Wi-Fi problem, bars full and says connected but can't load any webpages
The only difference between now and before it stopped working is that i installed active directory+DNS on windows server 2012 through Hyper-V for a school assignment :/ ever since i did that my Wi-Fi just failed, it says connected but when i try to
open a web page it can't connect and on the network and sharing center it says unidentified network.
I have an ASUS K55A
Please help i'm kinda panicking at the moment :(
Windows IP Configuration
Host Name . . . . . . . . . . . . : PotatoPC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
WINS Proxy Enabled. . . . . . . . : No
DNS Suffix Search List. . . . . . : router
Ethernet adapter vEthernet (Naar LAN):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #3
Physical Address. . . . . . . . . : 00-15-5D-82-01-01
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::a0e0:82a2:d151:d4d7%22(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.212.215(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 754980189
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-6F-D6-98-6C-71-D9-1A-84-30
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter vEthernet (Naar WAN):
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Hyper-V Virtual Ethernet Adapter #2
Physical Address. . . . . . . . . : 6C-71-D9-1A-84-30
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::9c6c:874c:b0d6:84a5%20(Preferred)
Autoconfiguration IPv4 Address. . : 169.254.132.165(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.0.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 611086809
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-6F-D6-98-6C-71-D9-1A-84-30
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Wireless LAN adapter Local Area Connection* 11:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft Wi-Fi Direct Virtual Adapter
Physical Address. . . . . . . . . : 1E-71-D9-1A-84-30
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Ethernet adapter Local Area Connection 2:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet8
Physical Address. . . . . . . . . : 00-50-56-C0-00-08
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::c75:199d:5ca5:1513%6(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.130.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 234901590
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-6F-D6-98-6C-71-D9-1A-84-30
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : VMware Virtual Ethernet Adapter for VMnet1
Physical Address. . . . . . . . . : 00-50-56-C0-00-01
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::302d:20c6:65b2:dacc%5(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.232.1(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . :
DHCPv6 IAID . . . . . . . . . . . : 587223126
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-6F-D6-98-6C-71-D9-1A-84-30
DNS Servers . . . . . . . . . . . : fec0:0:0:ffff::1%1
fec0:0:0:ffff::2%1
fec0:0:0:ffff::3%1
NetBIOS over Tcpip. . . . . . . . : Enabled
Ethernet adapter Ethernet Laptop:
Connection-specific DNS Suffix . : router
Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller
Physical Address. . . . . . . . . : 08-60-6E-17-B2-9C
DHCP Enabled. . . . . . . . . . . : Yes
Autoconfiguration Enabled . . . . : Yes
Link-local IPv6 Address . . . . . : fe80::8851:c7a0:341c:dd7b%4(Preferred)
IPv4 Address. . . . . . . . . . . : 192.168.23.100(Preferred)
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Lease Obtained. . . . . . . . . . : 05 April 2014 01:48:06
Lease Expires . . . . . . . . . . : 06 April 2014 02:34:15
Default Gateway . . . . . . . . . : 192.168.23.1
DHCP Server . . . . . . . . . . . : 192.168.23.1
DHCPv6 IAID . . . . . . . . . . . : 352870510
DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-18-6F-D6-98-6C-71-D9-1A-84-30
DNS Servers . . . . . . . . . . . : 192.168.23.1
NetBIOS over Tcpip. . . . . . . . : Enabled
Tunnel adapter isatap.{7CC3DC87-F04E-45C7-A747-06E42EDA8AFB}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #9
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{F7C1B95D-C61C-4D99-B951-9937771A3295}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{59DD6945-963E-4D1D-BD89-8F33C97B3D7A}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #4
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.router:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . : router
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #8
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Tunnel adapter isatap.{7FC3B082-E50D-4B68-A3DC-DD20532527B7}:
Media State . . . . . . . . . . . : Media disconnected
Connection-specific DNS Suffix . :
Description . . . . . . . . . . . : Microsoft ISATAP Adapter #10
Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0
DHCP Enabled. . . . . . . . . . . : No
Autoconfiguration Enabled . . . . : Yes
Hi,
Have you configure a DHCP role on your Virtual machine? To consider the DHCP conflicts issue, please first disable it or give it a pool limitation.
