Wi-Fi Connections issues: HELP NEEDED!

I've been running my iPhone mostly on the EDGE network the past few weeks. Some hair might have gone grey while I was waiting for it to laod, but it loaded after sometime.
Anyways, I have a linksys wireless router and everytime I try and use my Wi-Fi with the iPhone it says "Safari can't open the page because it could not connect to the server."
Does anyone have a solution for me to change settings through network settings, or anything eles that might be quick and easy?

Here is a quick check list you can take a look at and try. As well as a couple questions. It sounds like possible interference of some kind.
1. Has Firmware on the router been updated?
2. Have you updated iPhone Software to 1.0.1?
3. Have you done a restore on the iPhone and tested the network again?
4. You may wish to inquire to your router provider about changing the channel on your router, To see if it is stopping the iPhone from grabbing a stable connection.
Test your iPhone on another Wireless Network, If other Wireless Networks work, Then it could just be a compatibility issue with your router, But please inquire to your Router Provider about how your wireless device will not hold the information of the Router IP and other information, They may be able to change a setting in the router to help stabilize the connection.
Apple has also released a new router, The Airport Extreme 802.11n
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/wa/RSLID?mco=E84 08794&nplm=MB053LL/A

Similar Messages

  • Computer restarts when ipod is connected urgent help needed

    alright this is weird, I've had my ipod for ages and suddenly I go to plug it in and the computer slows down really really really slow and eventually just turns it self off, restarts and then sits in a black screen. if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen, but both my ipod and computer work fine when there not connected. i have the latest version of itunes which seemed to help the first time i tried it actually started to update the ipod but then guess what the computer has another heart attack. urgent help needed please!!!

    if I leave the ipod plugged into the computer and restart it again it just goes straight back to the black screen
    Given this, I'd put it down to a flaky power supply in the computer. Might want to try using another computer or replacing the PSU.

  • HT4623 recent ios6 ipad wireless connection issues-help

    ?

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • JCA Binding Component connection issue - Help plz

    All,
    soa - 11.1.1.3
    I configured a async BPEL which reads data from DB (using DBAdapter) and write to a file. I'm getting the following error frequently. But same BPEL if I test it after few minutes it works, its very intermittent. Any clue?
    I checked the DB which is installed locally, its up and running. No issue i seen in the DB.
    Caused by: BINDING.JCA-12511
    JCA Binding Component connection issue.
    JCA Binding Component is unable to create an outbound JCA (CCI) connection.
    *OutOrderRequestMap:TerritoryPull [ TerritoryPull_ptt::TerritoryPull(TerritoryPullInput_msg,TerritoryPullOutputCollection) ] : The JCA Binding Component was unable to establish an outbound JCA CCI connection due to the following issue: javax.resource.spi.IllegalStateException: [Connector:199176]Unable to execute allocateConnection(...) on ConnectionManager. A stale Connection Factory or Connection Handle may be used. The connection pool associated with it has already been destroyed. Try to re-lookup Connection Factory eis/DB/orafin11i from JNDI and get a new Connection Handle.*
    Thanks,
    sen

    Are you using JDBC Xa datasource ? Try following the steps defined in this forum link @ Re: Error at the time of Invocation of DB Adapter

  • Connection issue help

    I have intermittent connection issues.  I have been calling and calling.....  We did finally get someone who spoke English.  A "technician" came to the house and found nothing wrong with the connections, other than to tell me that in our apartment we have copper wiring and that there is nothing that they can do.  Although, my neighbor, who has Charter, has never had an issue.
    I overlooked the fact that the "technician" that I'm paying the service for, only glanced at my computer and told me that there was nothing wrong.  Now I still left with a connection that constantly drops, is still an issue.
    I called again, only to reach someone I can barely understand, who tells me to disconnect the connection that goes from the modem to the computer and switch them.  Uhm, okay.  Just for fun, i switched the cords (spun em around) .   I asked what purpose this would serve as I'm using the same cable?  Obviously, this did not change anything.
    I have called several times and am left on hold.
    I called once again to inquire why my Verizon in Home Agent would not connect to the internet. Although, I did have internet service.  The agent  said that the In Home Agent would come on only if I had a connection issue...This makes absolutely no sense.
    Lastly, after being so frustrated, I managed to spill a drink (fortunately, I had not yet reached for the bottle of liquor).  This brings us to a new dilemma, the computer now does not turn on. (using the laptop)... I have the insurance for a replacement/repair of my computer.  I again called Verizon, no one has heard of this service, but yet I pay a monthly fee.  "It's not something they handle" but they are willing to TRANSFER me AGAIN.
    {edited for privacy}

