Wi-Fi signal/connection fluctuation

When I connect to my wi-fi at home, the touch connects with full signal and everything works fine. However after about 2 minutes the connection bar drops to the lowest and safari etc. wont load. About 5 minutes after that it will reconnect with full signal again, and this just happens over and over. I don't have the new software, and i cant see why this would be.

Mine was doing that the other night. I have no idea why and it did stop after a few minutes. No errors on the router either. My best guess would be a router close by broadcasting on the same channel as your home network.
You can power cycle your router and see if that helps.

Similar Messages

  • The 5.1 update is causing my WiFi signal to fluctuate between 2 and 3 bars

    The 5.1 update is causing my WiFi signal to fluctuate between 2 and 3 bars.  I am 15 foot from my router, and never had this problem.  I have a 4s phone.  Anyone else having this problem?

    The wifi signal strength indicator was one of the changes according to the list:
    http://en.wikipedia.org/wiki/IPhone_OS_version_history
    If your actual connection speed is about the same, I wouldn't worry too much about the indicator.

  • E2500 - Weak signal that fluctuates from weak to nonexistant

    This router is really easy to set up but requires a ton of tweaking to get any sort of decent performance out of.
    Even with these tweaks the signal is very weak. My old WRT54G had a stronger 2.4ghz signal than the E2500 produces.
    Sitting one room away from the router and the signal is very weak. Forget being across the house. The WRT54G could cover almost the entire house with a network connection wirelessly, this thing can barely get a signal outside the room it sits in (same room the WRT54G was in).
    What's great about it: Easy to set up
    What's not so great: Weak signal that fluctuates from weak to nonexistant
    This product has...
    Unreliable connection
    Short range
    slow connection
    About me...
    Technology guru
    Gamer
    No, I would not recommend this to a friend.
    I use it in...:Large home

    The performance of your new router depends on various factors apart from the router itself. The wireless devices in your network, are they wireless G or wireless N devices? If they're wireless G devices, you won't really see any difference, and in fact any N devices in your network would also suffer because of that. Apart from that, placement of the router also matters.
     Avoid keeping the router in a corner or under the table or something like that. Ideally you'd want to keep it at a higher location. The signal always travels better from a higher location to a lower location. Apart from this, you can also change channels on the router. Typically, wireless interference can cause poor signal strength and speed. Changing channels helps alleviate this problem to some extent. I'd suggest trying channels 1, 3, 6 or 9. You'll have to try each and observe which channel gives you the best performance. Every network environment is different, so what works for one network may not necessarily work for another. Please let me know if you need any further help with this.

  • How do I create an interrupt on the PCI-DIO-96 from an external signal connected to the lines PC0 or PC3 of a port?

    Hi everybody,
    we are currently using the PCI-DIO-96 for data acquisition from an old AT-DIO-32F card. All PPIs and ports work in mode 0 (standard input/output). The manual mentions the possibility to create an interrupt from an external signal connected to the lines PC0 and PC3 of port C from a PPI. To get the interrupt I have connected my interrupt service routine to the PCI-DIO-96, enabled the master interrupt enable bit in the interrupt configuration register 2 and enabled interrupt enable bits of every PPI chip in the interrupt configuration register 1. The interrupt should be generated if a signal low-to-high transition occurs on th
    e lines PC0 or PC3 of a PPI. We've simulated the signal low-to-high transition with an external voltage source connected to the line PC0. We actually saw in the memory that the line toggled from state low to state high, but no interrupt was generated. I don't have a guess what I am doing wrong. Perhaps anybody knows the solution of this problems.
    Thanks and best regards.
    Sven Jungnickel

    You may want to try disabling your USB or IEEE-1394 host controller. It's possible that one of these devices could be on the same interrupt as you DIO-96 and causing the interrupt to not be serviced.
    Regards,
    Erin

  • Slow signal strength fluctuation and up/down client link

    I have completed installation and configuration system which consist WLC5508(HA),MSE and WCS (all soft are last version). APs - 1252 a/b/g/n. But have problem, some clients have a slow signal strength fluctuation and up/down client link per 1hour or 30minuts. I see that this occur, when client change AP, but I can't understand why because client are not roam, they on the one point during all time (laptop on the table for test).

    Signal strength measurement is not an industry standard measurement, although dB and mw conversions are a defined standard in the aspect that 100mw is always 20dB not every client card software defines an RSSI of -67dB to be excellent.
    So the validation of signal strength can vary widely in the client card software between brands and even between models, or between software releases. So there are a number of factors that play into this also keep in mind that each client cards driver software has it's own roaming behavior, that varies as widely as its depiction of the signal strength values.
    Additionaly power save functions and the antenna type in the device can all affect the perceived signal strength and roaming behavior.
    So the flux your seeing could be a result of the any of the following items or something else
    network design: meaning possibly there is insufficent coverage and the flux you are seeing is actually multipath. 
    Client Card: Some client cards just don't perform well and have sub-standard components that impact performance
    Driver Software: some driver software is just bad, it has poor algorithims, poor logic, etc.
    Bad antenna: the antenna in the device could be of poor quality or defective.
    Hope this helps...
    Please rate helpful posts.

