Wi-Fi coverage for a specific room (Concrete Pillars)

Hello,
I have the following room to cover with wifi coverage. There are 10 concrete pillars in the room. Can you please advice which Cisco APs and antennas will provide an optimal solution for covering this room.
Thanks!

Hello,
I have no idea from what country you are from, however, in Australia our "installation" cost is very expensive.
In both wireless jobs I've been, the consensus has been to have-more-than-less. This is just one reason. You can, for budget reason, verify my recommended numbers by getting a wireless site survey done. Or you put the desired number of AP you think this area needs and verify. If it's not enough, then you can add some more. Where I work, I'd like to get things done once. I hate going back and re-visiting every site and re-adjusting each AP location because of lack of signal.
Another reason is redundancy: If one of your AP has failed, then the wireless LAN controller (WLC) could potentially increase the transmission power of the nearby AP to make up for the loss. This feature is called coverage hole detection and is enabled, by default, in the WLC.
This is just my opinion, but one thing I am wary about showrooms, is the amount of potential clients. Recent studies have shown that each wireless visitor can potentially carry 2.5 to 3.5 wireless devices at any given time. Ouch! That's alot! This brings the complexity that not every wireless devices (or wireless client) behaves. Some client likes to associate to an AP far-far-way even though there's an right above you.
By the way, out of curiousity, will your guest wireless go straight to the internet? If so, what's your switch infrastructure like and what's your internet bandwidth like?

Similar Messages

Setting a private flag on an activity for a specific Partner Function

Hi. I have this requirement. Display on private flag "My activities". Display just the Activities for a specific Function partner ej. Parner Responsible. Actually the system displays on "my activities" the activities not just for person responsible but also the activities for the created by or agent partner function
Report: Activity Monitor
Does anybody knows if there is a way to modify this to display the activities for a specific Function partner on the Biz Activity?

Max,
I tried to find any exits in this program but couldnt find any.
But I have following idea in mind:
1. I dont think you need to make this change on 'my activities'. Instead use of the third 'My ...activities' where you can give partner function & BP number as your own number. I hope it works.
2. Create a new program by copying the Actvity Monitor program and make the small change you are looking for somewhere in that program (I dont know where).
Sorry, I dont have any concrete solution for you.
Best Regards,
Vivek

EP6 SP13; Move tasks to a specific room

Hi all,
A user, created 10 multilevel tasks by using the iview <b>MyTasks</b>, while he wanted to create them under a specific Room.
Is there any way to find these tasks and move them under the specific room?
Any hint is more than welcome.
Many thanks in advance
Vasso

I've tried to do the same thing with admins enabling/disabling the client for 'troubleshooting'. A task has to move a system record from one existing group to another. So if the system doesn't already exist in that group, then it can't be moved. The only other thing I could come up with is to monitor for a security posture low/medium/high. Monitor for a dynamic process on boot for any rootkit and set the system to high security level. Assign the rule module for network lockdown on the system state of high security. Also to notify you, monitor for the untrusted rootkit detected rule to be triggered and an email will be sent to you for follow up.

My ipod nano 6th gen fell out of my pockey and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed

My ipod nano 6th gen fell out of my pocket and the screen cracked badly, is there any coverage for this under warranty? I just bought it a month ago. If not what are the options for getting it fixed? It is pretty frustrating, it fell from about 3 feet out of my pocket and now looks like it was beaten by a hammer.

Debbie:
deborahfromwindsor wrote:
he advises restarting by inserting the OSX disc and pressing down the C button to reboot from there then selecting disk utility, hard disk and repair.... Does he mean me to hold down the C key on the alpha keyboard or the ctrl key?
Should I just ask for my money back??? If it is a simple repair do I just literally push the disc in, push the power button and hold down the C button?
That's where I would begin, too, with
Repair Disk
Insert Installer disk and Restart, holding down the "C" key until grey Apple appears.
Go to Installer menu (Panther and earlier) or Utilities menu (Tiger) and launch Disk Utility.
Select your HDD (manufacturer ID) in the left panel.
Select First Aid in the Main panel.
(Check S.M.A.R.TStatus of HDD at the bottom of right panel, and report if it saysanything but Verified)
Click Repair Disk on the bottom right.
If DU reports disk does not need repairs quit DU and restart.
If DU reports errors Repair again and again until DU reports disk is repaired.
If DU reports errors it cannot repair you will need touse autility like TechTool Pro,Drive Geniusor DiskWarrior
First we need to determine if the issue you are experiencing with the computer is software or hardware based. Once we have gotten things sorted out there should be time enough to make you decision about keeping or returning it.
cornelius

How to get all oneorder header_guids for a specific reference PRODUCT_ID?