    This is DSL-101 - but make sure your phone cord is no longer than 12 feet long ... and not one of those cheap "ribbon" phones cords. It's not the ability of the signal to reach the modem - rather the ability of your modem to transmit through the length of the phone cord. (You would be amazed how many people how 50' phones cords going to their modems). The shorter the phone cord, the better. 

  • Connecting external audio interfaces?! Issues, help needed!

    Ok well basically i'v always used a pc to do music using cubase and a variety of hardware including a steinberg mi4 external audio interface connected via usb. Now on my pc which is actually less powerful than my new macbook (the 2.2ghz model) the interface works with out fault no latency, no distortion.
    However once used on my new shiny macbook, for which i'v purchased logic pro as opposed to cubase (felt like a change) when trying to use my interface via usb on the mac through logic i seem to have issues with recording and all sound comes through distorted with a great deal of latency. I'v tried altering the sample depth and the bit rate and nothing seems to work?
    I have downloaded mac specific drivers for the hardware so i'm sure its not a driver issue?
    Anyone with any suggestion, cos i'm a bit gutted really?
    P.s. Does anyone know if you can change the graphics card in a macbook?
    Ben

    Hi, im having the same issue, using garageband and logic pro. I used pc to make music with no problems at all with my Zoom g9.2tt guitar fx usb interface.
    Now with mac i get distorted and lots of latency.
    One way i found that can make this work with garageband is use the internal sound card to play sounds and the usb interface to record this helps a lot. This trick makes it for garageband but not for logic pro(still getting distortion/latency).
    By the way i used to have an emachines laptop with 512 ram memory and a 1,6ghz semprom processor, believe or not, easier to record on that one, with no latency and no distortion.

  • RADIUS \ NPS - Connection Issues - Help greatly appreciated.

    Hello,
    I have been banging my head on this issue, and would greatly appreciate some assistance getting this worked out. My goal here is to authenticate both domain & non-domain devices (laptops, smart phones, tablets, etc) to my network. I'll followed
    several tutorials without much luck - and I feel my lack of knowledge on this particular topic weighing on me. 
    I am currently working in a lab environment, which consists of a Server 2012 VM with Active Directory installed and configure. I've also setup and configured my Wireless Access Point, which i've confirmed works just fine using WPA-Personal. I've
    installed NPS, as well as AD CS using all of the defaults.
    I'd like to know the opinions of anyone here as to the best way to set up this environment for my needs. As mentioned above, I want to be authenticating both Domain and non-domain devices. Should I have to be setting up certificates of some sort
    for this goal? Or can I stick with just plain AD user/pw access? 
    I've configured my WAP for WPA-Enterprise, specified the RADIUS server IP, and entered the shared secret. I've configured NPS w/ my RADIUS client (that being my WAP). My Wireless Policy consists of the following:
    Overview:
    Policy Enabled
    Grant Access
    Ignore User account dial-in properties checked.
    Type of network access server: Unspecified.
    Conditions:
    NAS Port Type - Wireless - Other OR wireless - IEEE 802.11
    Windows Group - DomainName\Wireless Users (I created the Wireless Users security group and added one newly created user to the group)
    Constraints:
    EAP Types: Microsoft: Secured Password (EAP-MSCHAP v2)
    Less Secure Auth. methods selected: MS-CHAP-V2, MS-CHAP
    Everything else in the network policy is set as its default, and i've registered the NPS server in AD. 
    My attempts to connect fail, and the only relevant Event Log that is being processed is in the Network Policy and Server Log is what i've copied below. Please ask for any information that may help me work this out, i'm all ears! 
    Thank you.
    Network Policy Server denied access to a user.
    Contact the Network Policy Server administrator for more information.
    User:
    Security ID: Domain\Daniel
    Account Name: Domain\Daniel
    Account Domain:
    Domain
    Fully Qualified Account Name:
    Domain\Daniel
    Client Machine:
    Security ID: NULL SID
    Account Name: -
    Fully Qualified Account Name:
    OS-Version: -
    Called Station Identifier:
    2A-A4-3C-99-FE-CA:DomainWIFI
    Calling Station Identifier:
    00-24-D6-A4-C8-8A
    NAS:
    NAS IPv4 Address:
    192.168.1.100
    NAS IPv6 Address:
    NAS Identifier:
    24a43c98feca
    NAS Port-Type:
    Wireless - IEEE 802.11
    NAS Port: 0
    RADIUS Client:
    Client Friendly Name:
    UniFi
    Client IP Address:
    192.168.1.100
    Authentication Details:
    Connection Request Policy Name:
    Wireless Policy
    Network Policy Name:
    Wireless Policy
    Authentication Provider:
    Windows
    Authentication Server:
    WIN-PBL42GEIH4E.Domain.local
    Authentication Type:
    EAP
    EAP Type: -
    Account Session Identifier:
    Logging Results:
    Accounting information was written to the local log file.
    Reason Code: 22
    Reason: The client could not be authenticated  because the Extensible Authentication Protocol (EAP) Type cannot be processed by the server.

