Wi-Fi is turned on but is not connected to a network.  What does this mean?  How can I fix it?

Wi-Fi is turned on but is not connected to a network. What does this mean?  How do I fix it?

Hi, Kozou. Welcome to the forums!
Connect your computer to the Express's Ethernet port and open AirPort Utility. Does this allow AirPort Utility to find your Express?
If so, go through the setup process. After the Express restarts, disconnect it from the computer and connect it to your DSL, cable modem, or whatever provides your internet connection. Wait a minute or so. The light on the Express should turn green.
Now tell your MBP to join the wireless network created by the Express. You can do this using the AirPort menu or the Network pane of System Preferences.
Does this work?

Similar Messages

  • Whenever I plug my iPod in the computer is comes up with this ..This iPod cannot be used because the Apple Mobile Device Service is not started. - what does this mean, how can i fix it?

    Whenever I plug my iPod in the computer is comes up with this ..This iPod cannot be used because the Apple Mobile Device Service is not started. - what does this mean, how can i fix it?

    Instructions here >  iPod touch: How to restart the Apple Mobile Device Service (AMDS) on Windows
    Or Mac  >  iTunes: How to remove and reinstall the Apple Mobile Device Service on Mac OS X

  • HT204053 I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!

    I have downloaded icloud to my pc, however when i go to sign in to Apple through icloud, i get an error message saying my apple ID is valid but is not an icloud account. What does this mean and how can i update my account so i can access icloud?!

    To use iCloud, you must first set it up with your Apple ID on a device with iOS 5 or a Mac with OS X Lion.

  • Airport (Express) is turned on but is not connected to a network.

    Hi
    I am having an issue with my Airport Express set up. I have had 18 months of use of the AE for internet access (no other wireless hardware used), but have suddenly lost the wireless ability.
    In my network preferences it shows the AE with an amber light (green on the actual AE) with the message "Airport is turned on but is not connected to a network". When I look at the Airport utility there is no AE showing even after multiple "rescans"
    I have gone through multiple processes of turning on and off the router, AE and MBP to no avail. I have gone through soft and hard reboots to intermittent visibility in the Airport Utility. This includes direct linking MBP to AE with Ethernet cable
    When the AE finally shows in the utility, i have reset all passwords etc as advised by program, but when the utility goes to restart the AE it loses it and I end up back at square one
    I know the internet is working due to Ethernet directly into the MBP
    I have take to a friends and they plug and play ... so know the AE works
    Is there something i am not doing? Why is the AE and MBP not talking to each other?
    Please someone help me !!

    Hi, Kozou. Welcome to the forums!
    Connect your computer to the Express's Ethernet port and open AirPort Utility. Does this allow AirPort Utility to find your Express?
    If so, go through the setup process. After the Express restarts, disconnect it from the computer and connect it to your DSL, cable modem, or whatever provides your internet connection. Wait a minute or so. The light on the Express should turn green.
    Now tell your MBP to join the wireless network created by the Express. You can do this using the AirPort menu or the Network pane of System Preferences.
    Does this work?

  • My ipod touch 5th gen. is not charging but is not syncing or being recognized by itunes 11 ? How can i fix this??

    My ipod touch 5th gen. is not charging but is not syncing or being recognized by itunes 11 ? How can i fix this??

    Hi cecebabymusik,
    Welcome to the Support Communities!
    Try the specific steps below for the your iPod touch first:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    If the issue is not resolved, you may need to uninstall iTunes and all of it's components, and reinstall the latest version as explained in this article:
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/TS5376
    I hope this information helps ....
    - Judy

  • TS1702 I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also can't use iCloud with Pag

    I have recently begun to use Pages and want to transfer a document between the iPad and my PC. I can transfer to the iPad, but not the other way, and am told I do not have sufficient 'privileges'. What does this mean? Also I can't use iCloud with Pages between the iPad and PC,  although I purchased extra storage in order to do this.

    If you have a PC, you don't have Pages on it. You can transfer Pages presentations to/from iCloud via http://www.icloud.com , however -- you just won't have an app on your PC to deal with Pages documents. Make sure that you have your iCloud account properly configured on your iPad.

  • When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !

    When I try to set up my time capsule it says that the PPPoE Server is not found... What does this mean and how do I fix it? Thanks !

    You are using PPPoE but there is no server to authenticate against.. or the modem is already connected and nothing else can join.
    Is this ADSL?
    Do you have the modem in bridge?
    How does it work with the modem working as router? ie what type of connection does your ISP supply.. eg PPPoE is only one.. PPPoA is another.. IPoA or ETHoA.. and sever other more specialised.. PPPoE can only work where it is supported.

  • I get a Notice of..."This iPad cannot be used because the apple mobile device service is not started....what is this and how do I fix it..Help please

    I get a notice when trying to sync my iPad. "this iPad cannot be used because the Apple Mobile Device Service is not started".....What is this and how can I fix it? Help please

    Here is a YouTube video which should guide you through a solution:  http://www.youtube.com/watch?v=VLFAo-FWLxE

  • I got home today and got a message on Messages or IMessage and the Messages app would not open i restarted my computer and it had a question mark as the icon for the app. Help!?!?! What does this meen how can i prevent further damage or fix damage delt

    I got home today and got a message on Messages or IMessage and the Messages app would not open i restarted my computer and it had a question mark as the icon for the app. Help!?!?! What does this meen how can i prevent further damage or fix damage delt

    Is this what you see when you start up your MBP?
    http://support.apple.com/kb/ts1440
    Ciao.

  • TS1717 Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

    Itunes was working earlier and now I receive message that says "the folder "itunes" is on a locked disk or you not have write permissions for this folder" - what is this and how can I fix the problem?

