Wi-Fi profiles not following priority

Hello everybody,
Short version: Wi-Fi profiles don't follow the priority order, it remains connected to the lowest priority network even though higher priority ones are available.
Every day on my way home, my BlackBerry Bold 9700 connects to an open Wi-Fi network close to my home. Then when I come home, the berry is still connected to this network and will not automatically connect to my home Wi-Fi network.
The open Wi-Fi network can still be reached from my home, but with a very poor signal compared to my home Wi-Fi network that has a super strong signal.
I have profiles for both, and the open network is on the bottom of the priority list, and my home network is on top of the list, however, the berry doesn't switch to my network unless I connect to the profile manually or reboot the berry.
This is very annoying. I didn't have this problem in OS 5, but now I am on OS 6 and every time I come home I need to change the network manually. I was wondering if anyone was experiencing the same problem as me and if there are any solutions or workarounds. Thanks!

Hello Siegried,
I would
suggest removing the connections with a poor signal from your profiles and set your home profile as the
first one in the list, the BlackBerry Wi-Fi connections will connect based
on priority set in your Wi-Fi options.
Thank you.
-HB
Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

Similar Messages

Re : EDI: Partner profile not available

Hi
while i am transfering material master i am getting the following error
' EDI: Partner profile not available'
How to solve

Hi,
First check the change pointers configuration for matmas and then check configuration part for that partner.
Check these threads for complete information on Change Pointers:
Change pointers
what are change pointers
Regards,
Raju.

IDOC is Getting Fail with - 56 Status EDI Partner profile not available

Hi,
I am trying to Post invoice Data into IDOC on ECC Side.
My Scenario is File u2013 XI u2013 ECC(IDOC).
But It is Getting Fail with 56 Status u201C EDI: Partner profile not available u201C
On Control record I am getting this
Port                      BLANKKKKKKKKKK
Partner Number              CLNTDEC110      Logical system for Client
Partn.Type       LS                    Logical system
Function                                  BLANKKKKKKKKKK
Port                            SAPDPI
Partner number             CLNTSAMPLE
Partn.Type                      LS         Logical system
Partner Role                   BLANKKKKKKKKKK
My configurations are Like this :----
On ECC Side MY SID is DEC
On ECC side I have two logical system in CLNTDPI100 for PI
                         CLNTDEC110 for ECC.
I have Partner profile on ECC system on CLNTDPI100 logical system    - we20
Added message type in inbound side of partner Profile (INVOIC-INVOIC02)
ON SAP PI/ XI System MY SID is DPI
IDX 1 has Port name SAPDEC
On Message mapping EDI_DC40 is mapping with constants with below given value
<INVOIC02>
   <IDOC BEGIN="">
      <EDI_DC40 SEGMENT="">
         <TABNAM> </TABNAM>
         <DIRECT>2</DIRECT>
         <IDOCTYP> </IDOCTYP>
         <MESTYP>INVOIC</MESTYP>
         <SNDPOR>SAPDPI</SNDPOR>
         <SNDPRT>LS</SNDPRT>
         <SNDPRN>CLNTDPI100</SNDPRN>
         <RCVPOR>SAPDEC</RCVPOR>
         <RCVPRT>LS</RCVPRT>
         <RCVPRN>CLNTDEC110</RCVPRN>
      </EDI_DC40>
Regards
PS

Check the following :
in We 02 which partner number is displayed just in the posted IDOC -> 2nd coloum in the IDOC list .and verify if the
same you have in Partner profile. Actually this details comes from ECC business system's logical system name which you give in SLD.
in we 19 - take the error iDOC numner and open the IDOC ->click on the first line -> check entries as you mentioned
above sender port should be PI port not empty.you need to check the partner profiles properly
follow these steps
1. create a RFC destination of tyoe H for Pi system- 2. create a Port and assigen the RFC destination to it
3 create logical system for PI BD54 PICLNT001 say , 4 with the same name create a partner profile in We20
    in parter profile maintain the inbbound message parameters and add the PI port as receiver port in it .Give the basic type also .
now
for sender details in ur case PI : u have port (defined in PI IDX1),patner number (LS defined in ECC PICLNT001), parter type LS.
for receiver you have port defined (as above), partner number the logical system for ECC system.
in we 19 ,, edit the control record as above and go to the tab inbound processing and test the internal posting
it should work fine. in the adapte specific attribuet for receiver ECC system , maitain the same LS name , if any wrong entry is
there then change the LS in sld to poing to correct LS/
refer this
http://www.riyaz.net/blog/xipi-settings-in-r3-partner-system-to-receive-idocs/technology/sap/26/
Regards,
Srinivas

IDOC:Patner profile not available.

Hi,
I am new to IDOC.Can some one help me resolve teh following error mesage returned by the IDOC.
"EDI: Patner Profile not aavailable".How should I go about configuring the same.
In my requirement,an input file will be made available and sending and recieving sytems are the same.
Please help me fix this issue.
Thanks in advance

hi
use below links..
Partner Profile.
Re: Partner Profile for IDOC - configuration.
hope this will help u .

"error no:58" partner profile not maintained in idoc.