  • Signal strength fluctuation

    Hi all,
    We are installing a WLC-4402 with 1252 APs connected; they have been working ok; but we have a problem with a Lenovo x61's wireless laptop card; the signal strength of this client fluctuate (up and down) each few seconds (sometimes it gets disconnected even though it is located very close - 20 feet - to the AP); has anyone experienced the same problem?

    Check to see if you have any co-channel interference of some sort. You should see the "signal strength" meter flunctuate here and there. It's the wifi card that is negotiating best signal. If you see the signal drop to like 5.5mbps 2 mbps, usually it is noise around the area.

  • Wireless connection fluctuations!

    I purchased a Toshiba Tecra M3 1.73Ghz with 802.11bg wireless in July this year and it's been working fine until about a month ago. Upon startup, my wireless connection registers 58MBps (and 'excellent' signal strength) but within 5 minutes, that drops radically to 24MBps and even a measly 1MBps at times. I also note that it frequently disconnects and reconnects by itself, with new pop-up windows notifying me of new connetions.
    I've checked my wireless hub and there are no problems with it. Indeed, my housemate experiences no problems with connection speeds on his Apple G5. I've also tried the obvious solution of moving my laptop right next to the hub but that has not affected the connectivity.
    Download speeds fluctuate constantly and I am unable to play online games like Counter-strike: Source because I constantly disconnect and hang with my ping jumping from 30 to 9999.
    Is this a hardware problem or is there some software issue that I'm missing? If so, where can I take my laptop to get the hardware sorted out?
    Thanks,
    Ben

    Exactly the same problems do I have, and tried every driver from intel, from 8.0.x.x to 9.3.x.x, nothing helped, no Setting change too.
    Installed Atheros AR5006XS Wireless Adapter, by doing the "Tape over Pin11 (7) trick", with newest driver now, and now connection works fine. No lags, ping is very good, always connection to Access Point. In my opinion it's a hardware or driver problem by Intel.

  • TS1398 ipad3 wireless connection fluctuates

    Home internet connection on my iPad3 fluctuates. Using Time Capsule and Airport Express as range extender; both check out fine. Fluctuate connection more of a problem when AE is closest wifi source.

    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    Additional things to try.
    Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    Change the channel on your wireless router (Auto is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    If none of the above suggestions work, look at this link.
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130?tstart=60
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Can I see the Ethernet signal connected to my PC on RJ-45 connector (electric form)?

    Hi,
    I start working on a project that needs me to know the electric characterisitics of an Ethernet signal in a specific network, and it is illegal to connect any device directly to the network (except for PC). So I was thinking can I use Labview to get this signal from RJ-45 connector and see it??
    I'd appreciate any comments or thoughts that help me.
    Thanks in advance,
    Zeina

    Dear Zeina
    As Dennis mentioned previously you need an instrument to analyze the signal from the Ethernet. You can then use LabVIEW to analyze the signal, once you have connected the relevant pins of the ethernet cable you wish to view the signal through.
    Using NI-VISA you can communicate to a third party device over the ethernet link and acquire a signal in LabVIEW or Measurement and Automation Explorer (MAX). The is a useful link below:
    http://zone.ni.com/devzone/cda/tut/p/id/7374
    Many thanks for using the NI forums and I look forward to your reply.
    Kind regards
    David
    Applications Engineer
    National Instruments UK

  • Dispatcher Running But no Server Connected---- Fluctuate

    Hi All,
       I found a strange problem in my QA system.
    My QA system fluctuates most of the time. It Runs ok but just between 5-10 min after running successfully it suddenly goes down and the connection to the server is lost.
    The ABAP stack runs absolutely ok even during that time. But the JAVA stack throws an error like u201CDispatcher is running but no server connected u201C.
    Do anyone have any idea on this. The same installation is applied to Dev also and it is working perfectly but the QA is giving me the problem.
    Thanks ,
    JAY.

