Wi-fi network problem connecting & disconnecting
my MacBook Pro wi-fi network is giving me problem after I changed to Fiber Network.
It keeps connecting and disconnecting the Wifi network. I have no problem using Ethernet.
Anyone know what happen?
can you get anywhere on the internet with your laptop? What DNS is it using?
yes, 8.8.8.8
What servers do you have in your network? and what DNS are they using?
i changed to DNS of mine ISP's,210.22.70.3, still can not go everywhere but google's service
and if i set the DNS of ipad to a invalid server, i can not open google's page too
Similar Messages
-
Network problem (connections)
hi folks.
updated from Tiger.. have my connection with a classic network cable..
when i log in i got
3 alert saying
*"impossible to connect to the network device"* (translated from the italian "impossibile connettersi al dispositivo di comunicazione")
this happens once, then twice (in the meanwhile my connection works) then it happens for the third time, my connection stops, and after the message disappear it starts working again.
in the network preferences the connections order is done rightly.
Ethernet is the first connection avalaible.
any hint?Hi,
I´ve got the same problem. Sometime I start or restart the computer, I get the same3 alert messages ( in German ) as you. If I disconnect the cable from the computer and connect it again, the network is back again. What iMac do you have? A new one ( alu )? Is it a hardware problem?
Message was edited by: humph_rey -
Networking broadband connection disconnected
I have Mozilla Firefox as my Browser. When I go into Control Panel and enter Networking connections I note that my Optus supplied Modem WAN MINIPORT (PPPOE) shows it is disconnected with a Firewall. However the LAN connected is connected with a Firewall.
You cannot believe what I have already done. Everything you mentioned so far, and more.
I think it is pretty simple, if all interfaces are inactive, tools that use the configd system underneath will not work as expected. Only the tools that use the old ways (/etc/resolv.conf) like dig and nslookup will work.
I cannot believe that there would be no solution to this problem. There must be something that I'm missing here... -
My iPad2 no longer connects to my home wifi network but there is no problem connecting to other saved wifi networks. Currently using iOS8.0.2. with storage capacity of 12.2Gb but only 147Mb free. Disconnecting the router and rebooting the iPad worked briefly as a temporary fix but not anymore
You could try this
Temporarily disable security on your home network
See if the iPad connects
If it does then reset the security - with the same or different password -
After a Installation from Windows 8.1/windows 7 everything works fine. For example Install updates and Software. If I connect the first time a remotefx card i can use RDP as well. But if i restart the host I get the mentioned error. What can I do. These
Hosts are not in a domain configuration. I tried it too but there was no difference. I didn't discovered any errors in the eventlog, too. Only an actviex error. But same errors occurs with a succsefull rdp session.
Also strange is if i start the vm without a remotefx card it works fine again. Only session with a Remotefx card aren't possible anymore.
Is there a bug or something. I tried it many times with the same error.
Maybe someone can help me.
kind regards
TobiHi Tobi,
Thank you for posting in Windows Server Forum.
For a workaround, please try to perform the two steps.
1. Do NOT enable RDP 8 on the Windows 7 SP1 VM. You should install RDP 8 and update the ICs though.
2. Change the connection setting on the client from "Automatically detect" to "LAN"
Please check again below thread for information.
a. "The remote session was disconnected
because there were network problems during the licensing protocol" after enabling RemoteFX Windows 8 VM
(Please recheck answer by “dgeddes”)
b. "The remote session
was disconnected because there were network problems during the licensing protocol" After Installing RemoteFX
Hope it helps!
Thanks,
Dharmesh -
My ipad has been a little glitchy for the last couple of weeks....not able to load pages because of DNS lookup failure and really slow loading...some of which has to do with the DSL service I have, but I followed the directions on one of the Apple wi-fi issues pages to reset network all connections..which I did, and now the Ipad cannot connect to WiFi because it will not accept (or cannot resolve..or??) password. I am sure I am typing the password correctly and have tried it on several routers..and it cannot cannect to any router properly even with the correct password. My laptop is connected just fine and it accepts the password and I have confirmed the password with the ISP and tried other routers.
