Wi-fi working on other devices.  When trying to connect on ipad it states"unable to join network".  Some of my efforts have resulted in short term connection, but then I lose it again.

anybody have any idea what would cause my wi-fi to state "unable to join network when all other devices are haveing no connection problem.?

Try the remedies that are in this Apple support document on troubleshooting Wi-Fi.
http://support.apple.com/kb/TS1398

Similar Messages

  • Ipad 2 is unable to join network while other media can

    My ipad2 and Apple TV detected the WiFi but are unable to join the network. While my laptop and nokia handphone can connect well. I have done so many things, resetting it number of times, change its name but still not working.

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    iOS 6 Wifi Problems/Fixes
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    Look at iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • My wife and I both have I phones4 . We have wifi in our apartment which I can access fine,her phone finds all the networks on our floor but when selecting ours , a message states,unable to join network.When she selects our neighbors network,it re

    My iPhone 4 can use our wifi network fine,but my wife's iPhone 4 gets the message unable to connect to network . If she selects our neighbor s network , it asks for their password . She can connect to our. Network with her iPad fine?
    AT&T said the phone was fine and selected their in store network without problem. The wifi provider said they could not help. Any thoughts?

    Maiko,
    I'm confess I'm still trying to get a handle on your problem. You do a fantastic job of describing it ... but I'm just trying to picture it accurately in my head.
    I think, were I in your shoes, I'd begin by looking at what the debug page has to say for the specific destination in which you're interested in fixing. In other words, I'm not clear on where, exactly, this destination points ...
    Destination illinois.edu.1945806043
    Is that your site, or the division within your site that you want to fix? "Normally", you do not need to specify a site handle to get to your site within your transfer CGI ... if you say "uillinois.edu", it's enough to transfer your users to iTunes U ... but every site still has a handle, and you could, if you wanted to, actually specify it in your transfer CGI. For example, this:
    Destination uic.edu.1139051993
    is for my entire site ... it's my site handle. Whereas this:
    Destination uic.edu.1991288441
    is for a division within my site ... but it's impossible to tell the difference between "site" and "division" from just the handle (I mean, if I didn't say "this is a site" and "this is a division", there'd be no way for you to know). So when I look at your creds and permissions on your debug page, I can't quite tell if they give you download access for your site, or for the specific division you want to fix. If you could open the debug page with your division as destination (or confirm that that's what we're looking at), it'd rule out some things.

  • TS1398 I am getting when manually entering wifi info of "Could not scan for wireless networks" wireless is working on other devices, how do I cure this?  The problem only began when I updated software on the phone.  Previously I had no problems with wifi.

    After updating software on Iphone (wifi worked fine before the software update) I  now can not get on wifi.  The phone with not find a working wifi network nor can I connect manually.  Wifi is working on other devices.  I have turned the phone on and off, turned the wifi router on and off and reset the iphone and down loaded updated software to the phone.  Nothing has worked.  Does anyone have an answer for this problem?

    Could this be the problem?
    iPhone 4 Modem Firmware : 3.0.04
    iPhone 4S Modem Firmware : 2.0.10
    Wifi is working on my iPhone 4, NOT on 4S -
    Why is my new 4S I got yesterday using a 2.0.10 firmware, isn't that old?! Isn't the newest 4.0+?
    I am so tired of trying to figure this out.
    The Wi-Fi addresses in the About settings are different on both phones too.

  • Cant use wifi after updating to ios6 on iphone 4. Wifi signals drops off when watching videos. Wifi works on other devices

    Cant watch videos through wifi since updating to ios6 on iphone 4. Wifi works on other devices. Currently using BT wireless router. I believe this is a common issue but cant rectify

    Cant watch videos through wifi since updating to ios6 on iphone 4. Wifi works on other devices. Currently using BT wireless router. I believe this is a common issue but cant rectify

  • When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    When trying to log on to my personal hotspot on my Ipone, after entering the password the system continues to ask for the password over and over again. How do I fix this?

