WIC for 2x data E1?

For Cisco 2921, which module is the correct one if I have 2x E1 handoff from provider for data-only MLPPP? If I don't need voice, would I still need to buy a uc license to use the VWIC3?
VWIC3-2MFT-T1/E1
HWIC-2CE1T1-PRI
Thanks.

Hello,
VWIC3-2MFT-T1/E1 is fine.
Else you can make use of VWIC3-2MFT-G703 which support unstructured E1 also.
Krishna

Similar Messages

Looking for Calendar functionality for a Date Variable

Hi Experts,
Currently iam creating a WEBI Report where the source system is SAP BI System. I have a BEx Query with some characteristics at the row level and keyfigures at the column level. I have a Date Interval Variable (Based on 0DATE and optional), where the user will input the From and To date to execute the query. I have created the universe on top of this query, but date inteval variable appears as a character in the form of LOV. When i use this universe and buid the report in WEBI, the User Prompt for date is appearing as List of date values for this date interval variable, where as my requirement is to have date calendar for this date interval variable.
I did some r&d on top of this, when the date varibale as single value and optional, iam able to get the date calendar, but when i use the Date interval Varibale it takes as a character. I searched the forum, but i didn't find any solution.
Is it possible to have a date calendar for a date interval variable in BEx?? or its is only for single value date varibale.
Kindly suggest
Regards
Santosh

Hi,
you stated it correctly that the calendar shows up in case of a keydate and in case of a single value but not in case of a range.
in addition the underlying characteristic needs to be type DATS
Ingo
Edited by: Ingo Hilgefort on Dec 8, 2009 1:35 PM

I need the Log Report for the Data which i am uploading from SAP R/3.

Hi All,
I am BI 7.0 Platform with Support Patch 20.
I need the Log Report for the Data which i am uploading from SAP R/3.
I extract the DATA from R/3 into BI 7.0 DSO where I am mapping the GL Accounts with the FS Item. In the Transformation i have return a routine on the FS Item InfObject . I am checking the Gl code into Z table for the FS Item .
I capture the FS item from the Z table then update this FS item to Infobject FS item.
Now i need to stop the Data upload if i do not find the GL code in the Z table, and generate report for all GL code for which the FS item is not maintained in the Z table.
Please suggest.
Regards
nilesh

Hi.
Add a field that you will use to identify if the GL account of the record was found in the Z table or not. Fx, create ZFOUND with length 1 and no text.
In your routine, when you do the lookup, populate ZFOUND with X when you found a match (sy-subrc = 0) and leave it blank if you don't find a match. Now create a report filtering on ZFOUND = <blank> and output the GL accounts. Those will be the ones not existing in the Z table, but coming in from your transactions.
Regards
Jacob

About delta loading for master data attribute

Hi all,
We have a master data attribute loading failed which is a delta loading. I have to fix this problem but I have two questions:
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
2. Could you please let me know the detailed procedures to perform this delta loading again ?
Thanks a lot

Hi...
1. how can I find the those delta requests because I need to delete all these failed requests first, am I right ? Master data is not like cube or ods that we can find the requests in Manage, for master data how can we find them ?
Look.....for master data.....no need to delete request from the target..........just make the status red.......and repeat the load.....But problem is that master data sometimes does'nt support Repeat delta..........if u repeat......then load will again fail with Update mode R.........in that case u hav to do re-init.......
1) delete the init flag.......(In the IP scheduler >> in the top Scheduler tab >> Initialization option for source system)
2) Init with data transfer(if failed load picks some records)..........otherwise .....init without data transfer.....if the last delta failed picking 0 records.......
3) then Delta.......
2. Could you please let me know the detailed procedures to perform this delta loading again ?
1) Make the QM status red.........to set back the init pointer.......
2) Repeat the load.....
After that.........if again load failed with Update mode R.....
1) delete the init flag.......
2) Init with data transfer(if failed load picks some records)..........otherwise init without data transfer.....
3) then Delta.......
Regards,
Debjani.....

