32 3G wifi.itinially i got problem with applications and safari shut off frequently now since last 4 months my ipad starts with a message (connect iTunes)like first time start and going to restore mode and it occurs frequently.plz advise.
If you have followed the standard Apple troubleshooting processes (see user guide )
probably a trip to the local Apple Store Genius bar is called for before warranty runs out
Assuming the iPad has been released in your Country if not you may have to take it to a
neighbouring Country where it is available
This page will tell you ,via the drop down menu Countries that can support iPad
http://support.apple.com/kb/index?page=servicefaq&geo=United_Kingdom&product=ipa d -
My home button doesn't work the first time I press it, but the second time. This is very annoying. Why is it doing this?
- Try a reset. It cures many ills and nothing is lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
-If a hardware problem see:
fix for Home button -
I've installed itunes twice. It worked the first time but after I restarted my computer it kept giving me this message: Itunes was not correctly installed. Please reinstall itunes. Error 7 (Windows error 127). What's wrong?
See the second box in Troubleshooting issues with iTunes for Windows updates.
tt2 -
I made in app purchase, didn't work the first time, made the purchase a second time
I made in app purchase, didn't work the first time, made the purchase a second time
Whatever your question might be, no one here can help with in-app purchases. You need to get in touch with iTunes support. http://support.apple.com/kb/ht1933
-
Oracle XE 10g connect for the first time
I have just installed Oracle10 g express edition on Windows XP service pack 3, when trying to connect for the first time
I get the ORA-12631 message error when trying to connect!!
SQL> connect system
Immettere la password:
ERROR:
ORA-12631: Recupero nome utente non riuscito
Can anyone help me?sorry here is:
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\>set
ALLUSERSPROFILE=C:\Documents and Settings\All Users
ambiente=AC
APPDATA=C:\Documents and Settings\UR00780.HD01\Application Data
CLIENTNAME=Console
CommonProgramFiles=C:\Program Files\Common Files
COMPUTERNAME=ACMI1252
ComSpec=C:\WINDOWS\system32\cmd.exe
cstella=VERONA
FP_NO_HOST_CHECK=NO
fserver=ACSWDWV01
HOMEDRIVE=H:
HOMEPATH=\
HOMESHARE=\\acnas200.intranet.unicredit.it\UR00780
KITID=AC
LOGONSERVER=\\USADSW340
LSERVER=ACSWDWV01.hd01.unicreditgroup.eu
NUMBER_OF_PROCESSORS=2
OS=Windows_NT
Path=C:\oraclexe\app\oracle\product\10.2.0\server\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\Program
Files\Microsoft SQL Server\80\Tools\BINN;C:\Program Files\IBM\Personal Communications\;C:\Program Files\IBM\Trace Facil
ity\;C:\Program Files\Symantec\pcAnywhere\;C:\PROGRA~1\IBM\CLIENT~1;C:\PROGRA~1\IBM\CLIENT~1\Shared;C:\Program Files\Int
el\DMIX;c:\Program Files\Microsoft SQL Server\90\Tools\binn\
PATHEXT=.COM;.EXE;.BAT;.CMD;.VBS;.VBE;.JS;.JSE;.WSF;.WSH
PCOMM_Root=C:\Program Files\IBM\Personal Communications\
PROCESSOR_ARCHITECTURE=x86
PROCESSOR_IDENTIFIER=x86 Family 6 Model 37 Stepping 2, GenuineIntel
PROCESSOR_LEVEL=6
PROCESSOR_REVISION=2502
ProgramFiles=C:\Program Files
PROMPT=$P$G
SESSIONNAME=Console
SystemDrive=C:
SystemRoot=C:\WINDOWS
TEMP=C:\DOCUME~1\UR0078~1.HD0\LOCALS~1\Temp
TMP=C:\DOCUME~1\UR0078~1.HD0\LOCALS~1\Temp
USERDNSDOMAIN=HD01.UNICREDITGROUP.EU
USERDOMAIN=HD01
USERNAME=UR00780
USERPROFILE=C:\Documents and Settings\UR00780.HD01
windir=C:\WINDOWS
C:\>
Maybe you are looking for
-
Here's the code that no longer works. The buttons scale down in all other browsers but stopped working after the latest firefox update. .bigButton:hover{ -moz-transform: scale(.95) rotate(0deg) translate(0px, 0px) skew(0deg, 0deg); -webkit-transform:
-
when i click the firefox icon to open firefox it pops up a box that says that firefox is running but not responding. i open taskmager to close the firefox process but there is no firefox process listed. i restart my computer and get the same result.
-
Possible Bug When Binding Data to ContentPresenter ToolTip Attribute
Hello everyone, I'm developing a small application using WPF. I have a custom ListBox control which contains a number of CheckBox entries paired up with a ContentPresenter object which displays some text obtained from a custom generic object. If I bi
-
What is the file name of the Profile file containing past e-mails etc
I backup to an external drive in uncompressed plain language format. My e-mails beyond 2014 have been lost from my C Drive but still exist on my external hard drive. But I can't find them as I don't know the Profile file name
-
JSF commandButton with Parameters
Hello, How can I pass parameters to backing bean through commandButton?