Wi-fi not working even after phone reset to factory settings

My wi-fi was not working anywhere so someone at the Apple store reset my phone to factory settings and the wifi is still not working. It says Unable To Join Network when I try to join a wifi network.

I've been having problems myself since 1.1.2. I have to constantly turn off WiFi and then turn it back on again before it will find my home network, even when I'm standing right in front of it. I never had this problem with 1.1.1
I wish Apple would put in some actual features with the updates instead of just trying to one-up the hackers and screw up everything else on the system. I am glad to finally have my custom (non-financially-extorted) ringtones back though. Now, if I could have my ringtones AND working WiFi...

Similar Messages

Iphone 4 front camera not working even after reboot,resets and restore.

i am using iphone 4 .I have problem that front camera is not working even after reboot,resets and restore with itunes.I thing there is a hardware problem.
Now i wont to go apple store for replace the phone because phone is under warranty period.But problem is that i lost the receipt.Will apple store help me without my receipt ?please help me

If setting up as new device without using the latest backup does not bring the camera function back, get it looked at or serviced by Apple:
How to back up your data and set up as a new device
Apple - Support - Service Answer Center

Touch screen in not working even after Hard Reset

My Palm Treo 750 stopped working and responding suddenly........i tried a soft rest which didn't worked i then tried hard reset but in both cases the device boots and screen pops up "Tap the Screen to Start The Device". However this is the point where my device hangs up even after resetting it several times. I have also downloaded reset software from the palm website but unfortunately it only runs/works from palm device. i have installed microsoft active sync from the palm CD and my device is detected and syncronized using USB cable which prbably shows it doesnot have a hardware issue.
Post relates to: Treo 750 (AT&T)

Remove any screen protecters or cases, then hard reset again. If the problem continues then it will need to be repaired or replaced.
Post relates to: None

Email Hyperlinks not Working even after LaunchServices Reset

Had a pretty bad crash recently resulting in having to purchase and set-up a new hard drive on my G4. Did a clean install of system software then went through all the updates and was able to restore my applications, etc. from my daily back-ups.
Most things are back to normal ... except my Mail, which is somewhat funky. One thing that's no longer working are hyperlinks in email bodies. I can't simply click on them to go the the url. I have already reset the launch services files as instructed in the X Lab (http://thexlab.com/faqs/resetlaunchservices.html). Also tried doing that through Cocktail, the utility program I have.
Nothing seems to be working. Any thoughts?

I would start by doing this:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.0 for Tiger, and 4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Then download and install AppleJack 1.5 from VersionTracker or MacUpdate. Read its instructions carefully then use it to perform some essential maintenance routines.
Let's see how that goes.

All iPad buttons are not working even after resetting it (hard, soft and via iTunes).

All iPad 2 buttons are not working even after I resetting it. I tried both of the hard and soft reset, and even resetting my iPad via iTunes.
The volume buttons work after I tried this method : "hold iPad in landscape mode. Push the home button while rotating it to Portrait mode, release it."

I have the same issue, nothing I did fixed the problem, I would suggest if you can visit apple store and give us your feedback with them.
for me I can't go to apple store because I don't have any store near me, I will have to wait for 2 months to travel!

Ipod touch screen not working even after resetting to factory specs

ipod touch screen not working even after resetting to factory spec. lock symbol appears at top

That indicates you have a hardware problem. An appointment at the Genius Bar of an Apple store is in order.

Social App not working even after update from noki...

nokia n8 social loading feeds.
My wife and i have the same problem now, only last week she said my phone will not work on facebook the widget on main home screen will not load feeds at all, and the widget is now blank saying refresh all the time, so i linked the phone up to the computer and did a scan for new updates with nokia updater which you can download from nokia site.
Its now the 4th jan and the phones still will not work even after and update from a socail app,
nothing , facebook will load after a few pushes, and looks like its loading till it says loading feeds then it says the (wording unable to load news feeds)

Uninstall the social app and reboot your phone. Then go to software updates and reinstall from the offering given in the updates. I've uninstalled and reinstalled social twice and it has worked both times.
blitZkid
Nokia C7: Running on Nokia Belle
"If I'm helpful in anyway, a click of appreciation on the star would be nice"

The g, h and backspace on my keyboard are not working even after replacing with a new one.

The g, h and backspace on my keyboard are not working even after replacing with a new one. I have also updated my BIOS still d same. Please help me ASAP.
...am waiting for a QIUCK RESPONSE

How does a usb keyboard attached externally work?
You might try a "hard reset" where you remove battery and AC charger, hold down power button 20-30 seconds and then reassemble and turn on. Reset BIOS (F10) to default settings, too.

HT5622 Why is my Apple ID or password not working anymore after I reset my password?

Why is my Apple ID or password not working anymore after I reset my password?
It keep asking my password... I have reset it, then, when I enter the new password, it's not accepted...

Perform a Reset... Try again...
Reset ( No Data will be Lost )
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time...
Wait for the Apple logo to Appear...
Usually takes about 15 - 20 Seconds... ( But can take Longer...)
Release the Buttons...