Hi,
in servicerequest we add iobjects as reference objects.
The iobject represents the machine a customer has an issue with.
Within the iobject master we have a PRODUCT_ID. The product_ID represents the machine type.
So:
1 product_id could have 1:n iobjects (machines)
1 servicerequest has 1:1 iobject.
The requirement is to select all oneorder documents with a specific product_id within the assigned iobject.
I do not realy know which database tables i have to join?
Or is there already a function module in standard which can be used?
Thank you
Kind regards
Manfred

Hi,
OBJECT_ID can´t be the import parameter for IOBJECTs because it is from type CRMT_OBJECT_ID - which is the ID of transactions and not IOBJECTs.
I have played arround with this function module CRM_SERVICE_PORTAL_SEARCH but haven´t found an option to get all servicerequests (one order documents) for a specific reference object or a list of reference objects.
Are there other ideas how to use this or another function module for my requirement.
Thanks a lot.
Kind regards
Manfred

SX20 and SX10 best practices for small conference rooms using built in Display Speakers

Hi,
Im planning to deploy some small meeting rooms using SX10 and SX20 codecs, I was wondering if someone could give me some key points to consider:
1. Display recommendation, nice built in speakers, low delay (goog performance with codec echo canceller) I wish to use a 60 - 70 inch Led TV (not yet defined which brand and model) I would like to receive some feedback about nice performance displays with nice audio and echo cancellation performance based on your experience.
2. What would be the drawbacks of using SX10 and SX20 in larger meeting rooms maybe 10 or 12 people?
3. When to use external microphone? or when is recommended to use only internal microphone?
Thanks in advance for your help.
Best Regards, have a nice day!

Pretty well any modern display should work well - different people are going to have different ideas about whether the speakers are any good or not, so you'll have to listen to a few yourself and make up your mid what you think is "better". The echo cancellation can be tweaked manually on the codec to suit the display if required (rather than leaving it on the "auto" setting which, in our installations, has caused more troubles than it's worth).
The main drawback of using the SX10, or the cheaper of the range of the SX20s, is the camera and the amount of zoom. In a larger room, you're not going to get a good close up view with a 2.5x camera. I'd suggest for a bigger room, you look at the 12x cameras.
As a general rule - use additional microphone(s) when you can't get someone within a 3m radius one of the other microphones. So in a larger room, you may need many.
Wayne
Please remember to rate responses and to mark your question as answered if appropriate.

Custom Report for the Stock and Stock value for a specific date

Hi SAP Gurus,
Is there any SAP standard t-code or any logic to get the transcations (additions (for example: Purchases) and subtractions (Sales) to the inventory) for a particular materials in a plant and with Total Stock and also Total Stock value when that particular transaction happened?
Our system is R/3 4.7
I looked at the MB5B, MBCE, MBCA, MC44, MB51 and some other standard T-codes but could not find the total stock value at the time of Transaction happened.
The history tables MBEWH and MARDH are updated after the month end closing procedures, right, which means I will have the inventory value changing every month if material has Price "S".
Thank you,
-Harter

Hi Harter,
Unfortunately, you cannot see in a single tcode the value of stock and stock quantity on a specific date. As you yourself have pointed out, we only have to make use of the history table MBEWH, MARDH for the month wise stock quantity and value. Along with that you should also make use of the table MBEW to take teh stock quantity and value. So the total value of stock on a particular date will be
Stock qnty = MBEWH value until the previous month (for teh specific valuation class, period etc) + MBEW value for the present date.
But this will nto work out if you want to find out teh stock quantity and stock value on a past date basis. For past data, only m onthwise data is available. For this anyway you can refer to MC.1 and so on reports.

