Wi-Fi: Not Configured

I just got a new MacBook Pro running 10.9.1, and after migrating files from my old MacBook (late 2006 build, running 10.6.8) I am unable to get my AirPort/Wi-Fi up and running. On the status bar it shows "Wi-Fi not configured". When I open Network Preferences and try to connect I get a notice from Network Setup Assistant that indeed my Wi-Fi card is "turned off", but when I click OK to turn it on nothing happens and it doesn't see my home network. What's going on?
John

I did some more searching here and think I found the answer.
John

Similar Messages

  • ACS 5.3 Occurred At: Tue Sep 10 04:00:00 IST 2013 Cause: Purge Configuration Repository not configured

    hi team,
    I am runing ACS 5.3 version and i am getting error messages like below
    System Alarm [Database Purging]
    Mon Sep 09 04:00:00
    Incremental Backup Not Configured
    System Alarm [Database Purging]
    Sun Sep 08 04:00:00
    Purge Configuration Repository not configured
    Cause:
    Purge Configuration Repository not configured
    Details:
    Configure Remote Repository under Purge Configuration which is used to take a backup of data before purge.
    Cause:
    Incremental Backup Not Configured
    Details:
    Incremental backup is not configured. Configuring incremental  backup is necessary to make the database purge successful. This will  help to avoid disk space issues. View database Size is 1.27GB and size  it occupies on the harddisk is 1.22GB.
    Could any one provide solution to overcome this issue.

    Hi,
    I guess I've seen this before even we've repository and incremental backup configured fine on ACS. One reason could be for the above alarms is the configuration on the GUI might not have taken over completely in the database and alarms will trigger due to that. Please restart the services of the ACS or reload the ACS in off production hours.
    acs stop
    acs start
    OR
    reload
    ~BR
    Jatin Katyal
    **Do rate helpful posts**

  • Web service security not configured

    Hi All,
    We have new PI system 7.1 ehp1, as an initial step installation is done including post installation.I have a task of checking if
    everything is in place as the same have to be confirmed to the team which did the installation.
    When i open RWB , i could see a message with warning "WS security not configured". aprat from this everything seems to be
    fine.
    Can anyone guide me on how to set us WS security and what is the use ,importance of having that configured?

    Hi,
    I dont think you have to configure Message level security configuration manually, i have done instaltion of PI 7.1,i have not seen any step like this.
    by default it will come after completion of postinstaltion succesfully.
    my advice better to move thread to SAP NetWeaver Administartion forums,you may get good replies./
    Regards.,
    Raj

  • AirPort Setup Assistant says my Airport Card is "not configured"

    I'm trying to install an AirPort Express Base Station that I got for xmas.
    I'm using a MacBook Pro 17" with OS X 10.5.1, and my goal with the AirPort Express is to plug it into a stereo to play iTunes wirelessly.
    By the way I use AirPort on my MacBook every day, all the time, for internet access through another base station which is plugged into the internet.
    Okay, so when I launch the AirPort Setup Assistant and hit the continue button it immediately tells me "AirPort card not configured. In order to use the AirPort Setup Assitant your AirPort card must be enabled and AirPort needs to be turned on and set to use DHCP. Click OK if you would like to change these settings, or Skip if you would like to configure AirPort Base Stations using ethernet."
    After I click OK it tells me:
    "AirPort card error. There was an error communicating with your AirPort card. Please make sure it is installed properly and try the AirPort Setup Assistant again."
    Obviously my AirPort card is working fine, or I wouldn't be able to post on this forum!
    When I open Network Preferences I see AirPort is connected to my home network. In the Advanced Settings, on the TCP/IP tab I see that "Configure IPv4" is set to "Using DHCP". And "Configure IPv6" is set to "Automatically" (Not that I have any idea what these two things mean!)
    Maybe someone on this forum is much smarter than me with this stuff? Ack!

    That solved it! Thank you very much.
    Apple, if you're listening, it would be nice if something in the install flow had checked with my OS or something to see if I still needed to install what was on the CD. All I did was open the package (which was purchased in December) and follow directions, and wound up with a problem not covered in the documentation.
    Thanks to Tesserax I'm still a happy customer.
    Send Tesserax a giftcard!

