Wi-fi full coverage prictices and recommendations
Hello All,
can someone provide "best practises" and recommendations for wi-fi full coverage in a warehouse and in office.
This is widespread topic nowadays, isn't it?
For warehouse access points may be installed on pillar but behind and close to the pillar with omnidirectional antennas
there will be no signal. Which antennas suit the best for this case?
Get a wireless site survey done. That's THE best practice.
Similar Messages
-
my house is 2 story and requires a wireless access point upstairs for full coverage, is this compatible with other wap devices?
If the main router on your network is also an Apple product, it might be possible to connect the Time Capsule using wireless only. Please post back to provide the model number of the product that you have in order to check for compatibility.
If your main router is not an Apple product, the Time Capsule will need to be connected back to your main router using a wired Ethernet connection in order to function as a wireless access point on your network.
While an Ethernet cable connection is ideal, a pair of Ethernet powerline adapters might be able to send an "Ethernet" signal over the existing AC powerlines in your home. There are more details to go over with these types of adapters if you want to consider them, because they tend to be "iffy", and not predictable in all situations. -
My phone was working at 8:00 AM this morning and now it only gets 1x coverage and I cannot make any calls or texts and I have no internet service. Everyone else has full coverage that has Verizon and I want to know why. I already reset my network settings.
Why would you think a problem with Verizon when you have already stated everyone else with Verizon has full coverage?
Have you updated your iPhone to the new iOS 8/8.0.1/8.0.2??? Apple has been having problems with cellular connectivity with the new OS and is currently working on the 3rd update to iOS 8 in less than a month. Hopefully this will be pushed out soon and will fix many of the problems people have been having. -
Final Cut Studio 2: Requirements and Recommendations
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4bSORRY, BUT MY PREVIOUS POSTING DIDN'T HAVE THE FULL LIST OF HARDWARE CONTENTS of my Power Mac G5.
Hello Final Cut Studio 2 Experts,
I'm considering purchasing Final Cut Studi 2, and to make sure that I'll benefit from the full range of specific application (FCS/motion/color...) and I'd like to ask few questions (5 main points) regarding requirements and recommendations. So, please be prepared for much reading as I am not an expert on the matter. I like to know if my computer accepts any further hardware parts highly recommended and if I can purchase and install them myself. And yes, you should also know that I intend to use a Panasonic multi-format (HD/SD) camera for capturing and exporting videos.
N.B. Please note that the full list of my Hardware contents appear at the bottom of this text.
THANKS IN ADVANCE for your expert advise!
So, here we go:
Application-Specific Requirements
Final Cut Studio
Capturing HD resolution video using the ProRes 422 format requires a Mac Pro with an Intel Xeon processor or a G5 Quad computer and a qualified third-party capture card.
1) Do I need an Intel Xeon processor? If yes, can I purchase and install the component by myself (like RAM)?
Motion
The standard graphics card in any Mac Pro, MacBook Pro, iMac with Intel Core Duo, Power Mac G5, or iMac G5; 1.25GHz or faster PowerBook G4; or 1.25GHz or faster flat-panel iMac:
ATI Radeon 9800, 9700 Pro, 9600 XT, or 9600 Pro
ATI Mobility Radeon 9700 or 9600
NVIDIA GeForce 7600 GT, 7300 GT, 6600, 6600 LE, FX Go5200, or FX 5200 Ultra
For 16- and 32-bit rendering: a graphics card with at least 128MB of VRAM
2) Do I need one of the ATI Radeon 9800, 9700... or ATI Mobility Radeon? Why does my Hardware contents say ATI Radeon 9600, and not ATI Mobility Radeon 9600, is there a difference?
Color
The standard graphics card in any Mac Pro, 17-inch MacBook Pro, 24-inch iMac with Intel Core Duo, or 2.5GHz or faster Power Mac G5 Quad:
ATI Mobility Radeon X1600
ATI Radeon X1600
NVIDIA GeForce 7800 GT, 7600 GT, 7300 GT, 6600, or Quadro FX 4500
A display with 1680-by-1050 resolution or higher
A three-button mouse for full functionality
3) Do I need and ATI Mobility Radeon X1600 or ATI Radeon X1600?
DVD Studio Pro
For playback of DVD Studio Pro 4-authored HD DVDs: a Macintosh computer with a PowerPC G5 or Intel Core Duo processor
For writing finished projects to disc: an Apple SuperDrive or other DVD recorder
For writing finished projects to a double-layer disc: a double-layer-compatible recorder and double-layer media
For transporting HD projects to a replicator: an external drive or Internet transfer of the project’s disk image
For transporting SD projects that contain copy-protection or dual-layer features to a replicator: a DLT drive, external drive, or Internet transfer of the project’s disk image
4) Do I have an Intel Core Duo processor? Do I need an Apple SuperDrive?