Is there a way to search for a specific keyword within the sites to which the bookmarks are linked? I need to search all linked sites in the bookmark folder without having to open each page and "find" manually.

Currently, I must browse through 50 or so bookmarked pages to see if a specific topic is covered. I would like to be able to search all bookmarked pages at once for a specific keyword. For example, if I have 50 news sites bookmarked and I would like to see which pages have the word "tuna" in them, I would need to open each page individually and do a "find". If I could search all of those pages at once, then I would save an immense amount of time. I have looked on the add-ons and found nothing...

1. Create a smart album and in the drop down in the top right corner select file status
2. Check mark the file status box and select 'Offline'
Now you should have all your 'Offline' (Yellow Exclamation and/or Red Slash) files.
To reconnect..
1. Select the missing files.
2. Go to File and scroll to Manage Referenced Files
The dialog box will have one of the photos selected
3. Select the drive and folder that contains the referenced file and select it
4. Click 'Reconnect All'
This might not reconnect all of them, but the dialog box will still be open and you can reconnect the ones left.
Narvon
Message was edited by: Narvon

Enabling BW reports for a specific port

Hi All,
How to enable BW reports for a specific prot?.
Our requirement is Report should run FIRST, if I type the URL manually with the port we configure in SICF.
Thanks in Advance.
Regards,
Ravi Chelikani.

Ravi,
the port is configured per protocol (HTTP, HTTPS, etc) in transaction SMICM.
Regards,
Marc
SAP NetWeaver RIG, US BI

No Data to display in Application failure report for a specific Application

Hi ,
For a specific application,Application failure report showing no data to display but for the same application other reports shows value.
Application failure reports seems to work fine for some other application except few.Need to know the root cause.
Kindly help us to sort this issue.
Thanks & Regards,
Preethi S

Hi,
Is there any error message when you run Application Failure Analysis report for the specific application?
Does this application have any failure alerts?
You may also look into operation manager even logs to check is there any errors or warnings.
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Draft Documents View is empty for a specific user

Hi,
For a specific user, when he goes on the Document Draft Reports, the Sales Document sub-form is empty. Meaning that when he ticks the "Sales Documents" option, the boxes to choose specific Sales Document does not exist (e.g. Sales Quotation, Sales Orders etc.). This happens no matter what are the other options (e.g Open Only or User Option).
The other lists (Purchasing and Stock) are working properly. Again, all the other users do not experience the same issue as the form is working properly
The installation is on 2007A SP01
Any ideas?
Thanks in advance
Gerasimos

Hi Gerasimos.......
I'm sure this is a Bug in your system. If you have any of the adons then please Disconnect it and also try to create new Super User and give him license and then check with this new user for the same output.......
Else I'm afraid you need to raise a support ticket to SAP.......
Regards,
Rahul

How to set a MessageTextInput to be Read Only for a specific row?

Hi,
In Benefits Self Service, particularly the Update Beneficiaries page, it lists all your eligible Beneficiaries including yourself. The table has the following columns displayed for each beneficiary: Beneficiary, Relationship, Social Security Number, Primary %, Contingent %, Clear. This is the page where you allocate the Primary % and the Contingent %. The Primary % and Contingent % are MessageText Input.
We have a requirement that we wouldn't want an employee to designate himself/herself as a beneficiary. However, the employee is being listed as a beneficiary along with all the other eligible beneficiaries. Oracle says it is an intended functionality to include the employee in the beneficiary. Is there a way thru Controller Object extension to set the Primary % and Contingent % as Read Only but only for the row corresponding to the employee to prevent the employee from accidentally allocating himself/herself as a beneficiary.
I know there is the SPEL functionality but this requires me to add a transient attribute to the View Object corresponding to that table. But everytime I make a change to the View Object either by adding a transient attribute or some other changes, I end up getting an error on the standard Relation attribute of that view object. The error is something like "Relation set attribute failed for View Object". I cannot get pass this error and I'm not sure what's causing this. I see other people in this forum have encountered the same problem when extending view objects but no specific solution was offered nor any clear explanation of the cause.
So I thought if there's any way this could be done thru Controller Object extension. If so, please let me know how. The challenge for me I think is finding the bean corresponding to those Message Text Input but only for a specific row in the table.
Thanks,
Ronaldo