    Yes i got ,,
      and here it is...
    ============================================================================
    <!LOGHEADER[START]/>
    <!HELP[Manual modification of the header may cause parsing problem!]/>
    <!LOGGINGVERSION[1.5.3.7186 - 630]/>
    <!NAME[./log/system/server.log]/>
    <!PATTERN[server.log]/>
    <!FORMATTER[com.sap.tc.logging.ListFormatter]/>
    <!ENCODING[ASCII]/>
    <!FILESET[0, 5, 10485760]/>
    <!PREVIOUSFILE[server.4.log]/>
    <!NEXTFILE[server.1.log]/>
    <!LOGHEADER[END]/>
    #1.5#0003BADBE09F002400000052000059E4000455F2596502B9#1220399277081#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.aii.af] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000053000059E4000455F259655E98#1220399277104#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.aii.af finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000054000059E4000455F259655F83#1220399277105#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.aii.af finished on current cluster node for 30 ms.#
    #1.5#0003BADBE09F002400000055000059E4000455F25965A193#1220399277121#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.aii.security.ws] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000056000059E4000455F259667B9A#1220399277177#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Warning#1#com.sap.engine.services.deploy#Plain###
    Warning occurred on server 39925850 during stopApp sap.com/com.sap.aii.security.ws : Application sap.com/com.sap.xi.pck has a weak reference to application sap.com/com.sap.aii.security.ws which is being stopped and it may not work correctly.#
    #1.5#0003BADBE09F002400000057000059E4000455F259667CC5#1220399277178#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.aii.security.ws finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000058000059E4000455F259667D58#1220399277178#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.aii.security.ws finished on current cluster node for 71 ms.#
    #1.5#0003BADBE09F002400000059000059E4000455F25966BE50#1220399277194#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.pmi.adm] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000005A000059E4000455F25966C522#1220399277196#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.pmi.adm finished successfully on server 39925850#
    #1.5#0003BADBE09F00240000005B000059E4000455F25966C5C3#1220399277196#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.pmi.adm finished on current cluster node for 15 ms.#
    #1.5#0003BADBE09F00240000005C000059E4000455F25966FE56#1220399277211#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.engine.docs.examples] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000005D000059E4000455F25967059D#1220399277213#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.engine.docs.examples finished successfully on server 39925850#
    #1.5#0003BADBE09F00240000005E000059E4000455F259670641#1220399277213#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.engine.docs.examples finished on current cluster node for 14 ms.#
    #1.5#0003BADBE09F00240000005F000059E4000455F259672D2B#1220399277223#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.aii.af.adapter.caller] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000060000059E4000455F2596732D6#1220399277224#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.aii.af.adapter.caller finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000061000059E4000455F259673370#1220399277224#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.aii.af.adapter.caller finished on current cluster node for 8 ms.#
    #1.5#0003BADBE09F002400000062000059E4000455F2596783E9#1220399277245#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.xi.repository] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000063000059E4000455F259692FAB#1220399277354#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/com.sap.xi.repository' application stopped successfully.#
    #1.5#0003BADBE09F002400000064000059E4000455F259693D52#1220399277358#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.xi.repository finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000065000059E4000455F259693DF7#1220399277358#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.xi.repository finished on current cluster node for 131 ms.#
    #1.5#0003BADBE09F002400000066000059E4000455F259697F45#1220399277375#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.security.core.admin] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000067000059E4000455F25969852C#1220399277376#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.security.core.admin finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000068000059E4000455F2596985C6#1220399277376#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.security.core.admin finished on current cluster node for 14 ms.#
    #1.5#0003BADBE09F002400000069000059E4000455F25969A7A4#1220399277385#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.aii.af.ispeak.eventlistener] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000006A000059E4000455F25969ACBF#1220399277386#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.aii.af.ispeak.eventlistener finished successfully on server 39925850#
    #1.5#0003BADBE09F00240000006B000059E4000455F25969AD5B#1220399277387#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.aii.af.ispeak.eventlistener finished on current cluster node for 8 ms.#
    #1.5#0003BADBE09F00240000006C000059E4000455F25969B9DB#1220399277390#/System/Server##com.sap.bcb.support.DeployEventListener.processApplicationEvent######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.bcb.support.DeployEventListener#Plain###BCB application will be stopped now...#
    #1.5#0003BADBE09F00240000006D000059E4000455F2596AFCC1#1220399277472#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/tcbcbici] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000006E000059E4000455F25975D1C9#1220399278182#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/tcbcbici finished successfully on server 39925850#
    #1.5#0003BADBE09F00240000006F000059E4000455F25975D288#1220399278183#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/tcbcbici finished on current cluster node for 794 ms.#