  • "Storage is not configured" during failover - COH-1467 still not fixed?

    I am runing a test program using two cache nodes and one "client JVM", all on the same machine (the first cache node is used as WKA). When I kill one of the cache nodes and the restart it again I get the following exceptions:
    In the surviving cache node:
    2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1): An exception (java.lang.ClassCastException) occurred reading Message AggregateFilterRequest Type=31 for Service=DistributedCache{Name=DistributedCache, State=(SERVICE_STARTED), LocalStorage=enabled, PartitionCount=257, BackupCount=1, AssignedPartitions=257, BackupPartitions=0}
    2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1): Terminating DistributedCache due to unhandled exception: java.lang.ClassCastException
    2009-01-22 08:01:14.753/112.718 Oracle Coherence GE 3.4.1/407 <Error> (thread=DistributedCache, member=1):
    java.lang.ClassCastException: java.lang.Long
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$AggregateFilterRequest.read(DistributedCache.CDB:8)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:117)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache.onNotify(DistributedCache.CDB:3)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
         at java.lang.Thread.run(Thread.java:619)
    On the restarted cache node:
    2009-01-22 08:01:15.722/2.220 Oracle Coherence GE 3.4.1/407 <Info> (thread=Main Thread, member=n/a): Loaded cache configuration from resource "file:/C:/Javaproj/Query/lib/master-coherence-cache-config.xml"
    2009-01-22 08:01:16.565/3.063 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Service Cluster joined the cluster with senior service member n/a
    2009-01-22 08:01:16.628/3.126 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): Failed to satisfy the variance: allowed=16, actual=31
    2009-01-22 08:01:16.628/3.126 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): Increasing allowable variance to 17
    2009-01-22 08:01:17.003/3.501 Oracle Coherence GE 3.4.1/407 <Info> (thread=Cluster, member=n/a): This Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1) joined cluster with senior Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948, Edition=Grid Edition, Mode=Development, CpuCount=2, SocketCount=1)
    2009-01-22 08:01:17.065/3.563 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544) joined Cluster with senior member 1
    2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service Management with senior member 1
    2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service InvocationService with senior member 1
    2009-01-22 08:01:17.081/3.579 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 1 joined Service DistributedCacheNoBackup with senior member 1
    2009-01-22 08:01:17.097/3.595 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 4 joined Service InvocationService with senior member 1
    2009-01-22 08:01:17.097/3.595 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=n/a): Member 4 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:17.222/3.720 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): TcpRing: connecting to member 4 using TcpSocket{State=STATE_OPEN, Socket=Socket[addr=/138.106.109.121,port=8088,localport=3609]}
    2009-01-22 08:01:17.253/3.751 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:Management, member=5): Service Management joined the cluster with senior service member 1
    2009-01-22 08:01:17.393/3.891 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=5): Service InvocationService joined the cluster with senior service member 1
    2009-01-22 08:01:18.643/5.141 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:19.050/5.548 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:23.659/10.157 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:24.284/10.782 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:28.674/15.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:29.503/16.001 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:33.674/20.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:33.721/20.219 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:38.674/25.172 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:38.956/25.454 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:43.690/30.188 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 joined Service DistributedCache with senior member 4
    2009-01-22 08:01:44.174/30.672 Oracle Coherence GE 3.4.1/407 <D5> (thread=Cluster, member=5): Member 1 left service DistributedCache with senior member 4
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <Error> (thread=Main Thread, member=5): Error while starting service "InvocationService": com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=2, Name=InvocationService, Type=Invocation
    MemberSet=ServiceMemberSet(
    OldestMember=Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    ActualMemberSet=MemberSet(Size=3, BitSetCount=2
    Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544)
    Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728)
    MemberId/ServiceVersion/ServiceJoined/ServiceLeaving
    1/3.1/Thu Jan 22 07:59:27 CET 2009/false,
    4/3.1/Thu Jan 22 08:00:36 CET 2009/false,
    5/3.1/Thu Jan 22 08:01:17 CET 2009/false
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:27)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
         at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:28)
         at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
         at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
         at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:841)
         at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:140)
         at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:61)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
    Exception in thread "Main Thread" com.tangosol.net.RequestTimeoutException: Timeout during service start: ServiceInfo(Id=2, Name=InvocationService, Type=Invocation
    MemberSet=ServiceMemberSet(
    OldestMember=Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    ActualMemberSet=MemberSet(Size=3, BitSetCount=2
    Member(Id=1, Timestamp=2009-01-22 07:59:24.098, Address=138.106.109.121:54100, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22948)
