Wi-Fi Sharing doesn't work together with mini Display port
Hello everyone!
I can tell you fantstic problem. Sorry for my English - i'm from Russia!
The problem:
1. Share Wi-Fi via bonjour to other devices such as iPad, iPhone, windows computers, etc. I'm using Mac os X Snow Leopard! Everything is fine!
2. Just only I plugging hdmi/dvi adapter - INTERNET STOPS TO WORK!!!
It looks like fantastic. If just I plugging-off remote monitor! Internet works fine! If only turn on! - It doesn't work!
Can You only believe???
When you plug remote monitor or plasma TV via mini display port - Wi-Fi sharing is not working!!!
I try to solwe this problem about 1 year - and found this forum. Nobody on internet ask this question!!!
How can I solw this problem????
My assumptions that minidisplay port and bonjour for wi-fi sharing using the same port and mini dispay have more priority!!!
But it strange - why nobody in internet ask this question!
Thanks! I'm waiting for you answer!
P.S: Equipment
Название модели: MacBook Pro
Идентификатор модели: MacBookPro7,1
Имя процессора: Intel Core 2 Duo
Скорость процессора: 2.4 ГГц
Количество процессоров: 1
Общее количество ядер: 2
Кэш 2-го уровня: 3 МБ
Память: 6 ГБ
Частота шины: 1.07 ГГц
Версия Boot ROM: MBP71.0039.B0B
Версия SMC (система): 1.62f6
Серийный номер (система): 34017YB6ATM
UUID аппаратного обеспечения: FB8005A6-CA65-55AE-8695-49DDA4825BD9
Сенсор внезапного движения:
Состояние: Включен
Snow Leopard !!!
Yes, I actually checked that it was 7.1.2 Not sure when they released it, but I had been trying to get this to work all last night.
But I did try something new...I had set restrictions for my son in Settings. If I turn "off" all restrictions, the app will load properly and bring me to Netflix sign in.
Do you know what Restiction settings would prevent Netflix from loading? I naturally want to lock down the iPad so that my son can not surf explicit websites or install, delete, and in-app purchase. I did add Netflix to approved list though.
Thanks.
Similar Messages
-
I am trying to connect a 24" cinema display with mini display port cable to a 24" imac with a displayport - is there a cable for this as these two connections are two different sizes
Hi Gilly,
I have no proof, but I think it will not work with an adapter, only Mini Display Port or Thunderbolt. -
Mac monitor with mini display port to a pc with HDMI port
How do I attach my mac monitor with mini display port to a pc HDMI port?
If your display port does not support audio you need an adapter like this one
http://www.startech.com/AV/Displayport-Converters/Mini-DisplayPort-to-HDMI-Adapt er-with-USB-Audio~MDP2HDMIUSBA -
Connecting Cinema Display with mini display port to macbook pro with thunderbolt port
I am trying to connect a 27" cinema display (2010) that has a mini display port cable out of the back, into my macbook pro (2013) with thunderbolt ports. The mini display port cord fits into the thunderbolt port on the Macbook Pro, however the macbook pro does not detect the cinema display and the cinema display does not have any picture on the screen. The USB plugs in fine and sound comes out, and I have the adapter for the magsafe to magsafe 2 and that works fine, it just the actual display. Any help would be appreciated!
Thanks!Hello mmholt,
Welcome to Apple Support Communities.
It sounds like there’s no video on an Apple Cinema Display that’s connected to your MacBook Pro, and you’re wondering if the configuration is supported. It is supported, take a look at the article linked below for more information.
Thunderbolt ports and displays: Frequently asked questions (FAQ) - Apple Support
1. Can I connect a Mini DisplayPort monitor or monitor using a Mini DisplayPort adapter to a Thunderbolt port on my Thunderbolt-equipped Mac?
Yes. A Mini DisplayPort display or a display connecting with a Mini DisplayPort to VGA, DVI, or HDMI adapter will work just like it was connecting to a Mini DisplayPort connector when plugging in directly to the Thunderbolt connector on your Apple computer. Click here for more information on Mini DisplayPort connections and adapters.
Also, this article provides a lot of great information and troubleshooting tips that will resolve most issues related to video external displays.
Apple computers: Troubleshooting issues with video on internal or external displays - Apple Support
So long,
-Jason -
MacBook Pro(Mid 2012) Can't connect to my Dynex TV with mini display port to VGA adapter
I have a MacBook Pro(Mid 2012, running OS X 10.9.4) and I recently just bought a mini display port to VGA adapter so I could hook it up to my dynex TV but when I connect everything my TV says no signal. Do I need to do something in settings?
Hi psikalis,
If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
- Brenden -
Screen sharing doesn't work on headless mini
I have a headless Mac Mini that has been running 10.5 and 10.6 for years and I've never had any problems with screen sharing.
I now update to Lion and as soon as there's no screen attached I can no longer use Screen Sharing!