    Hi,
    You receive this message when there is an incompatibility in authentication between the client and server.
    Check the authentication protocol on the client and verify if its the same as the authentication protocol configured in your network policy.
    Besides, secure password EAP-MS-CHAP v2 is an EAP type that can be used with PEAP, for password-based network authentication. EAP-MsCHAPv2 can also be used as a standalone method for VPN, but only as a PEAP inner method for wireless.
    For detailed information about EAP-MSCHAPv2, please view the link below,
    http://technet.microsoft.com/en-us/library/hh945104.aspx#BKMK_LAN_SecPWD
    Therefore, we recommend that you need to change your authentication method on both of server and client.
    Moreover, if you change the authentication method to PEAP, you need to implement ADCS in your environment.
    Hope this helps.
    Steven Lee
    TechNet Community Support

  • Airport Extreme / Apple TV Connectivity issue -HELP!!

    I am able to enter my WEP password on the Apple TV, and it connects to my wireless network. But, the next day, it doesn't show up in my list of devices on iTunes. I look at the setings on the apple TV, and it says I am not connected to network, and I have to enter password again. What setting do I need to adjust on the Airport Extreme or the Apple TV?

    I have the same issue. Wish I could help.... It is ridiculously annoying to have to put in the password every day, yet it is all I can do!
    I dont understand... even if it drops the connection to the TC, why cant it reconnect on its own like computers do?

  • Speed connections Issues Help?

    Hi,
    New to the forum and looking to receive any help with my problem.
    Background Info:
    I was on sky broadband and receiving a steady 4mbs D/L (Up to MB +Unlimited Broadband) at £12 per month.
    A BT Representative cold called me and persuaded me to switch the broadband to BT (Already have the Phone with BT).
    I was informed that i would get at least MB d/l and up to MB - so signed for the option 1.
    Then I realized that my household is a heavy user,so changed the package to option 3 (Unlimited Broadband Usage)
    costing me an instant £21.80 bill for adjustments.Fair enough.
    The Problem:
    After the 10 day period I am only getting 2.MB D/l at best.
    I have been on the phone with BTU+their team of specialists and have still not resolved the issues as of yet.
    I have to call back on Saturday after leaving the router on for a further 48 hours without powering down.
    So Basically:
    Paying twice as much for only half of what i was getting with sky?
    If I could cancel the lot and switch back to sky .I would!
    Rant Over (for now)
    Thanks
    Paul
    Solved!
    Go to Solution.

    welcome to the forum
    in order for the forum members to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com or http://bt.custhelp.com/app/answers/detail/a_id/9354/c/346,4740,5520 and post the results .
    are you connected directly to the NTE5 master or test socket or to somewhere else? Do you have any phone extension sockets in your home?
    Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
    Someone may then be able to offer help/assistance/suggestions to your problem
    If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
    If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