What is a "replicator"?
Application-Specific Recommendations
Motion
One of the following graphics cards is highly recommended:
ATI Radeon X1900 XT, X850 XT, X800 XT, or X1600
NVIDIA GeForce 7800 GT, 6800 Ultra DDL, 6800 GT DDL, or Quadro FX 4500
For 32-bit rendering: a graphics card with 256MB of VRAM or more
Color
The following graphics card is highly recommended:
ATI Radeon X1900 XT
Dual displays with 1920-by-1200 or higher resolution
5) Do I have one of the highly recommended cards ATI Radeon X1900 XT etc...? How do I get it and can I install it myself?
My Power Mac G5 HARDWARE CONTENTS:
Hardware Overview:
Machine Name: Power Mac G5
Machine Model: PowerMac7,3
CPU Type: PowerPC G5 (3.0)
Number Of CPUs: 2
CPU Speed: 2.3 GHz
L2 Cache (per CPU): 512 KB
Memory: 4.5 GB
Bus Speed: 1.15 GHz
Boot ROM Version: 5.2.4f1
Serial Number: G85167AGRU3
ATA Bus:
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
SONY DVD RW DW-Q28A:
Model: SONY DVD RW DW-Q28A
Revision: KAS7
Serial Number:
Detachable Drive: No
Protocol: ATAPI
Unit Number: 0
Socket Type: Internal
Built In Sound Card:
Devices:
Texas Instruments TAS3004:
Inputs and Outputs:
Line Level Input:
Controls: Left, Right
Playthrough: No
PluginID: TAS
Headphones:
Controls: Mute, Left, Right
PluginID: TAS
Internal Speakers:
Controls: Mute, Master
PluginID: TAS
Line Level Output:
Controls: Mute, Left, Right
PluginID: TAS
Crystal Semiconductor CS84xx:
Inputs and Outputs:
S/PDIF Digital Input:
Controls: Mute
Playthrough: No
PluginID: Topaz
S/PDIF Digital Output:
Controls: Mute
PluginID: Topaz
Formats:
PCM 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
PCM 24:
Bit Depth: 24
Bit Width: 32
Channels: 2
Mixable: Yes
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
AC3 16:
Bit Depth: 16
Bit Width: 16
Channels: 2
Mixable: No
Sample Rates: 32 KHz, 44.1 KHz, 48 KHz
Bluetooth: No Information Found.
SONY DVD RW DW-Q28A:
Firmware Revision: KAS7
Interconnect: ATAPI
Burn Support: Yes (Apple Shipped/Supported)
Cache: 2048 KB
Reads DVD: Yes
CD-Write: -R, -RW
DVD-Write: -R, -RW, +R, +RW, +R DL
Burn Underrun Protection CD: Yes
Burn Underrun Protection DVD: Yes
Write Strategies: CD-TAO, CD-SAO, CD-Raw, DVD-DAO
Media: No
Fibre Channel: No Information Found.
FireWire Bus:
Maximum Speed: Up to 800 Mb/sec
ATI Radeon 9600:
Chipset Model: ATY,RV351
Type: Display
Bus: AGP
Slot: SLOT-1
VRAM (Total): 128 MB
Vendor: ATI (0x1002)
Device ID: 0x4150
Revision ID: 0x0000
ROM Revision: 113-A58504-113
Displays:
Cinema HD Display:
Display Type: LCD
Resolution: 1920 x 1200
Depth: 32-bit Color
Core Image: Supported
Main Display: Yes
Mirror: Off
Online: Yes
Quartz Extreme: Supported
Rotation: Supported
Display:
Status: No display connected
DIMM0/J11:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM1/J12:
Size: 256 MB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM2/J13:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM3/J14:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM4/J41:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM5/J42:
Size: 1 GB
Type: DDR SDRAM
Speed: PC3200U-30330
Status: OK
DIMM6/J43:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
DIMM7/J44:
Size: Empty
Type: Empty
Speed: Empty
Status: Empty
PC Cards: No Information Found.
PCI Cards: No Information Found.
Parallel SCSI: No Information Found.
