Wi fi not working - permanently switched off

Hi
My Wi fi is not working - button is on permenant "off"

Being under "Mobile Network" you would think it wouldn't affect it but it does.  In order to use wifi you have to have Data Services turned on.  It's always been this way...
JC
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

  • Macbook battery not working - computer switching off - help!

    My Macbook has suddenly started switching off when the power supply is disconnected, even though the battery should be charged.
    This happened after buying a new macbook AC adaptor. My old 60watt adaptor has been getting quite hot, so I did a bit of reading on the web and bought a new 85watt adaptor, which is supposed to resolve the problem. I bought one off ebay - had no idea what I doing really so may have bought a dodgy one? It was £30 which I've been told (now!) is suspiciously cheap! I plugged it in once and all seemed fine then when I removed the magsafe adaptor for a moment my computer just sort of died, well, switched off. I now can't restart it from the battery at all. It works fine with the adaptor (I'm using my old 60watt one again now.) In the moment before I remove my adaptor, the battery looks 'fully charged' then just switches off.
    I tried downloading BatteryUpdate 1.2 but it has made no difference.
    What have I done?? Can it be fixed? Please help!
    PS. Here is my info from the 'power' section within 'About This Mac':
    Battery Information:
    Battery Installed: Yes
    First low level warning: No
    Full Charge Capacity (mAh): 4146
    Remaining Capacity (mAh): 4146
    Amperage (mA): 0
    Voltage (mV): 12592
    Cycle Count: 236
    AC Charger Information:
    Connected: Yes
    Charging: No

    yea just made an appointment right now. kind of upset that this has happened. long time mac user and really haven't had issues with hardware. just can't wait to get my macbook working again! thanks again.

  • Fan is not working.. switching off automatically every 10 mins

    fan is not working.. wat to do...my lapi is switing off after every 10 mins

    Hi there ,
    I would be happy to assist you. As there are many models of HP Notebooks, I would need the model number.
    How Do I Find My Model Number or Product Number? This will help me find the specifications for your specific HP Pavilion Notebook and what the part number is for the proper fan. If you need more immediate assistance or would like to speak to someone about a fan replacement, please use the following link to create yourself a case number, then call and it may help speed up the call process:
    Step 1. Open link: www.hp.com/contacthp/Step 2. Enter Product number or select to auto detect
    Step 3. Scroll down to "Still need help? Complete the form to select your contact options"
    Step 4. Scroll down and click on: HP contact options - click on Get phone number
    Case number and phone number appear.
    They will be happy to assist you immediately.
    Thanks.

  • Myiphone is not working or swicth off only see apple symbol

    my iphone 5s not working or switch off only see apple symbol and blank screen

    4 basic troubleshootings steps, did you tried any of it?
    Restart / Reset
    http://support.apple.com/en-us/HT201559
    Restore from backup
    Restore as new
    http://support.apple.com/en-us/HT201252

  • TS3048 Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Even after installing new batteries and switching it on my magic mouse does not work. Sometimes it works but switches off (indicator light goes off) on its own after a few minutes.

    Try resetting the PRAM and SMC.  Try making the device a favorite .
    Barry

  • IPhone speaker does not work when switching call to hands free option

    having problems with IPhone speaker, not working when switching phone calls to speaker mode, any suggestion?

    Same problem - I was on the phone last night and the speaker switched off and can't figure out what happened. I tried to reset the phone, no sound is working.  I can hear a phone call if I hold it up to my ear. Very frustrating as my phone is less than 3 months old. Tracy

  • IPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.

    iPhone 4s Voice mail notification not working after switching from Verizon to PagePlus.  How can I get the notifications working?

    Contact your carrier - voicemail, and visual voicemail, is a carrier feature.

  • I lost all my notes after having switched off in icloud: how to recover them from a back up pls ?

    I lost all my notes after having switched off in icloud: how to recover them from a back up pls ?

    Just turn notes syncing back on again.

  • T400: Internet does not work when switching networks unless reboot?

    Hi everyone,
    I can't seem to establish an internet connection when I switch networks (e.g., internet at work, then at home). It gives me an error saying "limited connectivity" or failed to renew IP. This happens for both wired and wireless connections. 
    I tried turning off the firewall (comodo internet security) along with the windows firewall. I tried letting windows handle all my internet connections. Yet the error still happens. So I just have to simply reboot my laptop, and everything works 100%. 
    I never had an issue like this with other laptops. Could this possibly have something to do with some of the bundled Lenovo software? I disabled most (if not all) of them since I barely use them. 
    Thanks for your help.  This is my 1st thinkpad, and I'm enjoying it so far. 

    Hi gatorman1122,
    I had a similar problem with my T400.  What wifi card do you have installed?
    I had an Intel 5300.  Networking was OK with XP Pro installed, but messed up with either Vista Ultimate 32-bit or Vista Business 64-bit installed.  All were Lenovo OS images.  I tried 2 different 5300s.
    I only saw the problem with wifi, but basically if I changed access points or changed from wired to wireless, the first attempt to use the (new) access point would fail to get an address.  An immediate reboot would cause it to succeed.
    I finally got the issue escalated to a 2nd-tier tech.  He sent me a 5100 to try. That fixed it.  I doubt it is a hardware issue.  It is most likely a Vista/Intel/Lenovo software issue/conflict.  IMNSHO, ThinkPad wifi w/Vista is a mess.  One of the most fundamental laptop features should work much better than this.  Many folks have T-series wifi problems and Lenovo seems to be ignoring it.
    Just to add to the excitement, I told a friend buying two new T400s to order 5100s to avoid the problem.  He did, and got the machines with XP installed.  They both exhibited the same bad behavior    Once he updated XP and all the Lenovo stuff, they started to work OK and have stayed OK.  Grrrr.....
    Z.
    The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc.  The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • Trackpoint does not work after switching from the tablet to laptop mode.