There is absolutely no way I can have a screen perminently attached to the machine.
Any ideas of how to fix this behaviour?
I've tried rebooting with no screen attached and that just hung the server at boot time.I've found a work around.
Connect the screen and then connect to the machine via Screen Sharing
Then change Screen Sharing from Hardware display to Virtual display.
Then you can disconnect the screen and Screen Sharing continues to work. (At least so far) -
30'' Cinema Display with mini-display-port to dual link DVI adapter usb hub
Hi all, I don't know if any one of you experience this issue and can help me.
I am using an unibody macbook pro (late2008 model) to connect to a 30'' cinema display via the famous $100 mini diaplay port to dual link DVI adapter. I have connected the usb cable from the ACD to the adapter and the usb cable of the adapter to my macbook pro. This setting works fine under OSX 10.5.7.
When I am using Windows Vista under bootcamp the USB hub on the back of the ACD doesn't work. The device manager of Vista shows an excalmatory mark besides the device "Generic usb hub"; and it reports a problem of "the device cannot be started".
I doubted this problem is due to Windows cannot recognise the $100 adapter as a "generic usb hub"; and apple has not release a driver for this $100 adapter for windows.
Since my MBP only has 2 usb ports and the $100 adapter already occupied one, it would be very much helpful if the usb hub of the ACD can work just like in OSX. Can anyone think of any suggestion?
Much appreciated for reading this post and thank you.i don't have an answer for you, but i feel your pain. very frustrating when this happens with Apple products and Vista/Bootcamp. wish they were more compatible, for it would make things so much easier for the consumer.
-
I have a 27" Imac.i7 with mini displayport and MBP13 i5 with thunderbolt port. Some time ago I tried to connect my old MBP with miniDP to The 27"iMac I Failed so did the apple centre they refunded cable costs and said I'd be contacted by Cupertino. That was 9 months ago, now replaced MBP with 13 inch(**** I can use my iMac as display!). Does not work phoned Fast Lane very helpful guy called JIM emailed me some software/firmware update links. Still no display linking. One of the links was for a couple of updates for a TBp equiped 27" iMac mine is only MDp equiped. Failing to find any MDp updates in apple support. Anyone have any Ideas! My lad has a later 27"i5 he uses Xbox 360 no problem on his but it wont look at my MBP.
Beginning to feel like some of the kit that went with a fully loaded 5500 worked eventually. Computer and FM radio, Photography kit fine, video capture audio capture forget it. Too many crashes and resets made it impractical.Check discussion from Linc Davis on this thread
Problems with Preview
Similarly preview hangs opening files -
How can I use my ADC apple cinema display on my iMac 2006 with mini display port?
I got this new screen on eBay for £20 and its an old ADC display and to my annoyance I found there isn't a way to hook it up to my iMac with a mini dvi port . So I was wondering if there is a work around that the community has come up with or if its just best to sell it ( bearing in mind that the next best screen from apple that I know will work is around £80 on eBay)
Thanks, JonnyYou would need a DVI to ADC adapter, image below, search Ebay to find one in your area.
-
Cisco 3925 doesn't work together with TC
From my provider I got a new modem/router. The cisco 3925. Via this router directly I came almost to 48Mbps. When I put the TC between it I get not higher then around 5 to 7Mbps.
TC is in bridge mode and both 2.4 and 5Ghz are active.
Can anybody help me what goes wrong here.
Thanks.
MartienFirstly if the TC is within warranty ring and get Apple support involved, as frankly I doubt we are going to be able to crack it.
Sometimes there are actually issues with the TC and needs to be replaced.
How old is the TC and exactly what model is it? The A number stamped in the rubber mat will tell us enough.
What firmware is it running? If it was running 7.6 before, flash back to 7.5.2 which is a whole lot less buggy.
If the issue was not happening before, then the TC is not happy with the Cisco.. does the cisco have gigabit ethernet LAN ports? Did you test with another ethernet cable? Did you make sure it is connecting at gigabit.. the TC is useless and shows nothing but the Cisco might.
I would like you to do a couple of tests.. to find where the issue is.
Copy a file from your Mac to another computer on your own network, both connected by ethernet. See what speed you get LAN to LAN. This is to make sure the issue is only with LAN to WAN transfer.
Place a switch .. fast ethernet is fine.. ie 100mbit between the TC and Cisco, to see if the issue is link speed.
I have to warn you.. in the end most people who have listed the problem have just given up.. bought a new router (not apple) and bridged the TC and use it purely for wireless and backups.
If the cisco is a router, don't even worry about it.. just bridge the TC and use it for backups only. -
XFX R7850 with mini display ports, yet 27" ACD will not work
I know i need files from boot camp but don't know what i need.
I know i need files from boot camp but don't know what i need.