    #1.5#0003BADBE09F002400000070000059E4000455F2597620B9#1220399278203#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.xi.directory] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000071000059E4000455F259776E5E#1220399278288#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/com.sap.xi.directory' application stopped successfully.#
    #1.5#0003BADBE09F002400000072000059E4000455F2597779D7#1220399278291#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.xi.directory finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000073000059E4000455F259777A78#1220399278291#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.xi.directory finished on current cluster node for 105 ms.#
    #1.5#0003BADBE09F002400000074000059E4000455F259779C04#1220399278300#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/tcwdpdfsvrchal] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000075000059E4000455F25977A12F#1220399278301#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/tcwdpdfsvrchal finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000076000059E4000455F25977A1CB#1220399278301#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/tcwdpdfsvrchal finished on current cluster node for 7 ms.#
    #1.5#0003BADBE09F002400000077000059E4000455F25977DF6D#1220399278317#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.engine.heartbeat] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000078000059E4000455F259785B52#1220399278349#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.engine.heartbeat finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000079000059E4000455F259785C06#1220399278349#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.engine.heartbeat finished on current cluster node for 46 ms.#
    #1.5#0003BADBE09F00240000007A000059E4000455F25978A79B#1220399278368#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.xi.mdt] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000007B000059E4000455F25979FC58#1220399278455#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.xi.mdt finished successfully on server 39925850#
    #1.5#0003BADBE09F00240000007C000059E4000455F25979FD0E#1220399278456#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.xi.mdt finished on current cluster node for 105 ms.#
    #1.5#0003BADBE09F00240000007D000059E4000455F2597A1E57#1220399278464#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.aii.af.rfc.app] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000007E000059E4000455F2597A2396#1220399278465#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.aii.af.rfc.app finished successfully on server 39925850#
    #1.5#0003BADBE09F00240000007F000059E4000455F2597A2431#1220399278466#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.aii.af.rfc.app finished on current cluster node for 8 ms.#
    #1.5#0003BADBE09F002400000080000059E4000455F2597A426D#1220399278473#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.engine.class.download] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000081000059E4000455F2597A475A#1220399278475#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.engine.class.download finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000082000059E4000455F2597A47F3#1220399278475#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.engine.class.download finished on current cluster node for 7 ms.#
    #1.5#0003BADBE09F002400000083000059E4000455F2597A6C56#1220399278484#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.xi.pck] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000084000059E4000455F2597AA4ED#1220399278499#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/com.sap.xi.pck' application stopped successfully.#
    #1.5#0003BADBE09F002400000085000059E4000455F2597AAFAB#1220399278501#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.xi.pck finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000086000059E4000455F2597AB05B#1220399278501#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.xi.pck finished on current cluster node for 24 ms.#
    #1.5#0003BADBE09F002400000087000059E4000455F2597ACFA9#1220399278509#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/com.sap.aii.af.jmsadapter] finished successfully on Web Container.#
    #1.5#0003BADBE09F002400000088000059E4000455F2597AD48F#1220399278511#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.aii.af.jmsadapter finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000089000059E4000455F2597AD53B#1220399278511#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.aii.af.jmsadapter finished on current cluster node for 7 ms.#
    #1.5#0003BADBE09F00240000008A000059E4000455F2597AF7C9#1220399278520#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/tcTechSrvXML_DAS] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000008B000059E4000455F2597B4D7C#1220399278542#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcTechSrvXML_DAS' application stopped successfully.#
    #1.5#0003BADBE09F00240000008C000059E4000455F2597B5550#1220399278544#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/tcTechSrvXML_DAS finished successfully on server 39925850#
    #1.5#0003BADBE09F00240000008D000059E4000455F2597B55EA#1220399278544#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/tcTechSrvXML_DAS finished on current cluster node for 31 ms.#
    #1.5#0003BADBE09F00240000008E000059E4000455F2597B7AE9#1220399278553#/System/Server##com.sap.engine.services.servlets_jsp.server.container.WebContainer######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.servlets_jsp.server.container.WebContainer#Plain###Stop of application [sap.com/tcmonitoringsysteminfo] finished successfully on Web Container.#
    #1.5#0003BADBE09F00240000008F000059E4000455F2597B7FBE#1220399278555#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/tcmonitoringsysteminfo' application stopped successfully.#
    #1.5#0003BADBE09F002400000090000059E4000455F2597B8562#1220399278556#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/tcmonitoringsysteminfo finished successfully on server 39925850#
    #1.5#0003BADBE09F002400000091000059E4000455F2597B860F#1220399278556#/System/Server##com.sap.engine.services.deploy######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/tcmonitoringsysteminfo finished on current cluster node for 10 ms.#
