_WI_RESULT has one value but workflow follows different path

Hello,
I have a strange problem - I have a task which is defined against the standard BOR method EMPLOYEET->ENQUEUE
this tries to lock an employee.
if it fails it should let me know and the outcomes of the task should vary - I use two of these outcomes.
Operation performed successfully - which maps to result = 0
Operation performed with errors - which mapps to result = 1.
Now I have a workflow where the result was clearly 1 - I can see in the container of the workitem that WIRESULT = 1.
yet the workflow has continued off along the path "Operation performed successfully".
As you can imagine, I'm slightly puzzled.
Is there anything that might have happened to my task/WF that could have distrupted the link between the task and the outcomes?
Several years ago and a different system 4.6C now ECC6 this worked just fine.
I could just build another decision step in the WF - but I don't think I should need to.
Edit - just been playing with the WF - did a check and got this message:
Indicator "Results Parameter" missing in BOR method ENQUEUE
Given that this is a standard method should I worry?
Any suggestions on what might be going wrong and especially how to fix it, much appreciated.
Cheers,
Chris
Edited by: Chris Paine on Apr 1, 2010 1:44 PM

Hi Aman,
yes I did bind all the container elements.
Perhaps I was not clear - the issue is that the workflow is following one of the "outcomes" of the task.
These outcomes are generally driven by the generic task container method WIRESULT.
Yet the workflow does not seem to follow this logic and is ignoring the value of WIRESULT and continuing with the default "outcome".
I have changed the WF to make a decision on the error message which is a parameter returned by the BOR method (and yes I have bound it) - so it works - but why is it that this behaviour (which I am sure used to work) no longer does?
Cheers,
Chris

Similar Messages

I have only one ID, but I have different passwords for my iPhone and iPad. How to fix that?

I have only one ID, but I have different passwords for my iPhone and iPad. How to fix that?

Hi Cristigil,
Are you talking about your lock screen passcode? If so, go into Settings>General>Passcode Lock, and Change one of your Passcodes to match the other.
Hope this helps!
Cheers,
GB

Maintain one PIR but for 2 different set of conditions

Hi Expert,
If i want to maintain PIR for material ABC, vendor 123, plant 1000 and purchase org 2000 but for this PIR i want to have more than one net price and order unit. In PIR i can only see there is one field to put the price in General view and only one order unit. How can i add another one for the same PIR? Currently i have to change it manually whenever i want to use the other unit and price. Can anyone please help?
Thanks

Hi,
If i understood your issue correctly. i.e you have different UOM for same Material.
Assuming EA and BX i.e BOX,
Now please check the folloiwng:-
1. see if you have defined Alternate UOM in Material master and defined X EA = 1 BX relations.
2. Check and define the Purchasing UOM i.e in Purchasing View as BX.
Now you can maintain the Net price in PIR for the Base UOM i.e EA and still get the price of the BX in you PO.
Hope this helps.
Thx
MJ

One Album But Sorted As Different Albums

I recently imported a cd that I bought into Itunes. The problem that Im having is that even though the artist may have some guest features on the album. It still sorts the album as one thats completely different. It makes cover flow look bad and everything else sloppy. Ive tried changing things in the INFO tab, and also in the SORTING tab. Ive removed track numbers placed them as a compilation and that work but now it shows Various Artis and all the songs or linked together. But now I have the Various Artist problem.

Not sure how removing track numbers can help here.
I think what you need to do is make sure that the Album Artist field is filled in with the same info on all of the tracks. Maybe fill it in with the primary artist or the name of the album instead of Various Artists.

How to work on one project but with two different computers

I'm editing a movie.
My computer might be overwhelmed with all the information - speed is slowed and it gets hot quickly.
I would like to use my second computer where I have cloud installed
to edit on the same timeline or in a different sequence to give my
main computer a rest.
Is that possible?
Thank you for your help!

As well as the reply from Anish about using your program on 2 computers, you need to ask in the program forum for how to best use the programs to do what you want
http://forums.adobe.com/community/premiere_elements/content
http://forums.adobe.com/community/premiere/content

My family has one iPad but multiple computers. How can I get a movie from my macbook onto the iPad when it was originally synced with her iMac without losing everything on the ipad?

Really want to get movies from my computer over to the ipad but don't want to sync it to my itunes (it is already sync'd to my wife's) Help!