    Member(Id=4, Timestamp=2009-01-22 08:00:35.566, Address=138.106.109.121:8088, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:11544)
    Member(Id=5, Timestamp=2009-01-22 08:01:16.768, Address=138.106.109.121:54101, MachineId=36217, Location=site:global.scd.scania.com,machine:N27858,process:22728)
    MemberId/ServiceVersion/ServiceJoined/ServiceLeaving
    1/3.1/Thu Jan 22 07:59:27 CET 2009/false,
    4/3.1/Thu Jan 22 08:00:36 CET 2009/false,
    5/3.1/Thu Jan 22 08:01:17 CET 2009/false
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onStartupTimeout(Grid.CDB:6)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.Service.start(Service.CDB:27)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.start(Grid.CDB:38)
         at com.tangosol.coherence.component.util.SafeService.startService(SafeService.CDB:28)
         at com.tangosol.coherence.component.util.SafeService.ensureRunningService(SafeService.CDB:27)
         at com.tangosol.coherence.component.util.SafeService.start(SafeService.CDB:14)
         at com.tangosol.net.DefaultConfigurableCacheFactory.ensureService(DefaultConfigurableCacheFactory.java:841)
         at com.tangosol.net.DefaultCacheServer.start(DefaultCacheServer.java:140)
         at com.tangosol.net.DefaultCacheServer.main(DefaultCacheServer.java:61)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:597)
         at com.intellij.rt.execution.application.AppMain.main(AppMain.java:90)
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <Error> (thread=Invocation:InvocationService, member=5): validatePolls: This service timed-out due to unanswered handshake request. Manual intervention is required to stop the members that have not responded to this Poll
    PollId=1, active
    InitTimeMillis=1232607677393
    Service=InvocationService (2)
    RespondedMemberSet=[1]
    LeftMemberSet=[]
    RemainingMemberSet=[4]
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=5): Service InvocationService left the cluster
    2009-01-22 08:01:47.659/34.157 Oracle Coherence GE 3.4.1/407 <D4> (thread=ShutdownHook, member=5): ShutdownHook: stopping cluster node
    Process finished with exit code 1
    On the client JVM:
    2009-01-22 08:01:14.815/41.265 Oracle Coherence GE 3.4.1/407 <D5> (thread=Invocation:InvocationService, member=4): Repeating AggregateFilterRequest due to the re-distribution of PartitionSet[0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, 58, 59, 60, 61, 62, 63, 64, 65, 66, 67, 68, 69, 70, 71, 72, 73, 74, 75, 76, 77, 78, 79, 80, 81, 82, 83, 84, 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, 96, 97, 98, 99, 100, 101, 102, 103, 104, 105, 106, 107, 108, 109, 110, 111, 112, 113, 114, 115, 116, 117, 118, 119, 120, 121, 122, 123, 124, 125, 126, 127]
    java.lang.RuntimeException: Storage is not configured
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureRequestTarget(DistributedCache.CDB:33)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendPartitionedRequest(DistributedCache.CDB:31)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.aggregate(DistributedCache.CDB:11)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.aggregate(DistributedCache.CDB:52)
         at com.tangosol.coherence.component.util.SafeNamedCache.aggregate(SafeNamedCache.CDB:1)
         at com.tangosol.net.cache.NearCache.aggregate(NearCache.java:453)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.typeSearch(ValueQueryInvocable.java:260)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringFirstSearch(ValueQueryInvocable.java:300)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.run(ValueQueryInvocable.java:135)
         at com.scania.oas.coherence.invocables.InvocableWrapper.run(InvocableWrapper.java:54)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.onInvocationRequest(InvocationService.CDB:10)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.onReceived(InvocationService.CDB:40)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:130)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
         at java.lang.Thread.run(Thread.java:619)
    java.lang.RuntimeException: Storage is not configured
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.onMissingStorage(DistributedCache.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.ensureRequestTarget(DistributedCache.CDB:33)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.sendPartitionedRequest(DistributedCache.CDB:31)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$BinaryMap.aggregate(DistributedCache.CDB:11)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ViewMap.aggregate(DistributedCache.CDB:52)
         at com.tangosol.coherence.component.util.SafeNamedCache.aggregate(SafeNamedCache.CDB:1)
         at com.tangosol.net.cache.NearCache.aggregate(NearCache.java:453)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringSearch(ValueQueryInvocable.java:268)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.queryStringFirstSearch(ValueQueryInvocable.java:297)
         at com.scania.oas.coherence.invocables.ValueQueryInvocable.run(ValueQueryInvocable.java:135)
         at com.scania.oas.coherence.invocables.InvocableWrapper.run(InvocableWrapper.java:54)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService.onInvocationRequest(InvocationService.CDB:10)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.InvocationService$InvocationRequest.onReceived(InvocationService.CDB:40)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onMessage(Grid.CDB:9)
         at com.tangosol.coherence.component.util.daemon.queueProcessor.service.Grid.onNotify(Grid.CDB:130)
         at com.tangosol.coherence.component.util.Daemon.run(Daemon.CDB:37)
         at java.lang.Thread.run(Thread.java:619)
    I even tried to re-write the "run method" in tthe invocable in a way that caused it to, in a loop, perform a delay and then re-try its calculations when it received a runtime exception with the text "Storage is not configured" causing the retreival a new named cache each time but this did not help - it never seemed to recover...
    Since I dont see any of my application classes in the "class cast" trace-back I assume it is an Coherence internal problem or can you thiink about some user programming error that could cause it? I am by the way not using any long or "Long in my application...
    Best Regards
    Magnus