Hi to all,
i am new member to this site already searched forums for solution.
can anyone help us out to solve the following error while simulating inbound idoc.Error:58 " partner profile not maintained"
we tried with msg type CREMAS and DEBMAS.created partner profiles,rfc connection as procedural but same error results.
also give some useful links to process idocs.
we want ur valuable suggestions,thanks in advance.
regards
vinoth

Hi,
link for inbound idocs is given below
[http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm|http://help.sap.com/saphelp_46c/helpdata/en/78/2174b051ce11d189570000e829fbbd/content.htm]
[http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli|http://sapdocs.info/sap/abap/idoc-useful-notes/http://www.scribd.com/doc/24447/SAP-R3-IDoc-Cookbook-for-EDI-and-Interfaces-by-Axel-Angeli]
[http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-ii/]
[http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/|http://www.riyaz.net/blog/beginners-guide-to-ale-and-idocs-part-iii/]
Please check in the receiver side if the partner profile is configured correctly.
Go through the link below in order to maintain partner profile.
[http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm|http://help.sap.com/saphelp_nw04/helpdata/en/dc/6b80b543d711d1893e0000e8323c4f/content.htm]

EDI: Partner profile not available

Hi,
We have performed a client copy on the source system.
In RSA, source system check, errors occurred:
The following errors occurred in the source system: RSAR 374
EDI: Partner profile not available E0 332
Entry in inbound table not found E0 414
Entry in outbound table not found E0 400
In WE20, I click on the partner profile, check ok.
Pls assist.

Hi,
Try restore from context menu of the source system, this would recreate the partner profile entries.
regards,
Pruthvi R

EDI: Partner profile not available R/3 -- XI

Hallo,
when I send an IDoc-Message from R/3 to XI, I get following error:
"EDI: Partner profile not available" (transaction we05)
I have created the partner profiles in we20, but there are not available.
What could be the reason of this error?
I have created in XI a logical system "SAPR3" (transaction bd54) and I have assigned it the idoc-inbound-parameter (transaction we20). also the logical system of the business system "R3System" in the "adapter specific identifications" is "SAPR3".
So, is the "partner no name" of the idoc from the sender-system (r3) the reason? in transaction we05, it is called WMS.
Thanks in advance.
regards
Stefan

<<You need to set Outbound parameters.
<<Inbound parameters are set in case of XI to R/3 scenario
The sap-documentation (HowTo_IDOC_XI_Scenarios.pdf) says, that you should create a partner-profile in R3 with outbound-parameters and that you should create a partner-profile in XI with inbound-parameters for the direction r3 --> xi
Is this wrong?
following informations are from transaction we05 in XI:
recipient information
port:
partner number: XI
partner type: LS
function:
sender information
port: sapi4711
partner number: WMS
partner type: LS
partner role:
Which of them should I create as logical system in transaction bd54 (XI)?
Which of them should I use for partner no. in transaction we20 (XI)?
Should I create outbound or inbound-parameters?
Thanks.
Regards
Stefan

Error while posting Inbound Idocs-"EDI: Partner profile not available"

Hi,
I am getting the error "EDI: Partner profile not available" Status -56 while creating inboud Idocs.
I have done the following steps so far
1.Created IDOC basic Type and Message Type. (Custom)
2. Created process code to process the IDOC.
3. Use the FM IDOC_INBOUND_WRITE_TO_DB to create the inbound IDOC.
4. Use the FM IDOC_START_INBOUND to process the IDOC.
Is ther anything else that i have to do inorder to post the idoc sucessfully.
Thanks in advance
-Nishant
Edited by: nishant patel on Nov 13, 2009 10:35 AM
Edited by: nishant patel on Nov 13, 2009 10:41 AM

Hi,
Check in WE20 if the partner profile is configured for the idoc type and the message type. That might be the cause of the error.
Also make sure the same partner profile details are sent to the control record. Partner profile details are stored in the table EDP13.
Hope this helps
Regards
Shiva

Status profile not allowed for object type

hi
i had created a status profile (for having 2 statuses before production order release) and assigned in the order type.
but while creating the production order i receive the following error.
Message no - CO622
status profile not allowed for object type
please provide your inputs
regards
Ramesh

Ramesh,
once you cerate a Status profile in BS02 and add status to the same. in the tollbar you will see OBJECT TYPE push button, select teh obejcts like PP/PM order header / operation /comepeoent and PRT ect where that staus can be applied.
Then assign the statsu profile to order type.

