Wi-Fi has the self-assigned IP address 169.254.82.22 and will not be able to connect to the Internet.

I was watching my ATV3 and it suddenly stopped. When trying to reset things and get my wifi back I get the following message: Wi-Fi has the self-assigned IP address 169.254.82.22 and will not be able to connect to the Internet. I do not have clue to what happened or what to do next. Any help is appreciated.

Power-Cycle the modem.... though it looks like your internet services may have gone down.. or something else upstream has gone kaut.

Similar Messages

  • HT3466 Airport has self assigned IP address 169.254.153.51 and will not be able to connect to the Internet

    Cannot  connect to internet wirelessly because I get the message "AirPort has the self-assigned IP address 169.254.153.51 and will not be able to connect to the Internet."

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • HT1338 my airport is not working getting Wi-Fi has the self-assigned IP address 169.254.5.29 and will not be able to connect to the Internet

    my wi fi wont work giving me this Wi-Fi has the self-assigned IP address 169.254.5.29 and will not be able to connect to the Internet whats up with the airport how do i fix it

    See this discussion.
    Wi-Fi has the self-assigned IP address
    Troubleshooting suggestions.
    Troubleshooting Wi-Fi issues in OS X
    Wireless Connection Problems - Fix
    Wireless Connection Problems - Fix (2)
    Wireless Connection Problems - Fix (3)
    Wireless Connection Problems - Fix (4)
    Wireless Diagnostics - About

  • IPad Wi-Fi has the self-assigned IP address 169.254.210.251 and will not be able to connect to the Internet.  How to fix?

    Mini connects to internet via cable modem fine.
    Want to have ipad connect also but mini Wi-Fi has the self-assigned IP address 169.254.210.251 and will not be able to connect to the Internet.  How to fix?

    Hello:
    I am a long way from a wi-fi expert, but.....
    You need, I think, either a router with wi-fi or an airport (express or extreme).  The iPad needs to connect to to a network.  In my case, I use an airport express and both my iMac and iPad 2 connect to the Internet through the airport device. 
    Barry

  • My Macbook Pro says Wi-Fi has the self-assigned IP address 169.254.74.157 and will not be able to connect to the internet.

    I just got my new Macbook Pro today. When I tried to connect it to my Wi-Fi at home it won't connect. I put in my WEP key correct every time and it keeps saying  "Wi-Fi has the self-assigned IP address 169.254.74.157 and will not be able to connect to the internet" . I connect my iPod touch to this same Wi-Fi all the time plus my other laptop and my phone and it works fine. Please help !! I  use Verizon Fios modem/router.

    Hi, it could be that the Router will not allow you onto the network..Reboot, Modem,Router & computer..
    Find out the native IP address for your Router & reset the network configs''
    Use Keychain Access to Delete all Internet/Router Passwords etc.. Then Roboot..

  • What doesWi-Fi has the self-assigned IP address 169.254.76.213 and will not be able to connect to the Internet

    This is what i get when i try to connect with wi fi at my local liberary: Since i updated to MOUNTAIN LION!!!
    Wi-Fi has the self-assigned IP address 169.254.76.213 and will not be able to connect to the Internet
    Although i can use Snow Leopard at the same Library via a external hard drive and when the same mbp was running Lion it also didn't have any issues connecting at the same library.
    Anyone can help out?????

    Do this the stuff you find at the bottom of this thread:
    https://discussions.apple.com/thread/3864270?tstart=0

  • Wi-Fi has the self-assigned IP address 169.254.235.119 and will not be able to connect to the Internet.

    Wi-Fi has the self-assigned IP address 169.254.235.119 and will not be able to connect to the Internet.

    Reset the TC and make sure it is in the right mode.. ie router if you use a cable pure modem for instance.
    Or if you use a router combined modem.. put the TC in bridge mode.

  • Wi-Fi has self-assigned IP address 169.254.9.151 and will not be able to connect to the Internet

    In trying to setup my AirPort Extreme, it connects to the Internet on ethernetcables to computer but says it is not on WI-FI. I have configured it with all that I casn think of and yet I get, "Wi-Fi has self-assigned IP address 169.254.9.151 and will not be able to connect to the Internet." Can anyone tell me what is wrong?
    I did both a soft reset and a hard reset to no avail. PLEASE someone help!!
    Thanks!

    I would recommend that you do the following as a minimum:
    Power-down the modem, AirPort base station, and computer(s).
    Power-up the modem; wait at least 10-15 minutes to allow it adequate time to initialize.
    Power-up the AirPort base station; wait at least 5-10 minutes. Note: The AirPort's status light may continue to flash amber after it has intialized. That is because, there may be some additional configuration items necessary, like setting up wireless security, before the overall setup is completed to get a green status.
    Power-up your computer(s).
    If the above steps do not solve the problem, start over with step 1 above, but then perform the next steps between steps 1 & 2. above.
    Disconnect the AirPort base station from the Internet broadband modem.
    While all of the devices are powered-down, perform a "factory default" reset on the base station. This will get it back to its "out-of-the-box" configuration and make setting it up much easier, especially if you use the "Assist me" process within the AirPort Utility. (ref: Resetting an AirPort Base Station or Time Capsule)
    After the base station resets, go ahead and power it back down.
    Reconnect the AirPort base station to the Internet broadband modem. For the Extreme and Time Capsule, be sure to connect the cable to the base station's WAN (circle-of-dots) port.
    Continue with step 2 in the first set of steps.
    In this basic configuration, the AirPort base station will broadcast an unsecured wireless network with a Network Name (SSID) of Apple Network NNNNNN. Network clients, connected to the base station either by wire or wireless, should now be able to access the Internet through the ISP's modem. Once Internet connectivity has been verified, you can use the AirPort Utility to configure the base station for wireless security and any other desired options. Please post back your results.

