Wi-Fi doesn't connect after update to 2.0

My iPod touch worked fine on Wi-Fi before the update, now it won't connect. Just says "Unable to join the network". Have tried on WEP, WPA and no security, same message each time. The router is a Linksys WAG54G V.3 Firmware Version: v1.00.22. My MacBook Pro still connects to the wireless network fine. Does anyone have any ideas what can I do?!

I have tried the network reset in General settings 3 times,,,no go. I have checked for updates for my airport extreme and I am completely up to date. Spoke with a couple of guys at Apple but they are overwhelmed with callers. So no Internet tonight on the Touch. Will have to wait to try out the new apps. I will check back in with the discussion board to see if anyone has had luck with another approach. If anyone has had success with an approach other than the two mentioned above, would love to hear from you! Thanks!

Similar Messages

  • HT4199 this still didn't fix iPad connectivity after updating to iOS 6.0.1 !!! intermittent wi-fi connection, even with a direct line-of-sight to the router.

    "HT4199: iOS and OS X: Recommended settings for Wi-Fi routers and access points"
    this still didn't fix iPad connectivity after updating to iOS 6.0.1 !!! intermittent wi-fi connection, even with a direct line-of-sight to the router.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Both iPod and iPad won't connect after update.

    Both iPod and iPad won't connect after update.  iTunes says "can't allocate a resource"

    I had the same problem after updating to iOS 7 today. I did follow the advice on another site, but additionally rebooted my iMac. Worked after that.
    Follow these steps to reset the Lockdown folder:
    Disconnect all iOS devices from your computer and quit iTunes.
    From the Finder, choose Go > Go to folder.
    Type the following and then press Return:
    /var/db/lockdown.
    The Finder window should display one or more files with long alphanumeric file names.
    In the Finder, choose Edit > Select all. Then, choose File > Move to Trash. Enter an administrator password if prompted.
    Note: Do not delete the Lockdown folder itself. Delete only the files contained inside the Lockdown folder.
    Reconnect your iOS device and open iTunes
    My Additional step: reboot the Mac. Your iPad should give the first indication that it has worked by asking you to "trust this computer" or some such. Agree. Then iTunes should have reopened with your iPad showing and syncing.

  • Wi-fi won't connect after updating to iOS5

    wi-fi wont connect after updating to iOS5

    This is what worked for me:
    1. In wireless settings, select your router and then selet "forget this network."
    2. Turn wireless off.
    3. Hard restart the phone (press power switch and main button simultaneously, hold them until the phone turns off.
    4. Reboot your router, preferably unplug the power cord completely.
    5. After your router is up and running, turn wireless back on, select your network, then enter your password.
    For me, the fix was immediate.  I hope it works for you! 

  • My E-Mail Accounts Pop3 doesn´t work after update Lion

    My E-Mail Accounts Pop3 doesn´t work after update Lion.

    Same here,and Apple support did not have a solution!!

  • FF doesn't start after update to version 27.0.1

    FF doesn't start after update to version 27.0.1
    Crash ID: bp-2bc18734-d643-4843-a10f-fd6102140214

    Firefox 27.0.1 is too new for me to know what unique issues it might have. I will message you a link to download the installer for Firefox 27.0 to see whether that reverses the problem.

  • ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

    ZawgyiOne Font doesn't work after updating to iOS 7.1, please advice

    hi Mr.Sianpu
    nice to know you, my name Kiemtheng from Cambodia, i got a problem with Khmer Unicode font at my ipad which i just update from IOS 7.0.1 to ISO 7.1.1 , It not support with Khmer font which used to appear at the old version , the problem happen as the same Lian Tuang Question, and can you tell me how to fix this problem , hope to hear a good new from your, for khmer unicode font which support with Nokora and Battombong
    http://adkhmer.com/app/iphone/font_khmer_ios7_no_jailbreak/Nokora.mobileconfig
    https://docs.google.com/file/d/0B8798SqaxK-JS1B5T3hjNkJPQUE/edit?pli=1
    thanks

  • TS1398 I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting
    http://www.apple.com/support/ipad/wifi/
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I have problems with my wifi connection after update the ios6 any advice

    I have problems with my wifi connection after update the ios6 any advice

    Ask your question in an iPAD forum.
    This is the OS X Mountain Lion forum.

