Wi-Fi greyed out after installing iOS 7

So I installed iOS 7 and after few hours my Wi-Fi turned grey , I got this iPhone 1 month ago , the thing is , the bluetooth is still working so the Wi-Fi chip must be working right ?
Hope I can get help.
Note : I heard there is a blow dryer solution to this , do you think it's safe and if yes , how should I do it ?

The exact same thing happened to my 4s when I upgraded to iOS 6.0, almost right after I updated my WiFi greyed out. I took it to an Apple store and they swore up and down it was a hardware issue and that since my phone was 5 days out of warranty I couldn't get a replacement. I took it home and the next update or two fixed it so it was NOT a hardware issue, it was the iOS. If it suddenly crapped out on you after updating I would bet it's the same thing.
I don't understand why Apple can't field test these a little before mass release, it makes them look sloppy.

Similar Messages

  • After installing ios 7 on iphone 4s the wifi was grey out

    Got a prob after installing ios 7 on iphone 4S, the wifi and b-tooth not working

    See this discussion.
    https://discussions.apple.com/message/23311987#23311987
    It is a known problem with some iPhone 4's.

  • Battery life run out faster after install ios 7

    please help the battery life run out faster after install ios 7 and signal strengh show only 2 bar in my house after install ios 7 too.
    thanks

    Try this out: http://helpios7.com/ios-7-battery-issues/

  • After installing iOS 5, my ipad 2 will not accept my access code and has locked me out

    after installing iOS 5, my ipad 2 will not accept my access code and has locked me out.  Any ideas?

    I don't know if your symptoms are the same as mine, but my problem is the same. Specifically:
    My update seemed to go fine, but I noticed that items in Notification Center were not current or missing, as compared to the iPhone. Also, when iTunes saw the iPad without it being connected by cable, the portion of the iTunes screen that displayed the OS status was blank, and it told me that I had to connect physically to update. When I did, iTunes confirmed that iOS 5 was indeed installed and current.
    With this, I decided to shut down the iPad completely, and restart it. When it came back up, the lock screen had changed. I now get a full keyboard (not just a number pad). When I attempt to enter my 4-digit passcode (and I know I'm entering the correctone), the iPad won't take it. Now it's completely locked and I can't access it.
    The odd thing is the way the screen changed to display a full keyboard on the lock screen. This didn't happen to the iPhone.
    All devices are running the current versions of everything.

  • Wifi greyed out after ios 6.1 update

    My WIFI greyed out after 6.1 update, then my power buttion failed. Basically this update ruined my phone which was working perfectly. Does anyone have any soultions to these problems? Thank you.

    Try the suggestions here to see if they resolve your problem:
    http://support.apple.com/kb/ts1559
    If these don't work you may have a hardware problem. Visit an Apple store for an evaluation or contact Apple Support.

  • All options are greyed out after i Click on Apply Maitenance

    Hi All,
    I am upgrading our EPM system from 11.1.2.1 to 11.1.2.2. I have downloaded all the required files from e-delivery.oracle .com and unzipped them. I selected Apply Maintenance and when i clicked next all the options are greyed out. I am not sure what i have done wrong. I am using the same user ID which was used for installation of hyperion 11.1.2.1.
    Kindly help me out.
    Find the screenshots at my blog.
    http://hyperion-consulting.blogspot.in/2013/01/all-options-are-greyed-out-after-i.html
    Regards,
    AS

    From your screenshot it says that 11.1.2.2 Foundation has been installed when it should say 11.1.2.1 like this - http://2.bp.blogspot.com/-J_9A8U41JS0/T5WXO3JQtxI/AAAAAAAAEj8/0nqcNdo1bFQ/s1600/image022.png
    Also you should only have the option to "Apply maintenance release" like this - http://1.bp.blogspot.com/-1zQHVCODSr0/T5WXNLQN4YI/AAAAAAAAEj4/vNQ_vOT03_8/s1600/image021.png in your screenshot you also have the option to Re-install the release.
    Are you definitely sure the environment has had nothing applied to it.
    Cheers
    John
    http://john-goodwin.blogspot.com/

  • Project pane greys out after adding either HD movie footage or a photo'

    Project pane greys out after adding either HD movie footage or a photo' into iMovie '08. Since using a HD camcorder, quite often, after adding either HD movie footage or a photo', the project pane greys out. I have to exit the project and re-enter to continue viewing the project; this is tiresome. Any thoughts or is this yet another iMovie '08 bug?

    blackcomb greens wrote:
    PS ~ what is the plist?
    every app as a preference list, which can get corrupted.
    quit iM
    look in user/Library/Preferences for a file called com.apple.iMovie(x).plist (x stands for any number) ....
    trash that.
    restart iMovie..
    it doesn't hurt your projects nor does it touch any files.. it just 'resets' an app.. => slapp on backhead.. as I like to call it..
    yes, hardware is nice, as long as you don't dare to handle AVCHD .. that is on Intel Mac only..
    all Folders (Project/Events) is on local harddrive?
    no plug-ins installed (DivX etc)?