System Power Settings:
AC Power:
System Sleep Timer (Minutes): 0
Disk Sleep Timer (Minutes): 0
Display Sleep Timer (Minutes): 0
Dynamic Power Step: No
Reduce Processor Speed: No
Sleep On Power Button: Yes
Automatic Restart On Power Loss: No
Wake On AC Change: No
Wake On LAN: No
Wake On Modem Ring: No
Adobe PDF 7.0:
Status: Idle
Print Server: Local
Driver Version: 10.4
Default: No
URI: pdf700://distiller/
PPD: Adobe PDF 3016.102
PPD File Version: 1.0
PostScript Version: (3016.102) 0
hp LaserJet 1012:
Status: Idle
Print Server: Local
Driver Version: 1.4.5
Default: Yes
URI: usb://Hewlett-Packard/hp LaserJet 1012?serial=00CNFB638356
PPD: hp LaserJet 1012
PPD File Version: 1.0
PostScript Version: (3011.104) 0
Serial-ATA Bus:
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Maxtor 6B250S0:
Capacity: 233.76 GB
Model: Maxtor 6B250S0
Revision: BANC1E50
Serial Number: B61QB0RH
Removable Media: No
Detachable Drive: No
BSD Name: disk1
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "A (upper)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Macintosh HD:
Capacity: 233.64 GB
Available: 50.02 GB
Writable: Yes
File System: Journaled HFS+
BSD Name: disk1s3
Mount Point: /
Serial-ATA Bus:
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
Maxtor 7L300S0:
Capacity: 279.48 GB
Model: Maxtor 7L300S0
Revision: BANC1E00
Serial Number: L602X73H
Removable Media: No
Detachable Drive: No
BSD Name: disk0
Protocol: ata
Unit Number: 0
Socket Type: Serial-ATA
Bay Name: "B (lower)"
OS9 Drivers: No
S.M.A.R.T. status: Verified
Volumes:
Primo Volume:
Capacity: 279.36 GB
Available: 154.23 GB
Writable: Yes
File System: HFS+
BSD Name: disk0s3
Mount Point: /Volumes/Primo Volume
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x2b
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Hub in Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x1003
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Optical USB Mouse:
Version: 3.40
Bus Power (mA): 100
Speed: Up to 1.5 Mb/sec
Manufacturer: Logitech
Product ID: 0x0307
Vendor ID: 0x05ac (Apple Computer, Inc.)
Apple Pro Keyboard:
Version: 4.10
Bus Power (mA): 250
Speed: Up to 12 Mb/sec
Manufacturer: Mitsumi Electric
Product ID: 0x020b
Vendor ID: 0x05ac (Apple Computer, Inc.)
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0035
PCI Revision ID: 0x0043
PCI Vendor ID: 0x1033
Bus Number: 0x0b
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
hp LaserJet 1012:
Version: 1.00
Bus Power (mA): 500
Speed: Up to 12 Mb/sec
Manufacturer: Hewlett-Packard
Product ID: 0x0d17
Serial Number: 00CNFB638356
Vendor ID: 0x03f0
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x09
USB Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBOHCI
PCI Device ID: 0x0040
PCI Revision ID: 0x0001
PCI Vendor ID: 0x106b
Bus Number: 0x08
USB High-Speed Bus:
Host Controller Location: Built In USB
Host Controller Driver: AppleUSBEHCI
PCI Device ID: 0x00e0
PCI Revision ID: 0x0004
PCI Vendor ID: 0x1033
Bus Number: 0x4b
Message was edited by: Rinaldo -
Macbook pro redina display keeps on telling me that the hard drive is full from Videos, and yet their is no videos, what can i do?
If the Storage display seems to be inaccurate, try rebuilding the Spotlight index.
Empty the Trash if you haven't already done so. If you use iPhoto, empty its internal Trash first:
iPhoto ▹ Empty Trash
Do the same in other applications, such as Aperture, that have an internal Trash feature. Then restart the computer. That will temporarily free up some space.
According to Apple documentation, you need at least 9 GB of available space on the startup volume (as shown in the Finder Info window) for normal operation. You also need enough space left over to allow for growth of the data. There is little or no performance advantage to having more available space than the minimum Apple recommends. Available storage space that you'll never use is wasted space.
When Time Machine backs up a portable Mac, some of the free space will be used to make local snapshots, which are backup copies of recently deleted files. The space occupied by local snapshots is reported as available by the Finder, and should be considered as such. In the Storage display of System Information, local snapshots are shown as Backups. The snapshots are automatically deleted when they expire or when free space falls below a certain level. You ordinarily don't need to, and should not, delete local snapshots yourself. If you followed bad advice to disable local snapshots by running a shell command, you may have ended up with a lot of data in the Other category. Ask for instructions in that case.
See this support article for some simple ways to free up storage space.
You can more effectively use a tool such as OmniDiskSweeper (ODS) or GrandPerspective (GP) to explore the volume and find out what's taking up the space. You can also delete files with it, but don't do that unless you're sure that you know what you're deleting and that all data is safely backed up. That means you have multiple backups, not just one. Note that ODS only works with OS X 10.8 or later. If you're running an older OS version, use GP.
Deleting files inside an iPhoto or Aperture library will corrupt the library. Any changes to a photo library must be made from within the application that created it. The same goes for Mail files.