Hi,
I also tried extending the View Object but without changing anything to the SQL so it is exactly the same as the standard view object but I still get the "Attribute set for Relation in view object BeneficiaryPeopleVO1 failed". Based from this, extending the view object whether any change has been made or not affects the standard transient Relation attribute.
Here is the standard XML definition of the View Object if anyone is curious
<ViewObject
Name="BeneficiaryPeopleVO"
BindingStyle="Oracle"
CustomQuery="true"
RowClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVORowImpl"
ComponentClass="oracle.apps.ben.selfservice.enrollment.server.BeneficiaryPeopleVOImpl"
MsgBundleClass="oracle.jbo.common.JboResourceBundle"
FetchMode="FETCH_AS_NEEDED"
FetchSize="10"
UseGlueCode="false" >
<SQLQuery><![CDATA[
SELECT pcr.person_id person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
pcr.contact_type contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
nvl((select 'Y' from dual where (to_date(:1 , 'rrrr/mm/dd') between
          nvl(pcr.date_start,to_date(:2 , 'rrrr/mm/dd')) and
          nvl(pcr.date_end,to_date(:3 , 'rrrr/mm/dd'))) and
          (pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))), 'N') rel_exists_flag
FROM per_people_f con,
per_contact_relationships pcr,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE pcr.personal_flag = 'Y'
AND (pbn.pl_bnf_id is not null or
(to_date(:4 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:5 ,'rrrr/mm/dd'))
AND nvl(pcr.date_end,to_date(:6 ,'rrrr/mm/dd'))
          and pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt)))     --Bug 4297137
AND pcr.contact_person_id = con.person_id
and pen.person_id = pcr.person_id
AND pbn.bnf_person_id (+) = con.person_id
AND to_date(:7 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND pcr.person_id = :8
and pen.prtt_enrt_rslt_id = :9
and to_date(:10 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:11 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and pbn.prtt_enrt_rslt_id (+) = :12
and ((to_date(:13 ,'rrrr/mm/dd') between
nvl(pcr.date_start,to_date(:14 ,'rrrr/mm/dd')) and
nvl(pcr.date_end,to_date(:15 ,'rrrr/mm/dd'))) or
((pcr.date_start = (select max(pcr2.date_start)
from per_contact_relationships pcr2
where pcr2.contact_person_id = pcr.contact_person_id
and pcr2.person_id = pcr.person_id
and pcr2.personal_flag = 'Y')) and
not exists (select null
from per_contact_relationships pcr3
where pcr3.contact_person_id = pcr.contact_person_id
and pcr3.person_id = pcr.person_id
and pcr3.personal_flag = 'Y'
and to_date(:16 ,'rrrr/mm/dd') between
nvl(pcr3.date_start,to_date(:17 ,'rrrr/mm/dd'))
and nvl(pcr3.date_end,to_date(:18 ,'rrrr/mm/dd')))
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pcr.person_id,
pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
pcr.contact_type,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id,
          pcr.date_start,
          pcr.date_end,
          pil.lf_evt_ocrd_dt,
          con.date_of_death
union
SELECT to_number(null) person_id,
pen.prtt_enrt_rslt_id prtt_enrt_rslt_id,
con.first_name ||' '||con.last_name || ' ' || con.suffix Beneficiary,
con.national_identifier Ssn,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) contingent_pct,
con.person_id bnf_person_id,
con.business_group_id,
pen.per_in_ler_id,
pbn.pl_bnf_id pl_bnf_id,
pbn.object_version_number object_version_number,
pbn.effective_start_date,
'SLF' contact_type,
con.full_name beneficiary_full_name,
sum(decode(pbn.prmry_cntngnt_cd,'PRIMY',pbn.pct_dsgd_num,0)) Db_Primary_pct,
sum(decode(pbn.prmry_cntngnt_cd,'CNTNGNT',pbn.pct_dsgd_num,0)) db_contingent_pct,
DECODE(pbn.pl_bnf_id, null, 'DeleteIconDisabled', 'DeleteIconEnabled') delete_switcher,
pen.pl_id pl_id,
pen.oipl_id oipl_id,
'Y' rel_exists_flag
FROM per_people_f con,
ben_pl_bnf_f pbn,
ben_prtt_enrt_rslt_f pen,
     ben_per_in_ler pil
WHERE
pbn.bnf_person_id (+) = con.person_id
AND to_date(:19 ,'rrrr/mm/dd') between pbn.effective_start_date (+)
AND pbn.effective_end_date (+)
AND con.person_id = :20
and con.person_id = pen.person_id
and pen.prtt_enrt_rslt_id = :21
and to_date(:22 , 'rrrr/mm/dd') between con.effective_start_date and con.effective_end_date
and to_date(:23 , 'rrrr/mm/dd') between pen.effective_start_date and pen.effective_end_date
and pil.per_in_ler_id = pen.per_in_ler_id
and pil.per_in_ler_stat_cd NOT IN('VOIDD', 'BCKDT')
and (pbn.pl_bnf_id is not null or pil.lf_evt_ocrd_dt <= nvl(con.date_of_death,pil.lf_evt_ocrd_dt))     --Bug 4297137
and pbn.prtt_enrt_rslt_id (+) = :24
and (pbn.pl_bnf_id is null or
exists (select null from ben_per_in_ler pil2
where pil2.per_in_ler_id = pbn.per_in_ler_id
