Wi-FI - Not working - no networks appearing

Hi
I have a big issue here with my iphone 3g 3.0.1
basically no networks are being recognized by the Wi-Fi.
tried at home, at the office, at the starsucks with no luck.
My friend has the exact same device, and we verified in the same place with the same settings, and the his phone works, so it's not a network or router issue.
already tried:
- pushing home and power button until the apple.
- can't use static ip address as there's no netwok available.
- reset network settings.
- reset all iphone settings and erased data
- activate deactivate 3g
- restore from itunes
I appreciate your help
P.D. tried calling my local support, they don't know what's a WiFi
tried contacting apple in the usa.. they told me that I need to pay for one time support or applecare.
I really appreciate your help.

Ooops - that's not a good sign. I would first restart the computer and then hold down the option key while accessing the Apple menu and select System Information... then go under Network>Wifi and see if you've a card installed:
Interfaces:
en1:
Card Type:    AirPort Extreme (0x14E4, 0xD6)
Firmware Version:    Broadcom BCM43xx 1.0 (5.106.98.100.16)
MAC Address:    68:a8:6d:52:c5:70
Locale:    FCC
Country Code:    US
Supported PHY Modes:    802.11 a/b/g/n
Supported Channels:    1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165
Wake On Wireless:    Supported
AirDrop:    Supported
Status:    Not Associated
Should look something like the above.
If you don't see a card, then somethings up with your hardware that can likely only be fixed (or at least diagnosed) by an Apple tech.
Good luck,
Clinton

Similar Messages

Maps app not working on Network Users

Maps app not working on network users on client machines?, is everyone having same issue?, Thanks in Advance

Sometimes it does, sometimes it does not. I assume we're talking about network users with home folders on a remote volume…
The only thing I could do about it was to inform Apple…

I have a iphone 5....it's model A1428 but it's not working 4G network...Help Me Please!

i have a iphone 5....it's model A1428 but it's not working 4G network...Help Me Please!

Hi rushandias,
Thanks for visiting Apple Support Communities.
The steps in this article can help with troubleshooting your cellular data connection:
iPhone: Troubleshooting a cellular data connection
http://support.apple.com/kb/ts3780
All the best,
Jeremy

I bought creative suite cs6 design standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged - none of the program items work at all. File size for installation seems very small for a product of this

I bought creative suite cs6 standard student and teacher edition and the download did not work properly - files appear incomplete/ or damaged. File size seems very small for a product of this size. Can you assist with download issue or provision of software ?

Lalalaladog where did you download CS6 from? I would recommend downloading the installation files for Creative Suite 6 Design Standard at Download CS6 products

ICloud for pages app not working on network users having home folder on Mac Mini Lion server

Does anyone know how to make iCloud for pages work on network users having home folder on server, having home folder on local Client iCloud for Pages works fine but when home folder is on Server iCloud for Pages app does not work. My Clients are Running Mountain Lion 10.8.2, my Server is a Mac Mini Lion Server.

Hi Tim,
No fix yet, my home folders reside on a thunderbolt external hard drive, I also tested having home folders on default server HD and no changes, I called Apple Support a while ago, they replicated the issue, it just does not work on network users, they did not say when will it be fix.
The version of Pages I am using is from the Apple Store.
Hector

Why does printer not work after network password changed?

I changed the password on my Airport Extreme (5th Gen) which is connected to an iMac,base, and now my HP Photosmart C4750 will not print. I have tried uninstalling/reinstalling the printer software using the original HP printer CD. The error message "The selected WI-Fi Network "network name" is not within the reach of the device." Do I have to change the password back in order for it to work on my wireless?
Appreciate any assistance.