Proceed further only if the problem isn't solved by the above steps.
ODS or GP can't see the whole filesystem when you run it just by double-clicking; it only sees files that you have permission to read. To see everything, you have to run it as root.
Back up all data now.
If you have more than one user account, make sure you're logged in as an administrator. The administrator account is the one that was created automatically when you first set up the computer.
Install the app you downloaded in the Applications folder as usual. Quit it if it's running.
Triple-click anywhere in the corresponding line of text below on this page to select it, then copy the selected text to the Clipboard by pressing the key combination command-C:
sudo /Applications/OmniDiskSweeper.app/Contents/MacOS/OmniDiskSweeper
sudo /Applications/GrandPerspective.app/Contents/MacOS/GrandPerspective
Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Paste into the Terminal window by pressing command-V. You'll be prompted for your login password, which won't be displayed when you type it. Type carefully and then press return. You may get a one-time warning to be careful. If you see a message that your username "is not in the sudoers file," then you're not logged in as an administrator. Ignore any other messages that appear in the Terminal window.
The application window will open, eventually showing all files in all folders, sorted by size. It may take a few minutes for the app to finish scanning.
I don't recommend that you make a habit of doing this. Don't delete anything as root. If something needs to be deleted, make sure you know what it is and how it got there, and then delete it by other, safer, means. When in doubt, leave it alone or ask for guidance.
When you're done with the app, quit it and also quit Terminal. -
Hello,
Is it possible the current Mac Mini 2.7 Ghz i7 with two full-resolution displays and Thunderbolt operate?
Thanxs for your answers.
GeraldOn Second thoughts...
I don't really know how well Logic Express 7 performs on the Mac Mini because I have not yet had the chance to experience the two together. Don't let that put you off the idea though! From my understanding of the system requirements printed on the Logic Express homepage, it states that a G4 or faster system is required, however Apple personally recommend a Dual G4 or G5 is recommended alongside a minimum of 512MB of Ram. This Does mean that Logic Express will run on the Mac Mini but you will most probably find it lags when moving samples in real time and rendering them onto your hard drive. If you really want to enjoy making "serious" music on the Mac then you really need to be looking at the iMac G5 or the iMac Core Duo (Intel) purely for your tempers sake. As for an Intel Mac Mini, there is no indication as to when we will be seeing one on the market and therefore you may find yourself on the fence between keeping your fixed budget and holding on a little or jumping in and getting on the right road to a digital musical life - mac style.
Maybe this will inspire your decision:
http://www.engadget.com/2005/02/08/how-to-turn-your-mac-mini-into-a-low-cost-rec ording-studio/
Hope this helps
-Pos -
Recent update 3.01 to 3.1.2 - Full Coverage to No service, back to full
I'm not sure why I did it, but I usually go by the rule of thumb if a device you are operating has no problems, there should be no need to update it. Well, I did not follow that rule, and recently updated to 3.1.2.
The problem I'm experiencing is the coverage will have all 5 bars, and drop to none, then I get no service, and about 5-7 seconds later it will jump back to full coverage, with 5 bars. This is sporadic, but occurs several times a day.
I've googled the issue, and have tried different "Supposed" resolutions, such as: Resetting network, and disabling 3G. I have not completely reset the device, as that is the last thing I would like to do.
Is this a major issue with others or just me. The crazy thing is, I've had virtually no dropped calls...only this issue!!I just bought a new fone yesterday and did a software upgrade. Network indicator shows full, but not able to make calls or send smses.. called up de service provider (Etisalat) here.. attempted a few network resets and soft resets.. but all in vain.. works for sometime and den again back to non-working condition.. tried changing the SIM.. no advantage..
planning of a downgrade to de old version.. at least i cud use it as a fone.. -
Hello,
I don´t understand very well the difference between coverage area and perimeter in the WCS Map Editor.
I only want that APs coverage offer service inside the building and then avoid that a person can connects when he is outside the building.
To do it, What I have to do? I have to draw a coverage area inside the building or perimeter, or both?
Regards,Hi, thx for your reply. I played with the Planner, defining one large Perimeter and 4 Coverage Areas inside, excluding one Inner Area. The Planner dont worry about that, he plans for the full Area. Regards, Michael
-
We have a 2009 MBP, 2010 MBP, 2011 MBA, an IPAD 2, and several ipods. Currently, my 2009 MBP is the main computer, holding all the music and pictures. This has used up the majority of the available storage and definitely slows it down some. I do back up the full computer to a backup drive and also remove the large movie files to another external drive. I'm thinking about getting a new iMac to use as the main computer. Has anyone done this? What is your experience and recommendations?
I look forward to all responses.
