WIC-1ENET 1700 doesnt want to work

I have a 1720 router and a WIC-1ENET when i first installed the Card it worked fine but my software package didnt have inter-vlan communication so i have upgraded to several different Options (i picked out software that cisco said could work with my router and wic card) but now i keep getting this error message
"%PQUICC-1-UNKNOWN_WIC: PQUICC(0), WIC card has an unknown ID of 0x39"
i am fairly new to all of this but thats why i got it so if anyone has any ideas let me know
Also i'm running c1700-k9o3sy-mz.122-26
Thanks
mike

Cisco WIC-1ENET Software Requirements
The Cisco WIC-1ENET card requires Cisco IOS Release 12.2(2)XJ or later if the card is installed in any WIC slot other than slot 0 or if more than one card is installed.
The card can be used with Cisco IOS Release 12.2(4)T, but the card must be installed in slot 0 and only one Cisco WIC-1ENET card can be installed in the router.

Similar Messages

  • HT201263 my ipad stil doesnt want to work after i did all the steps

    my ipad doesnt want to work i forgot my password and all it does is ipad dissabled connect to itunes!!

    Could use some more info.
    What version itunes are you using? (update to latest version)
    Are trying to sync via a mac or pc? (what version OS is on pc)
    When you connect ipad to computer, then open itunes what happens? Do do see the pop-up message that reads: 'itunes has detected an ipad in recovery mode.....?
    If You Are Locked Out Or Have Forgotten Your Passcode
    iTunes 10 for Mac- Update and restore software on iPod, iPhone, or iPad
    iPhone, iPad, iPod touch: Wrong passcode results in red disabled screen
    iOS- Understanding Passcodes
    If you have forgotten the restrictions passcode
    http://support.apple.com/kb/HT4213

  • HELP ME IPOD DOESNT WANT TO WORK

    my ipod is a 80 gigz and i dont kno wat happened all my songs got deleted and now i cant put them back on because when i sync with my computer my ipod doesnt want to sync. i dont know what to do. i tried formating the ipod or using a software update but it doesnt work. is it the wires or what. please help!!!!!

    What happens when you try to restore?
    If it is asking for the passcode then
    Place the iPod in Recovery Mode and restore via iTunes.
    iOS: Wrong passcode results in red disabled screen
    If not successful, try DFU mode.
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

  • Itunes doesnt want to work on windows 7

    ive been trying to download itunes for my new iphone, i have a windows 7, but everytime i download it i get this message...
    "An error occurred during the installation of assembly'Microsoft.VC.CRT.type="win32".version="8.0502727.6195".publickeyToken= "1fc8b3b9a1e18e3b".processorArchitecture="x86".Please refer to Help and Support for more information. HRESULT:0x800073712."
    Ive already tried downloading it on different browsers but still it doesnt work.
    any help would be appreciated.

    The suggestions in this thread may help:
    http://discussions.apple.com/message.jspa?messageID=10526839
    Regards.

  • My ipod just doesnt want to work on my pc

    So I just fixed my ipod, by replacing the broken hard drive. The ipod itself was out of warranty so I figured I take a crack at it. Anyways the transplant was successful and I got it up and and running. The problem is I cant get my pc to recognize it and I HAVE TRIED EVERYTHING ON the apple help page. So I thought there was something else wrong with my ipod so before giving up I took it over my friends house and hook it up over there and instantly it poped up and let me format it and update it and let me name it with itunes. So I thought yay! I fixed it. So I got home later that night and plug it in my pc and it took like 5 min for itunes to open up, but finally I started transeferring music from itunes to it. It was taking really long so I decided to go to sleep and get to it in the morning. But when I woke up the ipod was turned off and wouldnt respond to me pushing any of the buttons so I tried unplugging and plugging the cord in and it popped up with this battery symbol that doesnt do anything but sit on the screen. Its a giant battery with a lighting bolt on it and it doesnt appear to be moving. It does this with all my pcs and at my friends house it actually moved and charged up. I don't know what to do is it just to dead to revive with the usb cord or is my pc messing something up? I run windows xp and so does my friend. Any Ideas?
      Windows XP Pro  