Hi,
The software provided for Mountain Lion does not offer any wireless configuration, therefore it may not work well on the OS.
Connect the printer to the network through the EWS by following the steps below:
Step one: Restore the printer's network default settings
Touch the ATM button () next to Wireless / Scan .
Touch the ATM button () next to Wireless Menu
Touch the ATM button () next to Wireless Settings .
Use the up and down ATM buttons () to select Restore Network Defaults , and then press OK .
Touch the ATM button () next to Yes to confirm your selection.
Step two: create a temporary network connection with the printer to access its EWS
Click the Wi-Fi icon on your Mac.
Click on Join Other Networks.
Click on Show Networks.
Select the HPSETUP network and click on Connect
Allow 2-3 minutes to establish the connection.
Step three: Follow the Wireless Setup Wizard from teh EWS
Open Safari and click the Bookmarks icon, select Bonjour from that window
Note: if the Bonjour option is missing under the Bookmarks menu click on Safari > Preferences > Bookmarks and check the Bonjour box within the Collections section.
From Bonjour double click the C4750. the EWS appears.
Open the Networking tab.
Click on Wireless.
Click the Start Wizard button on the bottom right side of that screen and follow the steps to connect the printer to your network.
Once you are done, reconnect your Mac to your home network by following step two but selectng your home network.
Shlomi

SAP Mobile app Stock photo not work for network location

Hi Experts
I found if we use network location path (e.g.
servername\pic folder\) in SAP Business One General Settings -> Path, Picture Folder, then if we logon SAP B1 Mobile app from iPad/iPhone, and try to open stock photo, we will get error:
Processing Failed
Internal server error: contact your system administrator
It looks like it only work for local path, e.g C:\pic
Even we put path as :
local pc name\pic folder, it is also not work.
Any idea about this?
Thanks
Tim

The first link is a temporary fix for a machine that only one or two people will use. This will not fix the Library Machines that some 3000 users can use at anytime. I can not pre-add all these users every time we image a machine. We also loan out laptops and I need these machine to wirelessly login dynamically to the domain. But I also need these machine to allow access if these machine are removed from our campus and the wireless access is not available.
Thank again for the help and I hope someone at Apple can fix this soon. I going to have a hard time telling the client that thay can not use the OS that came with they're machine.

Satellite T210 - web camera is not working - cloud image appears

Hi,
My web camera (it is incorporated on my computer) is not working.
When I turn it on it appears a blue light (informing that it is connected) but it is not taking pictures or videos regardless I am using skype or I am just using the webcam without being on a specific program. Only appears a image with clouds!
Any suggestions?
Regards

Use please option effect in Web camera applications and click on tab called screen cover.
Be sure there is enabled option ON.
Please check it and post some feedback.

Both side print not working in network using windows 7

                           I have HP laserjet 1018 printer,Printer connected in windows 7 system.
          When i print both side print in same system is work done,but in network not work both side print,single print work good.i need help to solve this

Hi Dinesh_G,
Sorry for the delayed response. Try adding an alternate driver. Here is a link that will provide steps for that. Click Here Check which PCL driver you are currently using and add the alternate (PCL5/PCL6). Please see the below for additional clarification.
Utilize the above link for exact steps on adding the driver.
1. Check which driver currently used-PCL5 or PCL6-this will be located near name of driver in print folder or print properties
2. Follow steps provided in link to add whichever one the currently installed driver is using
     A. Select HP as manufactuer
     B. Select HP universal printing PCL 6 or HP universal printing PCL 5
3. Attempt duplex print job
Hope this helps!
Also, remember a click on the Kudos star to the left is a quick "Thanks" for a helpful post.
Please select the "Accept as Solution" button on the post that best answers your question.
I appreciate your input !
Thank You,
I work for HP.

Database not working when network is offline

I have installed Oracle 11gExpressEdition in my office laptop. It works fine if my laptop is connected with my office network and its not working outside office network. I am trying for long time to resolve this issue but couldn't able to find success.
I tried with changing Pcname in "C:\oraclexe\app\oracle\product\11.2.0\server\network\ADMIN\listener.ora" AND "tnsnames.ora" TO "localhost" and "127.0.0.1".
Installed Windown loopback adapter and reinstalled application. But nothing works.
Can you please help me
Thanks in Advance..