    I use my tablet to run a smartboard. Sometimes when I switch to the tablet mode and back by reversing the display, the trackpoint and mouse keys stop working. The touchpad below it still works. I am running windows 7. I have gone into the control panel, under mouse, and both the trackpoint and touchpad are still both checked. ?? When I restart the functions return.

    Hi Remaxjoe,
    Welcome to Lenovo Community Forums!
    I’m really sorry to hear that trackpoint is not working properly in your Lenovo system.
    I would suggest you to download the Ultranav drivers for your system and install it.
    Below is the link to enter downloads page and install the Ultranav driver.
    •             Support Drivers & Software downloads
    Please click on "QUICK PATH”, enter your system model and select the exact model depending on the MTM number of your device.
    Spoiler (Highlight to read)
    You can refer here for further information.
    Hope this helps!
    Best regards,
    Mithun.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follow @LenovoForums on Twitter!

  • LASER JET 1022N NOT PRINTING SINCE SWITCH OFF

    THERE WAS A LARGE PRINT RUN SET UP IN ERROR AND THE PRINTER WAS SWITCHED OFF TO STOP THE PRINTING AS THE REQUEST HAD CLEARED THE COMPUTOR CONTROLS IN PRINT. NOW THE RED LIGHT FLASHES AND NO PRINT, I HAVE BEEN UNABLE TO CLEAR THE MEMORY. THE PLUG AND NETWORK CABLE HAS BEEN DISCONECTED, COMPUTORS HAVE BEEN REBOOTED BUT IT MAKES NO DIFFERENCE. OTHER PRINT REQUESTS DO NOT TRIGGER OFF A RESPONSE. THE RED LIGHT STILL FLASHES.
    HELP WOULD BE APPRECIATED
    JOHN
    3 SEPT 09

    Let's set a static IP address for the printer:
    - Print a Network Config Page from the front of the printer. Note the printer's IP address.
    - Type that IP address into a browser to reveal the printer's internal settings.
    - Choose the Networking tab, then Wireless along the left side, then the IPv4 tab.
    - On this screen you want to set a Manual IP. You need to set an IP address outside the range that the router automatically sets (called the DHCP range). You can find the DHCP range of the router using its internal settings page or in its manual. Use the CD that came with your router or type the router's IP address (ends in .1) into a browser.
    - Use 255.255.255.0 for the subnet (unless you know it is different, if so, use that)
    - Enter your router's IP (on the Network Config Page) for the gateway and first DNS. Leave the second one blank.
    - Click 'Apply'.
    Now, shut down the router and printer, start the router, wait, then start the printer.
    After this you may need to redo 'Add a Printer' using the new IP address.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Imac 20" just stopped working - just switches off

    Hi I'm running an imac 20" intel and its about a year old - I've had no problems with it until now - I installed ilife 08 last week and also added a 4 port USB extender cable but it worked ok for a few days after.....Now it has suddenly started turning itself off and I have to unplug the power cable before turning on again and even then it starts to boot and then switches off........fortunately I backed everything up the first time it did it but is it the power cable or a computer issue? I'm in Singapore...
    Thanks for the help
    I'm running OSX Tiger and am fully updated.

    my imac does the same thing. have you gotten any resolution to this? I have had my mac only working first 2 months after i bought it.been sitting in box in closet now for over a year. Because it just "stopped working" . turns on -get the apple screen then click -off. help if u got any.

  • Users changing 'open with:' not working/permanent

    We have an issue with 'open with:' (within get info options) not permanently remembering any changes.
    We have Lion Server set up as OD and when users login any PDF or EPS files are set to open using Preview, users then change this via 'get info' to 'open with:' (change all) Acrobat and iIlustrator. But, this only works for the present session. If they move to another mac or a mac is restarted, the options revert back to Preview, not a permanently change to Acrobat and illustrator.
    Does anyone know how to fix this?

    We have now changed to a new Server running ML Server and still having the same problems, is there no-one who knows how to solve this??? 

  • Keys won't work and switches off

    Hi,
    Suddenly today my curve stopped working. The keys will not work and it turns itself off. The rollerball still works though but you can not use it to select.
    I have read a couple of incidences like this on other forums but no solution.
    Does anyone know what causes this?

    Routinely the keys not working is the first symptom of moisture damage. Even in your bathroom during a steamy shower can cause this.
    http://www.blackberryfaq.com/index.php/Got_Your_BlackBerry_Wet%3F
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Not recording when switch off "camera sounds" option

    Hi,
    When i switch off the option in french "Désactiver le
    bruit de l'appareil photo" (switch off camera sounds ?) so the
    "clictch" camera sound each time a new picture is take, .. then
    Captivate don't captivate anything.. i just have the first image
    and that's all... !
    Using this "clitch" sounds is absolutly not professional for
    the purpose we should do !!
    with the export problem, we are not really happy of this new
    version of Captivate for now !!

    Hi cyborgjeff
    Unless you are recording your narration at the same time as
    your main movie (which is not best practice, but to each his/her
    own) you won't hear the shutter sound in your resulting movie. Did
    you double-check to ensure you have the "Enable auto-recording"
    check box selected?
    Cheers... Rick

Maybe you are looking for