Webcam is not working even after I reinstall the system software

My webcam is not working even after I reinstall the system software.
My questions are follows:
Should I bring it to repair or get a external webcam?
At approximately how much would be cost for repair?
Which webcam I should get?
Thank you very much!
Tian

Update, I fixed it although it feels more like a workaround. I had to enable the extension in extension manager. That still left a blank panel, but once I closed and reopened the panel I was prompted to login. Seems that closing and reopening the panel is the fix once it is enabled.

Window 10 upgrade. Graphics driver not working even after re-install

Notebook pavilion DV6 3280. Just upgraded to Windows 10 and AMD graphics driver not working even after re-install. What do I do? Is there another driver not on the HP Website that I should try?

Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.

After a reset to factory settings iPad, does not activate Incrrect Apple ID or Password although it right, please help

After a reset to factory settings iPad, does not activate Incrrect Apple ID or Password although it right, please help

You have to enter the Apple ID and password. You are running into the Activation Lock
iCloud: Find My iPhone Activation Lock in iOS 7
Is there a way to find my Apple ID Name if I can't remember it?
Yes. Visit My Apple ID and click Find your Apple ID. See Finding your Apple ID if you'd like more information.
How do I change or recover a forgotten Apple ID Password?
If you've forgotten your Apple ID Password or want to change it, go to My Apple ID and follow the instructions. SeeChanging your Apple ID password if you'd like more information.

My macbook pro is slow / freezing even after going back to factory settings

my mac book pro is slow even after going back to factory settings.....
What do i do next its driving me insane!
its 2010 macbook pro running mountain lion
- cpu is peaking with just a single web page open
- laptop is pretty hot
- cant watch any films or online videos
- cursor is lagging on screen
- disc usage is 5% / 95% free!
- system memory = half free, so 2gb out of full 4gb i have
If anyone has any ideas of whats possibly wrong please let me know ur thoughts
Am beginging to think its possibly damage to my harddrive now

Start with a SMC reset:
http://support.apple.com/kb/ht3964
Run an Apple hardware test.
http://support.apple.com/kb/ht1509
You may have to use OPTION D to start it.
Take a look at Activity Monitor, set to 'All Processes' for possible clues.
Look at these two user tips:
https://discussions.apple.com/docs/DOC-3521
https://discussions.apple.com/docs/DOC-3353
Ciao.

Touchpad does not work even after format - x220t

Hi there,
I've had my X220 tablet for about 10 months and it has been great. For the last month however, the touchpad and touchpoint have become flaky. When rebooted or coming out of standby, the touchpoint/touchpad often did not work; after resetting a few times, i would work, but then stop working again when the system when into standby mode.
I thought this was a driver issue, but uninstalling and reinstalling to the newest drivers did nothing. I have also updated/reset the BIOS.
I have more recently have not been able to get the touchpad working at all now and relying on just the touchscreen for input is very frustrating.
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
I read around a bit and have tried disabling JUST the touchpad in the BIOS, and amazingly, the touchpoint will work fine when I do that. When I disable just the touchpoint or leaving both enabled, neither the touchpad or touchpoint will work.
As far as I can tell from what I have been able to diagnose, the touchpad is damaged and is causing a conflict with the touchpoint when enabled. I am not sure of this, but it is my belief now.
Are there solutions out there for me? I do have 2 months left on my warranty, but I hope to keep mailing my notebook in for support as a last resort.
thank you,
steve

xyster wrote:
When Windows 8 CP came out this week, I decided to give the computer a fresh format and reinstall Windows --- maybe that would resolve the issue. No luck. The touchpoint/touchpad did not work even in Windows 8.
If you are ready to reinstall Windows, try this method:
http://forums.lenovo.com/t5/X-Series-Tablet-ThinkPad-Laptops/My-X220t-Clean-Install-Method/td-p/6612...
If after that your trackpoint/touchpad still don't work, I think one of them (or both) is defective.
X220t | i7 | 320GB HDD | 8GB RAM | WIN7 PRO
IdeaCenter A520 | i5 | 1 TB HDD | 6GB RAM | WIN8.1

MacBook Keys not working even after KeyBoard Firmware update

My friend's sister bought me a MacBook from the US last October. Fortunately, Apple announced the release of Leopard also on the same month and I got a free upgrade to leopard. I installed leopard about 3 months back. My keyboard was working fine when I had Tiger installed. After I installed Leopard, I remember installing a Keyboard firmware update once through the Software Update.
About two three weeks back, my MacBook started acting wierd. Some keys were not working (mostly 't', 'q', left shift, left command, zero which is not working even now. I couldn't close the last bracket because the key is not working. I am a php programmer and I can't think of living without the closing bracket and zero keys . But most of the keys works on and off.
After seeing on several sites that it is a problem with firmware, I once again downloaded the firware update, but couldn't install it since the installation wizard says that my system doesn't need it.
Can someone plz tell me what to do now? Will reinstalling help?
Thanks in advance.

The problem persists everytime I restart my system or wake it up from sleep. But each time different keys have problem. I am now downloading update 10.5.4. Can someone plz help me?

Wi-fi not working even after phone reset to factory settings

Similar Messages

Maybe you are looking for