    Hi Magnus,
    The log you provided seems to indicate that the problem was caused by the de-serialization of the “AggregateFilterRequest” message. The only explanation we have is that you are using a custom Filter that has asymmetrical serialization/deserialization routines, causing this failure. Could you please send us the corresponding client code?
    Meanwhile, we will open a JIRA issue, to make sure that Coherence handles this kind of error more gracefully.
    -David

  • Hi, I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand new a while ago i was trying to connect to my home wireless network it said that your airport is not configured then I restarted the system but it didn't restart it shows the "

    Hi,
    I just bought a new Macbook Pro 15" with SSD 256 Gb and its almost a brand-new (the 4th time to use the device) a while ago i was trying to connect to my home wireless network it said that the connection is timed out so i clicked the airport sign on the top it said that your airport is not configured then I restarted the system but it didn't restarted it showed the grey screen with the apple logo and the spinning wheel for more than 10min so I tried the force shutdown by pressing the power button till it switched off I waited for 5min then pressed the power button to start or boot the system and again the grey screen with the apple logo and the spinning wheel, I waited for more than 20min nothing changed, any solution please?
    Your help is really appreciated"

    Thanks a lot i followed the instructions for safe mode (i found out that i was pressing the C button after restarting) i did whats written there but the repair couldn't be performed so in addition i needed to re-formate the HD so i erased the volume and then repaired the disk--> quite disk utilities --> start the installation from the installation DVD.
    Thanks really appreciating your help

  • Doesn't play songs, "itunes is not configured for use with mac-formatted"??

    Hi, new ipod shuffle. Seems to charge fine, all indicator lights function as expected. Everything looks fine in itunes. But it doesn't play songs. I have the most recent versions of itunes and the ipod software. Re-set, updated, and restored, nothing works. Even restored using the restore utility. Re-started computer. Checked for volume control. Won't play songs. Tried different file types. Songs play fine from itunes library and from the device's library within itunes. Tried different headphones. Hooked it up to computer speakers. Turning volume all the way up on device and speakers, heard some very faint rhythmic static, so my guess is the jack socket (or whatever you call it) is just messed up, but it seems weird that it can transfer power and data to the device but doesn't work for sound...
    The only other issues that have come up is that the drive disappears in explorer once it syncs with itunes. Other people who've noticed this seem to have completely different problems so I don't think it's related.
    Also, I have MacDrive on my computer. And when it starts up with the ipod plugged in, MacDrive offers the message "Itunes is not configured for use with Mac-formatted ipods." It offers to automatically reconfigure itunes so it can read mac-formatted ipods. Since I've restored the device, I don't see why formatting should be an issue so I say "no."
    Should I try letting macdrive do its format thing? Should I try formatting the ipod disk on the My Computer menu? Or should I just email apple and tell them the jack's busted?
    Thanks for any thoughts!