  • DVR/STB/Remote issues - Help Needed

    New to Verizon FIOS (Installed about 2 weeks ago).  Have a few issues. Any help is appreciated
    1) When im on the Home Media DVR and i fast forward through a program, when i stop or hit play, an extremely loud beep that lasts for 1-3 seconds comes from the speakers.  How do i get this to stop, what is causing it, etc?
    2) When i fast forward from one of the STB (regular HD box), if i hit FF once, it fast forwards pretty slow, if i hit it again, it goes somewhat faster.  The problem is.  When i hit it that 2nd time, it seems that 70-80% of the time, it jumps me back to an early portion of the program.  I.E.  Was watching the 2 hour episode of "24", was one hour and 20 min in, got to commercials, i hit FF twice and it jumped me back to 23 minutes in.  Tried again at next commercial break and it jumped me back to 11 minutes in.  What is the deal here?  How do i fix it?
    3) Are there only 2 fast forward speeds on STB?  I came from Brighthouse that had 4 speeds, im a little disappointed with only 2 speeds.  Can anyone verify?
    4) The remotes seem to take 2 seconds or so to register when performing any function other than changing channels.  When i hit FF or REW, DVR or Last, it seems to take a few seconds to kick in.  Is this a known issue, or possibly my box or remotes?
    Thanks for any and all help

    Sorry the ff speeds are the same. On the main MR-DVR there are 3 ff speeds, where the remote STB has 2 ff speeds. I think they did that because how the remote system works, it has slower responses being remote. But with the update you will not need to worry about the ff, because you will not get the hub error. I was one of the first people to get the update and I have not seen the hub error yet.
    As far as a time frame I don't believe there is any thing public about it, I think the only thing they have said is it is going to be rolled out per market, and one market a week. But nothing on the order of the markets.  

  • Officejet Pro 8600 Plus connection issue - HELP!

    I have a strange issue:  after some hours, the communication link is dropped between the computer and printer.  When this happens, IE becomes unusable and will not connect to anything.  This is replicated on three XP home machines.   The fourth, a vista ultimate machine, does not seem to be affected (yet).  I get the "scan to computer is disabled" error.  It cannot be re-enabled.  At this point I cannot print either.  I can reach the embedded web server on the printer via firefox and can still surf using firefox.  I can ping the printer, but again once the connection is dropped, no printing or scanning to the computer.  The only thing I've found that resolves the issue (temporarily) is to reboot the computer, which just starts the cycle again.
    last night I installed the software on an XP machine and the laptop to test when the connection dropped.  They lasted from 7pm Monday until I got home at 5pm Tues.  The machines were not used.  Once I started using them (firefox only), then they dropped the connection within a half hour of each other around 7pm.  The other XP machine lasted from 7pm Mon until 7am tues, when my wife started using it and then noticed it dropped sometime that tues between 7 and 9AM.  An 11am tues reboot ran OK until 10 pm tues when connection was lost again (and IE is now dead).   The Vista machine has been running since 7pm monday until now (930pm tues) and still seems to be holding.
    printer hardwired, to router, static IP, 100-full link speed (also tried 10-half)
    router dlink di-655
    two XP machines are hardwired, vista is hardwired, and last xp machine is a laptop on wireless.
    I've swapped cables rebooted and reinstalled multiple times.  I must have a file a mile long on the support phone line.  They were unable to fix it.  I asked this to be escalated, but who knows when I'll get a response.
    I've toggled firewalls - XP built in
    I've uninstalled anti virus software
    I've even put up with crazy suggestions from tech support like changing the router channel (uhh, it is wired!)
    one xp machine had an AIO 4215 hooked via USB and the others printed to it via network, but the printer has been deleted from the networked machines.
    I can ping 127.0.0.1 which is supposed to indicate the tcp service is OK.
    I have not reset winsock .. I can see one machine being bad, but three????
    malware / virus scan shows no issues.  Again one maybe, but three??
    The only thing I can think of is that there is something in the XP networking stack that conflicts with the new 8600 software as hours pass.  Perhaps there is some polling operation that goes on then dies after some time, then it kills IE as it dies.
    When the printer works it is great, but rebooting is not a permanent solution to this.
    any suggestions would be greatly appreciated!!!!!!  I am stumped and so is tech support.  They are sending it to engineering, but who knows when they will respond.
    thanks in advance.
    This question was solved.
    View Solution.