Importing photos and videos to computer
http://support.apple.com/kb/ht4083

One File (But Only 1) shows as an icon in List View of a Finder Window

Finder windows has one inconsistency, but only for this one file, which is a JPG photo. In list view with the option to not show thumbnails (under Command J) Then I get generic JPG badges for each file. If I select: "Show as Icon" then I get a small photo icon for each photo. So far, so good. The problem is with one individual photo file. It always shows as a photo icon, regardless of how I set the checkbox for Show as Icon within a finder Window by sing Command J. So the problem seems to be with that individual file by itself. Using Command I for Show Information on the individual files does not give me any options or clues about how to control the presentation of the icon on its individual files.
Looking at the same image but with different file names or paths, then everything is normal and as it should be. The simple answer is simply erase the "goofy" file and replace it with a new version, but I want to understand what the OS is doing. The same issue with the same file was under OSX 3 and 4. I have 10.6 Snow Leopard now, but the issues was there with Tiger and so on.
An ideas?

It always shows as a photo icon
It sounds as if the file has its own custom icon, which is different from the "icon preview" that the system constructs on the fly when a custom icon is not present and you have also checked the "show icon preview" box in View Options. If you want to remove a custom icon, do a Get Info on the file, click on the icon at the top left to select it, and hit command-X.

Showing only those Keyfigures which has some values

Hello Experts,
We've the following layout:
Jan Feb Mar Feb
KF1
KF2
KF3
KF4
Need: On the start of the application, I only want to only those KF's, which has any value. and later if the user wants, they can add that back.
How can we achieve this functionality ?
Thanks & regards,
Jomy

Hi Tammy,
It was nothing specific to Planning.
I was just giving a use case.
The idea is to show only those Keyfigures which has some values but later I should have the ability to add it back to the view.
I would really appreciate your help in this.
Thanks & regards,
Jomy

When I try to update Apps, I get the "Your Apple ID has been disabled. I followed directions in support but nothing different.

When I try to update Apps, I get the "Your Apple ID has been disabled. I followed directions in support but nothing different.

Have you tried:
- Resetting Apple ID password
- Signing out of Apple ID and signing back in
Also is the correct Apple ID showing up when you try to update the apps?

Stat machine workflow task workflow status different values on different state activity(Approval level)

i have developed the State machine workflow in which i am using default workflow task
i have added one status dropdown and that is having approve or reject that i set using workflow task drop down values
now my requirement is that when my workflow goes to different approval i need to have different status values in dropdown
for example
on manager approval state activity i need to add additional status value forward to legal
but when it moved to next activity this task status field should show only approve and reject
in summary i need to have different status values for workflow task when it moved to different state activity(approval levels)
can we set these status field of task for state machine workflow programtically as well like for different approval level of task i need different status to be set for the dropdown of task status field
MCTS,ITIL

Hi Shahid Siddique,
I have seen a similar thread from you about this issue, create custom form for the seperate form is a considerable workaround, you can have a check whether it works.
http://social.technet.microsoft.com/Forums/en-US/9baa0c32-1cde-4c58-aa7c-3568ccf0cdc9/different-approval-level-of-task-i-need-different-status-to-be-set-for-the-dropdown-of-task-status?forum=sharepointdevelopmentprevious
Thanks,
Qiao Wei
TechNet Community Support

One SO but I would like Post Goods Issue from different Storage Locations?

Dear All,
Pls help me solve this issue below:
I have one SO, Item xzy, Qty = 300 but I would like to Post Goods Issue from different Storage Locations (Qty = 100 for each locations)
E.g I have 3 storage locations: A, B, C and need to assign Post Goods Issue authorizations to 3 users U1, U2, U3:
- U1 can Post Goods Issue from storage location A only (but cannot from B, C)
- U2 can Post Goods Issue from storage location B only (but cannot from A, C)
- U3 can Post Goods Issue from storage location C only (but cannot from A, B)
How can I assign the Authorization for users?
How can I create Outbound Delivery:
a. 1 SO --> 1 outbound delivery --> Post GI 3 times
b. 1 SO --> 3 outbound delivery --> Post GI
Thank you very much for your support
Cao Huy.

Hi Senthils,
Pls see my comment below:
For Authorization check for storage Location
1. GO to the following Menu path
Spro>Material Management> Inventory manangement and Physical Inventory>Authorization Management>Authorization check for Storage Location.
Here you have activate authorization tick for storage location and plant combination.
--> Done
2. Set authorization for Authorization object MM_MSEG_LGO thro Basis for the combination of movement type and storage location
for each user.
--> Done
There are 3 storage locations(A,B,C) in one outbound delivery, and when user 01 tries to Post GI this outbound, it means that the system will Post GI for all line items in this outbound, but user 01 has not authorization for location B, C.
How can user 01 Post GI from only location A in this outbound???
And then user 02 will Post GI from only location B in this outbound,
user 03 will Post GI from only location C in this outbound.
Thanks
Cao Huy

Need validation that ensures only one item has a value.