and pil2.per_in_ler_stat_cd not in ('VOIDD','BCKDT')))
GROUP BY pen.prtt_enrt_rslt_id,
con.last_name,con.first_name,con.suffix,
con.full_name,
con.national_identifier,
con.date_of_birth,
con.person_id,
con.business_group_id,
pen.per_in_ler_id,
pl_bnf_id,
pbn.object_version_number,
pbn.effective_start_date,
pen.pl_id,
pen.oipl_id
ORDER BY 3,14
]]></SQLQuery>
<DesignTime>
<Attr Name="_isCodegen" Value="true" />
<Attr Name="_version" Value="9.0.3.13.75" />
<Attr Name="_CodeGenFlagNew" Value="36" />
<Attr Name="_rowSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewRowImpl" />
<Attr Name="_objectSuperClassName" Value="oracle.apps.fnd.framework.server.OAPlsqlViewObjectImpl" />
</DesignTime>
<ViewAttribute
Name="PersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERSON_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PrttEnrtRsltId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PRTT_ENRT_RSLT_ID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Beneficiary"
IsQueriable="false"
IsPersistent="false"
Precision="332"
Type="java.lang.String"
AliasName="BENEFICIARY"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="Ssn"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="SSN"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PrimaryPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Type="oracle.jbo.domain.Number"
AliasName="PRIMARYPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ContingentPct"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="CONTINGENTPCT"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BnfPersonId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BNFPERSONID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="BusinessGroupId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="BUSINESSGROUPID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PerInLerId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PERINLERID"
ColumnType="$none$"
Expression="'See the SQL...'"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="PlBnfId"
IsQueriable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PL_BNF_ID"
ColumnType="$none$"
Expression="PL_BNF_ID"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="ObjectVersionNumber"
IsQueriable="false"
IsPersistent="false"
Precision="9"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OBJECT_VERSION_NUMBER"
ColumnType="$none$"
Expression="OBJECT_VERSION_NUMBER"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="EffectiveStartDate"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Date"
AliasName="EFFECTIVE_START_DATE"
ColumnType="$none$"
Expression="EFFECTIVE_START_DATE"
SQLType="DATE" >
</ViewAttribute>
<ViewAttribute
Name="ContactType"
IsQueriable="false"
IsPersistent="false"
IsNotNull="true"
Precision="30"
Type="java.lang.String"
AliasName="CONTACT_TYPE"
ColumnType="$none$"
Expression="CONTACT_TYPE"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="30" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="BeneficiaryFullName"
IsQueriable="false"
IsPersistent="false"
Precision="240"
Type="java.lang.String"
AliasName="BENEFICIARY_FULL_NAME"
ColumnType="$none$"
Expression="BENEFICIARY_FULL_NAME"
SQLType="VARCHAR" >
<DesignTime>
<Attr Name="_DisplaySize" Value="240" />
</DesignTime>
</ViewAttribute>
<ViewAttribute
Name="DbPrimaryPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_PRIMARY_PCT"
ColumnType="$none$"
Expression="DB_PRIMARY_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="DbContingentPct"
IsQueriable="false"
IsPersistent="false"
Type="oracle.jbo.domain.Number"
AliasName="DB_CONTINGENT_PCT"
ColumnType="$none$"
Expression="DB_CONTINGENT_PCT"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="Relation"
IsQueriable="false"
IsPersistent="false"
Type="java.lang.String"
AliasName="Relation"
ColumnType="$none$"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="DeleteSwitcher"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="DeleteSwitcher"
ColumnType="VARCHAR2"
Expression="DeleteSwitcher"
SQLType="VARCHAR" >
</ViewAttribute>
<ViewAttribute
Name="PlId"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="PlId"
ColumnType="VARCHAR2"
Expression="PlId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="OiplId"
IsUpdateable="false"
IsPersistent="false"
Precision="15"
Scale="0"
Type="oracle.jbo.domain.Number"
AliasName="OiplId"
ColumnType="VARCHAR2"
Expression="OiplId"
SQLType="NUMERIC" >
</ViewAttribute>
<ViewAttribute
Name="RelExistsFlag"
IsQueriable="false"
IsPersistent="false"
Precision="30"
Type="java.lang.String"
AliasName="REL_EXISTS_FLAG"
ColumnType="VARCHAR2"
Expression="REL_EXISTS_FLAG"
SQLType="VARCHAR" >
</ViewAttribute>
</ViewObject>
Thanks,
Ronaldo