Thanks,
BradThanks for your response. I look forward to hopefully learning something new here.
A good share of my music was added via my CDs, but now everything is added via itunes and occasionally amazon. Almost all my pictures and video are added through my cameras via iphoto although I have added some with the 'add image to iphoto library' function also. -
Please explain me, how to remove an usb stick or memory chip? With experiences only in pc:s, I do not find on my first apple e.g. MacBook Air a solution. Until now I have succeeded to destroy one chip full of photos and - there's no life more in the port...
Someone told me just to remove the chip in clicking it to the trash can and voilá - it would be done. But as I did so, on the screen appeared a text which let me know, that that way had been the wrong one...
I should have clicked Finder plus something.... which I do not now remember but which was then not found behind the Finder.
So please would someone be so kind and tell me, where I can find explanations for the most simple functions. The manual I got does not include a clue.
Thank you!First make sure that no application is using or has open any files on the disk. Then:
Click and drag the disk icon on the desktop to the trash. Wait for the system to recognize the action, and the icon should disappear from the desktop. It is then safe to remove the device.
Alternatively, you can secondary click on the disk icon, and then primary click "Eject (name of disk)". Wait for the icon to disappear off the desktop, and then it is safe to remove the drive.
Here is a detailed help document on the subject.
http://docs.info.apple.com/article.html?path=Mac/10.7/en/mchlp1056.html -
SQL Query for full paid invoices and payed out credit notes
Hi alltogether,
I have some problems with a sql query.
I want to export all closed (full paid) invoices and credit notes in a table with the paid date.
The problem is that I have several internal reconciliations for one invoice or credit note.
So with my current query I get all these dates in the result but only for invoices, not for credit notes.
I only need the last internal reconciliation date as payment date for all invoices and credit notes where the open amount is 0.
In SAP B1 the finance team has service invoices and credit notes imported out of an ERP system.
These documents are marked with an 'Y" in the coloumn "U_I_Imported" in the table "OINV" or "ORIN".
SELECT
OINV.DocTotal - OINV.PaidToDate as Offen, OINV.NumAtCard, OINV.U_I_Imported, ORCT.DocDate as 'Zahlungsdatum'
SELECT
OINV.DocTotal - OINV.PaidToDate as Offen, OINV.NumAtCard, OINV.U_I_Imported, ORCT.DocDate as 'Zahlungsdatum'
FROM
OJDT inner join
ORCT on OJDT.BaseRef = ORCT.DocNum inner join
RCT2 on ORCT.DocNum = RCT2.DocNum inner join
OINV on RCT2.BaseAbs = OINV.DocEntry
where
OINV.DocTotal - OINV.PaidToDate = 0 and OINV.U_I_Imported = 'Y'
group by
OINV.NumatCard, OINV.DocTotal - OINV.PaidToDate, OINV.U_I_Imported, ORCT.DocDate
order by
ORCT.DocDate
I hope you can help me.
Kind regards,
MaxThe solution for my problem:
select
OINV.DocTotal - OINV.PaidToDate as 'Offen', OINV.CardCode as 'Kundennummer', OINV.NumAtCard as 'DIAMOD Rechnungsnummer', OINV.DocNum as 'Dokumentennummer', max(ORCT.DocDate) as 'Zahlungsdatum', case when ORCT.DocCurr = (select MainCurncy from OADM) then RCT2.DcntSum else RCT2.DcntSumFC end as 'SkontoRechnungswährung',
RCT2.DcntSum as 'SkontoFirmenwährung'
from
JDT1 inner join
OJDT on JDT1.TransId = OJDT.TransId inner join
ORCT on OJDT.BaseRef = ORCT.DocNum inner join
RCT2 on ORCT.DocNum = RCT2.DocNum inner join
OINV on RCT2.BaseAbs = OINV.DocEntry
where
JDT1.TransType in ('24') and
OINV.U_I_Imported = 'Y' and
OINV.DocTotal - OINV.PaidToDate = 0
group by
OINV.NumAtCard, OINV.DocNum, OINV.CardCode, OINV.DocTotal - OINV.PaidToDate, ORCT.DocCurr, RCT2.DcntSum, RCT2.DcntSumFC
union all
select
OINV.DocTotal - OINV.PaidToDate as Offen, OINV.CardCode as 'Kundennummer', OINV.NumAtCard as 'DIAMOD Rechnungsnummer', OINV.DocNum as 'Dokumentennummer', max(OITR.ReconDate) as 'Zahlungsdatum',
0.0 as 'SkontoRechnungswährung',
0.0 as 'SkontoFirmenwährung'
from
OITR inner join
ITR1 on OITR.ReconNum = ITR1.ReconNum inner join
OINV on ITR1.SrcObjAbs = OINV.DocEntry
where
OINV.DocTotal - OINV.PaidToDate = 0 and ITR1.SrcObjTyp = 13 and OINV.U_I_Imported = 'Y'
group by
OINV.NumatCard, OINV.DocNum, OINV.CardCode, OINV.DocTotal - OINV.PaidToDate
union all
select
ORIN.DocTotal - ORIN.PaidToDate as Offen, ORIN.CardCode as 'Kundennummer', ORIN.NumAtCard as 'DIAMOD Rechnungsnummer', ORIN.DocNum as 'Dokumentennummer', max(OITR.ReconDate) as 'Zahlungsdatum',