  • Xorg doesn't start after update

    After updating this day (my system was last updated at the beginning of July
    this year) I have some problem with Xorg. The server just doesn't start, and
    the screen is black. I can get back to the console with Alt-F1.
    Here's my Xorg.0.log:
    X.Org X Server 1.4.2
    Release Date: 11 June 2008
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 2.6.25-ARCH i686
    Current Operating System: Linux Data 2.6.25-ARCH #1 SMP PREEMPT Mon Jul 14 15:25:51 UTC 2008 i686
    Build Date: 21 June 2008 05:47:59PM
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Module Loader present
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Tue Aug 5 18:54:03 2008
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) ServerLayout "Simple Layout"
    (**) |-->Screen "Screen 1" (0)
    (**) | |-->Monitor "LCD Display"
    (**) | |-->Device "SiS"
    (**) |-->Input Device "Mouse1"
    (**) |-->Input Device "Keyboard1"
    (==) Automatically adding devices
    (==) Automatically enabling devices
    (==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
    (**) FontPath set to:
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1,
    /usr/share/fonts/misc,
    /usr/share/fonts/100dpi:unscaled,
    /usr/share/fonts/75dpi:unscaled,
    /usr/share/fonts/TTF,
    /usr/share/fonts/Type1
    (==) RgbPath set to "/usr/share/X11/rgb"
    (==) ModulePath set to "/usr/lib/xorg/modules"
    (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    (II) No APM support in BIOS or kernel
    (II) Loader magic: 0x81e0a60
    (II) Module ABI versions:
    X.Org ANSI C Emulation: 0.3
    X.Org Video Driver: 2.0
    X.Org XInput driver : 2.0
    X.Org Server Extension : 0.3
    X.Org Font Renderer : 0.5
    (II) Loader running on linux
    (II) LoadModule: "pcidata"
    (II) Loading /usr/lib/xorg/modules//libpcidata.so
    (II) Module pcidata: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Video Driver, version 2.0
    (--) using VT number 7
    (II) PCI: PCI scan (all values are in hex)
    (II) PCI: 00:00:0: chip 1039,0630 card 0000,0000 rev 31 class 06,00,00 hdr 80
    (II) PCI: 00:00:1: chip 1039,5513 card 1039,5513 rev d0 class 01,01,80 hdr 80
    (II) PCI: 00:01:0: chip 1039,0018 card 0000,0000 rev 00 class 06,01,00 hdr 80
    (II) PCI: 00:01:1: chip 1039,0900 card 1043,1455 rev 82 class 02,00,00 hdr 00
    (II) PCI: 00:01:2: chip 1039,7001 card 1039,7001 rev 07 class 0c,03,10 hdr 00
    (II) PCI: 00:01:3: chip 1039,7001 card 1039,7000 rev 07 class 0c,03,10 hdr 00
    (II) PCI: 00:01:4: chip 1039,7018 card 1039,7018 rev 02 class 04,01,00 hdr 00
    (II) PCI: 00:01:6: chip 1039,7013 card 1043,1456 rev a0 class 07,03,00 hdr 00
    (II) PCI: 00:02:0: chip 1039,0001 card 0000,0000 rev 00 class 06,04,00 hdr 01
    (II) PCI: 00:0a:0: chip 1180,0476 card 1000,0000 rev 80 class 06,07,00 hdr 82
    (II) PCI: 00:0a:1: chip 1180,0476 card 1800,0000 rev 80 class 06,07,00 hdr 82
    (II) PCI: 01:00:0: chip 1039,6300 card 1043,1452 rev 31 class 03,00,00 hdr 00
    (II) PCI: End of PCI scan
    (II) Host-to-PCI bridge:
    (II) Bus 0: bridge is at (0:0:0), (0,0,6), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 0 I/O range:
    [0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) Bus 0 non-prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) Bus 0 prefetchable memory range:
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    (II) PCI-to-ISA bridge:
    (II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
    (II) PCI-to-PCI bridge:
    (II) Bus 1: bridge is at (0:2:0), (0,1,1), BCTRL: 0x0008 (VGA_EN is set)
    (II) Bus 1 I/O range:
    [0] -1 0 0x0000a000 - 0x0000afff (0x1000) IX[b]
    (II) Bus 1 non-prefetchable memory range:
    [0] -1 0 0xd1800000 - 0xd1ffffff (0x800000) MX[b]
    (II) Bus 1 prefetchable memory range:
    [0] -1 0 0xd8000000 - 0xe7efffff (0xff00000) MX[b]
    (II) PCI-to-CardBus bridge:
    (II) Bus 2: bridge is at (0:10:0), (0,2,5), BCTRL: 0x0580 (VGA_EN is cleared)
    (II) Bus 2 I/O range:
    [0] -1 0 0x00001000 - 0x000010ff (0x100) IX[b]
    [1] -1 0 0x00001400 - 0x000014ff (0x100) IX[b]
    (II) Bus 2 non-prefetchable memory range:
    [0] -1 0 0x24000000 - 0x27ffffff (0x4000000) MX[b]
    (II) Bus 2 prefetchable memory range:
    [0] -1 0 0x20000000 - 0x23ffffff (0x4000000) MX[b]
    (II) PCI-to-CardBus bridge:
    (II) Bus 6: bridge is at (0:10:1), (0,6,9), BCTRL: 0x0580 (VGA_EN is cleared)
    (II) Bus 6 I/O range:
    [0] -1 0 0x00001800 - 0x000018ff (0x100) IX[b]
    [1] -1 0 0x00001c00 - 0x00001cff (0x100) IX[b]
    (II) Bus 6 non-prefetchable memory range:
    [0] -1 0 0x2c000000 - 0x2fffffff (0x4000000) MX[b]
    (II) Bus 6 prefetchable memory range:
    [0] -1 0 0x28000000 - 0x2bffffff (0x4000000) MX[b]
    (--) PCI:*(1:0:0) Silicon Integrated Systems [SiS] 630/730 PCI/AGP VGA Display Adapter rev 49, Mem @ 0xd8000000/27, 0xd1800000/17, I/O @ 0xa800/7
    (II) Addressable bus resource ranges are
    [0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
    [1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
    (II) OS-reported resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) PCI Memory resource overlap reduced 0xd4000000 from 0xd7ffffff to 0xd3ffffff
    (II) Active PCI resource ranges:
    [0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
    [1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
    [2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
    [3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
    [4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
    [5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
    [6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