    well it looks like I have a working solution  ... I downloaded a freeware file called process.exe .  I made a cmd file via notepad with the following contents:
    rem this is to keep the HP network printer communicating with the desktops
    rem
    process -k "hpnetworkcommunicator.exe"
    rem
    process -k "scantopcactivationapp.exe"
    rem
    "C:\Program Files\HP\HP Officejet Pro 8600\Bin\HPNetworkcommunicator.exe"
    rem
    Start "" "C:\Program Files\HP\HP Officejet Pro 8600\Bin\ScanToPCActivationApp.exe" -deviceID CNXXXX:NW -scfn "HP Officejet Pro 8600 (Network)"
    the XXXX is your printer serial number with an extra character or two.  Pull that number from the port tab after you pull up "properties" for the 8600 printer.
    This cmd file basically restarts the printer link.  It opens a command window that launches the program to re-establish the link.. then it closes the command window.   The launched program shows that the communication link is dead (just for a few seconds), but then it makes the connection... THEN you hit the close button and coninue your work until it dies again. 
    I may have it autorun every X hours if I can narrow down a good time.  Until then I have a shortcut on the desktop to "FIX HP LINK"   ...   I only had to do this for my XP machines, as the vista one seemed OK.
    What ticks me off is that I shouldn't have to do all of this diagnosis. It would be nice if there is a fix in the pipeline so the link stays stable al the time.  I've spent hours trying to figure this crap out.
    Anyhow, I hope the time I spent helps someone.  PS, thanks to the OJ6500 thread that had the info for the scantopcactivationapp.exe program.
    PS  ...  I'm still waiting for an engineer to contact me, if any HP employees are reading this.
    PSS  I haven't tried this without killing and restarting the hpnetworkcommunicator stuff, but it works for now.

  • Ipod Touch: My Issues, help needed as fast as possible

    Well recently i got an Ipod Touch 2nd Generation for christmas, and i must say i love it. But i have got some serious problems. 1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again :S. Yes that is as bizarre as it sounds. Sometimes it will work fine and i can use any of my apps whenever i like. But frequently(more frequently as time goes on) the applications dont open, i touch them they open the background for the app and they take me back to the main screen. I have tried the following: reseting the iPod, restoring it to factory settings, uninstalling apps and then re-installing and this issue is resolute. I also happen to know that some other 2nd Generation Touch owners at my school have the very same issue. I have seen some threads dotted about explaining their issues that are similar to this, meaning its fairly widespread.
    My second issue is really bugging me, i opened the itunes store for the first time on my iPod(i never get any of my music from itunes normally i detest the application.) and all of a sudden it downloaded a podcast without me telling it to. It was called Podhead: The DoorWhores Off to vegas. This is something i really do not wish to have on my iPod. So i synced it to my windows OS and tried to re-sync the iPod's podcasts with my library so that it would dissappear. But it didn't, i then tried setting it to manually putting files on my ipod and alas it doesnt show up in the podcasts sub section of the device. I tried playing the podcast and it takes me to the home screen of my ipod with the Play triangle flickering constantly in the top right of my ipod. I don't know what is going on with that but i havnt restored it to factory settings after this issue, mainly because my iPod refuses to accept that i own all of the apps i have backed up and i have no desire to manually re-download them to my ipod.
    3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
    Any help with these issues would be much appreciated. I am in desperate need of assistance before i come to the end of my tether and resign myself to a long trip to the nearest apple store. thanks in advance