    #1.5#0003BADBE09F002400000093000059E4000455F2597BBA47#1220399278570#/System/Server##com.sap.engine.services.servlets_jsp.server.ServletsAndJspServerFrame######8d4dc2c0794911ddb7d70003badbe09f#SAPEngine_System_Thread[impl:5]_19##0#0#Error#1#com.sap.engine.services.servlets_jsp.server.ServletsAndJspServerFrame#Plain###Cannot lookup Deploy service.
    The error is: java.lang.ClassCastException: null
    Exception id: [0003BADBE09F002400000092000059E4000455F2597BB924]#
    #1.5#0003BADBE09F004400000015000059E4000455F2597BDE91#1220399278579#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service servlet_jsp stopped.#
    #1.5#0003BADBE09F004400000016000059E4000455F2597BE858#1220399278581#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service adminadapter stopped.#
    #1.5#0003BADBE09F004400000017000059E4000455F2597F9A9D#1220399278824#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service monitor stopped.#
    #1.5#0003BADBE09F004400000018000059E4000455F2598006D9#1220399278851#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service basicadmin stopped.#
    #1.5#0003BADBE09F004400000019000059E4000455F259810CCC#1220399278918#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service apptracing stopped.#
    #1.5#0003BADBE09F00440000001A000059E4000455F259821AAC#1220399278987#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service jms_provider stopped.#
    #1.5#0003BADBE09F0032000000B5000059E4000455F259826C15#1220399279008#/System/Server##com.sapmarkets.bam.jmxadapter.CCMSCommandConsumer######5c5547a0794511dd855e0003badbe09f#Thread[SAPEngine_CCMSCommandConsumer_0,10,SAPEngine_System_Thread[impl:5]_Group]##0#0#Info#1#com.sapmarkets.bam.jmxadapter.CCMSCommandConsumer#Plain###CCMSGeneration thread was interrupted#
    #1.5#0003BADBE09F00440000001B000059E4000455F259826E13#1220399279009#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service tc.monitoring.logviewer stopped.#
    #1.5#0003BADBE09F00440000001C000059E4000455F2598277B3#1220399279011#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service jmx stopped.#
    #1.5#0003BADBE09F00440000001D000059E4000455F25982BD65#1220399279029#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service webdynpro stopped.#
    #1.5#0003BADBE09F00440000001E000059E4000455F25982C474#1220399279031#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service telnet stopped.#
    #1.5#0003BADBE09F00440000001F000059E4000455F259832F9D#1220399279058#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service shell stopped.#
    #1.5#0003BADBE09F004000000009000059E4000455F2598332E1#1220399279059#/System/Server##com.sap.engine.services.deploy######8d1eea90794911ddb8490003badbe09f#SAPEngine_System_Thread[impl:5]_73##0#0#Warning#1#com.sap.engine.services.deploy#Plain###Stopping application sap.com/com.sap.jdo which is in started mode, because the resource applocking with type service is not available.#
    #1.5#0003BADBE09F00400000000A000059E4000455F2598357B8#1220399279069#/System/Server##com.sap.engine.services.dbpool.deploy.ContainerImpl######8d1eea90794911ddb8490003badbe09f#SAPEngine_System_Thread[impl:5]_73##0#0#Info#1#com.sap.engine.services.dbpool.deploy.ContainerImpl#Plain###DataSources or DataSource aliases of 'sap.com/com.sap.jdo' application stopped successfully.#
    #1.5#0003BADBE09F00400000000B000059E4000455F259835E58#1220399279070#/System/Server##com.sap.engine.services.deploy######8d1eea90794911ddb8490003badbe09f#SAPEngine_System_Thread[impl:5]_73##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp over application sap.com/com.sap.jdo finished successfully on server 39925850#
    #1.5#0003BADBE09F00400000000C000059E4000455F259835EF6#1220399279070#/System/Server##com.sap.engine.services.deploy######8d1eea90794911ddb8490003badbe09f#SAPEngine_System_Thread[impl:5]_73##0#0#Info#1#com.sap.engine.services.deploy#Plain###
    Operation stopApp on application sap.com/com.sap.jdo finished on current cluster node for 9 ms.#
    #1.5#0003BADBE09F002D00000036000059E4000455F25983691D#1220399279073#/System/Server##com.sap.engine.services.applocking.AppLockingApplicationFrame.unbindFromNaming(expectNamingAvailable)######8d473310794911ddc2a40003badbe09f#SAPEngine_System_Thread[impl:5]_63##0#0#Info#1#com.sap.engine.services.applocking.AppLockingApplicationFrame#Java###Successfully unbound from JNDI#1#applocking-service#
    #1.5#0003BADBE09F002D00000037000059E4000455F259836A3C#1220399279073#/System/Server##com.sap.engine.services.applocking.AppLockingApplicationFrame.stop()######8d473310794911ddc2a40003badbe09f#SAPEngine_System_Thread[impl:5]_63##0#0#Info#1#com.sap.engine.services.applocking.AppLockingApplicationFrame#Java### stopped successfully#1#applocking-service#
    #1.5#0003BADBE09F004400000020000059E4000455F259836CED#1220399279074#/System/Server##com.sap.engine.core.service630.container.MemoryContainer######57d5b2f0794511ddbfb00003badbe09f#Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service applocking stopped.#
    #1.5#0003BADBE09F004400000021000059E4000455F25983DD86#1220399279103#/System/Server##com.sap.engine.core.service630.container.MemoryContainer#######Thread[Thread-35,5,main]##0#0#Info#1#com.sap.engine.core.service630.container.MemoryContainer#Plain###Service dsr stopped.#
    #1.5#0003BADBE09F004900000043000059E4000455F2599103AF#1220399279965#/System/Server##com.sapmarkets.bam.jmxadapter.CCMSCommandConsumer#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_23##0#0#Info#1#com.sapmarkets.bam.jmxadapter.CCMSCommandConsumer#Plain###New thread spawned for generating the ccmstemplates.#
    #1.5#0003BADBE09F004900000044000059E4000455F2599141AA#1220399279980#/System/Server##com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#Plain###com.sapmarkets.bam.util.BAMRuntimeException: Error occured while trying to register     a new log#
    #1.5#0003BADBE09F006900000008000059E4000455F2599141F8#1220399279981#/System/Server##com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#Plain###com.sapmarkets.bam.util.BAMRuntimeException: Error occured while trying to register     a new log#
    #1.5#0003BADBE09F00690000000A000059E4000455F2599148D9#1220399279982#/System/Server##com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#Plain###com.sap.engine.services.jmx.exception.JmxIllegalStateException: JmxFrame not completely initialized, innerMBeanServer is null#