0.0 as 'SkontoRechnungswährung',
0.0 as 'SkontoFirmenwährung'
from
OITR inner join
ITR1 on OITR.ReconNum = ITR1.ReconNum inner join
ORIN on ITR1.SrcObjAbs = ORIN.DocEntry
where
ORIN.DocTotal - ORIN.PaidToDate = 0 and ITR1.SrcObjTyp = 14 and ORIN.U_I_Imported = 'Y'
group by
ORIN.NumatCard, ORIN.DocNum, ORIN.CardCode, ORIN.DocTotal - ORIN.PaidToDate -
I have a MacBook Pro 5,4 running OSX 10.6.8 and Safari 5.1.10. A website i like has a known bug with 5.1.10 and recommends I install a newer version of Safari or use Firefox or Chrome. Just looking for advice on the best approach. Thanks!
Unfortunately, Safari cannot be updated past 5.1.10 on a Mac running v10.6.8.
So, the options are to upgrade to a newer OS X or use Firefox or Chrome.
Be aware, Apple no longer support Snow Leopard v10.6 > www.ibtimes.com/apple-kills-snow-leopard-os-x-106-no-longer-receives-security-u pdates-1558393
See if your Mac can run v10.9 Mavericks > OS X Mavericks: System Requirements
If so, you can download and install Mavericks for free from the App Store.
Read prior to upgrading > Upgrading to 10.7 and above, don't forget Rosetta! | Apple Support Communities -
Full screen preview and slideshow are blurry / fuzzy
Hi folks-
I just upgraded from CS2 to CS4, in part to improve efficiency of selecting photos - I wanted the zoom and loupe features. Unfortunately a very basic function has been compromised and I'm hoping there's a solution: In both full-screen preview and slideshow the full-screen image is notably blurry. This is a problem for two reasons: 1. I can't judge pictures accurately by just flipping through them in full-screen mode (without zooming to 100% to see if they are well-focused). 2. I can't use Slideshow for, well, slideshows. I've had to resort to keeping another app (like Windows Picture Viewer) open just to be able to quickly flip through and evaluate images full-screen or to show slideshows.
I've tried setting all the options related to image quality (they mostly have to do with caching thumbnails and speeding 100% viewing); I've tried purging the cache files. Nothing helps.
Any ideas? Thanks!It seems to me that there is something wrong with it.
I am trying Bridge CS4 as a viewer for my JPEG files.
I also noticed that the previews were fuzzy. I activated the high-quality previews as well as the option to generate the previews at screen size.
Here's what I noticed. I went to check out a specific photo that is quite sharp with a number of straight lines, angles, details, where it's very easy to detect a lack of sharpness. That photo immediately looked fuzzy to me, which didn't jive with my memory of it. I quickly opened it in other viewers, which displayed it as intended with all the expected sharpness.
So, I went through the settings to see where the problem could be and I immediately thought of checking the box to get software previews instead of hardware, restarted the app, purged the cache, tried again. There my photo had recovered its sharpness, or at least most of it. I thought I found the culprit, but not quite.
I went to browse other photos and found one in particular with a lot of fine detail (hair) and that photo also didn't display all the sharpness that it should have (I was still using software mode). The difference was very slight and to make sure of it it required A/B comparison between Bridge and PS, but there was a difference.
Now I tried the opposite. I went back to hardware rendering mode, restarted, purged the cache, tried again. That second photo looked alright in preview, but the previous photo looked fuzzy again.
So, it doesn't work the same way for each photo...
What's the main difference between the first photo, obviously fuzzy in hardware mode, and the second one, alright in hardware mode but slightly fuzzier in software? The ratio. The first one is a vertical photo, the second one is horizontal (close to square).
I quickly checked other vertical photos and they showed the same behavior...
Now staying in hardware mode, I noticed something else. When I preview the vertical photo and click on it, or double click, it quickly jumps, switching between 2 versions of the photo: the one displayed originally (fuzzy) and another one, with a very slightly different size, which is sharp. During that manipulation it also briefly displays "100%" at the top of the screen. It doesn't stick when you click and immediately switches back, so it looks like a glitch.