    Hey HaydenJulie,
    Thanks for the question, and welcome to Apple Support Communities.
    The following article provides information on permissions issues with iTunes. The troubleshooting steps included may resolve your issue:
    iTunes: Missing folder or incorrect permissions may prevent authorization
    http://support.apple.com/kb/TS1277
    Thanks,
    Matt M.

  • HT201272 I purchase movie, when I try to view it has error massage this requested ULR not found on server. What does this mean and how can I view this movie?

    I purchase a movie on iTunes, when I tried to view I get error massage, requested ULR is not found on server. What does this mean and how can I view this movie.

    familyfromapo wrote:
    The movies are Dexter that we purchased at a store.  He uses the Air and since it does not have the disk option this is how we were hoping he could view his shows.  We had no idea we would be breaking the law....just wanted to put all of the movies we have purchased  on the external solely for the intent of our viewing. 
    Thank you for your time and help.
    Sorry.
    It is illegal to break the encryption to copy a dvd.
    Judge: DVD-copying software is illegal - CNET News
    Judge Rules DVD-Copying Software Is Illegal | Threat Level | Wired ...
    MPAA Says Making Even "One Copy" of a DVD is Illegal

  • My WiFi network is not connecting ever since i went out of town how can I fix it?

    My WiFi network is connected on my PC but it would not locate the network nor be connected to my ITouch wat can I do to fix it, it did not work ever since I went out of town how can i fix it let me know soon thanks

    Try turning Wi-Fi Off/On from Settings, if it still doesn't show up try Resetting Network Settings on the iPod touch.
    You can also try unplugging the Wi-Fi router and then plugging it back in to restart it.
    WTH.

  • DiskWarrior: "not enough contiguous space"? -What does this mean??

    Having issues, cannot reboot, after software update. Grey screen + Apple comes up, but no wheel and no further booting.
    I'm able to boot from the DW CD.
    Hard drive capacity is 74.41GB/ available space 21.81GB.
    Graph of hard drive shows 5% out of order.
    I rebuilt the directory which shows NO changes to the number or contents of files and folders... BUT...
    "There is not enough contiguous free space for a fail-safe replacement of the directory. It is highly recommended that you create 132 MB of contiguous free space before replacing the original directory."
    So what does this mean? Contiguous free space on the hard drive or in RAM?
    (The hd doesn't seem to make sense, since it shows over 21GB of available space.)
    I've ordered a new 1GB RAM module which should arrive Friday, but should I install this when the computer won't even boot on its own?
    Help! I'm stuck and don't know what to do next. I have no idea how to go about creating 132 MB of contiguous free space.

    DW is telling you it needs 132MB of contiguous — i.e., unfragmented — hard drive space. Apparently you don't have it, because all your free hard drive space is fragmented into segments smaller than 132MB. With nearly 21GB of free space in all, that's very surprising. It suggests that the files using space on your drive must be much more fragmented than is common in OS X, which defragments most files automatically without any input from you.
    Ideally, what you would do to defragment everything on your drive, including the free space, is clone that drive to an external hard drive, and then clone the external drive back onto the internal drive. The second step in that process would erase the internal drive and then write everything back to it in unfragmented form.
    But to do that, you'd have to be able to start the Powerbook up from a source disk that contained a cloning utility and enabled you to use it. The simplest way of doing that would be to have an external drive divided into two partitions: one small partition with an OS and a cloning utility (and perhaps other disk utilities) installed on it, so you could start up from it, and another larger partition of a suitable size for cloning the internal drive to: i.e., about the same size as the internal drive, or at a minimum, 10% larger than the amount of space that's actually used on the internal drive. If you don't already have such an arrangement, you're in no position to create one now except by going out and buying an external Firewire hard drive.

  • I'm fairly new to Mac, just got the iWeb program, I dont have and can not get a Mobile Me account, does this mean I can use iWeb?

    I'm fairly new to Mac, just got the iWeb program, I dont have and can not get a Mobile Me account, does this mean I cant use iWeb?

    iWeb gives you two other options for publishing...
    http://www.iwebformusicians.com/iWeb/Publish-Website.html
    "I may receive some form of compensation, financial or otherwise, from my recommendation or link."

  • Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired. ..what does this mean?

    I did a repair and this came up afterwards...what does it mean?

    Not sure what it means but it's safe to ignore. Here's a list of messages that can be disregarded:
    http://support.apple.com/kb/ts1448

Maybe you are looking for

  • I want to call a variable in another application

    Greetings, I asked previously a similar question but I didn't got a solution to my problem, so i'll explain in details my problem: I have a Java File called Senior.java, and another one called Properties.java Properties.java is a dialog box that I ca

  • Find/replace styles in Pages 5

    In Pages '09, one can find a style, under the "Advanced" menu in the find/replace pop-up.  I use this to prepare talks, writing my own comments in a different style than what I'll print and hand out.  Thus, I find the style and replace it (with nothi

  • Purpose of message protocol file and file content conversion

    hi    i am currently working in idoc to file scenario,        In what cases we will go file and file content conversion in message protocol for file adapter. can anyone specify the real significance of it? bcoz this may help me and continue my scenar

  • What's wrong with the JSP file??Urgent Help Request

    I have run some JSP files using Apache Tomcat 4.0 but I see many similar error message for the JSP files when running on the IE. I don't whether I should install some other software or components or just program errors in the JSP files. The error mes

  • GPIB Data Transfer Rate

    The maximum data rate in the original GPIB standard is about 1MByte/s.  I have a microcontroller connected to a NAT9914 but I don't know what the transfer data rate is.  For RS232 protocol, I could specify the baudrate, say 9600.  Is it possible to s