Wi-fi is enabled but will not connect to internet

Hi as above everything seems to be set ok. wi-fi symbol on i-pod . network is detected and password is correct.
then when i try get the message not connected to the internet.
many thanks.

Check out Troubleshooting Wi-Fi networks and connections and see if that helps.
Good luck!

Similar Messages

  • My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet.

    My laptop compaq presario will not connect to the Internet anymore after buying airport extreme. Why? It detects the network, accepts my password, but will not connect to Internet. I tried to repair connection, tried to reboot modem several times, I even updated my computer. Nothing. All it says is that it does not detect modem. Why?

    Welcome to the support community group.
    First, are you sure that your AirPort Extreme has been configured correctly and is properly connected to your modem?
    Begin by telling us how you have things connected and if the Airport Extreme is replacing a previously owned router or is this an entirely new installation?
    First be sure that your modem is working and properly connects you to the internet using an ethernet cable directly connected to your laptop.  Once you're sure that's working, reset the AirPort to factory defaults by disconnecting it from power and pressing and holding in the small reset button on the back  for 15 - 20 seconds while you reconnect it to power.  Then turn everything off for 5 minutes. Connect the Airport to your modem with and ethernet cable to the Airport WAN port on the back (check the user guide to make sure you connect the cable to the correct port) then connect a second ethernet cable between the laptop and one of the LAN ports on the AirPort Extreme.
    Then power up the modem first, wait 5 minutes and then power up the Airport, wait 5 minutes and finally power up your laptop.
    Then run the airport configuration utility from your laptop.  Since you're not using an Apple computer, be sure that all of your firewall, and virus blocking and checking software is disabled before you run the airport configuration utility.  Once you run the utility, it should detect your AirPort and allow you to use the configuration wizard to set things up.
    Check back if you're still having problems.

  • HT4528 My iphone 4s is connected to my wifi but will not connect to internet

    My Iphone 4S is connected to my wifi but will not connect to the internet.  Does anyone know how to fix this?

    Try going to settings>general>reset>reset network settings. Once you've reset your network settings you will need to be able to plug in your wifi/router password to your wifi appliance. (password to wifi router)
    Good luck.

  • Green light on Airport Extreme but will not connect to internet

    I have tried restarting computer and Airport Extreme but it will not connect to internet.  Unit has been working great up until now.  I have made no changes in system.
    This Airport/time machine is 2009 version.

    The Cisco DPC 3010 is a cable modem, so you will need to let the modem completely reset before you connect it to the AirPort Extreme.
    It may be necessary to perform a Factory Default Reset on the AirPort Extreme and reconfigure it, but we will try a shortcut first to see if that can be avoided.
    Power off the entire network.....all devices....modem, AirPort, computers, mobile devices, etc in any order that you want.
    Be sure to disconnect the power cable on the modem, either on the back of the device or pull the power cord from the wall AC jack
    Leave everything powered off for at least 30 minutes.  Longer is better, as it sometimes takes the equipment back at the ISP longer to completely reset and issue a new fresh IP address to the modem.
    After the wait period, power up the modem first, and let it run for at least 5 minutes by itself. If your modem documentation states that the modem should be powered up for 15 minutes, then go with 15.
    Power up the AirPort Extreme next, and let it run a few minutes
    Then power up other devices one at a time about a minute apart
    When the entire network is back up, check the network.
    It this does not work, you will have to start over again as above, except this time you will need to perform a Factory Default Reset on the AirPort Extreme.
    To do that, power off the AirPort Exterme for a few minutes
    Hold in the reset button on the back of the Extreme.....and keep holding it in for an additional 9-10 seconds while you simultaneously plug the power back into the Extreme
    Release the reset button after the hold period, and allow a full minute for the Extreme to restart to a slow, blinking amber light
    Power off the AirPort now, and start it back up in the proper sequence
    If things still don't work, then you likely have a defective AirPort Extreme that will need to be replaced.

  • Airport shows being connected but will not connect to internet

    Airport will not connect to internet yet shows me as connected. 
    When and if I do get connected, I will loose the connection and unable to access the internet.
    This has happened using several different wireless locations.
    Please help as to what my settings should be or how to correct the problem

    What debugging steps have you taken?
    Connecting to your wireless network and connecting to the Internet are two different parts of the connection process.
    If you open your Network preferences panel does it show you have an IP address of the form 169.x.x.x?