Then, let's check the DHCP client on your Windows 8.1 computer, if the status is stopped, please manually start it to check the results:
After that, please try to renew a ip address on your computer:
ipconfig /release
ipconfig /renew
Can we get this issue fixed?
If not, please post back the event below for our research:
Kate Li
TechNet Community Support
Similar Messages
-
Hi everybody,
I have Imac 5 processor and I guess installed Lion I am having difficulty with Wifi connection. Sometimes after shut down number of times still does not access wifi or if it does I can see wifi bar on iMac but can't open any webpage. Please help
ThanksHello:
There was an OS X 10.7 update released a month or so ago that fixed this problem. Run software update.
Barry -
I had an update message on my phone and I clicked yes to update. Now the phone has a picture of itunes and usb connection, but can't be used. itunes says I have to restore my phone, but will lose all the data. Is there anything else I can do? I really don't want to lose all my pictures and other data.
It's in recovery mode. There is nothing left on the phone at all. If you didn't back it up before you started, your data is gone.
you have no choice but to restore at this point. -
4s is disabled and says "connect to itunes" is there ANY way to get the data off??
in a nutshell ...
1. i had a 4S
2. screen broke
3. bought new 5c
4. BUT sprint couldnt transfer data from 4S b/c i couldnt swipe my passcode in b/c screen was broken
5. i was annoyed b/c i had photos/videos/notes that i wanted
6. only contacts were on cloud
7. fast forward 3 months, my very thoughtful girlfriend got my screen repaired
8. ONLY i couldnt remember the passcode!!!! after like a ton of tries my iphone is disabled and says connect to itunes
9. i have never synced w/itunes but tried anyway
10. i tunes said couldnt read data b/c phone was locked; enter passcode!!! but DUH i cant enter it b/c it's disabled
11. i fear the only thing i can do is restore, which i believe erases all data ...
is there anyway to put my sim card in an iphone 4 to get the pictures (mainly) off? or like an adapter to read SIM from a laptop? or sprint store??
thanks!!Place the iOS device in Recovery Mode and then connect to your computer and restore via iTunes. The iPod will be erased.
iOS: Wrong passcode results in red disabled screen
If recovery mode does not work try DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings -
Wifi says connected but can't connect to internet, email etc
my ipad wifi says it's connected but can't get internet, email etc.
Lincoln82-
Try unplugging your WiFi router for a few seconds. Then reset the iPad network. Go to Settings-General-Reset-Reset Network Settings. You will need to reconnect to the WiFi.
Fred -
Skype works, but can't load any websites via Chrome,Firefox and Safari
I am on Lion and I have been facing this issue since a week now.
I have 2 laptops connecting to the same wifi router. The other laptop is running Windows and browsers are able to load websites without any problem on that. But on my mac, I can run Skype, but browsers dont load any websites. Even I cant operate the Mail application, it opens but doesnt download any emails.
Since Skype is working I am sure the internet and my wifi are fine. I am guessing there is some issue with DNS. Am I correct ?
Although I dont know what to check to confirm whats wrong and how to rectify this problem. Has anyone faced and solved similar issue before?mail would fail if the mail client is trying to resolve the mail server ie: mail.yourdomain.com
if you want to test dns you can
open a terminal>
nslookup www.apple.com
and to test dns via google public dns
nslookup www.apple.com 8.8.8.8 -
Airport Card finds network and says connected but won't let me on internet!
My airport is on and finds a network, shows full strength of signal (like it's done for the past 8 months). But it has stopped letting me onto the internet. Safari and Mail hang and say they are not connected. If I go ahead and plug the ethernet cable in (from same network) it starts up fine. I live in a hotel and have done the same thing for 8 months, why today would it start doing this? Can anyone help. This is my first mac and I haven't the foggiest how to deal with this. I've turned airport off, restarted, turned it back on etc. It always finds a signal and says it's ready, but won't let me onto the internet. Thanks for any help you have.