    [7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
    [8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
    [9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
    [11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
    (II) Active PCI resource ranges after removing overlaps:
    [0] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
    [1] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
    [2] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
    [3] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
    [4] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
    [5] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
    [6] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
    [7] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
    [8] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
    [9] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [10] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
    [11] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [12] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
    (II) OS-reported resource ranges after removing overlaps with PCI:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    (II) All system resource ranges:
    [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
    [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
    [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
    [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
    [4] -1 0 0xd2000000 - 0xd2000fff (0x1000) MX[b]
    [5] -1 0 0xd2800000 - 0xd2800fff (0x1000) MX[b]
    [6] -1 0 0xd3000000 - 0xd3000fff (0x1000) MX[b]
    [7] -1 0 0xd3800000 - 0xd3800fff (0x1000) MX[b]
    [8] -1 0 0xd4000000 - 0xd3ffffff (0x0) MX[b]O
    [9] -1 0 0xd1800000 - 0xd181ffff (0x20000) MX[b](B)
    [10] -1 0 0xd8000000 - 0xdfffffff (0x8000000) MX[b](B)
    [11] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
    [12] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
    [13] -1 0 0x0000b400 - 0x0000b47f (0x80) IX[b]
    [14] -1 0 0x0000b800 - 0x0000b8ff (0x100) IX[b]
    [15] -1 0 0x0000d000 - 0x0000d0ff (0x100) IX[b]
    [16] -1 0 0x0000d400 - 0x0000d4ff (0x100) IX[b]
    [17] -1 0 0x0000d800 - 0x0000d80f (0x10) IX[b]
    [18] -1 0 0x0000a800 - 0x0000a87f (0x80) IX[b](B)
    (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    (II) "glx" will be loaded by default.
    (II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
    (II) "record" will be loaded by default.
    (II) "dri" will be loaded by default.
    (II) LoadModule: "dbe"
    (II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
    (II) Module dbe: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension DOUBLE-BUFFER
    (II) LoadModule: "extmod"
    (II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
    (II) Module extmod: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension SHAPE
    (II) Loading extension MIT-SUNDRY-NONSTANDARD
    (II) Loading extension BIG-REQUESTS
    (II) Loading extension SYNC
    (II) Loading extension MIT-SCREEN-SAVER
    (II) Loading extension XC-MISC
    (II) Loading extension XFree86-VidModeExtension
    (II) Loading extension XFree86-Misc
    (II) Loading extension DPMS
    (II) Loading extension TOG-CUP
    (II) Loading extension Extended-Visual-Information
    (II) Loading extension XVideo
    (II) Loading extension XVideo-MotionCompensation
    (II) Loading extension X-Resource
    (II) LoadModule: "freetype"
    (II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
    (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
    compiled for 1.4.2, module version = 2.1.0
    Module class: X.Org Font Renderer
    ABI class: X.Org Font Renderer, version 0.5
    (II) Loading font FreeType
    (II) LoadModule: "glx"
    (II) Loading /usr/lib/xorg/modules/extensions//libglx.so
    (II) Module glx: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (==) AIGLX enabled
    (II) Loading extension GLX
    (II) LoadModule: "record"
    (II) Loading /usr/lib/xorg/modules/extensions//librecord.so
    (II) Module record: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.13.0
    Module class: X.Org Server Extension
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension RECORD
    (II) LoadModule: "dri"
    (II) Loading /usr/lib/xorg/modules/extensions//libdri.so
    (II) Module dri: vendor="X.Org Foundation"
    compiled for 1.4.2, module version = 1.0.0
    ABI class: X.Org Server Extension, version 0.3
    (II) Loading extension XFree86-DRI
    (II) LoadModule: "sis"
    (II) Loading /usr/lib/xorg/modules/drivers//sis_drv.so
    (II) Module sis: vendor="X.Org Foundation"
    compiled for 1.4.0.90, module version = 0.9.4
    Module class: X.Org Video Driver
    ABI class: X.Org Video Driver, version 2.0
    (II) LoadModule: "mouse"
    (II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
    Backtrace:
    And here's what the server writes out:
    Backtrace:
    Inconsistency detected by ld.so: dl-open.c: 260: dl_open_worker: \
    Assertion `_dl_debug_initialize (0, args->nsid)->r_state == RT_CONSISTENT' failed!
    waiting for X server to begin accepting connections
    giving up.
    xinit: Connection reset by peer (errno 104): unable to connect to X server
    xinit: No such process (errno 3): Server error.
    Any ideas? Because I have no idea, what is happening.
    Edit (08.08.2008): All right, don't bother answering this question anymore. The problem is no longer important. This topic can be closed, since it won't be solved.
    (I think it was caused by some error during copying files while updating my system.)
    Last edited by TPJ (2008-08-08 08:42:13)