    Sorry to hear you are still having problems.
    The only other thing other than what you mentioned would be some power saving setting in BIOS(BasicInputOutputSystem)
    that is interferring with iTunes. If you try going into the BIOS, you should be very careful in there. Your power supply might not be powerful enough on your computer, so I'd check that first. If you don't know about BIOS,(perfectly normal-I consider myself somewhat of a nerd) I suggest getting the help of some "computer expert" to do it. Yet of course, it is your choice, and(after getting the approval of your parent(s) if you are a minor and/or the owner of the computer if you do not own it) You could always do some research on the web and try to do it yourself. Be careful and good luck!

  • Ipod doesnt want to work now

    Hi,
    I have had an IPOD shuffle for about 2 months now and it has worked perfectly fine on my pc. But last week my ipod just went dead. I was about to play some music when the lights on my ipod started flashing alternatly. When I got back home I plugged my IPOD into the same USB slot as I have been using for the past 2 months, XP and itunes cannot find the IPOD, I have reinstalled the drivers for the IPOD several times, I have also tryed every USB slot on my pc, and i have taken out any other USB connections that have been recently added since I have had my IPOD.
    Please can someone help me!!

    Many people, including myself, are having the same problem and Apple doesn't seem to have a solution. I've spent 2 weeks trying different cures, but to no avail.

  • Adobe Camera Raw program doesnt want to work.

    I have used Camera raw previously and now that I have to use it via the internet and pay a subscription it wont enable?
    I bought the CS6 program last year and used it fine, then I needed Premiere pro for my studies so hence having to get the whole package and being charged a monthly fee.
    My RAW comes up with a message that sais "Camera Raw editing requires that a qualifying product has been launched at least once to enable this feature."
    Any help would be awesome as I cant do anything now. Grrrr

    That error message usually means you need to launch Photoshop at least once and open a raw file in ACR through Photoshop.
    Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • My iPod Touch screen is unresponsive and doesnt want to work anymore.

    i have an iPod Touch 3rd Gen. It has the 5.0.1. update! Right now when i touch to try and slide open it doesnt follow my finger and its really upsetting.
    Yes i have...
    washed my hands to make sure no water or grease or anything is on it
    wiped the screen with a dry cloth
    RESTORED IT TI FACTORY SETTINGS, BASICALLY MAKING IT A NEW iPod
    and still NOTHING! It just sits there and not even let me use it.
    And when i press the home and power button for a reboot it then tells me to plug it into iTunes and when i do it acts fine but 30 minutes later IT DOES IT AGAIN!!!!!!!
    Help, PLEASE?????

    When restoring to factory defaults/new iPod does not solve the problem it is likely due to a hardware problem. Then an appointment at the Genius Bar of an Apple store is in order.

  • How can i get my itunes to sync to my ipod if it ask to redownload the 64bit version of itunes. I did it like 10 times and it still doesnt want to work.

    it keeps asking to redownload the 64bit itunes and i keep downloading the same thing over and over again. please help. Thanks in advance!

    Might be your PC, not iTunes.
    iTunes for Windows: Gathering and using iTunes Diagnostics

  • Xperia Z2 backlight doesnt want to work

    I placed my phone in a sink of water to test it out, and triple checked to make sure all the flaps were closed... But when i took it out, the backlight dimmed, and went out. Its strange because the phone is still responding, but you just cant see anything? Possible solutions to this problem?

    Try to force shutdown:
    http://userguide.sonymobile.com/referrer.php?region=global-en&product=xperia-z2#!Resetting-your-devi...
    All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

  • Xbox doesnt want to work with my computer.

    i just bought my wrt54gc so i could hook up to xboxlive and browse websites on my computer at the same time. everytime i get on my computer my xbox loses the internet. when im in the middle of a match or just chatting with friends my internet cant bring any pages up. im running 4megs on a cable modem. do i need a faster connection?

    access the router using http://192.168.1.1 ... logon using the "admin" password .. change the mtu settings to 1364....
    also ensure that you have not assigned same static ip addresses to both , the computer and the xbox live .. apart from this i find no reason , why the computer  should make the xbox live go offline.....let me know if any further help is required....