Hello,
I need a validation that ensures that only one item has a value. I want to allow a person entering information into a form to have the option to either select from a drop-down or enter something into a text box but not both.
I have found some information about validation of this type but I'm not sure how to use it. Here is what I found:
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
This validation ensures that only one item (ITEM_1, ITEM_2) has a value.
Example 5:
Assume a function similar to the following exists:
create or replace function sampleValidation (p_arg in varchar2) return boolean
as
begin
if p_arg= '1' then
return true;
else
return false;
end if;
end;
A validation of type PL/SQL Expression could then reference this function returning a boolean using the following syntax:
sampleValidation(v('MY_ITEM'))
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Please let me know how to implement this or give me another way to validate.
Thanks
Linda

Linda,
The best is to use a Validation of type PL/SQL Function Returning Error Text like this:
BEGIN
   IF :p1_item_1 IS NULL AND :p1_item_2 IS NULL
   THEN
      RETURN 'One of the items must have a value.';
   ELSIF :p1_item_1 IS NOT NULL AND :p1_item_2 IS NOT NULL
   THEN
      RETURN 'Only one of the items must have a value.';
   END IF;
END;Denes Kubicek
http://deneskubicek.blogspot.com/
http://www.opal-consulting.de/training
http://apex.oracle.com/pls/otn/f?p=31517:1
-------------------------------------------------------------------

Is it possible to deploy 2 SCOM 2012 R2 reporting in a SQL server which already has SCOM reporting of a different management group but with 2 different reporting instance.

Hi Experts,
I have a typical situation in the LAB environment. Hope some one helps. I have Installed a SCOM 2012 R2 with SQL 2012 SP1 in a single server (Management group 1). I have installed another management group on another server using this SQL server for its database
so i have everything going fine.
The first management group has its reporting installed in the SQL server. For the second i created a new named instance for that. But i cannot run the SCOM setup in the SQL server (Also holding the Management group 1 MS) as 1 st reporting is already there.
When i run the setup it is asking me to repair it. I don't get the install option so i can install the reporting for management group 2 in the named instance.
Default instance is being used by the 1st management group.
Can any one figure a possibility for installing 2 SCOM reporting services for different management groups in a same SQL 2012 server please.
Gautam.75801

Hi Yan Li,
Thank you for the reply. So as you are aware If i need to instal reporting, i need to run the SCOM 2012 R2 setup in the SQL server and select reporting and select the
instance and then mention the management server there right. I am not getting that option there it is asking me to remove or repair the existing installation as there is already a SCOM entire setup including reporting there. As it is a lab there is no problem
in testing. I have 2 reporting instances. Any suggestions for me on how to overcome this issue and deploy the second reporting in the new named instance ?
Below is the screenshot of the error what i am talking about when i run SCOM 2012 R2 setup to install reporting in the SQL server
When i click on add feature reporting is greyed out (As already 1st management groups reporting is installed)
When i click on remove or repair it
uninstalls the existing one. But i want both SCOM 2012 r2 reporting to be there(For both Management group). Is it possible ? If yes What is the trick to run the setup ?
Gautam.75801

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name.

A have new problem that has appeared in my Mac Mail. When I type a frequently used email into the 'To: line' it populates the correct name but with 8 different email addresses not associated with that name. I have gone to the window pop-down to 'previous recipients' and deleted that addressee as well as all the email addresses it is assigning to that name. I have also deleted the account entirely from my address book. I have have run repair permissions and also full defrag in iDefrag. Still the problem persists. Any suggestions?

Hello CarolineLongEaton,
I noticed you posted this problem quite a while ago and wondered if you managed to have it fixed in an alternative way then posting here. It is too bad no one has posted a solution here. I have a similar problem and if you have had yours solved since this occurance how you accomplished it may help me with mine. I am interested to know what you have done about yours.
If you are interested in comparing the problems to see if your solution (if you have found one) might help me also then here is the link to the discussion.
https://discussions.apple.com/thread/6116927
If your problem has not been solved then I will comment here again if/when my issue is resolved as it may help you too. My hope here is that we may help each other. To quote you "all ideas gratefuly recieved". I hope your problem was resolved, ernestly for your sake and selfishly for mine also. I wish you and yours a great day!
dofromon

When I run an Utilities check on the HD. I always get a prompt-SUID System/Library/CoreS has been modified and will not be repaired. how can i access this to be repaired. Most files are corrupted by messages that they are one thing but should be another

When I run a system utilities check and select HD. i always get a prompt the the SUID System/Library/CoreS has been modified and will not be repaired. How can I access this file so that I may repair it? Left unrepaired . There are a lot of files that do not have the correct code. They are one thing but should be another

Hello there, toestothenose.
It seems that you may not have gotten the entire message into your thread here, but the following Knowledge Base article offers a good resource on which messages from Disk Utility's Repair Disk Permissions can be safely ignored:
Mac OS X: Disk Utility's Repair Disk Permissions messages that you can safely ignore
http://support.apple.com/kb/ts1448
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

_WI_RESULT has one value but workflow follows different path

Similar Messages

Maybe you are looking for