For existing data in BI, client need to take a call to park the same from s

hi,
friends,
For existing data in BI, client need to take a call to park the same from safety point view by copying the existing ODS
is it possible?if it is possible give me details.
thanks&regurds
sivaji

hi,
well when you copy an ODS only the structure is copied. to load the data you might need to create transformation and DTp to load data in the new ODS.
You need to load data manually. Copying the ODS will only copy the structure.
Regds,
Shashank

Data Federator XI 3.0 using DB2 VARCHAR FOR BIT DATA Column?

We have a column in a DB2 database that is defined as VARCHAR(16) FOR
BIT DATA.
We are using the suggested IBM JDBC driver, db2jcc.jar, against a DB2
OS/390 8.1.5 version database.
The Datasource column displays a data type of NULL, indicating the DF
does not understand or cannot handle this IBM data type.
We have two issues.
First, target tables are not able to return any columns, regardless if
we exclude columns defined as NULL as mentioned above. We see the
'Wait' animation for a very long time when we use the 'Target table
test tool' option. Selecting to display the count only, returns zero.
We are able to fetch and view non-NULL column data when using the
'Query tool' under the Datasource pane.
I also get the same result when using the 'My Query Tool' in Server
Administrator; a selection agains the sources returns data while
selecting from a target table returns no data. Also, a 'select
count(*)' returns zero.
The second issue is in mapping a relationship between two DB2 tables
where the join is between two columns of the above mentioned type
(NULL).
The error we get back when we use "Show Errors" is "The types
'NULL' (in 'S1.PLANNEDGOALID') and 'NULL' (in 'S2.PLANNDEDGOALID') are
not compatible.". When reviewing the relationship, a dashed red line
appears instead of a solid grey line between the two tables in the
"Table relationships and pre-filers" section of our mapping pane.
The following query returns an error via the Server Administrator
Query Tool; "Types 'NULL' and 'NULL' are not compatible for operator
'=' (Error code : 10248)".
select count(*)
from
(select s1.CASEID, s2.PLANNEDGOALID, s2.NAME, s2.PLANNEDGRPSTTYCD
from "/DF_CMS_ODS/sources/CMFSREPT/CMSPROD.PLANNEDGOAL" AS s1
,"/DF_CMS_ODS/sources/CMFSREPT/CMSPROD.PLANNEDGOAL" s2
where s1.PLANNEDGOALID = s2.PLANNEDGOALID)
Here are the properties settings in the Resource Connector Settings
for jdbc.db2.zSeries we are using.
capabilities: isjdbc=true;orderBy=false
driverLocation: drivers/db2jcc_license_cisuz.jar;drivers/db2jcc.jar
jdbcClass: com.ibm.db2.jcc.DB2Driver
sourceType: db2
supportsCatalog: no
urlTemplate: jdbc:db2://<hostname>[:<port>]/<databasename>
Here are the Connection parameters as defined for the datasource in DF
Designer.
Defined resource: jdbc.db2.zSeries
Jdbc connection URL: jdbc:db2://DB2D03:50000/CMFSREPT
Authentication: Use a specific database logon for all Data Federator
users.
User Name: x
Password: hidden
Login domain: -- Choose a defined login domain --
Supports Schema: checked
Schema: is empty
Prefix table names with schema name: checked
Supports catalog: unchecked
Prefix table names with the database name: unchecked
Table types: TABLE and VIEW
So, the following is the two questions we require answers for...
Is this a limitation of Data Federator?
Is there a work around short of changing the datatype in the database.

Hi Darren,
The VARCHAR() FOR BIT DATA is a binary data type and Data Federator does not support binaries. But if in your case, it makes sense to map this column to a VARCHAR data type you can configure the DB2 connector to view this column as a VARCHAR.
Your column can be mapped explicitly to a data type of your choice using a property: castColumnType.
This property can be set updating the resource you selected when you registered you DB2 data source.
If the resource is "jdbc.db2", then:
1. Launch Data Federator Administrator
2. Click on "Administration" tab
3. Click on "Connector Settings"
4. Select the right resource: "jdbc.db2"
5. Click "Add a property"
6. Select "castColumnType"
7. Set its value to: VARCHAR() FOR BIT DATA=VARCHAR
8. Click on Ok
You should see this column as a VARCHAR.
Regards,
Mokrane
PS: For the target table issue, we have forwarded your mail to the Data Federator Designer team.

