Wi-Fi not recognizing any networks

So I have a wireless network set up at my house. However, my ipod will not seem to recognize my network no matter what I do. Under the Wi-Fi settings, its always saying "Choose a Network..." and never seems to find anything. I was out and about with it, and it seems my ipod doesn't recognize/find any networks out there! Anyone know a solution to this issue?

blueburst4 wrote:
Ok so i do have the wifi address. And ive tried resetting everything and it is still not working. I'm stuck!
If the tips in the articles linked above did not resolve the issue, you can try restoring the iPod and setting it up as a new iPod.
If the issue persists after restoring the iPod, make a reservation to have a Genius at a local Apple retail store take a look at it or call AppleCare.
http://www.apple.com/retail/geniusbar/
U.S. iPhone technical support: 1-800-MY-IPHONE (1-800-694-7466)
-Jason

Similar Messages

  • Wich drivers to install after ´Windows did not detect any networking hardware´

    Hi there, I just reinstalled my laptop. But something went wrong. My laptop says now:Windows did not detect any networking hardware´ I found already out that I need to install drivers. But there is so much choice. Wich one do I need to install.http://h20566.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5405166&swLangOid=8&swEnvOid=4059 Hope you can help me!Freek

    Hi @sweetandsouther ,
    Welcome to the HP Forums!
    It is a terrific place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    How Do I Find My Model Number or Product Number?
    I understand that Windows it not detecting any network hardware.
    If you check Device Manager is it recognized?
    If the card is listed is there an error on it?
    If not and you are out of warranty you could try reseating the network card.
    Here is a link HP Notebook PCs - Testing for Hardware Failures (Windows 7, Vista)  to that may also help.
    Here is a link to  HP PCs - Troubleshooting your wireless network and Internet connection (Windows 7) that may also help.
    Have you ran the HP Support Assistant ?
    Have you tried using MS Fix It?
    You may choose to contact HP support for assistance with this difficulty.
    Please call our technical support at 800 474 6836. If you live outside the US/Canada Region, please click the link below to get a support number for your region.
    World Wide Phone Support
    Good Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    My imac is not recognizing any external dvd writer drive. I have imac with Core i7 and Mac OS 10.6.8. I have tried external dvd writers from Samsung and Amazon Essentials but the computer does not recognize any of them. Which Dvd writer is compatible?

    I have an external firewire burner; it never shows on the desktop unless I insert a CD or DVD - that icon will then show (if I have my preferences set to show those on the desktop). Hae you checked in Disk Utility (Applications > Utilities) to see if it is listed under drives?

  • Photoshop CS6 is not showing any network drives within windows 8.1.

    Photoshop CS6 is not showing any network drives within windows 8.1, I can only browse the local disk for files. Please advise?
    And when i try opening a file directly from the network, photoshop starts but does not open the selected file?

    The dialog you show there looks like it may be a CS6 open dialog running on windows 8.1 that is showing what is local.  Network is not highlighted selected.
    Here is a CC Open one windows 7 pro showing  areas of what is accessible.

  • TS1363 after up dating to 11.1.5.5 itunes does not recognized any of my devices.  I've tried everything listed.

    after up dating to 11.1.5.5 itunes does not recognized any of my devices. I have tried all the recommendations in help.

    Updating the USB driver did work.  Referenced in other postings as Section 5.  I guess I had not tried that one.
    Thanks

  • USB not recognizing any of my iphone?

    Please help!
    My macbook is not recognizing any of my iphones. I have 1 3gs and 1 3g phone when I plug them into usb ports they do nothing. Not even charge. When I connect the to my Macbook Pro the connect and charge and recognize fine. Can anyone help? Thanks

    Are you really running Tiger 10.4.11 still on your MacBook?
    This may be an issue for your iPhone.
    Adam

  • Workstation not mapping any network drives

    Im having an issue with different workstation not mapping any network drives. The issue to would seem totally random. Each time is over a wired connection. I havent been able to find a TID about this. The issue also just seems to have started, however no changes have been made to any of the workstations Ive seen this on. The errors I get in the login script are below. The servers are all NetWare 6.5SP7. Suggestions?
    LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 15 (8819).
    LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 13 (8819).
    LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 9 (8819).
    LOGIN-LGNWNT32.DLL-918: This utility was unable to get connection information. Error code: 8801