Is the internet service also password protected? (As in, do you need a password for both the wireless and for the internet connection?) If so, then when you run the "assist me" option you should set up a PPP connection. That's my situation but I still have problems with it remembering my settings after rebooting or disconnecting...
-
I just hooked up my Apple TV - it is all connected correctly- when my wifi comes up on my tv screen i click and select it. It then says it is "connected" , but it is not as is it has not asked for the password for my wifi. I have turned it all off and back on, I have restarted it as well. I do know why it will not ask for my password - am I missing something?
It will not ask after it is already connected. Is ATV working? Can you connect to the iTunes store, Netflix, etc?
-
Imac wi-fi, it says I have a connection but can't get any internet access
Hi All,
Help please, just got a new iPad air and trying to use the Wi-Fi function on the iMac to access internet on the iPad. Used to be able to do this on previous tablet but now iMac won't wi-fi any of my devices- including new iPad. All devices and iMac say there is a connection but when I open internet apps it tells me there is no connection. Have reset iPad, turned wi-fi on/off, turned internet sharing on/off everything! Think the problem is the iMac, can anyone suggest a solution?
CheersI have checked the network in the system preference. The Built-In-Ethernet has a green light beside it and says "Built-In-Ethernet is currently active and has the IP address (bunch of numbers). You are connected to the Internet via Built-In-Ethernet."
When I click on "Assist me" and then "Diagnostics", The Network Diagnostics screen pops up and Scans for a while. There's five tabs on the left. Built-In-Ethernet is green, Network Settings is Green, and ISP is green. After scanning for a while, the tab by Internet goes red and says Failed below it, and the tab by Server goes red and says Failed below it. Then it asks me "Have you ever used this computer to successfully connect to the internet?" I say yes, and then it asks for the network port configuration that I would like to use. I choose Built-In-Ethernet, and it scans for a while and tells me "This computer appears to have a working internet connection, but cannot find www.apple.com. You may have typed the address incorrectly.
My neighbor has a wireless network that is unsecured. I use it all the time on my ipod touch. My imac finds it, connects to it, but I still have the same problem. No browser or mail will work.
Message was edited by: thescamdog -
Ipad apps are greyed and say waiting, but can open them from app button
The apps were reloaded after the ipad was reset, but only about 1/3 loaded. The rest are grey, and say "waiting" under them. In the app icon, they all show up as loaded, and can be opened, but from the home screen, nothing happens when the app is tapped.
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
How to Solve the Problem of An iPad App Download Stuck on “Waiting”
http://ipadacademy.com/2012/06/how-to-solve-the-problem-of-an-ipad-app-download- stuck-on-waiting
How To Get Rid Of Your iPad App Download Frozen Problem
http://www.sidelineapple.com/how-to-get-rid-of-your-ipad-app-download-frozen-pro blem-and-not-lose-years-of-your-life-video/
iTunes: How to resume interrupted iTunes Store downloads
http://support.apple.com/kb/ht1725
Another thing to try - Turn the iPad Off & then back ON.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
I can't load apps because my Ipod says that i need iSO4.3 operating system in order to do this. How do i get this on my ipod? Thanks
Your only way is if you have the version that was compatible on your computer such as in the recycle bin/trash or in a computer file backup. In that case delete the current version that is in your iTunes App library and replace it with the older version. Then sync.
Also see:
Recover Older Versions of iPhone Apps After Updating — Apple News, Tips and Reviews
Many developers when they updated their apps to support iOS 5 and 6 dropped compatibility for iOS 4.2.1 and earlier. -
I have a connection, but can't get any internet or email
I have two macs. The new one suddenly won't open any internet pages or email. I can't use Safari or Firefox or my mail. The old G4 cube on the same cable modem is having no problems at all. I called my ISP, and everything is fine from their end, and they can see my IP address and it matches what they have, so all should be working. On the imac, it says I have an internet connection, gives me an IP address, and claims I'm connected. But when I open Safari or Firefox or my mail, I get nothing.