Unable to generate "Export data source" for Master data infoobject

Hi Gurus,
I'm in BW 3.5
I need to generate "Export data source" for a master data info object.
I followed below steps:
I ticked the checkbox "Characterist. is export data source" in the master data Info object maintenance screen.
In the Infosource area, for the desired Infoobject --> Right click --> Generate export datasource --> a dialog box displays saying "The generation of DataSource was successful"
Problem:
Even after refreshing, etc.. I couldn't find the generated datasource 8**** for the above master data. I also tried to replicate the datasource from the myself source system, but couldn't find it even there. I don't know where the generated export data source is hiding ???
Could anyone please help ????
Thanks,
Venkat

Hi Venkat,
I guess that after creating an export datasource for infoobject this DS should appear in the RSA1-Source systems - MYSELF - datasource overview (with name starting with 8). Since it's a datamart, it should appear also as system generated infosource. And in this case you would be able to assign in URs of data target the appropriate infosource (make sure that in Infoproviders tab of RSA1 you have inserted your infoobject as a data target).
However, there are some bugs related to export data source. CHeck if you see you export data source in RSA6.
If you don't see it - consider applying OSS Note #816892 - "30BSP26: Export DS for master data is not generated".
Note #876845 - "30BSP29: InfoObject change: Export DataSource not adjusted" is also may be useful.
-Vikram

How to create a RFC destination for extracting data to HANA

Hello All,
Could someone help me in providing a document or note on how to create a RFC destination for extracting data from SAP data source to HANA using SAP LT replication server ?
I am able to create a data base connection while transforming data from non SAP data source,but wasnt able to transform data which is from SAP abap tables .

Hi Venkatesh,
In SM59 t.code we create RFC destinations.
Go thru the video link for creating RFC destinations step by step
How to setup a trusted RFC connection between SAP systems: a step-by-step guide - YouTube

Date fields are showing as / / in DSO for blank dates or no dates

We are loading flat file data to DSO and the date fields are showing as / / in DSO for blank dates or no dates in the flat file source system. We don't want to see this / / and instead of this, we would want to this field in DSO to be in blank. Please help how to achieve this. Is there any way to do this transformation. If yes, then can you please provide the sample coding.
Advance Thanks,
Christy

I have added the code and data loading is successful. while DSO activation, it is failing. The error message is,
Value '#' of characteristic 0DATE is not a number with 000008 spaces.
It seems that we need to change the code. Can you provide me the corrected code please. Thanks.
Christy

Since last software update, pre-paid internet does not work anymore. Get "you have not signed up for a data plan" message. Pre-paid acct is in order! What's up???

I have had an iPad 3G for more than a year now. I did not get it with a SIM card, since I expected to use almost completely at home, where we have wireless internet. Eventually, I decided it would be handy to be able to take it on the road, and signed up for pre-paid Internet with KPN (national Dutch telecommunications company). That worked fine, until the last big iPad software update. Since then, whenever I try to make a connection outside the house, I get the following message…
Mobile Data Account
You have not signed up for a data plan.
Would you like to set up a new account?
If you don’t, you can do it later in Settings.
…with the options of ‘Later’ or ‘Now’ to press. If I press Now, I get a screen “Please wait while the page is loading – this should only take a few seconds to complete.” But it never does, the ball just keeps spinning and spinning and spinning….
To my mind, with pre-paid internet I should not HAVE to set up a Mobile Data Account in the first place. I’ve checked with KPN, and my account is completely in order. I’ve checked with the local Apple store, and the geniuses say they’ve never seen this. Can anyone help me?

I updated to 3.6.4 and when I went to NetFlix to watch the next show of a series, it said
something like
Installation complete, restart your browser.
I restarted browser, same problem. Restarted comp. Same problem.
I updated Adobe Flash 10.1, still same problem.
But able to watch some vids on other sites, but full screen gave me the big blank white screen with audio only, had to click around in the dark ( so to speak) to find the minimize button.
I did a System Restore to before the Firefox and Adobe updates.
I then did not update Firefox as recommended and went to NetFlix and wellah, i can view the movies again.
And Full Screen is fine.
I then experimented and updated Firefox only, went to NetFlix and got same msg with no viewable shows.
So did a System Restore once more.
Staying at 3.6.3 for a while longer until I know I can watch my movies.
I don't own a TV, so this is my only form of an occasional escape.
I do hope this is figured out soon.
With what I have done, it seems to be Firefox, Not Flash.
Good Luck to us all.