    Hi,
    technomoney wrote:
    >
    > Im having an issue with different workstation not mapping any network
    > drives. The issue to would seem totally random. Each time is over a
    > wired connection. I havent been able to find a TID about this. The
    > issue also just seems to have started, however no changes have been made
    > to any of the workstations Ive seen this on. The errors I get in the
    > login script are below. The servers are all NetWare 6.5SP7.
    > Suggestions?
    >
    > > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 15 (8819).
    > > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 13 (8819).
    > > LOGIN-LGNWNT32.DLL-923: An unexpected error has occurred: 9 (8819).
    > > LOGIN-LGNWNT32.DLL-918: This utility was unable to get connection
    > > information. Error code: 8801
    Basic network connectivity issue. One known common culprit for this
    error is a workstation firewall, but the raw symptom just means that
    unexpected network connectivity problems occured.
    CU,
    Massimo Rosen
    Novell Product Support Forum Sysop
    No emails please!
    http://www.cfc-it.de

  • Airport does not recognize any networks, no signal whatsoever, SOMEONE HELP

    Hello, I use an iBook at the office, i have been using it for several months here and at home, worked fine until yesterday, logged on in the morning everything was working fine, until airport had no signal, it did not recognize any networks, at first i thought it was a problem here at the office, all the other computers are working.
    I tried it at home and it doesn´t recognize anything at all.
    The network status says that airport is turned on but it is not connected to any network.
    It`s clearly a problem with my computer, not the network, can anyone help?
    Regards
    Rodrigo

    Rod1, Welcome to the discussion area!
    Verify that the antenna wire is still properly connected to the AirPort card. It may have come loose.
    If you have an iBook G4 you can use the photos in KB 108039, Properly attaching the antenna on an AirPort Extreme Card to verify that the antenna wire is still properly connected to the AirPort Extreme card.

  • Windows did not detect any networking hardware, Windows 7, New Hard Drive

    Message "Windows did not detect any networking hardware"
    Satellite P505 S8980 Windows 7 Home Premium.
    I replaced the Toshiba 500 GB HD with 500 GB Seagate.
    Device Manager icon for any device with yellow exclamation mark,
    Click on "Update Driver".  Lan eNet details as follows:
    Antheo - R8132 PCI-E Fast Ethernet Controller (NDIS 6.20)
    Browse to the folder where the setup program has the driver...
    Message: "The best driver software is already installed."
    (But the yellow exclamation mark still harasses me.)
    --- Go to "Setup new connection" ---
    "Choose a connection option"
    Click on "Connect to the Internet"
    Response: "Windows did not detect networking hardware"
    As near as I can tell, that translates from error 0x8E5E0247
    I have this same error on other yellow exclamation marks respective of what kind of device it is.
    => To test my sanity, I put the old hard drive (same size) back in and except for the impact of slowness due to error retries, everything works okay.
    Note:
    Same issue (hardware not detected) for Video adapter and Audio.
    I bought new USB Wireless adapter to test, and the driver installed but not activated because "not digitally signed", and that same issue fits all the above hardware.  I down loaded them from Toshiba, and they are confirmed installed, but not accepted with digitally signed.  I have uninstalled and reinstalled with same results.
    Solved!
    Go to Solution.

    I'm discovering I am not as well as I thought... running on the  AF hard drive which was built with a copy drive from old format drive which was the product of system recovery disc set.
    Review for context: Advanced Function HDD
    Scenario that exposes harm caused by cloning data from 4K blocks drive to 512 bytes blocked drive (AF)
    Toshiba supplied Windows-7 System Restore Discs: to factory state
    Then I built the Windows-7 Repair  Disc... used later.
    Hard drive was replaced when it caused SMART warning at every system boot.
    Acronis was only utility that quickly detected problem (3 sectors had permanent read errors.) Active@Disk Image and Power Quest Drive Image (Ghost) did not detect the issue.
    I tried Seagate 500 GB and Western digital 500 GB HDD drives as copy target.
    That new drive would not boot: "Required source not found"
    Booted My newly created Windows-7 repair disc, and used to to fix startup.
    See images.
    That worked and then the ST9500423AS disc booted.
    Now... next day I discovered Window Update is not working.
    I get message:
    Windows Update cannot currently check for updates, because the service is not running. You need to restart your computer.
    I ran Microsoft Fixit for updates.  It says it fixed two items.
    I still have the problem.
    The service shows "started"
    Control Panel/ ACTION Center/ Maintenance/ Check for Updates
     "No action needed"
     "Windows Update does not require any action"
    I checked  Update History...
    ... It is empty, else window is vacant... blank.
    Soooo..... for a sanity check, I swap out hard drive; go back to the old format (which is the one I copied).
    It works!  7 updates to install, including SP1... but I did NOT install them.
    Switch back to the AF drive... Update doesn't work. I am broke again.
    Is this another strange problem caused by the Advance Format issue?
    What to do?
    By the way... I did install an Intel storage Matrix driver  update, but I do not have RAID chip, so that driver is not for me... unless I missed out on something.
    Carl