    sand_man wrote:Is /tmp full?
    Damn you're right. The pacman cache filled the disk...
    Problem solved - thanks!
    Only question left is:What are the correct permissions for /tmp since I'd like to set them back to default.
    Last edited by Isildur (2009-08-16 14:22:23)

  • Won't connect after updating to version 36, unless open up another browser first

    This has happened to me both times today when i powered up my laptop. I noticed that I
    was upgraded to the latest version of Firefox (36) today, but when i open the browser, I
    get the 'unable to connect' message. I try a few sites and they all give me the same message.
    Weirdly one of system tray icons i hvae (weather channel) connected fine and was displaying
    temperature already. Weirder yet, when i bring up IE, i can connect, and after IE is up, I can
    then bring up Firefox and have no more problems until i shut down...
    Something weird is going on...any thoughts on what the update changed?

    hi flyerphann, normally such issues are caused by a firewall/security software which doesn't recognize & therefore blocks new firefox versions. please remove all program rules for firefox from your firewall and let it detect the new version of the browser again.
    [[Fix problems connecting to websites after updating Firefox]]

  • I4 push mail doesn't work after update

    My I4 push mail doesn't work after iOS 5 update. I have a mobileme acct and the settings show mail set up for push. Any thoughts?

    Hello amishnik,
    Thank you for your question regarding email on your BlackBerry PlayBook tablet.
    Have you restarted the device and verified that the device is still connected to Wi-Fi? Are you able to browse the internet? If not, try this and let us know the results including any error messages.
    Cheers,
    -FB
    Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.
    Click "Accept as a Solution" for posts that have solved your issue(s)!

  • Touch id doesn't work after update ios 7.1 APPLE PLEASE HELP!!!

    Touch id scanner dead after update 7.1. Tried remove fingerprints but cannot add new fingerprint because the touch id scanner DEAD. Tried rebooting the device and touch id scanner still doesn't work. For somehow the scanner works when the iphone is charging even it works slower than before the ios 7.1 update. APPLE PLEASE FIX THIS!!!
    FYI : I am not going to try backup and restore my 5s, for the last time i bought this 5s i already tried for 2DAYS and cannot restore my old iphone 5 data to my new 5s!! I give up and lost all my DATA! Cannot find any answer from apple support. REALLY DISSAPOINTED WITH APPLE!

    https://discussions.apple.com/message/25162081#25162081

  • Home sharing doesn't work after updating itunes to 10.6.40

    Hi
    Just update my itunes to 10.6.40 and ipad1/iphone4 to 5.1.
    The home sharing doesn't appear after enable it and both remote app (ipad and iphone) don't work!
    Now, my ipad doesn't sync thru wifi and my iphone 4 sync thru wifi even when not charging.
    Please help
    Regards
    Pedro Silva

    Thanks! I didn't realise there was a specific forum for Home Sharing... found it now and will repost there.

  • Apps doesn't open after update to ios 5

    Please help. After updating to iOS5, my ipad 2 will not launch any apps other than the Apple's orginal apps such as iMessage, iCalendar, mail.. etc. What should I do? Thanks.

    If it's happening on all the apps that you've downloaded from the App Store, but not the Apple built-in ones, then try downloading any free app from the store (as that appears to reset something) and then re-try them - the free app can then be deleted.
    Otherwise have you tried closing all apps completely and then seeing if they work when you re-open them ? From the home screen (i.e. not with any app 'open' on-screen) double-click the home button to bring up the taskbar, then press and hold any of the apps on the taskbar for a couple of seconds or so until they start shaking, then press the '-' in the top left of each app to close them, and touch any part of the screen above the taskbar so as to stop the shaking and close the taskbar.
    If that doesn't work then you could try a reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.

Maybe you are looking for