  • BEFW11S4 Problems - Says connected but will not connect to Internet

    Hello, everyone, I have one desktop hooked up to a BEFW11S$ router. I also have another desktop and a notebook running off of it. The main one, as well as the other desktop work perfectly fine, while the other desktop is just a  bit on the slow side, but the laptop, which says it is connected will not connect to any form of internet, whether it be IE or MSN. I'm not sure, but I think the connection between the computers needs re-establishing. Though I have no idea how to go about doing this... Any help? T.T
    Message Edited by ravens6938 on 01-02-200702:23 PM

    Hi… I would suggest you to delete preferred wireless networks on your wireless laptop, and then try to reconnect to the wireless network. Also check what ip address you are getting, is it a valid ip address from the router. Try deleting cookies in internet explorer. Then check the connection. You cannot change anything on the router because other two computers are working fine.

  • My iPad can find a network but will not connect to internet ever since i did last software update

    Ever since the last software update my iPad will not connect to the internet. I can see the networks and have great signal strength but it just won't connect. Other iPad users who have not done the update can sit next to me and connect with no issues. My iPad is only a month old! not good enough!

    There are no changes to WiFi in the last two updates 4.3.4, and 4.3.5. These contained only fixes for a malicious PDF file handling problem, and a security certificate handling problem.
    Try using Settings > General > Reset > Reset network settings to see if that fixes your problems.

  • UPDATE FIREFOX , DOWNLOADS BUT WILL NOT CONNECT TO INTERNET, OLD ONE DOES. WORKING ON MAC WITH LEPOARD

    I downloaded the updated Firefox 4 on my macbook pro. I am currently using Firefox 3.5 with no problem. With the new download the firefox will not connect to the internet. Help please?

    Hello!
    Welcome to Apple Discussions:
    What IP address is your Powerbook getting from the AE?

  • Recently bought a Pro. At home, It connects to my wifi, and internet, just fine. On the road, It will connect to wifi sites, but will NOT connect to internet. Other devices connect okay

    Recently bought a Pro. At home, it connects to wifi and internet just fine. On the road, it connects to wifi sites, but willl NOT connect to the internet, while Other devices, iPad2 and iPhone connect and browse just fine.

    this is Mac Pro forum
    You want the notebook forum: MacBOOK Pro
    https://discussions.apple.com/community/notebooks/macbook_pro

  • Macbook will connect to wifi but will not connect to internet

    Lately I've been experiencing an issue with my internet, my computer will connect to wifi, but the internet will not work. I have tried multiple wifi networks, and sometimes the internet works but it is slow, or sometimes it won't work at all. For whatever reason apple.com is the only one working at the moment.. how convienent.. I have rebooted my laptop, the router and my operating system is up to date. Please help!! I'm a college student and internet is crucial for one of my classes!

    Check proxies ...
    Open System Preferences > Network > Advanced > Proxies
    Deselect any checked boxes on the left then click OK.
    Relaunch your browser to test.
    And make sure the firewall is off. System Preferences > Securty & Privacy > Firewall
    If it's on, you may need to click the lock icon to turn if off. You may be prompted for your admin password.
    Message edited by:  CS

  • Network says I'm connected but will not connect to internet

    My iMac (2007 w/OSX 10.6.8, 2.4GHz Intel Core 2 Duo, 4 GB) suddenly stopped connecting to the Internet even though it says "airport is connected & Ethernet is connected" I spent and hour + with tech support from Our ISP, took it to the local Athorized Mac seller I bought it from and it worked fine with their connection. also all other computers in our home work fine from my iPad to ROKU. is ther a way of removing previous network settings and then running the setup help from scratch? It just doesn't make sence, some times a RSS will open without any pictures but when I try to go to one the links I get the same old "You are not connected to the Internet and the Network Diagnostics... Button appears. Trying to go to any regular web page never works BTW I always get the previous mentioned message. thank you for reading and I hope someone can help me fix this what I think is a simple but out of my realm of ability to fix and I don't want to make it worse !
    Paul ///

    Hi… I would suggest you to delete preferred wireless networks on your wireless laptop, and then try to reconnect to the wireless network. Also check what ip address you are getting, is it a valid ip address from the router. Try deleting cookies in internet explorer. Then check the connection. You cannot change anything on the router because other two computers are working fine.

  • Photosmart 5520 connect to wireless network but will not connect to internet

    My Photosmart 5520 printer connects to my network just fine and prints from all my computers just fine.  But when I attempt to print through ePrint or google print, nothing happens.  When I hit the eprint bottom on the front of the printer, it tells me the printer is not connected to the internet.