    Hi SheilaStuhr,
    The troubleshooting steps detailed below can help get you connected to your iPhone's personal hostpot.
    Basic troubleshooting
    See if your iOS device, computer, and wireless plan all meet the system requirements for Personal Hotspot.
    Make sure Personal Hotspot is on: Tap Settings > Cellular > Personal Hotspot.
    Check the Internet connection on your iOS device: Tap Safari and load a new webpage.
    If one connection type doesn't work, try another. For example, instead of connecting using Wi-Fi, use USB or Bluetooth.
    Turn Personal Hotspot off and on: Tap Settings > Personal Hotspot or Settings > Cellular > Personal Hotspot.
    Install the latest version of iOS.
    Reset your network settings: Tap Settings > General > Reset > Reset Network Settings.
    If you still see the issue, restore the iPhone.
    If you're still experiencing issues, try the steps below.
    Wi-Fi troubleshooting
    If you encounter an issue using Personal Hotspot with other Wi-Fi devices, try these steps:
    Turn Personal Hotspot off.
    Turn on Wi-Fi: Tap Settings > Wi-Fi.
    Turn on Personal Hotspot.
    If another device can't join your Wi-Fi network, make sure the Wi-Fi password is correct.
    If the device can't see your Wi-Fi network, check your device name. Windows may not correctly show a device name that uses non-ASCII characters.
    See how many devices are using your Personal Hotspot. Depending on your wireless carrier, the number of Wi-Fi connections may be limited to three devices at once.
    If the other device still can't connect, turn Wi-Fi off and on for the device.
    Make sure that your device can see other Wi-Fi networks.
    Note: If you see "Unable to Join" or a timeout error when you try to connect a device using Wi-Fi, remain on the Personal Hotspot screen until the first device connects. After the device connects, you can leave the Personal Hotspot screen and use your iPhone normally. Your device will stop broadcasting Wi-Fi if you put it to sleep or if 90 seconds elapse and no connected devices use Wi-Fi. To share your Wi-Fi network again, tap Settings > Personal Hotspot.
    iOS: Troubleshooting Personal Hotspot
    http://support.apple.com/en-us/HT203302
    All my best,
    Allen

  • When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again"

    When trying to use my banking apps I get the error "Network Required  This application requires an active Internet Connection.  Please try again".  This happens with two different apps from two different banks.  One of them works occasionally and have not figured out why.  I have cell signal and I am on a strong WiFi network.  Same thing happens when I turn off the WiFi too.    I have tried uninstalling and re-installing the app with no improvement.   I can't seem to find any setting that would cause this.   Does anyone have any suggestions?  

    I can access the internet just fine in the browser and i can use any other app i have.
    Sent from my Verizon Wireless 4G LTE DROID

  • I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer

    I'm getting an error message 'Apple Mobile Device service is not started' when trying to sync my ipad to my desktop computer. This usually works fine, so I don't know what I did to keep it form working.

    Are you using Windows? This tells you how to restart the AMDS for Windows.
    http://support.apple.com/kb/ts1567

  • When trying to sync my iPad I am getting a message stating " iTunes could not connect to the iPad "iPad" because an error occurred while reading the device

    When trying to sync my iPad I am getting a message stating that iTunes could not connect to the iPad "iPad " because an error occurred while reading from the device

    Hi Centreless,
    If you have difficulty with your iPad not being able to connect to iTunes in order to sync, you may want to try the troubleshooting steps in this article -
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • I have just update my MacBook to Snow Leopard 10.6.3.  Unfortunately I can not now connect to the internet.  I have a time capsule that is connected to a router.  This is working with other devices but if I try to connect with the MB everything stops?

    I have updated my MB to Snow Leopard 10.6.3 - I know this means I am a little behind the times but the problems I am now having seem to justify my reluctance.  Now am unable to connect to the internet!  I use a time capsule connected via a router.  Everything is still OK with every other device (PC, I phone, Ipod) in the house so I know the "Network" is still enabled and there is no problem with the ISP.  Strangley whenever I boot up the MB it appears to freeze the network such that the other devices also will then not access the internet.  To regain access I have to turn off the MB and reset the router.  Any help gratefully recieved as I have tried some of the ideas i have found in the internet but nothing is working.  Thanks.