    Sanga wrote:
    1) all applications that were not standard on the itouch crash unexpectedly and the only way to rectify this issue is to download something from the app store and they work again
    Did you try to restore your iPod to factory settings and add your apps one by one to find out which app causes the crash? Try not to restore from a backup it may contain the corrupt parts you don't want to install again.
    3) That last scentence brings me nicely onto my final problem which is this: my computer tells me that i do not have the authority to put onto my ipod. Despite all of them being free and despite all of them having being backed up from my ipod.
    Deauthorize and authorize your computer in iTunes, here's how to:
    http://support.apple.com/kb/HT1420

  • SQL Query Sorting Order issue - Help needed

    Hi All,
    I am using the following query in my project to display the records in the grid.
    /* Formatted on 04-09-2013 PM 8:01:51 (QP5 v5.149.1003.31008) */
      SELECT eol,
             status_msg,
             relation,
             building_name,
             device_id id,
             CEIL (SYSDATE - updated_date) duration,
             lab_id,
             aisle_id,
             aisle_location_id,
             ip_address,
             port,
             slot_num,
             hostname,
             pid,
             description,
             sl_num,
             eitms_code,
             status,
             dnd_flag,
             aisle,
             aisle_location,
             spname,
             os_version,
             user_id,
             TO_CHAR (updated_date, 'YYYY-MM-DD HH24:MI:SS') updated_date,
             isterm_svr,
             net_type,
             DEVICE_GROUP_REF,
             cmd_id_ref,
             LISTAGG (TESTBED_ID, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
                AS testbeds_id_ref,
             LISTAGG (NAME, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
                AS testbeds_names,
             spname || '-' || ip_address || '-' || port AS child_asset_group
        FROM DEVICE_TESTBED_VW
       WHERE lab_id IN
                ('7099849',
                 '10769617',
                 '4258712',
                 '10513562',
                 '10515074',
                 '5882676',
                 '8330925')
    GROUP BY eol,
             status_msg,
             relation,
             device_id,
             lab_id,
             aisle_id,
             aisle_location_id,
             ip_address,
             port,
             slot_num,
             hostname,
             pid,
             description,
             sl_num,
             eitms_code,
             status,
             dnd_flag,
             aisle,
             aisle_location,
             spname,
             os_version,
             user_id,
             updated_date,
             isterm_svr,
             net_type,
             DEVICE_GROUP_REF,
             cmd_id_ref,
             building_name
    ORDER BY building_name ASC,
             LOWER (child_asset_group) ASC,
             LOWER (relation) DESC
    The problem is , if any one sorting with any column  , the order is not correct
    In this below code , i have done sorting by port . But the result data order is not correct .
    /* Formatted on 04-09-2013 PM 8:07:02 (QP5 v5.149.1003.31008) */
      SELECT eol,
             status_msg,
             relation,
             building_name,
             device_id id,
             CEIL (SYSDATE - updated_date) duration,
             lab_id,
             aisle_id,
             aisle_location_id,
             ip_address,
             port,
             slot_num,
             hostname,
             pid,
             description,
             sl_num,
             eitms_code,
             status,
             dnd_flag,
             aisle,
             aisle_location,
             spname,
             os_version,
             user_id,
             TO_CHAR (updated_date, 'YYYY-MM-DD HH24:MI:SS') updated_date,
             isterm_svr,
             net_type,
             DEVICE_GROUP_REF,
             cmd_id_ref,
             LISTAGG (TESTBED_ID, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
                AS testbeds_id_ref,
             LISTAGG (NAME, ',') WITHIN GROUP (ORDER BY TESTBED_ID)
                AS testbeds_names,
             spname || '-' || ip_address || '-' || port AS child_asset_group
        FROM DEVICE_TESTBED_VW
       WHERE lab_id IN
                ('7099849',
                 '10769617',
                 '4258712',
                 '10513562',
                 '10515074',
                 '5882676',
                 '8330925')
    GROUP BY eol,
             status_msg,
             relation,
             device_id,
             lab_id,
             aisle_id,
             aisle_location_id,
             ip_address,
             port,
             slot_num,
             hostname,
             pid,
             description,
             sl_num,
             eitms_code,
             status,
             dnd_flag,
             aisle,
             aisle_location,
             spname,
             os_version,
             user_id,
             updated_date,
             isterm_svr,
             net_type,
             DEVICE_GROUP_REF,
             cmd_id_ref,
             building_name
    ORDER BY PORT ASC
    Can some one help me to fix this issue?

