Wi-fi disabled after updating to 2.0.1

I let my phone run the update over night last night (restoring to the backup I made prior) and none of the apps worked and the wi-fi was disabled (wi-fi settings are grayed out in the control panel and read "No Wi-Fi").
I've since reset it, then finally placed it in recovery mode and restored to new, but I still have the same issue.
I should note that when I initially began the update process, the phone went into password lock while I waited for the download. iTunes wouldn't allow the update to proceed until the phone was unlocked, but there was no way to unlock it. So the original update got interrupted and I had to put the phone in recovery mode right from the gate to get the update started.
So, disabled wi-fi and app insta-crash...
What gives?
========
Update: Insta-crash issue seems to be resolved from last attempt to restore. Wi-fi issue still present
Message was edited by: bummpy

There's a long thread on this problem. You may have to replace the phone.
http://discussions.apple.com/thread.jspa?threadID=1648549&tstart=30

Similar Messages

  • My ipad is locked and disabled after updating to iso 7.  I never had a password on it.

    my ipad is locked and disabled after updating to iso 7.  I never had a password on it.

    Even though you never had a passcode enabled, try the help here >  iOS: Forgotten passcode or device disabled after entering wrong passcode

  • Ipad disabled after updating to ios 8

    I updated my ipad 2 to ios 8 and it asked for a password, I never had a lock on this device, I guessed the same one I have on my iPhone but that didn't work, now it is completely disabled.   I don't have iTunes and never plugged this iPad into a computer.
    Everything is pointing now to losing all my data, but I cannot!! there are pictures of my best friend that passed away in January, I cannot lose those!  I see lots of people are having this problem  PLEASE help me get my pictures. They are very dear to me.

    MeganTD,
    I completely understand how you feel.  This has happened to me as well when I updated to IOS 8 when it first came out and now I can't get into my Ipad.  The difference is that I actually had a passcode on it and just typed it in just like the million other times I did and it says that the passcode was "wrong."  I thought it was just a mistake so I did it again and it said it was "wrong again, please try in 15 minutes."  This went on for about a day and when I tried to login again with the passcode it completely locked me out to where it says to "connect to itunes" which I did but the Ipad doesn't show up unless I put it into recovery mode, which doesn't help either because I don't want to restore my Ipad until I back it up first. 
    I even took it to the apple store to the genius bar and explained my situation and they couldn't even help me, saying that unless you have a backup on your computer there is no way to recover your data on your ipad before restoring it.  I thought that was completely ridiculous that it wasn't my fault that the Ipad is disabled after updating to IOS 8 and that there is absolutely NO WAY of recovering your data.  I even asked if there was 3rd party software that could backup the ipad before recovering and they couldn't give me that information either. 
    I have been looking all around the internet for a solution but to no avail.  I hope there is some information out there that can help us because there has to be SOME WAY that you can get into your ipad and backup without having to rely just on itunes and icloud.

  • HT4623 my i pad disabled after update what can i do

    help my i pad has disabled after updating and will not accept my passcode and will not sync with i tunes as i tunes wants the passcode which it will not accept

    Forgot password or device disabled
    http://support.apple.com/kb/ht1212

  • Desktop effect disabled after update

    Hello,
    After updating kde 4.5 today, my desktop effects disabled and my awn navigator doesn't work properly.
    When try to enable it, I get the message: Desktop effects suspended by other application. When restart with Alt-F12, awn disappears; when I shut down kde, I get the message -- Desktop effects is too slow disabled.
    Before update everything worked perfectly.
    Proc: dual core 2.6
    Video: ati 3600
    memory: 6 gig
    Any idea what could be wrong?
    jmak

    https://bbs.archlinux.org/viewtopic.php?id=103522

  • DOWNLOAD BUTTON DISABLED AFTER UPDATE WITH NEW VER...

    Hi.. After update my E72 with newer version of OVI store, download button has been disabled and unable to download anything from OVI store. Further I m also unable to update the files in "sign in software" in ovi files... please help me fast, what should I do??? 