    Well, I have had my iPod for about 3 years, it is a 4th generation non-video 40 GB. One day it just stopped working, and now it does not play any songs. when I turn it on it makes this odd whirring sounds that computers make when they try really hard to do something. I cannot charge it, and it is not recognized by iTunes. Also when I turn it on, I get the apple.com/ipod/support (or whatever it is) screen. Needless to say, my warranty is expired, and so I cannot do anything for it except get a new battery, or buy a new one. Is there any way to fix this problem, or anyone out there who is experiencing the same thing?
    I'm having the exact same problem with my wife's iPod. However it will play about 3 seconds of a song and go onto the next song.
    If there is anyone out there that can help please do!
      Windows XP  

  • My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this

    My wireless keyboard no longer connects with my iMac since changing the batteries. It now shows as not connected, not paired and not configured. A friend recently connected his iPad to the iMac and since then the problem started. Any ideas to resolve this?

    a friend told me that he wants my os x cd for my macbook pro to upgrade his imac.
    The discs that come with your Mac are "machine specfic" and cannot be used on another Mac.

  • MFL: The dependency is not configured in schema resource. Possible reason one or more import/include is not set   correctly.

    HI Friends,
    I have a created a MFL to transform XML to Non XML format. When am generating a XSD out of this MFL am getting this Error:
    The dependency is not configured in schema resource. Possible reason one or more import/include is not set
    correctly.
    Here is the snippet of the XSD:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
              xmlns="http://www.w3.org/2001/XMLSchema"
              targetNamespace=""
              xmlns:mfl="http://www.bea.com/mfl"
              elementFormDefault="qualified">
        <xsd:import namespace="http://www.bea.com/mfl"/>........
    Later Part i have searched for mfl.xsd in com.bea.wli.core.mflengine_1.x.x.x.jar in my.........../Oracle_OSB1/modules  and imorted this XSD into my eclipse workspace.
    Then i added the schemalocation attribute to the Import element. which looks something like below:
    <?xml version="1.0" encoding="UTF-8"?>
    <xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
              xmlns="http://www.w3.org/2001/XMLSchema"
              targetNamespace=""
              xmlns:mfl="http://www.bea.com/mfl"
              elementFormDefault="qualified">
        <xsd:import namespace="http://www.bea.com/mfl" schemaLocation="../../mfl.xsd" />......
    After doing these changes also am getting the same error... can anyone help me out of this????

    Hi Arun,
    Also in SB console we can refer xsds from other projects but again OEPE doesnt seem to support that we will have to make duplicate copies of the resources in each project.It is not like that if you are using OEPE then you can not refer resources from other projects. Just what you need to do is that give relative path of the resource which is there in the file system. It does not matter that to which project it belongs. Yes, now with OEPE, you have to do this manually.
    Regards,
    Anuj

  • INS-40925 - One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.

    Hi All,
    I am facing the below error while installing Oracle RAC in Silent Mode.
    SEVERE: There are no common subnets represented by network interfaces across all cluster nodes.
    SEVERE: [FATAL] [INS-40925] One or more nodes have interfaces not configured with a subnet that is common across all cluster nodes.
       CAUSE: Not all nodes have network interfaces that are configured on subnets that are common to all nodes in the cluster.
       ACTION: Ensure all cluster nodes have a public interface defined with the same subnet accessible by all nodes in the cluster.
    My /etc/hosts is given below.
    127.0.0.1        localhost    localhost.localdomain
    #Public
    192.168.1.101      rac1        rac1.localdomain
    192.168.1.102    rac2        rac2.localdomain
    #Private
    192.168.2.101    rac1-priv    rac1-priv.localdomain
    192.168.2.102    rac2-priv    rac2-priv.localdomain
    #Virtual
    192.168.1.103      rac1-vip    rac1-vip.localdomain
    192.168.1.104    rac2-vip    rac2-vip.localdomain
    #SCAN
    192.168.1.105    rac-scan    rac-scan.localdomain
    Could you please help me to get rid of the error INS-40925....Any Idea...???