Now in software mode, I tried the same, this time you can click once on the photo (which is originally displayed *almost* sharp). When you click once, it displays "100%" but also displays a very slightly smaller version that is clearly fuzzy. Clicking again goes back to the other, less fuzzy one, but doesn't display "100%" this time.
Doing the same test on horizontal photos shows no change that I can see.
So, it seems to me that in the preview mode, Bridge has trouble displaying some photos (vertical ones?) in their actual resolution (100%)
and since there is a slight resizing going on, it brings fuzziness. This doesn't explain the very slight fuzziness seen on horizontal photos in software mode.
Now I'll mention, for those still awake, that I saw no fuzziness on the same vertical photos when I go to Review Mode with *hardware* rendering. Photos there are sharp. Now if I go to the review mode with software rendering enabled, vertical photos are not 100% sharp (akin to the small difference I mentioned earlier while in software mode), while they are sharper in preview.
To sum up, it seems that the only configuration that gives me consistently 100% sharp (=as they were meant to be after post-processing) photos no matter what their orientation, is when I stay in hardware rendering mode and use the Review Mode, instead of preview.
This all really smells like a bug.
For info, I am using Windows 7 and an ATI HD4850 card, and this only about processed JPEG files, not RAW files.
Perhaps the preview is really meant as a quick preview and not a tool to view final photos at 100% accuracy... -
Problem Installing HP Officejet J4580 Full Feature Software and Driver
Hallo !
I recently installed a new 2T harddrive and performed a clean install of Windows 7 Home Premium 64-bit on my e-Machine Model ET-1331-g-05w. The clean install of Windows 7, installation of the e-Machine drivers, und 325+ Microsoft Updates was successful. The System is running fine and protected by Kaspersky 2015 Internet Security. Please note this WAS NOT an OS upgrade from Vista to Win7 - just a clean-install of the original Win7 64-bit OS.
After creating an ISO and Full Backup(nothing else has been installed at this point) I wan't to re-install my HP Officejet J4580 All-in-one. I have the original CD but I know that it can only be used on an XP or Vista OS - so I went to the www3.hp.Offical HP Drivers and Support downloaded the Product Installation Software for:
HP Officejet Full Feature Software and Driver
File: OJJ4500_FULL_13.exe
Released: 2014-09-03
Version: 13.0.0
My printer wasn't connected via USB - the install ran for about 30 and when I asked to connect the USB cable the splash screen told me it was finishing the install but then it failed with a message unable to located J4580 Drivers. The install that place the Solution Center, HP Document Manager, and HP Photosmart ICON's on my Desktop - when I opened the Solution Center - it said that it couldn't communicate to the printer. The printer and USB cable work fine on my Vista Desktop, my Vista Business Notbook. and my IBM X40 running WP SP3.
I've also tried running:
1) HP Update Software Utility - hpsetup.exe
2) Hp Print and Scan Doctor - HPPSdr.exe
3) HP Officejet Software and Driver Removal Utility - OJJ4500_Scrubber_13.exe
but the 2nd attempt to re-install failed too.
I then reloaded my clean ISO - and tried the Product Installation Software for the Basic Drivers
HP Officejet Basic Print and Scan Driver
File: OJJ4500_Basic_13.exe
Released: 2014-09-03
Version: 13.0.0
The Basic Drivers worked fine -but I need the Full Driver. I double checked and the WIN 7 64-bit is shown as a supported OS for the Full Driver - any suggestions on how to proceed? I'm wondering if it would be worthwhile installing XP virtual machine and installing the Full Drivers in VM. If I go that route - it creates other issues such as sync'n file from 64-bit to VM, then switching back & forth between VM to process other work, and then the issue of having to scan in VM then sync the folder to 64-bit side.
My System Info is:
System Information report written at: 02/25/15 19:26:49
System Name: DESKTOP-1
[System Summary]
OS Name: Microsoft Windows 7 Home Premium
Version: 6.1.7601 Service Pack 1 Build 7601
OS Manufacturer: Microsoft Corporation
System Name: DESKTOP-1
System Manufacturer: eMachines
System Model: ET1331G
System Type: x64-based PC
Processor: AMD Athlon(tm) II X2 250u Processor, 1600 Mhz, 2 Core(s), 2 Logical Processor(s)
BIOS Version/Date: AMI P01-A2, 12/10/2009
SMBIOS Version: 2.6
Windows Directory: C:\Windows
System Directory: C:\Windows\system32
Boot Device: \Device\HarddiskVolume1
Locale: United States
Hardware Abstraction Layer: Version = "6.1.7601.17514"
User Name: DESKTOP-1\Lisa
Time Zone: Eastern Standard Time
Installed Physical Memory (RAM): 4.00 GB
Total Physical Memory: 3.75 GB
Available Physical Memory: 2.28 GB
Total Virtual Memory: 7.50 GB
Available Virtual Memory: 5.50 GB
Page File Space: 3.75 GB
Page File: C:\pagefile.sys
If you require any additional info - just ask. Thanks for any help/advice!
tjHello @Tom_Ma,
Welcome to the HP Support Forums!