  • Windows did not detect any networking hardware iMac 27' 2013 model

    Installed windows 7 using bootcamp now when I go to connect to a network it says windows did not detect any networking hardware

    Did you install the windows drivers as well?

  • My iPhone 4S is not preforming any network related operations after 5.0.1 update - please help!

    My iPhone 4S is not preforming any network related (Calls, Messages) operations after 5.0.1 update - please help!

    5.0.2 has not been released, thus you can not upgrade.
    Stedman

  • Hello everyone,   I just updated my 3GS from iOS 5.0.0 to 5.0.1   Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.   I tried restarting the phone se

    Hello everyone,
    I just updated my 3GS from iOS 5.0.0 to 5.0.1
    Since the update, Itunes says that no SIM card is detected, and the iPhone says that it cannot be activated. It also obviously does not detect any network.
    I tried restarting the phone several times, removing the SIM card several times, but it did not change anything, the SIM is still not detected.

    You do not need to keep posting the same thing over and over again.
    Look to the right side of this page at "more Like this" or do a forum search.

  • IPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

    iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

    iPhone 4S wifi is gray and will not find any networks or move. I have hard reset network reset and safari reset. All other devices in my house connect to wifi. Any suggestions other than the 3 that do not work.

  • After latest security update my MacBook is not finding any network. My network is ok, iPad and iPhone have no problems, but laptop is for all practical purposes turned into typing machine. Has somebody encountered similar problem? What to do?

    After latest security update my MacBook is not finding any network and I think is not really turning wifi on. Has anyone encountered similar problem?

    Checked the older discussion of the same type and found solution, well kind of... Thanks to other people who tried it, I just cannot remember their names at the moment. So, the solution for me was to turn off the firewall in the system preferences and suddenly lo and behold there was my network.

  • TS1398 My iphone 4 will not show any networks, when there is wifi, what do i do?

    I ordered my iphone 4 from ebay, and t is unlocked. its really new but fror some reason will NOT connect to wifi. it wont even show other networks when there is wifi. any solutions to my problem??

    I have this Exact same issue, I bought it from a friend though, and it will not show any networks to choose while I am at home and my computer and other phones are connecting perfectly to my wifi. I have tried to reset the network settings, I just restored the whole phone when I transferred my info to it. If anyone knows of anything else please advise.

Maybe you are looking for

  • Oracle 10g Enterprise Manager Console bug?

    I think I have come across a bug in the Oracle 10g Enterprise Manager Console. If I go into my database, then into the schema, select your schema from the list, then tables. Now once your in your tables, find one that you know of and know fairly well

  • Can I use my Apple TV as an WLAN Access Point?

    In my Basement I have a LAN Connection but no WIFI and no Cellular. Therefore I would highly appreciate if I could use connect my iPad via WLAN with the Apple TV and to get Internet access which is routed thru the Apple TV. So I am looking forward fo

  • Copying files using .csv as reference columns as reference

    I have a 30000 line CSV file that references different calls in different folders a full path than a file name that I need to copy the files to an other location the CSV has a few columns I had to concatenate 2 for the full path .. one column is name

  • Date format in smart form

    How can we change the date format in a smart form.

  • COPA - SD - Rebates accrual & Credit memo

    We have rebates accrual posting from SD- Dr. Rebate A/c (PL) 1000 - this would also been in COPA Cr. Rebate accrual (BS) 1000 Now you settle the rebate(credit memo) - say you decide to settle for 1200 At this point the system will do the following en