    Hi,
    Sorry, it's not clear what you want.
    Whenever you have a problem, please post a little sample data (CREATE TABLE and INSERT statements, relevant columns only) from all tables involved, so that the people who want to help you can re-create the problem and test their ideas.
    Also post the results you want from that data, and an explanation of how you get those results from that data, with specific examples.
    Simplify the problem as much as possible. For example, if you really need to GROUP BY 28 columns, post a problem where you need to GROUP BY only 2 or 3 columns.  (Just explain that you really have 28, so people will give solutions that are sure to work for all 28).)
    Always say which version of Oracle you're using (for example, 11.2.0.2.0).
    See the forum FAQ: https://forums.oracle.com/message/9362002

  • WRT54G Version 3.1 Connection Issues - Help Please

    Good Morning,
    We have a WRT54G Version 3.1. Our existing network is wired and functions fine, I am adding the WRT54G for a few wireless clients.
    During testing I have connected the wireless to my computer via CAT5 cable to port 1. I have connected another CAT5 cable to the internet port of the router from a known good wall jack.
    When I first open the default address 192.168.1.1 and enter the password, all seems well. Due to having servers that hand out IP addresses, I disable the routers DHCP capability.
    I enter the following information for example:
    Local IP: 81.0.0.90
    Gateway: 81.0.0.1
    Subnet: 255.255.255.0
    DHCP disabled
    etc.
    After changing the the local IP and receiving a confirmation that my changes were saved and I will be going back to the previous page, the page won't display with the address changed to 81.0.0.90 and it is blank.
    I release my IP address through cmd, clear my dns cache and reboot the computer. After restart, I am presented with the stock MS address of 169.254.X.X.
    I cannot connect to the local IP I established at 81.0.0.90 and nothing appears to work. The only thing I can do is reset the router and start from scratch...again.
    Any ideas on what keeps happening and how it can be resolved once and for all?
    Thanks in advance
    Message Edited by T1Tech on 10-23-200603:49 PM

    even if you have two DHCP enabled on both routers in your network, you will not get an IP adress conflict (exception of course if you're cascading two wireless routers).
    a LAN port (ethernet router) to WAN port (wireless router) connection can be established allowing you to have both DHCP server enabled on your routers.
    by doing the LAN to WAN connection, you will have two networks in a network.. both network won't meet cuz they will have different IP adress... router 1: could be 81.0.0.90, then router 2 could be 81.0.0.91.
    if you want your two routers to meet and be in the network together, you just need to follow QUAK's suggestion to assign a static IP adress on your PC. or better yet, you can just connect the router you're disabling the DHCP server with to it's LAN port from a LAN port as well of your DHCP server (router 1). this is a LAN to LAN connection... by doing that, you will be able to open up the interface of your router 2(DHCP disabled) since your PC connected to it will get an IP adress...
    "a helping hand in a community makes the world a universe"

  • IS07 Car Music Bluetooth Streaming Issue - Help Needed

    I drive an Audi A1 which I have owned from new 11 months ago. I updated my iPhone 5 to the IS 7.0.4 around 1 month ago and since doing that I now have streaming issues in my car. The connection is via bluetooth, and the music is streamed from my iPhone, however since the update the music cuts out, skips and pauses............
    I took the car to a service centre today where it was confirmed a known issue within the Audi network.
    So how do we go around this? What do I need in order to stream music without the interference? I am pretty sure Apple wouldn't want to pay my car invoice for the added extras that I purchased in order for me to enjoy my music so surely there must be a way around this?
    Any advice is greatly appreciated.
    Thanks,

    This is not about law, it's about software/hardware. But since you're bringing it up, when Siri was introduced for the iPhone 4s, there was a man in a car using siri with his apple earplugs. I searched for law about this in my country (Netherlands) and it's not forbidden.
    Now back to my issue: I want to use a headphone to listen to music and I want to make a call through bluetooth. Iphone doesn't remember I was listening to the music through the headphone. Issue, right?

Maybe you are looking for