Thanks for your replay,
Add to my question, database instance is running and my application can able to connect to database only issue is the link using for management portal
http://127.0.0.1:8080/apex/f?p=4950
is not working showing "Cannot display the webpage".
Here is my listner.ora
SID_LIST_LISTENER =
(SID_LIST =
    (SID_DESC =
      (SID_NAME = XE)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
    (SID_DESC =
      (SID_NAME = PLSExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
    (SID_DESC =
      (SID_NAME = CLRExtProc)
      (ORACLE_HOME = C:\oraclexe\app\oracle\product\11.2.0\server)
      (PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
      (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
DEFAULT_SERVICE_LISTENER = (XE)
And tnsnames.ora
XE =
(DESCRIPTION =
    (ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
    (CONNECT_DATA =
      (SERVER = DEDICATED)
      (SERVICE_NAME = XE)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = PLSExtProc)
      (PRESENTATION = RO)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (CONNECT_DATA =
      (SID = CLRExtProc)
      (PRESENTATION = RO)

N73 ME not working in Network Mode GSM and Dual Mo...

Dear All,
I have N73 ME.
Firmware: V 4.0812.4.2.1
I am using Vodafone Line and I am living in egypt.
I have a problem with the network of the device. The device is working fine only with the Network Mode UMTS, but not working with GSM and Dual Mode, which makes it doesnot have network signal in many areas, while I have another Nokia 5200 phone whick works fine in these areas.
Is it a Software or Hardware problem?
and what is the solution for it?
Thanks in advance for your help.

moderator note:
please be informed that your personal and contact information, as well as the IMEI of your phone are not allowed to be posted in this board for security and privacy reasons.
thanks.

Imovie 10.0.4 does not work on network account

iMovie 10.0.4 works perfectly on local account but when logon with network account iMovie does not work.

Have you contacted your Network Administrator?
There is not nearly enough information for us to begin to help you.
ÇÇÇ

Primary network does not work, guest network does work

I updated the firmware on the Time Capsule, after which we had a power outage. When the Time Capsule came back up, after a bunch of fiddling around we discovered that although the primary network cannot connect the Internet through our phone system router, the guest network works fine. The primary network does not work with the guest network turned off. Resetting the Time Capsule had no effect.

After an entire day of messing around, we went into Airport Utility, selected Internet, selected DHCP, and changed DHCP Beginning Address to match the one showing on the guest network (172.16). Now the primary network can see the Internet.

IT DOES NOT WORK IN NETWORK (APEX + Oracle XE in XP)

Hi there!
I am beginner in Apex and Oracle XE. So I have met some trouble.
I have installed Oracle 10g XE to Windows XP. It was easy. Then I started DB home by url: http://127.0.0.1:8080/apex. It works. But my PC has Network card with persistent IP address 192.168.1.150. So I try to connect by url: http://192.168.1.150:8080/apex . It DOES not work. I switched off firewall. It does not work. Please give me some suggestion or advise how to solve it.
Thanks in advance.
Ulan

Ulan,
1) The XE discussion forum is at: Oracle Database Express Edition (XE)
2) Your specific problem is addressed here:
http://download-west.oracle.com/docs/cd/B25329_01/doc/admin.102/b25107/network.htm#BHCBCFBA
Joel

HP LaserJet P1005 Two-sided printing not working on network

Good day!
I have a desktop, with Windowx XP, to which my LaserJet P1005 is connected via USB. My wife has a laptop, with the same Windows XP, from which she can print, but the two-sided option does not work right. She can check it and print, but the window to restart printing for the second side does not open and there is nothing we can do at this point.
I have trie duninstalling the printer from both computers and reinstalling the newest drivers, it still won't work.
Thanks for your help!

I have an HP PhotoSmart 2575 All-in-One with the latest HP driver that displays the two-sided printing option greyed-out in the Layout window. According to HP, your printer must be capable of accepting an optional two-sided printer tray to work on a Mac. To me that is ludicrous since in Windows the driver supports manual two-sided printing.
To get around this, I select the Paper Handling window and from the Pages to Print drop-down list select Odd only instead of the default All Pages. After clicking the print button the odd pages print starting with the last page and ending with the first. I then remove all paper and reinsert the printed pages with the top of the page facing the printer. First, though, I reorder the pages with the first page on the bottom and the last page on top. If the total number of pages is an odd number, I remove the last page from the inserted stack, as that is the very last printed page. I then select Even only from the Pages to Print drop-down list and click print again.
Problem solved.

Wi-FI - Not working - no networks appearing

Similar Messages

Maybe you are looking for