    Hi DD16, Welcome to the Nokia Forums.
    Please be try and sign out of your nokia account and relog back in, also be sure that you are connected to a stable WiFi connection, and also make sure that you have enough free space on your phone memory to install any new applications.
    If you still experience issues with your store account please try and install Store QML from betalabs.
    Please let me know if your problem persists or not.
    Sheldrick
    Press the 'Accept As Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

  • Submit button in Compressor disabled after update Pro Applications Update 2010-02

    Dear all,
    I recently bought FCS and the whole software works fine after installation. However, I had to use Compressor over the last couple of days and the submit button was completely disabled and in the cluster field the option this computer had dissapeard. I checked this forum for a solution and found it. It seems that the problem was Qmaster. After reinstalling both Qmaster and Compressor everything works again. I have use the following set of instructions:
    http://www.digitalrebellion.com/blog/posts/how_to_reinstall_compressor_and_qmast er.html
    The problem is that now each time I do a software update, I am asked to install the Pro Applications Update 2010-02. After installing this update, the problem occurs again (the submit button is grayed/greyed out). It seems that in my computer the update creates a problem.
    Does anyone have the same issue and if so, what suggestion you recommend?. At the moment I am avoiding the update, but I may me missing important bug and other fixes.
    Thanks a lot,
    Oliver

    I have experimented a bit and got the problem sorted. Iuninstalled FCS using the uninstaller from http://www.digitalrebellion.com/fcsremover/.Before installing the whole suite again, I realised there was and additionalApple Qmaster package in the Applications folder. I deleted this file and emptythe trash. Then did a fresh installation of FCS, performed an update andinstalled Pro Applications Update 2010-02.
    And now all is up and running workingperfectly.
    Oliver

  • Bluetooth Disabled After Updates

    I have the 8gb iPhone and I'm using it with the Apple bluetooth headset. Each time a new update comes out it disables my bluetooth functions on the phone. I go to the settings, general, bluetooth.
    After an iphone update is installed I go to re-enable bluetooth and all it does is display the spinning circle. It will spin like this for as long as you like trying to enable bluetooth.
    I've docked the freshly updated iphone with the apple headset to get it to auto pair (since bluetooth wont enable I can't manually pair) and all it will do is charge the iphone and headset. it wont pair or activate bluetooth.
    I've tried to restore then load my old settings but that doesn't work. It still won't activate bluetooth.
    The only way to get bluetooth working again after an update is to do a restore then treat the phone as a brand new iphone. I can not load any of my old preferences. I have to go through the menus and redo all my sync settins and phone settings This is a pain and seems to be the only way to get bluetooth working again.
    Has anyone else experienced this issue?
    (btw, I really like the apple headset. Fits in my ear great and I've had no complaints from people on the other end of the call. Only issue is the phone needs to be closer than 3ft to the phone to get best listening quality)

    Mellimelvin,
    When you go to Settings -> General -> About, is there a Bluetooth address showing?
    If not, try restoring the iPhone and setting it up as new. If it still isn't showing your iPhone will need to be serviced.
    Hope this helps,
    Nathan C.

  • HT4623 My phone is disabled after updating the latest version, what do I do/

    How do I get my phone abled after installing the latest version?  It's locked and indicates "disabled"

    Try Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...
    But... if the Device has been Modified... this will Not necessarily work.

  • When i updated my Iphone 4s to ios 7.0.2 suddenly wifi button disable after update and now its is now enabling. i have tried many times to restore, also tried with reset all setting from phone my whole date contents got erased but no solution over.

    I need a solution over it. i have check on your cummunity people saying to keep the phone in refrigerator that will solve the WIFI problem. i hope apple are considering on the quwries of the people such a major case need to be sort out soon where all the data and contents are getting deleted from phone on the researt and also upgrading to the new IOS 7.0.2 or IOS 7.0.3 the WIFI buttopn is grayed (disabled). being on the global markets and such issues on upgrading then its better to be with the previos ios atleast it would work fine. even some times when i switch to HDR mode in cammera it crashes. some time it captures photo but when i try to view its total black dont even open on other phones or computers.
    i kindly request you to go throuth the all the quesries and do revert on the same ASAP.

    Apple guys are deleting posts. I have found my posts have been deleted. Apple should MUST let us downgrade at least to previous release from current which was working fine.

  • HT1212 my ipad disable after update ios7

    hi, i am from Azerbaijan.
    when i was away my cousins entered passcode  incorrect
    and my ipad is disable...
    how you can help me restore my ipad please help me

    Put the device in Recovery Modehttp://support.apple.com/kb/ht1808
    and restore

  • SMB Symbolic Links disabled after update to 10.6.4

    I just found out how to fix Access Denied messages for any WIndows share that includes a symbolic link directory. Due to a security issue the default was changed to:
    \[global\]
    wide links = no
    This disables access to symbolic links.
    See http://www.samba.org/samba/news/symlink_attack.html
    I changed it back to yes for now to get it working. Will look into this more when the network is not in use. This should have been noted in the smb.conf file.