  • Wi-Fi has the self-assigned IP address 169.254.197.32 and will not be able to connect to the Internet.

    Wi-Fi has the self-assigned IP address 169.254.197.32 and will not be able to connect to the Internet. How do you conncect the internet? I'm trying to hook up my wi-fi after It got screwed up somehow. Thanks! Greg

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Self assigned Ip address 169.254.233.194 and will not be able to connect to the internet

    self assigned IP address  and will not be able to connect to the internet. How do I fix this?

    Sorry we have no info.. so description of the problem..
    Are you using wireless? If so on what? Do you have a TC?
    Is this a new TC and failed to setup correctly? Or you have TC or some other wireless router that has been working fine and now failed?
    Plug in by ethernet? Does it now work?
    Reboot the TC.. Does it now work?
    Reboot the whole network.. restart in order.. modem.. router.. TC.. whatever other network equipment.. clients.
    Do some clients work and others fail?
    Press and hold reset on the TC. Redo the setup.. change the TC setup to fixed channels and SMB names.
    We cannot give specific answers to such vague faults.

  • How to fix: AirPort has the self-assigned IP address 169.254.166.253 and will not be able to connect to the Internet.

    Trying again. 
    After using wifi at Hartford Airport, my favorite hotspot showed the above.  How do I fix?

    Clear out all your existing wifi names and passwords.. then start over.
    This has airports involved but not apple ones.
    Wi-Fi: How to troubleshoot Wi-Fi connectivity
    If you check through this it says little more than I have.
    Look at this section.
    Symptom: After restarting or waking from sleep, my computer might not connect to the Internet

  • My Airpot/Time capsule will not will not connect. It states " AirPort has the self addressed IP address 169.254.231.99 and will not connect to the internet??????l

    Cant' get my AirPort to sync up with internet.  I get the message "AirPort has the self addressed IP address 169.254.231.99 and will not connect to the internet. How do I fix?  Thanks.

    What broadband router do you have?
    What model Time Capsule do you have?
    If you changed the system over from another router.. have you rebooted the entire network.. particularly a cable modem.. did you power off for at least 20min..
    Tell us some info and we can help.

  • Wi-Fi has the self-assigned IP address 169.254.21.127

    Hi
    I am having problems with my iPad and it looks like it's coming from my iMac because in the Network it says "Wi-Fi has the self-assigned IP address 169.254.21.127 and will not be able to connect to the Internet." but I have been connected to the internet from my iPad through my iMac for over six months, it's only since updating to Lion that the problem started. Any help please.
    George

    the solution is here.
    https://discussions.apple.com/message/16224461#16224461
    i had the same issue. but now it all works like it used to.

  • Ethernet has a self-assigned IP address and will not be able to connect to the Internet. on host mac

    im using a cross over cable from a macbook pro{mavrics}, to a imac {lion}. ive been sharing internet from a dongle no problem for months but now it started saying Ethernet has a self-assigned IP address and will not be able to connect to the Internet. on the macbook.   and every thing is  hay ok on the imac ¿¿¿ ive been googling all day to no avail

    System prefs > Sharing. seroapple wrote:
    im using a cross over cable from a macbook pro{mavrics}, to a imac {lion}.
    Don't need a crossover cable.
    Make sure System prefs > Sharing is set up correctly.
    -> https://support.apple.com/kb/PH13855?locale=en_US

  • Ethernet has a self-assigned IP address and will not be able to connect to the internet

    Ethernet has a self-assigned IP address and will not be able to connect to the internet
    The problem appears to have been a connection error as well as the system preferences which have reset with a 'valid' IP address after a system preferences 'reboot'.

    Power off your internet router. Disconnect completely from its mains power by pulling the plug out of the mains socket. Disconnect all ethernet leads and cables to the router. Wait a minute or so and then reconnect all cables and turn on the power. See if your internet starts.

Maybe you are looking for

  • ITunes moved to a new hard drive, now acting like a newly installed program

    I just moved my ITunes to an external hard drive and followed all the directions to do so (did a google search and it lead me to this site where I followed the instructions outlined). Now ITunes won't work, it won't access any music whatsoever. In fa

  • Urgent: Problems with filters with routines in DTP

    Hi All.   I have this: ODS --> Transformation --> InfoCube   I've created a "full" DTP which has a routine in the filters because I need to calculate the from-to date in a routine.   The InfoObject in the ODS is: <b>0CREATEDON</b>   It has no errors.

  • Employee Vendor and GL Posting

    HI Guru's Here in my Client there is no HR module, every employees are  considered as a Vendor there are so many deductions on employee salary, so i want to Map the same in SAP, So, kindly give the steps in posting of trasactions in each GL Accounts

  • HP UPD 5.9

    U have updated the HP UPD on my netware 6.5 broker from 5.7 to 5.9. I have iprint client 5.96 on my windows 7 x64 machines and since the updated driver the printing is so slow in every application. To quick print an email in Outlook takes at least 30

  • Moving multiple projects that reference the same one event...

    After a help and advice from several of you here, and watching and rewatching some tutorials, I finally figured out how to properly move/archive projects to an external drive.  But I do have at least one question: Say I copy a project to an external