    That's odd.
    Try this: Unplug your Time Capsule and your router. On your MBP, click the Wi-Fi icon and select "Open Network Preferences".
    Click the lock icon to authenticate, then click the "gear" and select "set service order". Wherever AirPort (or Wi-Fi - I forget what Snow Leopard calls it) appears, drag it elsewhere in the list. Click OK, then Apply, then power up your router and TC.
    If that doesn't result in any change, repeat the above but try making the service(s) you do not need "inactive".
    The purpose of this is to reset or at least change your Network Preferences, which somehow got confused upon upgrading to SL.

  • When trying to sync my IPad my computer says this iPad cannot be used because the apple mobile device service is not started. How do I start the mobile device service?

    When trying to sync my iPad my computer says this iPad cannot be used because the apple mobile device service is not started. How do I start the apple mobile device service?

    Follow this article: How to restart the Apple Mobile Device Service (AMDS) on Windows

  • When trying to purchase Final Cut Pro X from the App store receive following error msg - There was an error in the App Store. Please try again later. (100) - Am running Quad Core Xeon w/ 32GB Ram, ATI Radeon 5870

    When trying to purchase Final Cut Pro X from the App store receive following error msg - There was an error in the App Store. Please try again later. (100) - Am running Quad Core Xeon w/ 32GB Ram, ATI Radeon 5870

    Try again later  .  .  .  .  in an hour or so, not immediately.

  • The latest version of itunes (10.2.2) freezes immdiately after connecting a device when trying to sync to ipod, iphone or ipad. The beachball just keeps spinning forever or until I force quit

    The latest version of itunes (10.2.2) freezes immdiately after connecting a device when trying to sync to ipod, iphone or ipad. The beachball just keeps spinning forever or until I force quit

    Back up all data.
    Triple-click anywhere in the line below on this page to select it:
    ~/Library/Application Support/SyncServices
    Right-click or control-click the line and select
    Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Quit the application if it's running. Move the selected item to the Trash. Relaunch the application and test.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.

  • WHEN TRYING TO PURCHASE FROM iTUNES ALWAYS RECEIVE A POP-UP STATING "COULD NOT PURCHASE (name of song) A REQUIRED iTUNES COMPONENT IS NOT INSTALLED (-42404) TRY AGAIN" EXPERIENCED THIS FALL OF 2012 AND THEN SOMEHOW CLEARED UP NOW HAVE SAME PROBLEM. ???

    WHEN TRYING TO PURCHASE FROM iTUNES I ALWAYS RECEIVE A POP-UP  "COULD NOT PURCHASE (NAME OF SONG) A REQUIRED iTUNES COMPONENT IS NOT INSTALLED (-43404) TRY AGAIN. EXPERIENCED THIS DURING FALL OF 2012 AND HAD NO SATISFACTION AND AFTER A PERIOD OF 4-6 WEEKS TRIED AGAIN AND ALL WAS CORRECTED SOMEHOW. LAST PURCHASE WAS DEC 28TH 2012. NOW MARCH 2013 CANNOT PURCHASE AGAIN. WENT INTO ACCOUNT AND MADE SURE ALL WAS UPDATED BUT STILL NOT ABLE TO PURCHASE. ANY HELP WOULD BE GREATLY APPRECIATED.

    Reinstall iTunes

  • When trying to sync my iPad to iTunes, I get the message that iPad cannot be used as the Apple Mobile Device Service not started.

    When trying to sync my iPad to iTunes, I get the message that iPad cannot be used because Apple Mobile Device Service not started.

    If you are on a PC then there are instructions here for starting it http://support.apple.com/kb/TS1567 . If you are on a Mac then see this page http://support.apple.com/kb/HT1747

Maybe you are looking for