-
Problems with Mini Display port to VGA Adapter (A1307)
This has never worked, at the moment of truth, when we plug in, in front of client. SOmetimes their tech guys fiddle with display settings etc, but to no joy. So, a) should it just work straight way with no changes to settings etc and b) how do I know it is even properly functioning? Is there any troubleshooting I can do at home (without a projector!), or a sequence of things I need to do when I plug in to projector? Any help is gratefully received! Or do i just throw myself on the mercy of the guys at the apple store? Thanks
Hi psikalis,
If you are having issues connecting an external display to your MacBook Pro, you may find the information and troubleshooting steps in the following articles helpful:
OS X Mavericks: Connect multiple displays to your Mac
http://support.apple.com/kb/PH13814
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Regards,
- Brenden -
Mac Pro with Mini Display Port
Hi all, I want to add a second display to my Mac Pro. I use it for music production and having a second screen to tweak plugins, monitor the mixer. etc. would be very helpfil.
IS there any kind soul who's recommend 1) a good display (for looking for a huge one) and advise as to the right connections (mini-DVI to VGA adaptor, or whatever_ and anything else I may need? Thanks.I used a 30" Dell called the 3008WFP for a while and was pretty happy with it.
http://accessories.us.dell.com/sna/products/Monitors/productdetail.aspx?c=us&l=e n&s=dhs&cs=19&sku=223-4890
One nice thing about it is it can be driven directly from a Mini DisplayPort output without need of an adapter of any kind using a cable like this:
http://www.monoprice.com/products/product.asp?cid=102&cp_id=10246&cs_id=1024606&pid=6008&seq=1&format=2
My only complaint about the Dell was that the out-of-box color presets were terrible. But I was able to fiddle with it and bring it more in line with my expectations. Perhaps color isn't too important to you given your application. -
Allowfullscreen & wmode="transparent" doesn't work together
allowfullscreen & wmode="transparent" doesn't work
together with IE 6.0, fullscreen doesn't work
anyone know why??"NutsyNalinda" <[email protected]> a
écrit dans le message de
news: fr7tga$34r$[email protected]..
> allowfullscreen & wmode="transparent" doesn't work
together with IE 6.0,
> fullscreen doesn't work
> anyone know why??
Update your Flash Player
"Full-screen mode was not originally supported if the wmode
is opaque or
transparent windowless, but it is now supported starting with
the latest
Flash Player 9 Update on Adobe Labs. If the user has multiple
monitors,
Flash Player uses a metric to determine the monitor that
contains the
greatest portion of the Flash movie and then goes full-screen
in that main
monitor."
http://www.adobe.com/devnet/flashplayer/articles/full_screen_mode_print.html
lea -
Mini Display Port to Dual Link DVI Does Not Work Right
Somebody said here that this was an isolated problem. Well, I just got my new MacBook Pro 15", used the adapter to hook to the 30" Dell monitor, and it works a few minutes, then the screen distorts.
Count me among the isolated problems- it is beginning not to look isolated.
Now, do I wait on Apple to fix the problem, or do I return the MacBook Pro while still in the return period?Hi, Matt, and welcome to Apple Discussions.
The Matrox Support only told me that the new MacBook Pro with Mini Display Port is not supported, but as it's working for 2x1680x1050 with the Dual-Link DVI adapter, I was wondering if the Mini Display Port to Dual-Link DVI Adapter could be the problem.
I suspect that what Matrox Support meant when they said "not supported" was, in fact, "not supported": i.e., they've tried it and it doesn't work satisfactorily. You've tried it too, and found that to be true. Now you just need to come to terms with the fact. Matrox is quite open about it; it's not a secret. See the 9400M/9600MGT MacBook Pro entry in this compatibility table from Matrox's web site:
http://www.matrox.com/graphics/en/support/compatibility/gxm/resolutions/
Maybe you are looking for
-
How can I shorten the "Open With" menu?
Hi - When I Control-Click on a file, say one with an HTML extension, and move down to "Open with" I see a list of about 24 apps - only 4 of which are of interest to me for opening this HTML file. If I right-click an XML file - the apps I'm looking
-
Dear All I have a requirement, Generally payments terms from customer master will flow to sales order. but here my requirement is to get a different payment terms based on specific distribution channel, division, customer and plant those are there i
-
XI: How to update the Message Status (shown by transaction SXMB_MONI )
Hi My question might be stupid, but I need you help. I would like to know how can I update the message status what we see while using trasaction SXMB_MONI . The Scenrio is, I have a Custom Interface program build on the Abap Proxy interface metho
-
All of the sudden, when I open iphoto, the options below the menus: file, edit, photos, share, view, are almost all gray. I cannot see my photos anywhere, nor can I do anything IN the program. In other words, it is as if everything is happening off s
-
Hello Guys, iam migrating open standing sales order using LSMW standard object bapi_salesorder_createfromdata2.i just want to confirm from you experts whether iam using correct standard object and also i would like to know the difference between sale