I would like to assist you today with installing your HP Officejet J4580 All-in-One Printer on your Windows 7 computer. Thank you for including all of the troubleshooting steps you have already attempted and your Operating System details in your post. At this point I am going to run you through some additional troubleshooting steps to get this Officejet successfully installed with the Full Feature driver. Please follow the steps below.
Step 1: Uninstall Drivers:
It is important that we have a nice clean slate to work with for troubleshooting. Therefore, I am going to have you uninstall the existing software on your computer.
Click on your Start menu
Select All Programs
Select the HP folder
Select your HP Officejet
Select Uninstall
Follow the onscreen instructions to complete the uninstall of your printer. Once the uninstall is complete, please proceed to the next step.
Step 2: Clear Temp Files:
Click on your Start menu
In the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboard
When the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.
Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.
Close the Temp folder once it is emptied
Right click the Recycling Bin on your desktop and select Empty Recycling Bin
Step 3: Unlock System Administrator Account:
There is the potential that there is something within your User Account that may be blocking the drivers from installing properly. Therefore, I am going to have you unlock the hidden System Administrator Account and install your device under there. Then, when you log back into your normal User Account the printer and all Full Feature software should be installed and functional for you. If all goes well, we we 'hide' the System Administrator Account once troubleshooting is complete.
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:yes and hit enter
Next, close CMD and restart your computer
When your computer comes on log into the new account that should show. It will be called Administrator and will not have a password on it.
If your computer automatically logs into your account after restart than go to your start menu click the arrow beside 'shutdown' and choose 'switch user'. Now log into the Administrator account we just unlocked
Under the Administrator account download and install the drivers: HP Officejet Full Feature Software and Driver
Please follow the onscreen instructions to complete the installation of your printer
Once the installation is complete, please test printing and scanning to confirm that everything is now working properly.
If everything installs fine, log out of this account and back into your normal User Account. All the Software and Drivers for your product should show installed now on your account.
Under your User Account please test printing and scanning again to confirm that everything is still working.
If everything works fine, you will want to Hide the Administrator account.
Step 4: Hide System Administrator Account:
Go to your Start menu and under the 'search programs and files' box type CMD
CMD will populate as a search option above, just right click on it and 'run as administrator'
Once CMD (Command Prompt) opens, type net user administrator /active:no and hit enter
Next, close CMD and restart your computer
Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
X-23
I work on behalf of HP
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping! -
I was using the newest version on OSX 10.7.5 and I was in full screen mode and viewing a photo and it was impossible to exit full screen. This happened at 11:03pm on Friday April 12, 2013. I deleted this from my apps and then deleted iphoto from my purchases in macbook app store the search it the app store and it says it has still been installed. What can I do to fix it?
Well deleting it from your machine was not the way to go.
Deleting it from your Purchases List was definitely not the way to go.
So, I'm not really sure how you're going to reinstall it.
But figure that out and we can try help. Contact App Store support. There's a link on the right hand side of the App Store Window. They should be able to get it back on your purchases list so you can reinstall it.
Maybe you are looking for
-
How do you create table/datagrid programmatically?
I'm ASP.NET developer and I'm writing my first application in JDeveloper & ADF and I'm having problem thinking through the solution. I'm building two JSF pages. First page will display 3 or more input text (text1, text2, text3...) and a ADF read-only
-
Need better reporting on IDOCs to identify actual errors by customer.
hi sapgurus This could be something similar to WE02, but the key fields that are missing are customer, and the actual error message encountered. Right now there is no good way to find out what customers consistantly send us bad information or to do
-
Dbca fails cuz ASM instance startup fails. Unable to start both instances.
Following Jeffrey Hunter guide. Installing 2 node RAC on Oracle EL5 w/ 11g All cluvfy operations successful up to this point of running dbca from node1 (lin1). Errorwhen starting ASM instance on node lin2: PRKS-1009: Failed to start ASM instance "+AS
-
Photoshop CS6 & Lightroom 4 won't open or save files after iMac update 11/2013
My photoshop CS6 has crashed a few times, and it wont open any files nor save them, the same goes for my lightroom 4 & 5. how can this be fixed. I am a mamber of adobe and pay monthly for both my programs. This started after my iMac updated in Novemb
-
Use of Nokia service in my NokiaC2-06
How can get nokia ovi service in my NokiaC2-06 Phone