    #1.5#0003BADBE09F004900000046000059E4000455F25991495F#1220399279982#/System/Server##com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#Plain###com.sap.engine.services.jmx.exception.JmxIllegalStateException: JmxFrame not completely initialized, innerMBeanServer is null#
    #1.5#0003BADBE09F004900000048000059E4000455F25991587A#1220399279986#/System/Server##com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_23##0#0#Error#1#com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#Plain###Originated from: com.sap.engine.services.jmx.exception.JmxIllegalStateException: JmxFrame not completely initialized, innerMBeanServer is null
         at com.sap.engine.services.jmx.JmxFrame.getInnerMBeanServer(JmxFrame.java:467)
         at com.sap.engine.services.jmx.ClusterInterceptor.getInnerMBS(ClusterInterceptor.java:119)
         at com.sap.engine.services.jmx.ClusterInterceptor.getMBSC(ClusterInterceptor.java:190)
         at com.sap.engine.services.jmx.ClusterInterceptor.isRegistered(ClusterInterceptor.java:868)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.isRegistered(MBeanServerInterceptorChain.java:290)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogAsMBean(AbstractFileLogHandler.java:229)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogMBean(AbstractFileLogHandler.java:151)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogMBean(AbstractFileLogHandler.java:85)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogMBean(AbstractFileLogHandler.java:402)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.handleEvent(AbstractFileLogHandler.java:469)
         at com.sap.tc.logging.LoggingManager.notifyAddLog(LoggingManager.java:342)
         at com.sap.tc.logging.LogController.addLog(LogController.java:1328)
         at com.sap.tc.logging.PropertiesConfigurator.configure(PropertiesConfigurator.java:1119)
         at com.sap.jms.client.connection.ConnectionFactory.createConnection(ConnectionFactory.java:314)
         at com.sap.jms.client.connection.ConnectionFactory.createConnection(ConnectionFactory.java:257)
         at com.sap.jms.client.connection.QueueConnectionFactory.createQueueConnection(QueueConnectionFactory.java:70)
         at com.sap.engine.services.jmsconnector.cci.QueueConnectionFactoryImpl.createQueueConnection(QueueConnectionFactoryImpl.java:162)
         at com.sap.engine.services.ejb.message.JMSBridge.createConnection(JMSBridge.java:194)
         at com.sap.engine.services.ejb.message.JMSBridge.registerQueueListener(JMSBridge.java:142)
         at com.sap.engine.services.ejb.message.JMSBridge.recreateJMSConnection(JMSBridge.java:278)
         at com.sap.engine.services.ejb.message.MDBExceptionListener.onException(MDBExceptionListener.java:38)
         at com.sap.engine.services.jmsconnector.cci.ConnectionImpl.onException(ConnectionImpl.java:118)
         at com.sap.jms.client.connection.Connection.onException(Connection.java:824)
         at com.sap.jms.server.ServerClientAdapter$ExceptionListenerCaller.run(ServerClientAdapter.java:366)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    #1.5#0003BADBE09F00690000000C000059E4000455F259915885#1220399279986#/System/Server##com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#J2EE_GUEST#0#####SAPEngine_Application_Thread[impl:3]_37##0#0#Error#1#com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler#Plain###Originated from: com.sap.engine.services.jmx.exception.JmxIllegalStateException: JmxFrame not completely initialized, innerMBeanServer is null
         at com.sap.engine.services.jmx.JmxFrame.getInnerMBeanServer(JmxFrame.java:467)
         at com.sap.engine.services.jmx.ClusterInterceptor.getInnerMBS(ClusterInterceptor.java:119)
         at com.sap.engine.services.jmx.ClusterInterceptor.getMBSC(ClusterInterceptor.java:190)
         at com.sap.engine.services.jmx.ClusterInterceptor.isRegistered(ClusterInterceptor.java:868)
         at com.sap.pj.jmx.server.interceptor.MBeanServerInterceptorChain.isRegistered(MBeanServerInterceptorChain.java:290)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogAsMBean(AbstractFileLogHandler.java:229)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogMBean(AbstractFileLogHandler.java:151)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogMBean(AbstractFileLogHandler.java:85)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.registerLogMBean(AbstractFileLogHandler.java:402)
         at com.sapmarkets.bam.jmxadapter.sapjlog.AbstractFileLogHandler.handleEvent(AbstractFileLogHandler.java:469)
         at com.sap.tc.logging.LoggingManager.notifyAddLog(LoggingManager.java:342)
         at com.sap.tc.logging.LogController.addLog(LogController.java:1328)
         at com.sap.tc.logging.PropertiesConfigurator.configure(PropertiesConfigurator.java:1119)
         at com.sap.jms.client.connection.ConnectionFactory.createConnection(ConnectionFactory.java:314)
         at com.sap.jms.client.connection.ConnectionFactory.createConnection(ConnectionFactory.java:257)
         at com.sap.jms.client.connection.QueueConnectionFactory.createQueueConnection(QueueConnectionFactory.java:70)
         at com.sap.engine.services.jmsconnector.cci.QueueConnectionFactoryImpl.createQueueConnection(QueueConnectionFactoryImpl.java:162)
         at com.sap.engine.services.ejb.message.JMSBridge.createConnection(JMSBridge.java:194)
         at com.sap.engine.services.ejb.message.JMSBridge.registerQueueListener(JMSBridge.java:142)
         at com.sap.engine.services.ejb.message.JMSBridge.recreateJMSConnection(JMSBridge.java:278)
         at com.sap.engine.services.ejb.message.MDBExceptionListener.onException(MDBExceptionListener.java:38)
         at com.sap.engine.services.jmsconnector.cci.ConnectionImpl.onException(ConnectionImpl.java:118)
         at com.sap.jms.client.connection.Connection.onException(Connection.java:824)
         at com.sap.jms.server.ServerClientAdapter$ExceptionListenerCaller.run(ServerClientAdapter.java:366)
         at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
         at java.security.AccessController.doPrivileged(Native Method)
         at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
         at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
    ==================================================================================