  • My Spry Menu doesnt want to work. Please help!!!!!

    Hi,
    My website is www.jumpingbeanpartyrental.com my navigation menu after I uploaded my files to my server are vertical using bullets, its supposed to be horizontal. I found the post below:
    "First download the spry updater I pointed you to, close dreamweaver and open the adobe extension manager. Select dreamweaver in the extension manager, then select install from the menu options, navigate to the spry updater extension and select this, then select o/k to all on-screen prompts.
    Once the spry updater is installed open dreamweaver. Open the html page with the spry menu and delete the 'old' css file, select the spry updater from the Site menu item, (main dw menu) select the item for the spry menu, and click on update.
    Upload the html file and all your spry assets to your server."
    I downloaded the spry updater, but when I open dreamweaver my spry updater from the Site menu is not active. So i cant click on update. I dont know what to do.............. Please help.......... Im not an expert on these, if you know the answer to my problem,PLEASE give me step by step answer.
    Thanks in advance,
    V

    Hi again,
    Like you know I have been trying to fix my website (navigation bar). Somebody fixed the navigation bar through FTP, a few days after he did it I had to made some changes to my website (using dreamweaver and then uploading my files to godaddy), after the uploading I checked my website and the pages that I made the changes where all messed up like at the beginning. Rentals, Packages and a few others are with that issue.
    Dont know if you can help me with this, like i said in my earlier messages Im not an expert.
    I appreaciate anything you can do for me.
    again my website is www.jumpingbeanpartyrental.com
    Thanks again,
    V

  • Classic doesnt want to work for me heeeeelp!!

    I have a iBook that just wont let me use classic i've tried everything the same message keeps popping up when i try to start it "the system folder on the startup disc only functions on the original media, not if copied to another drive". Please help me i have many games that i need classic to run off...

    you'll get that message if you drag n drop copied the os 9 system folder from the/an os9 boot cd as opposed to doing an actual install.
    you should probably just toss the ineffectual system folder (os9)
    boot from an os9 install cd (ie the system install - beware of the 'system restore' cd) and hit the additional installs or dig up the os9 install pkg.
    you can also boot into x, run disk util, and under 'file' hit fix os9 permissions. then bring up the os9 pref pane and rebuld the os9 desktop.
    one more thing that is often neccessary is to get the ui updates to 9 for x. there's probably a straightforeward way to do it, but i've found that starting os9 w extensions off triggers the update. let it update, stop os9 then start it regular.
    good luck and i know how ya feel. i still got fly!, connectix vgs and a coupla others i like to revisit like nhl'93 running under virtual pc 3 and drdos7. (is that weird? - i've given up on castle wolfenstein (original on the ][+)
    kysoti,
    jim
    Apple ][+   Mac OS X (10.4.5)   G4 mirror, ibook3, 6400, se, etc

  • Decided it doesn't want to work anymore

    I've had the iPod Remote for about three months now, and it recently decided that it doesnt want to work properly. I can adjust volume fine, but pausing and skipping tracks won't work. Any ideas?

    I don't think that there's anything you can do with the radio/remote except get it looked at by Apple.
    Maybe take it to a store near you?

  • 1750 dial backup with WIC-1ENET

    Does anyone have dial backup working with a DSL or CAble link on the WIC-1ENET card as the wan link?
    My dial backup doesn't automatically come up when using the WIC-1ENET card. It does work correctly when I use a serial connection as the WAN link such as the WIC-1T card.
    Cisco stated something about the E0 interface not sensing the change which caused the dial backup not to come up without pulling the ethernet cable out of E0.
    Any help would be greatly appreciated.
    Thanks

    Hi
    Hope this helps...
    You need to run object tracking feature to enable automatic fallback.
    http://www.cisco.com/en/US/partner/docs/ios/12_3/12_3x/12_3xe/feature/guide/dbackupx.html
    regds

Maybe you are looking for