So the question is what should I do if I am entering the right password and the Ipad can't sign itself on to the Wifi network?Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are droping internet connection)
• Launch Settings app
• Tap on Wi-Fi
• Tap on the blue arrow of the Wi-Fi network that you connect to from the list
• In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
Cheers, Tom -
Direct connection network problem
hi. I've just set up a network using a direct connection cable between 2 computers. Currently the cable (15meters) is connected to the Realtek lan port with the other side connected to a SMS (100mps) network card in the other machine( pentium 2.4 GHz 640MB ram). Every few minutes or so the "network cable is disconnected" blob in the system tray appears. Also this problem persists when playing network games using a TCP connection. My IP addresses are manually set up to 197.197.197.1 & 197.197.197.2 on the other machine. All firewalls are off and both the nVidia & realtek ports give the same problem. What could be the problem?
slaska,
Just make sure you use the Port that you loaded the Drivers for. I would suggest using the nVidia one since when you load the nVidia nForce Drivers, it will active that NIC.
Are you sure you are plugging the CAT-5 Crossover into the correct NIC?
Take Care,
Richard -
TS1398 Problem connecting to both Wi-Fi and Phone networks at same time
I am having a problem on one of our iphones, where it won't connect to both the phone's network (Sprint) and our home Wi-Fi network or any other Wi-Fi network at the same time. We have another iphone and an ipad that both connect just fine, so it appears to be something specific to this phone. When connected to Sprint's network so we can use the phone (all the time), it doesn't find any networks. So, if I reset network settings, etc., I can eventually get it to find our Wi-Fi network and connect, but then it shows No Service to the phone network. Once you leave the area of the Wi-Fi network and it disconnects from it, the phone service starts to work again. I've done every network reset there is, removed the SIM Card, etc. but it continues to happen. Any ideas what might be happening?
If it is your home router that you can't connect to try rebooting it. Unplug it for about 15 seconds.
-
Problems connecting multiple macs to an Airport Extreme network.
I think this problem is similar to a previous post, but is individual in some ways.
I have 2 Airport Extreme basestations covering a large flat connected by Ethernet extending a single network. I did try to extend the network wirelessly, but this was plagued with problems where the network would work for 10 mins, then drop out as I think the basestations are slightly too far apart.
Connected to the network are a number of machines:
Wirelessly we have 3x iPhones, 1x G4 Cube, 1x iMac (current model), 2x MacBook Pro (previous model) & 1x PC.
Wired via a hub is an Apple TV, PS3, Nintendo Wii, Denon Home Cinema Amp, PS2
For aprox 6 months I have had major problems connecting all the wireless machines at the same time. I have played around with the security as per previous posts with varying degrees of success.
I seem to have the most problems with the iMac. The iMac will not join the network when there is any form of wireless security. Every time I try to set up a password it hangs when trying to join and I finally get the "There was a error joining xxxx network".
After more playing around I managed to get all the machines working by having no security on the network and locking the network down by MAC addresses.
Since last Thursday I now have a new problem. The iMac joins and stays on the network perfectly, but the second my second MacBook Pro is switched on and joins the network, the internet connection on the iMac drops out. In addition, as we use the iMac as a media server, all other machines connected to the iMac for either file sharing or iTunes sharing then get the error "the remote machine is failing to respond. Please check firewall settings if there are any". What is strange is that the iMac remains on the network, full signal, independent IP address and the second the MacBook Pro is switched off, works perfectly again.
I have tried wiping both the iMac & the MacBook Pro and re-installing their operating systems, but this only solves the problem for aprox 24 hours then all of a sudden the issue re-appears.
Can anyone out there help?Let's double-check the AirPort Express Base Station's (AX) settings ...
Perform a "factory default" reset of the AX
o (ref: http://docs.info.apple.com/article.html?artnum=108044)
Either connect to the AX's wireless network or connect directly, using an Ethernet cable, to the Ethernet port of the AX, and then using the AirPort Utility in "Manual Setup" mode, check the following settings:
AirPort > Base Station
o Base Station Name: <rename or leave default>
o Base Station Password: <enter desired password>
o Verify Password: <re-enter desired password>
o Remember this password in my keychain: (optional)
o Set time automatically: (unchecked)
AirPort > Wireless
o Wireless Mode: Join a wireless network
o Network Name: <existing AEBSn's wireless network>
o Wireless Security: <select the encryption type of the existing wireless network>
o Wireless Password: <enter the existing wireless network password>
o Verify Password: <re-enter the existing wireless network password>
Music
o Enable AirTunes (checked)
o iTunes Speaker Name: <enter desired speaker name>
o iTunes Speaker Password: (optional)
o Verify Password: (optional)
o Click Update to write the new settings to the AX
In iTunes:
iTunes > Preferences... > Advanced > General
o Look for remote speakers connected with AirTunes (checked) -
I am having a major problem connecting to FaceTime today. Message reads "unable to connect, check network connections". I am online, mail works, ex
Tc. This was not a a problem two days ago. Any suggestions?Could be that the servers are overloaded today.