How can I perform data logging for a specific time??

hello everyone,
I am quite new in labview and I have a basic question regarding data logging. Currently I am using a cRIO9074 and doing some data logging for my test. The data logging it self works ok so far.
But my problem is I would like to write my datas in a text file either for a specific time interval (ex)10 seconds) or for a specific amounts of data (ex)500 Samples). Can anyone give me some help regarding my problem?? Attached you can find my RT.vi
I would appreciate for anyhelp!
Regards
Yun
Attachments:
BP250 Encoder Position & Velocity (Host).vi ‏92 KB

Run your loggging program for that time. When your program terminates then it will write all the logged data so far in text file.
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

I signed up for my apple account while living in Canada, and now I lives in the US. I am looking for a specific app that apparently is only available through the US app store. How can I change my account to the US Apple Store?

As long as you have a form of payment (credit or debit card) with a USA source, and with a billing address in the USA, then you just need to change your payment information on your account to that, change your country in the store settings, and you will then be able to shop in the USA store.
Your AppleID will work in any country's store, as long as your payment source and billing addres are also specific to that country (and you are in that country as well, as there may be IP filters in place to stop use outside of the country).

How to delete the coverages for an ACTIVE service contract ?

Hi ,
     I have created coverages for few service lines for a service contract in R12. The contract is in ACTIVE status. If it was in ENTERED state, I could use OKS_COVERAGES_PUB.DELETE_COVERAGE to delete the coverages. But this contract is in ACTIVE status.
     Basically I want the lines lse_id=2,3 removed for a particular line (lse_id=1) which were created by using OKS_CONTRACTS_PUB.CREATE_SERVICE_LINE. This contract has a standard coverage and hence there should not be lines with lse_id=2,3 for that particular service line .
     Also, I am not able to delete a coverage for an EXPIRED contract.
     Please let me know if you need more information on this.

Hi 2619098
Did you find a solution for this? I am having the same problem. Please advice.
Regards

Wi-Fi coverage for a specific room (Concrete Pillars)

Similar Messages

Maybe you are looking for