  • Signal Connection of NI-6602

    Hello
    Can we connect one counter's output to other two counter's gate?
    In other words,splitting one output signal to two then connect them to the gate of other two counters.
    Is there any impedence issue?

    Hello Moment,
    It should not cause any problem so as long as you are just connecting to two other counters.
    Serges L.

  • WRT110 Wireless - Unable to detect signal/connection.

    Recently lost connectivity to an existing wireless connection that I had configured months ago.  Both XP laptop connecting with Dell Wireless WLAN Card and Wii box will no longer connect or detect signal.  Oddly, wireless connection showed up momentarily after resetting power on router but then disappeared. I connect fine through wired connection and laptop detects all my neighbors SSIDs.  All lights on router are lit...but no wireless signal.  I even attached a USB wireless device to my desktop pc to test.  It detected all the neighbors SSIDs but not mine.  Same with laptop.  
    Troubleshooting steps I performed:
    ------Router------
    Cycled power.
    Held reset button. 
    Upgraded Linksys firmware to 1.0.5
    Changed configuration to Enable SSID Broadcast
    ------Laptop------
    Upgraded Dell WLAN card driver from vA17 4.170.5 to vA22 4.170.77.18
    Disabled Dell Wireless utility and enabled Windows Wireless configuration.  Neither Dell Utility or Windows Wireless detected my wireless signal.  Both will detect AND connect to neighbor's open connection.
    Appreciate any insight or other troubleshooting suggestions.
    Solved!
    Go to Solution.

    Readjust the wireless settings on your router...
    Open an Internet Explorer browser page on your wired computer(desktop).In the address bar type - 192.168.1.1 and press Enter...Leave Username blank & in Password use admin in lower case...
    For Wireless Settings, please do the following : -
    Click on the Wireless tab
    - Here select manual configuration...Wireless Network mode should be mixed...
    - Provide a unique name in the Wireless Network Name (SSID) box in order to differentiate your network from your neighbours network...
    - Set the Radio Band to Standard-20MHz and change the Standard channel to 11-2.462GHz...Wireless SSID broadcast should be Enabled and then click on Save Settings...
    Please make a note of Wireless Network Name (SSID) as this is the Network Identifier...
    For Wireless Security : -
    Click on the Sub tab under Wireless > Wireless Security...
    Change the Wireless security mode to WEP, Encryption should be 64 bit.Leave the passphrase blank, don't type in anything...Under WEP Key 1 type in any 10 numbers please(numbers only and no letters eg: your 10 digit phone number) and click on save settings...Please make a note of WEP Key 1 as this is the Security Key for the Wireless Network...
    Click on Advanced Wireless Settings
    Change the Beacon Interval to 75 >>Change the Fragmentation Threshold to 2304, Change the RTS Threshold to 2304 >>Click on "Save Settings"...
    Now see if you can locate your Wireless Network and attempt to connect...