-
like 2 weeks ago i called in to att to see how much is the data plan and it would end up costing $30.
so i was like screw that. well they figured that i got a new phone replacing the LG shine. so they asked
for to call this number so they can recieve data which would updated the system that i have a plam treo 750.
ever since this conflict i can't send picture messages. i get that problem. everytime i attempt to send a picture
i recieve this.
- there is a problem connection to the GPRS service in your registered home network.
- then i get a test that says error trying to make data connection. this may be casued by a voice call,
a wired activesync connection or inncorrect network setting.
please someone help me.
btw. hard reset and soft reset did not work for me.
Post relates to: Treo 750 (AT&T)problem fix, i had to call in. customer serivce. and when i called to ask about the plan. they blocked it. so i had to unblock my internet.
Post relates to: Treo 750 (AT&T) -
I jus got a MacBook pro and Im having trouble connecting to my schools network. It is not secured and only requires to login with school id. A Window pops up to sign in but it never loads anyone know why I'm having this problem? Doesn't have a problem connecting to any other wifi
"This is a flaw in OS X Lion. It does not want to connect to open WiFi that has a login page that open in a browser."
Nonsense, no problems logging in at sites that you mention. I use OpenDNS servers. For the OP try:
System Preferences>Network>Advanced>DNS. In the left side column click on the + sign and insert the following:
208.67.222.222
208.67.220.220
Then click OK, then click Apply. -
I'm having a problem connecting my BlueRay DVD player and other non-Mac devices to my AirPort Express network. Is there a limit on the number of devices I can connect to the wireless network? I never have a problem connecting a new Apple product (AirBook, iPad) and even a basic laptop. Thanks for your help.
The AirPort Express Base Station (AX) can support up to ten (10) simultaneously connected Wi-Fi clients.
-
When I enter my password to start my atv it tells me, that "there was a problem connecting to the network." My Ipad works fine in my house, but not my new atv. I have reset my password multiple times with no help. I have also rebooted my wireless server. Do I take it back?
Where is everyone???? Does anyone have an answer???
Allik1 -
Problem connecting to a wireless network
I am using 'Aztech' wifi router/ADSL modem for wireless network at my home. I had been connecting fine with the internet using it until yesterday, when, after a software update, I have been unable to connect to the network (I can access it with my wife's laptop, an acer running windows XP). I tried reconfiguring the connection, reconfiguring the settings of the wifi router and even reinstalling the software, but without any positive results.
The current situation is: I can see the network in the list but when I try to connect using the correct password, I keep getting the message "There was an error joining the Airport network '(Network Name)'".
(I have no problem connecting via the cable)
Help me out please...
Mac Book 2.0 GHz Mac OS X (10.4.8)I had the same problem with my Macbook after the update. It will no longer connect to my router using WPA-PSK authentication. It did work for me after changing my security settings back to using WEP authentication.
I have not been able to figure out the reason for this but this may help get your Macbook back on the internet for now.
Macbook Mac OS X (10.4.8)
Maybe you are looking for
-
How to pass fields in task description so that it will come in sap inbox
Hi all. (<b>very urgent)</b> I am doing one workflow on vendor payment workflow. I want to pass some fields in the task description so that that they will come in the user decision description. Pls help me solving this. Please replyif more clarifica
-
Commissioning Agent Issue .
HI The commission agent name and percentage of commission is required at the sales order and after the completion of the sales of the sales activity i.e receipt of payment the commission agent is paid on the basis of percentage of cleared payments. I
-
Narrative View chnage how data is viewed
When I select a narrative view, and enter @1 and @2 in the body, I am seeing the data structured this way: Jan 10% Feb 20% Mar 25% I want the data to look like this: Jan Feb Mar 10% 20% 25% Can this be done? Thanks.
-
Hello, I need help integrating OBIEE with portal. Also we need to make few calls to siebel analytics engine to retrive columns, reports. Once I get the columns, I want to generate reports in my own tool, along with possibilities to create chart, vari
-
ODI - Delete Shared Members?
Hello, I load a node in a Planning dimension with Shared Members using an ODI Interface. We have a need to remove all of these Shared Members before we perform the load. Is it then possible to remove all Shared Members from specific locations using O