ESS Record working time error "Profile not initialised" TS31000007

Hi,
This is with reference to approvals of Times in ESS . I have copied the task TS31000004 to my custom task. I have made a custom rule to determine the superior in the Z task i have created.
Wehn i try to assign the Z task created to the Data entry profile in the "with approval" section( *** use sap business workflow *** ) , it gives me an error "Profile not initialised" . If i remove the check box for "Use SAP Business workflow" and do not enter any task there, the record working time screen is shown in ESS.
Any idea why it is giving the "Profile not initalised" when i assign the workflow in data entry profile.
Your help is apprecaited.
Regards
PN
Message was edited by:
Portal Newbie

Hi Haydn,
I have check the wokflow through CAT2 in SAP R3. When i save the CATS record, it send a workflow task to the superiror identified through by custom rule.
If i try it through front end ESS, the same is not working and is throwing "PROFILE_NOT_INITIALIZED" error.
I have down the following
1) Copy the standard task TS31000004 to ZTS31000004
2) Assigned it as general task, assigned the custom rule in Default rules for agen determination
3) Assigned the Task in Data entry profile, checked the box "Use SAP Business workflow" in data entry profile.
4) In Portal i have registered the UWL system, note i am not getting the ZTS31000004 in UWL xml file.
Do i need to ADD the new ZTS31000004 in SWFVISU and delete the standard TS31000004 provided and re-register system ?
also do i need to create the events in SWETYPV for this Tasks as they are not present there?
Your help is appreciated.
Regards
PN
Message was edited by:
Portal Newbie

Netctl-auto Is Not Observing Priority

I have been using netctl with a single profile for the past few months without issue. My universities network offers a (much faster) WPA network in addition to a (more available) guest network. I am trying to configure netctl-auto to connect to these profiles using the Priority parameter in the profiles. I have set Priority=100 for WPA and Priority=75 for the guest network. Whenever I reboot my machine the guest network is selected and activated by netctl-auto even though the priority is set to use WPA.
Would anyone have any insight as to why the priority is being ignored?

I am having a similar issue, and would like to have a fix. I have 3 competing profiles, two guest networks and one eduroam. The first two profiles are simple, set up pretty much exactly as examples/wireless-open, and have Priority=1 and =2, respectively. The eduroam account contains a WPAConfigSection, and has Priority=3. Netctl-auto will not ahdere to these priorities. In order to start eduroam, I need to “netctl-auto disable” both guest profiles.

Planning Proposal - Transport.plan.pnt from data profile not considered!

Dear Gurus,
When clicking on the Planning Proposal to manage my deliveries I have the following 2 messages of error:
1- Transport.plan.pnt from data profile not considered!
2- Shipment type from data profile not considered!
What does that mean and how can I modify this situation
Many thanks in advance for your help
Chris

Closed

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

I have consolidate my folders related to the video I am in the progress of working on. Premiere elements does not follow their new location. How do I syn them back up all at once so premiere doesn't ask me for their location when I open the project

This is the Photoshop Elements forum, not the Premiere Elements forum, located here:
https://forums.adobe.com/community/premiere_elements
When you open the project, it should ask you where the first file is located. After you tell it where it is, it should be able to find the rest of them if they are located near the first one. Then save the file. If you move the files again, you will have to relink them again.

Report Does Not Follow Select Column Order

Hi all,
Apex 2.2 on 10gXE
I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
Is there a fix/patch or alternative tips for this bug?
Thanks a lot,
Edited by: 843228 on May 24, 2011 10:32 PM

Apex 2.2 on 10gXEStart by upgrading from this old unsupported version.
>
I always encounter this problem, the display column on report does not follow the select column sequence order in the "region source".
It is very tedious clicking the up/down arrow one-by-one in the "report attributes" especially if the display columns are plenty like 40 columns.
Is there a fix/patch or alternative tips for this bug?
>
This is not a bug. APEX maintains the original column order of the report. This avoids problems downstream in areas like the processing of <tt>g_fnn</tt> arrays in declarative tabular forms, where the assigned arrays are column-order dependent.
APEX 4.x fixes column ordering bugs that could lead to report corruption, and includes drag-and-drop column ordering in the new tree view in addition to the up/down arrow re-ordering.
If you really want column order to follow that in the source query, the workaround is to create a new report using the modified query.

Is there a way to select a document that contains a word not followed by a particular word in full text?

I have a table named Documents that has Content field full text indexed
Now i need to create a query in such a way that the query should return docs that have at least one word "hello" that does not have word "world" following it.
--sth like
select content from documents
where contains(Content,N'hello(not followed by word "world")')
And the result should be
"hello" -- since this does not have world following hello in it"
"hello friend and hello world" -- this document has word hello that is not followed by world it it"
Can a full text query be formulated in a way to achieve above results? If so how?? I want to avoid parsing Content manually as much possible as I can.

Hi Mokchhya,
According to your description, the issue regards SQL Server Search, I will help you move the question on the related forums, and It is appropriate and more experts will assist you.
In addition, I do a test. If you want to get the results which contains ‘hello’ characters and not contains’ world’ characters. I recommend you use NOT on any boolean expression. For example, if you create full test catalog and full test index. When you
need to find the document records who has “hello” in their content, and does not have “ world” in content, CONTAINS( ) is takes one keyword to match with the records.
select * from <database>.<schema>.<table>
where contains (Name, 'hello') and not contains (Name, 'world')
For more information, see:
http://blog.sqlauthority.com/2008/09/05/sql-server-creating-full-text-catalog-and-index/
if you don’t use full text search, you can use Like with wildcarding to scan a column. For example,
;With cte As
(select * from <database>.<schema>.<table>
Where name like ‘hello%’
select * from cte
where name not like ‘%world’
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Wi-Fi profiles not following priority

Similar Messages

Maybe you are looking for