  • Shared signal connection while using all counters on NI-9411 corrupts data?

    Currently have 3 quadratic encoders (w/o z-ref) wired into NI9411 counter inputs.  Allows me to get position and rpm with same signal.  However, the counter inputs shared a common wiring hub and therefore interferes with each others readings.  How can I solve this?  I am using Daqmx and the connections are provided to me through the software.  I can hook up each encoder individually and they work fine on their given ports but cannot run them all simultaneusly. 
    Example: Cntr 0 uses terminals PFI0 and PFI2
                  Ctnr 1 uses terminals PFI3 and PFI5
                   Cntr 2 uses terminals PFI2 and PFI1
                   Cntr 3 uses terminals PFI5 and PFI4
    As you can see there are shared connections points whcich would only allow me to use two counters simultaneusly when I need to use three. 
    Any help would be great.
    Thanks,
    -P

    Hi HDtech,
    Unfortunately you won't be able to take more than two counter inputs at a time with this module. Although it allows some counter functionality, this module is primarily used for industrial DI functionality. If you need more counter inputs you could get another 9411, or you can get a module more dedicated to counter inputs such as the 9402 which can take four counter inputs. Alternatively, if you have other modules in your cDAQ chassis you might be able to make use of one of them for the third counter input channel.
    Hopefully this helps,
    Chris G
    Applications Engineer
    National Instruments

  • WRT54G v5 Connection Fluctuations

    What I would like to ask Linksys is: Is it normal for the connection to keep fluctuating between 18 to 54 MBPS continuously? I would assume not.
    Please inform. Thanks

    pennylane wrote:
    I believe it's just interference. Click here for your reference.
    Afraid not. Router in next door in my bedroom. Laptop (wirless) is in living room. Cordless phone is 900 MHz (that doesn't interfere). Microwave only does, when it's on.
    I had mentioned that the connection CONTINOUSLY keeps fluctuating, i.e., non-stop. I monitor it on the Windows Task Manager. Just as I click on the website, between the time I click, to the full opening of the page, it has changed speeds already.
    I have experimented with changing transmission rate on router as well as Broadcom adapter to be set at 48 MBPS. Settings on both sides are also excluding a-type networks, only b-g included. Now I get a steady stream of 48 rate but what's happening is that connection gets reset every hour-2hours or so. This, I guess, is logical because when the network cannot maintain that high rate of 48, network connection drops.
    I could set a lower rate but that defeats the purpose of buying the wireless g router.
    Have to figure out a way to maintain the high rate.

  • Is that OK to power up SCC-SG01/S​C-2345 with no signal connected?

    A dumb question from first time user:
    From the specification of SCC-SG01, the voltage input range is -100mV
    to 100mV. But if no signal/sensor is connected to SCC-SG01, is that
    equivelent to RG = infinite so that voltage input becomes 2.5V/2 =
    1.25V which exceeds the limit?

    Hello,
    You are correct.  The signal would be floating at 1.25 Volts, which would cause your measurement to rail at 100 mV.  The SCC-SG01 has over voltage protection up to 28 V, so 1.25 V will not damage the module.
    Please see the SCC-SG Series Strain-Gauge Modules User Guide for more details at:  http://digital.ni.com/manuals.nsf/websearch/876393​DF257DB5B086256E55005A51CE
    I hope this helps.
    Regards,
    Sean C.

Maybe you are looking for

  • Can I import two sets of data to Essbase at the same time?

    For example, use two MaxL Scripts to import data to one Essbase Application Datatbase in the Same time, is there any impacted or will fail one of them or nothing will happen but just slower?

  • Why can't i see songs on my iPod in iTunes when connected

    I have several songs on my iPod touch that I'd like to delete, but when i plug it into my computer and open iTunes, the songs are not displayed as being on the iPod.  How do I make them visible to delete them?

  • View Accounting in FA R12 not working

    Hi All, I cannot access the view accouting button in fixed assets in R12. We have already run the create accounitng but view accounting is frozen. Thanks and Regards, MPH

  • PXI-2575 minimum load

    I work on new project. I will use multimeter PXI-4070 with switch mux PXI-2575. The multimeter will measure voltage on differents tests points of a circuit in test. The input impedance of PXI-4070 are 10Mohms in measure voltage mode. So the current i

  • Macbook Pro Speed Test

    Hey everyone, So I purchased a new "super fast" MSP just a few weeks ago. I am having some continuing issues with computer lagging when opening programs and what not. So far I am a little under impressed with what has been reported as lightning fast