  • Sound Problem After Installing iOS 8.1

    Hello, after updating my iPad to iOS8.1 it started making weird noises, kind of the same ones you get while blocking it or getting a notification but with a little of a "robotic" twist. Restoring it seemed to had fix it until I tried to get the 8.1 again. I was just wondering if someone its having the same issue, and if so, whats the solution. Do you think that i'll be treated on the 8.2 version? I had the same problem with my iphone 4 once and couldnt get it sorted out.

    I successfully got my iPhone 6 messages sound by following Timothy Holt directions.
    Thanks Tim.
    Timothy HoltNov 25, 2014 9:11 AM Re: iPhone 6 does not ring or make any sound notifications after installing iOS 8.1
    Re: iPhone 6 does not ring or make any sound notifications after installing iOS 8.1in response to Jane1950
    What you have to do, and this appears to be essential after you update the OS, is to reboot your phone.
    1. Hold down the sleep/wake button and home button simultaneously.
    2. Let go when the Apple logo appears and the iPhone is booting up.

  • TS3274 After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    After installing iOS 7 camera stopped working normally. I can't take pictures with the back camera only the front camera. All was good before the update. Please fix this bug.

    Hi Midnightbrat,
    Welcome to the Support Communities!
    The troubleshooting steps for the camera on the iPad are similar to the iPhone:  I've highlighted the pertinent steps below:
    Hardware troubleshooting
    http://support.apple.com/kb/ts2802
    Camera
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tapping Settings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Third-party cases can interfere with the autofocus/exposure feature and the flash; try removing the case if you have image-quality issues with photos.
    Try turning the iPad off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try switching between the front and the back cameras to verify if the issue persists on both.
    I hope this information helps ....
    Have a great day!
    - Judy

  • After installing iOS 6 battery life is awful on iPhone 4S

    Hello All,
    I just want to share a problem I am having with my iphone 4s. After installing iOS 6.0.1 on it, the battery life is very bad, I could probably say unacceptable, after fully charging it, it would not last even 12 hours before the battery runs out and also i have noticed that the battery or back of the phone gets hot, I would say hotter than before I did the upgrade. I am just wondering if anyone could share some thoughts. I hope Apple comes out with a fix to this issue because I have noticed that a lot of people are having this problem.
    Thank you

    Hmmm...Apple doesn't support downgrading. If true you must have jailbroken your phone rather than properly repair the problem.

  • Photos & Videos clarity reduced after installing iOS 5.1 to iPad2?

    Has anyone noticed that after installing iOS 5.1 and updating your iPad2 with it the clarity in your photos and videos has gone bad?
    Is it due to that iOS 5.1 is primarily optimized for the new iPad's Retina display which is probably creating mess for display clarity of iPad2?
    I haven't seen the new iPad display yet so no chance of comparing the two and then feeling this way. Pls suggest if there is anything which a user need to do to get this fixed or if Apple would like to look into this and fix it by rolling out quick new iOS update.
    Thank you!

    No such problem with my iPad 2 running 5.1.

  • Iphone Camera Went blurry after install ios 7

    Hi Friends,
    My iphone 5 camera went blurry after install ios 7.
    Please help to fix this.
    Thx

    Hello blindupe,
    Thanks for using Apple Support Communities.
    Please follow the troubleshooting steps below to help resolve this issue you're experiencing with your iPhone's camera.
    Camera isn't functioning or has undesired image quality
    If the screen shows a closed lens or black image, force quit the Camera app.
    If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
    Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
    Cases can interfere with the camera and the flash. Try gently cleaning the lens with a clean dry cloth or removing the case if you see image or color-quality issues with photos.
    Try turning iPhone off and then back on.
    Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
    Try to remain steady while focusing:
    Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center.
    Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
    Video: Adjust focus before you begin recording. You can also tap to readjust focus while recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll.
    Note: Video-recording features are not available on original iPhone or iPhone 3G.
    If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Take care,
    Alex H.

  • My batterylif is whorse after installing IOS 501 it loses 3% per hour

    my batterylif is whorse after installing IOS 501 it loses 3% per hour
    It was better with IOS 5.0
    In the eveing my Iphone 4S is fully charged, and no apps running , I even put the Iphone in airplane mode.
    in the morning I have 85% left on the battery
    this was not the case with IOS 5.0
    in the morning 99% left.
    anybody a solution...

    Another update (5.02) is to come out by the end of next week to help with more battery issues.  Hang tight.

  • HT201210 After installing ios 6, my ipod died. please help.

    After installing ios 6, my ipod died. now I get this msg when trying to restore on itunes. ....please help!!
    "the ipod could not be restored. this device isn't eligable for the requested rebuild" it is an ipod touch 4th gen previosly working on ios5.1

    This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
    Update to the latest version of iTunes.
    Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
    Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
    Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
    Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.

  • After installing iOS 6 update my ipod touch 5G doesn't work anymore

    after installing iOS 6 update my ipod touch 5G doesn't work anymore. Can anybody help me? Please!

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

Maybe you are looking for