Any suggestions?I have checked the network in the system preference. The Built-In-Ethernet has a green light beside it and says "Built-In-Ethernet is currently active and has the IP address (bunch of numbers). You are connected to the Internet via Built-In-Ethernet."
When I click on "Assist me" and then "Diagnostics", The Network Diagnostics screen pops up and Scans for a while. There's five tabs on the left. Built-In-Ethernet is green, Network Settings is Green, and ISP is green. After scanning for a while, the tab by Internet goes red and says Failed below it, and the tab by Server goes red and says Failed below it. Then it asks me "Have you ever used this computer to successfully connect to the internet?" I say yes, and then it asks for the network port configuration that I would like to use. I choose Built-In-Ethernet, and it scans for a while and tells me "This computer appears to have a working internet connection, but cannot find www.apple.com. You may have typed the address incorrectly.
My neighbor has a wireless network that is unsecured. I use it all the time on my ipod touch. My imac finds it, connects to it, but I still have the same problem. No browser or mail will work.
Message was edited by: thescamdog -
Internet connected but can't access any websites
Hi everyone,
I have wireless and my computer was working totally fine this morning. I didn't download any updates or anything and when I came home this afternoon it said that my computer was connected to the internet but when I try to open any webpages in Safari is just says that it is trying to load the page but never actually does. MSN messenger will not work either. Does anyone have any idea how I can fix this?? I know it is not the internet because our PC on the same network is working fine. Thanks in advance!
P.S. Not completely sure of my OS, still kinda new to Macs.journey778, Welcome to the discussion area!
Your system information states OS 10.0.x. If you are using that version of OS X you do not have an Intel based iMac. I would suggest that you upgrade to OS 10.2 at least.
If you do have an Intel based iMac, you may want to try renewing the DHCP lease. Open System Preferences->Ethernet->Advanced... and click on the "Renew DHCP Lease". -
I transfered my pc to my Mac but I can't see any pictures or music mi iTunes library is empy! What can I do?
1 - iPhoto never forces you to upgrade - any upgrade of the software is initiated by you
2 - what version of iPhoto did you have? What version did you upgrade to? What version of the OS do you have?
3 - what exactly happens when you launch iPhoto?
4 - with no backup it is just a matter of time until you lose all of yoru files including your photos - thing do happen and with no backup you are 100% guarenteed to lose everyhing sooner or later
as a wild guess backup, depress the option and command keys, launch iPhoto and rebuild your iPhoto library database
LN -
My iphone 4 says disabled and "connect to iTunes", i dont know if i want to reset it. If i take it in to the Apple store, will they have to reset my iphone indefinetley??
Please turn off your caps lock.
All caps indicates shouting, is considered rude and is difficult to read. Many will not read such posts.
If you are unable to restore your iphone then try this:
iOS: Unable to update or restore
Maybe you are looking for
-
I am trying to connect my Macbook pro 2010 to my Samsung HDTV using a mini display port to hdtv cable. Trying to play a slide show in IPhoto but I only get sound with no picture. Does anyone have any suggestions?
-
I am trying to create a cluster between my i5 iMac and my MBP. I am following the instructions in the manual but when i get the the last part, after creating a cluster where I am supposed to drag service nodes in from the bottom of the Apple Qadminis
-
JMS sender adapter : message type null is unknown, payload cannot be read
Hello, We are building a scenario Weblogic -> PI through a JMS adapter, but we are getting the following error in the adapter : 2009-09-29 12:09:58 Information New JMS message with JMS message ID ID:P<450046.1254218997063.0> received. The XI
-
How does a Intel Pentium 4 running Solaris 8 compare in performance to a new Sun Blade 100. I already have installed in a old pentium just for fun. Now I want to try something a bit bigger...
-
Need Interactive Report EBiz 11.5.9 inventory tables and views over DB Link
I need to create an Interactive report on this SQL: select glcc.segment4 as ENTITY_CODE , glcc.segment2 as DEPARTMENT_NUMBER , glcc.segment1 as Account , ai.VENDOR_NUMBER as VENDOR_NUMBER , ai.VENDOR_NAME as VENDOR_NAME , aiv