    Hi Ramesh,
    Please find the result of ifconfig -a from both nodes RAC1 & RAC2.
    ifconfig -a in RAC1
    [oracle@rac1 Desktop]$ ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 08:00:27:17:7A:D5
              inet addr:192.168.1.101  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe17:7ad5/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:102 errors:0 dropped:0 overruns:0 frame:0
              TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:25472 (24.8 KiB)  TX bytes:3322 (3.2 KiB)
              Interrupt:19 Base address:0xd020
    eth1      Link encap:Ethernet  HWaddr 08:00:27:C0:AC:DB
              inet addr:192.168.2.101  Bcast:192.168.2.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fec0:acdb/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:12 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:240 (240.0 b)  TX bytes:816 (816.0 b)
              Interrupt:16 Base address:0xd240
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:56 errors:0 dropped:0 overruns:0 frame:0
              TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6394 (6.2 KiB)  TX bytes:6394 (6.2 KiB)
    virbr0    Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    virbr0-nic Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    ifconfig -a in RAC2
    [oracle@rac2 Desktop]$ ifconfig -a
    eth0      Link encap:Ethernet  HWaddr 08:00:27:C9:38:82
              inet addr:192.168.1.102  Bcast:192.168.1.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fec9:3882/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:122 errors:0 dropped:0 overruns:0 frame:0
              TX packets:59 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:32617 (31.8 KiB)  TX bytes:5157 (5.0 KiB)
              Interrupt:19 Base address:0xd020
    eth1      Link encap:Ethernet  HWaddr 08:00:27:90:B5:A0
              inet addr:192.168.2.102  Bcast:192.168.2.255  Mask:255.255.255.0
              inet6 addr: fe80::a00:27ff:fe90:b5a0/64 Scope:Link
              UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
              RX packets:4 errors:0 dropped:0 overruns:0 frame:0
              TX packets:11 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:1000
              RX bytes:240 (240.0 b)  TX bytes:746 (746.0 b)
              Interrupt:16 Base address:0xd240
    lo        Link encap:Local Loopback
              inet addr:127.0.0.1  Mask:255.0.0.0
              inet6 addr: ::1/128 Scope:Host
              UP LOOPBACK RUNNING  MTU:16436  Metric:1
              RX packets:56 errors:0 dropped:0 overruns:0 frame:0
              TX packets:56 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:6390 (6.2 KiB)  TX bytes:6390 (6.2 KiB)
    virbr0    Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              inet addr:192.168.122.1  Bcast:192.168.122.255  Mask:255.255.255.0
              UP BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:0
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)
    virbr0-nic Link encap:Ethernet  HWaddr 52:54:00:CC:BD:FB
              BROADCAST MULTICAST  MTU:1500  Metric:1
              RX packets:0 errors:0 dropped:0 overruns:0 frame:0
              TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
              collisions:0 txqueuelen:500
              RX bytes:0 (0.0 b)  TX bytes:0 (0.0 b)

  • Server 2012 R2 - Installing but not configuring WDS role

    I would like to install the WDS role on a server but not configure PXE or the DHCP settings until later on this week. We currently have an existing WDS server running on Server 2003 DHCP is not running on the old server and will not be running on the new.
    I need to break this migration into pieces throughout this week. If I can get the role installed with out configuring those two PXE will it allow me to test importing my existing boot images?

    Hi,
    Is there any update?
    If you have any questions please feel free to let us know.