    Oh, you can check this thread about the same issue
    http://h30434.www3.hp.com/t5/ePrint-Print-Apps-Mobile-Printing-and-ePrintCenter/Unable-to-connect-to...

  • Macbook Air connects to network fine but will not connect to internet?

    I am staying with someone away from home and cannot use my Macbook Air (OSX 10.9.4) with the internet.   They have a Comcast network and all other devices including my iPhone, connect with no problems.   I have connected to the network and it works initially (loading a web page or retrieving email) but almost immediately the internet stops working and pages freeze trying to load.   The wifi shows no problems but internet connection is not working for both email and safari
    I have cleared the network info and set up again, reset the router, restarted my computer and other trouble shooting.   I have been able to connect to the same network by tethering my phone as well but cannot use the network directly.
    Everything indicates that there the network connection is fine but but no internet, please help!

    Connect to the problem network. Double-click anywhere in the line of text below on this page to select it, then copy it to the Clipboard by pressing the key combination command-C:
    www.google.com
    Launch the Network Utility application.
    Step 1
    Select the Lookup tab and paste into the address field by pressing command-V. Then press return. Post the output that appears below – the text, please, not a screenshot.
    Step 2
    Select the Ping tab and do the same. Please enter the same input as you did in Step 1. Don't use the output of Step 1 as input to Step 2.
    Important Note
    Some web browsers and mail clients will automatically convert a domain name such as "www.example.com" to a clickable URL, such as http://www.example.com. That will interfere with the test. If necessary, edit the input in the Network Utility window to remove any added characters.

  • Green light, but will not connect to Internet

    Set up the router easily, solid green light. Airport Utility says Airport is green, but Internet connection is "disconnected"

    Hmmm. I'm not familiar with Arris, but the power down / power up sequence works with any cable modem that I've ever used.
    If you are:
    Connecting to the WAN "O" port on the AirPort Extreme
    Verified that the Ethernet cable is working correctly
    I am running out of ideas
    I assume that the Airport Extreme is functioning correctly, but there is no way to verify that. Suggest you give it one last shot before you haul the Extreme in to the Apple Store.
    This time, perform a Factory Default Reset on the AirPort Extreme as follows:
    Pull the power cable from the back of the AirPort Extreme
    Wait a minute
    Hold in the reset button and keep holding it in for an additional 8-10 seconds while you simultaneously plug the power back in to the AirPort Extreme
    Release the reset button after the hold period and allow 25-30 seconds for the AirPort to display a slow blinking amber light.
    Then do the complete power down and power up in sequence again to see if the modem and AirPort will associate with each other.
    If that does not do it, I am stumped.  If you find a solution, please let us know.

  • Iphone 5c is connected to Wifi but will not connect to internet

    Have had my Iphone for a year now and have never had this issue before. The device shows I am connected to the wifi but tells me it cannot connect
    to the internet. Any ideas?

        I know having wifi connection is important to your data usage amlaco. I'm sorry you're not able to use the internet . Have you tried to disable your wifi connection and renable it? Are you connected to your home wifi? Have you contacted your internet provider that is connected to your wifi?
    Kinquana_VZW
    Follow us on Twitte @vzwsupport

Maybe you are looking for

  • TO CREATE A TABLE IN JSF

    LIKE WE USE TABLE TAG AND <TD><TR> IN HTML....I WANT WE CAN CREATE A TABLE USING JSF TAGS IN A JSF PAGE.

  • Can we improve the boring color option offered by Apple?

    I am presently evaluating the Mountain Lion software and found little to cheer about. Has anyone noticed how little control we have over the color preferences AGAIN? With Apple, the past leader in graphics and inituitive customer considerations, it i

  • Document Library view selection menu missing

    Hi, I am encountering a strange issue with the SP2013 document library web part. I included a screenshot (see link) where you can see that the web part of the doc lib doesn't contain a view selector menu at the right side. This is only available afte

  • Beehive Online - Invalid User Name or Password

    All, Last week I was able to use OBEE to connect to an external workspace. This week every time i attempt to use OBEE or WebDAV for external or internal workspaces i get an error that says my user name of password is not valid. If I use IE/Firefox I'

  • Responsive Images

    I have a 900x300 images(s) on a JQuery Cycle 2 Image Slider. They look pretty good in desk view. When I switch to mobile view, they look bad, (small  image-flat with little height.) I assume part of reason is becuase of the size of image (elongated),