    For the non-geeks in the audience. 10.6.4 broke access to smb folders being shared by a 10.6.4 machine. My popcorn hour media stremer would no longer use symbolic links as a means to find all my movies spread out on 2 disks. It could see the links as files and clicking on them gave an error message. In my case these links a symbolic links of the folders on my 2 movie drives, labeled sci-fi, westerns, etc. All the links are in my Movies folder in my main user folder. This is setup to be a shared folder and is accessed as an SMB share with my media streamers.
    Apple was apparently fixing a security issue related to symbolic links but killed the ability to set up and use symbolic links like I need them for my home network media streamers.
    To fix do the following:
    Fixing the symbolic link issue with Samba/SMB access problem in 10.6.4
    
* Open smb.conf on the samba server in your favorite text editor
    put the following in a terminal window:
    sudo nano /etc/smb.conf
    
* Find the global samba settings section under [global] and edit the following line:
    wide links = no
    change to:
    wide links = yes
    This enables access to symbolic links.
    nano is a text editor for the terminal. Use the arrow keys to get to the word no in the above string delete no and type yes.
    The control-x to exit and you will be asked to save the file.
    Hit return to save the modified file, do not choose any of the save options.
    For the terminal editor nano, control is the modifier key in dialogs that looks like a upside-down-superscript v.

  • Navigation disabled after updating to FF4

    * Bulleted list itemFrustrating beyond words.
    * Bulleted list itemThe arrow buttons are just uselessly hanging there.
    * Bulleted list itemIt should the most simple to thing in the world to just be able to go '''BACK''' to the '''PREVIOUS PAGE!!!'''

    Try the Firefox SafeMode. <br />
    ''A troubleshooting mode, which disables most Add-ons.'' <br />
    ''(If you're not using it, switch to the Default Theme.)''
    # You can open the Firefox 4.0 SafeMode by holding the '''Shft''' key when you use the Firefox desktop or Start menu shortcut.
    # Or use the Help menu item, click on '''Restart with Add-ons Disabled...''' while Firefox is running. <br />
    ''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut (without the Shft key) to open it again.''
    If it is good in the Firefox SafeMode, your problem is probably caused by an extension, and you need to figure out which one. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • After updating to Firefox 7.0.1, menu bar for Google,yahoo, Facebook (message,notification,profile,home) and others site are disabled. How can solve this problem?

    after updating to Firefox 7.0.1, menu bar for Google(web ,image,video,map etc),yahoo, Facebook (message,notification,profile,home) and others site are disabled. even I cant log out from different sites cz the log out bar is completely disabled. I tried with Firefox 4;5 and 6, same problem exist . I tried by active all add ons for facebook, same problem exist. If I use internet explorer , I don't find such problem with it.
    How can I solve this problem?

    Thanks a lot for your swift response. And sorry if it was a bit too hectic to go through my detailed query (which I did because it was misunderstood when I asked previously). As I've mentioned above, I was informed that updating to 5.0.1 would '''require''' me to '''delete''' the current version and then install the new one. And doing so will involve losing all my bookmarks. I guess I should have been more specific and detailed there. By losing, I didn't mean losing them forever. I'm aware that they're secured in some place and deleting and installing the software doesn't harm its existence. What I meant that if I install the new version, I'd have to delete the old one. And after installing the new version, I'd have to transfer them (bookmarks) back from wherever they are. Get it? When it updated from 3.6.9 to 3.6.13, and from 3.6.13 to 3.6.18, I didn't need to follow that process. They were already present on their own.
    BTW, I'm having no problems with 3.6.18 but after learning about the existence of version 5.0.1, I'm a bit too eager to lay my hands over it.
    Thanks for your help; hope this wasn't extremely long.

  • Bought LR 5 back in March.  After update to 5.7.1 I get a message that development module is disabled and that my 30 day trial? has expired.  Since I am not using a trial version I have no idea what is going on

    After update to 5.7.1 I get a message that my "Develop module is disabled."  It asks me to please renew my membership.  When I open Creative cloud I don't get an option to enter my existing serial number and am told my 30 day trial has expired.  What can I do?

    You downloaded the creative cloud update by mistake. It will be necessary for you to uninstall Lightroom and then install using a download from this website:
    Product updates
    This will not do anything to your catalog for your images. So after you install the appropriate version you should be able to start right where you left off.

Maybe you are looking for