  • Can not configure Oracle 10g form  on oracle 11g client

    Hi
    I need to install oracle 10g form in my system .
    Here is my system
    1. OS --XP
    2. 32 Bit
    4. Already oracle 11g release client installed ( I think that create the problem )
    I tried to install oracle 10g form , it installed but can cont configure net manager for it , Always it point to 11g client and hence I could not configure .
    Also I tried install Oracle Forms first then 11g client , But  I got same issue .
    I think if  I created multiplr home one for 11g client and other for forms , it may work out .
    Please  help me
    Debashis

    While deploying the example 'VacationRequest' in the oracle complete guide for 11g, i got an exception like this
    "12:08:15 PM] Deploying Application...
    [12:11:16 PM] [Deployer:149191]Operation 'deploy' on application 'VacationRequestTaskFlow' is initializing on 'soa_server1'
    [12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: [Deployer:149145]Unable to contact 'bam_server1'. Deployment is deferred until 'bam_server1' becomes available.; nested exception is:
         java.rmi.UnknownHostException: Could not discover administration URL for server 'bam_server1'.
    [12:11:24 PM] [Deployer:149193]Operation 'deploy' on application 'VacationRequestTaskFlow' has failed on 'soa_server1'
    [12:11:24 PM] [Deployer:149034]An exception occurred for task [Deployer:149026]deploy application VacationRequestTaskFlow on soa_server1.: Failed to load webapp: 'VacationRequestTaskFlow.war'.
    [12:11:24 PM] Weblogic Server Exception: weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
    [12:11:24 PM] Caused by: java.lang.ClassNotFoundException: oracle.adf.library.webapp.ResourceServlet
    [12:11:24 PM] See server logs or server console for more details.
    [12:11:24 PM] weblogic.application.ModuleException: Failed to load webapp: 'VacationRequestTaskFlow.war'
    [12:11:24 PM] #### Deployment incomplete. ####
    [12:11:24 PM] Deployment Failed"
    Can anyone help in this.

  • Mail sender adapter POP server not configured for URL access

    Hi Experts,
    I have a Mail --> PI --> R/3 scenario and I am configuring the Mail sender adapter for POP3. The issue is that the POP server is not configured to be accessed via a URL and hence the URL pop://hostname/ is causing the following error at runtime:
    _1. When I use pop://Fully qualified host name/
    _Error: exception caught during processing mail message; java.net.UnknownHostException
    _2. When I use pop://IP address of host/
    _Error: exception caught during processing mail message; java.net.SocketException: Connection timed out:could be due to invalid address
    I am able to ping the POP3 server from the PI server using both the FQDN and IP address.
    Can someone please help.
    Thanks,
    Shobhit
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM
    Edited by: Shobhit Swarup Mathur on Jul 14, 2009 9:29 AM

    Hi Shobhit
    Check with these notes:
    804102
    xi 3.0 mail adapter with pop3 user authentication problem
    810238
    XI 3.0 Mail Adapter for POP3 may not report some errors
    also check mailserver security settings ...
    Connection refused occures when XI cannot connect
    in most cases so try checking it again , maybe some ports are not opend on the firewall
    Thanks
    Edited by: Abhishek Agrahari on Jul 14, 2009 11:44 AM

  • The Em Key is not configured properly or is corrupted in the file system and doe s not exist in the Management Repository.

    I'm getting this error and is there any way to resolve this without re-creating the service/s again, etc. Just curious if there are any suggestions/steps I may have missed, if not, I'll drop and recreate the services again
    Anyway, I have a backup of the emkey.ora and put it in the sysman/config directory, but still doesn't work... please see below...
    C:\Documents and Settings\abigail>emctl status emkey
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    Please enter repository password:
    The Em Key is not configured properly or is corrupted in the file system and doe
    s not exist in the Management Repository. To correct the problem:
    1) Copy the emkey.ora file from another OMS or backup machine to the OH/sysman/c
    onfig directory.
    2) Configure the emkey.ora file by running "emctl config emkey -emkeyfile <emkey
    .ora file location>".
    C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
    roduct\11.2.0\dbhome_1\sysman\config
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    Please enter repository password:
    The Em Key is already configured. To override the current configuration, run "em
    ctl config  emkey <options> -force".
    C:\Documents and Settings\abigail>emctl config emkey -emkeyfile E:\app\abigail\p
    roduct\11.2.0\dbhome_1\sysman\config -force -sysman_pwd ********
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    The Em Key could not be configured. Unable to access file E:\app\abigail\product
    \11.2.0\dbhome_1\sysman\config.
    C:\Documents and Settings\abigail>emctl secure dbconsole -sysman_pwd ********
    Oracle Enterprise Manager 11g Database Control Release 11.2.0.1.0
    Copyright (c) 1996, 2010 Oracle Corporation.  All rights reserved.
    http://ABIGAIL:5501/em/console/aboutApplication
    DBCONSOLE already stopped...   Done.
    Agent is already stopped...   Done.
    Securing dbconsole...   Started.
    Please enter repository schema password:
    Securing dbconsole...   Failed.
    EMKey is misconfigured.

    Sorry but I'll have to ignore your suggestion, and don't worry about how I spend my time
    AND OHMYGODD IT WORKSS!!! For future reference, this is how I solved it based on my searches, actually based on one particular search:
    http://franjv.blogspot.com/2013/08/emkey-problems-in-oracle-rac-11gr2.html
    Thank youuu whoever wrote that and... is it the same "Fran" who helped me the last time?!? Coincidence??
    ANyway, thank youuuu

  • IDOC Scenario: System not configured as XI integarton engine

    Hello Experts,
    I have beeen trying to solve this since a few days.
    I have created an IDOC scenario  from SAP ECC s/m to PI 7.0.
    The IDOC is being sent successfully fron SAPECC with status 03 in Transaction WE05.
    But in PI 7.0 I am not able to view these messages anywhere in WE05.
    SXMB_MONI of PI 7.0 shows an error record for previous trials and shows error status (red) as "System not configured as XI integration engine"
    I have already set configuration parameters on PI7.0 in SXMB_adm.
    Your suggestions will be appreciated.
    Thanks in advance,
    Elizabeth.

    Hi,
    you can check in PI:
    - TCODE - SXMB_ADM
    - integration server
    - edit - change global config - check if you have: integration server set
    Regards,
    Divya

  • OSB Error in Eclipse: The JCA dependency is not configured.

    Hi All,
    I am trying to use db adapter in OSB and I created the adapter in jdev and imported it in Eclipse.
    I have installed Weblogic,OSB and configired the domain for osb, I can login to OSB and weblogic console.
    I followed these steps to get there and now the db.jca file shows errors The JCA dependency is not configured.
    http://guidoschmutz.wordpress.com/2010/08/08/oracle-service-bus-11g-and-db-adapter-a-different-more-integrated-approach/
    Few of the things I noticed:
    when I tried to copy the adapter from eclipse/plugin/*.jca/Dbadapter to Jdev/integration/lib/Dbadapter
    I dint find one in eclipse/plugin/*.jca/Dbadapter
    I created a OSB Configuration Project and not sure if it was created correctly and affecting this, as a matter of fact
    are there any configurations I am missing to start.
    I have like tight schedules and would really appreciate any help.
    Thanks a lot again..

    Yeah I checked that the wsdl is present.
    One more thing I am noticing is the wsdl created in Jdev 11.1.1.4 doesnt show the binding and port when imported in the OSB Project resources.
    Is there a way we can fix this?
    Thanks.

Maybe you are looking for

  • ITunes is duplication my purchases and clogging my hard drive

    Hi folks, it doesnt sound critical but this is my situation: I have a rather large music collection so ever since I started using iTunes I have always had my music on an external drive(a NAS more specifically). My music library has always been 'z:/mu

  • How can I create a loop in a multi-record block (on the background)

    I have a multi-record block. In one item I change a value. Upon this change, in the when-validate-item I would like to change other records in the same block. I planned to loop the block with go_record and to do my things in each record. Unfortunatel

  • Validating JTextfield in an Applet

    I am doing a simple assignment for a Java class I am taking. The assignment consists of doing the Tower of Hanoi with just symbols showing the moves of the disks. I have been successful in writing the recursive statement and init() but I am having tr

  • Illustrator CS3 Windows - Freezes/Crashes/locks when using open dialog.

    I have looked all over the internet for a solution like this and tried all sorts of possible combinations and none worked. So I set about tracking it down one afternoon. It only took me 4 hours to find the issue. I think it's when the Version Cue pre

  • Ipod Touch shuts down and wont power up

    I have a 1st generation 16GB Ipod Touch, after cleaning the screen this morning i notice the display begins to fade and then it powered down. When I try to power it back on nothing happens. I tried a hard reset (holding the sleep/power buttonn down f