AP Invoice Aging Report for past date

hi guys,
I am running R12.
my requirement is to run AP invoice aging report for past dates (same like AP Trial Balance Report), but the seeded invoice aging report has no option to do so.
would appreciate some help
thanks in advance
Ravi

Hi Senthil,
I am running R12.
my requirement is to run AP invoice aging report for past dates (same like AP Trial Balance Report
if u have any solution to this , please suggest me how to resolve this requierement.
thanks in advance
Ravi
mail:[email protected]

Special GL asking for Due Date

Hi SAP Gurus,
When I am trying to post the customer invoice with t.code F-22 and put the Special Ledger indicator it is asking for Due Date as a mandatory field but it should not be because of the payment terms.
Is there any configuration I can use payment terms with special GL indicators for customer and vendor documents.
Is there an option to get the payment terms from the company view when we are creating invoices in special GL indicators. Because the due date that appears, instead of baseline date, payment terms and days as in a common invoice.
Regards,
Sim

Go to T.Code - OB41 (Field Status for Posting Keys)
Selct Posting Key - 01 & Go inside
Go Inside to Group - Payment Transactions
& Check Out whether Due Date Field is with Required Entry or not. If it is so then make it Optional.
Similarly, Check out Special GL Reconciliation A/C . Through FS00,Check out the Field Status Group of the same (Mostly, it will be G067- Recon.A/Cs) & make the Due Sate Field Optional there as well in Payment Transactions.
Regards..
Ameya....

Stock report with value and qauntity for given date not month wise

Hi gems,
can any body give me the standard report for Stock value and qauntity for given date not month wise at storage location level

Hi
check the report S_P00_07000139 with the option inventory and raw material report- detail and selection date (from, to date same). List will give opening & closing balances with goods movment and their values.
Thanks

Devolped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Devloped an ALV report for daily cash receipts for selected date range

hi,
             how to devlop an ALV report for daily cash receipts for selected date range.for this report what are the tables and fields we have to use.what is the selectionscreen&what is logic.give me sample report.

Hi,
You can develop simple reports using Report Painter.
You may be also interested in:
Check report SAPMF05A for credit memo
See the following Std reports on Payment Advices execute the Tcodes:
S_ALR_87009888
S_ALR_87009889
S_ALR_87009890
S_ALR_87009891
S_ALR_87009892
S_ALR_87009893
S_ALR_87009978
S_ALR_87009979
S_ALR_87009980
S_ALR_87009981
S_ALR_87009982
S_ALR_87009983
S_ALR_87010056
S_ALR_87010057
S_ALR_87010058
S_ALR_87010059
S_ALR_87010060
S_ALR_87010061
S_ALR_87010066
S_ALR_87010067
S_ALR_87012106
S_ALR_87012107
S_ALR_87012108
S_ALR_87012109
S_ALR_87012110
S_ALR_87012111
S_ALR_87012116
S_ALR_87012117
S_ALR_87012200
S_ALR_87012201
S_ALR_87012202
S_ALR_870122
S_ALR_87012204
S_ALR_87012205
S_ALR_87012350
S_ALR_87012351
S_ALR_87012352
S_ALR_87012353
S_ALR_87012354
S_ALR_87012355
sample ALV report:
tables:
marav. "Table MARA and table MAKT
Data to be displayed in ALV
Using the following syntax, REUSE_ALV_FIELDCATALOG_MERGE can auto-
matically determine the fieldstructure from this source program
Data:
begin of imat occurs 100,
matnr like marav-matnr, "Material number
maktx like marav-maktx, "Material short text
matkl like marav-matkl, "Material group (so you can test to make
                        " intermediate sums)
ntgew like marav-ntgew, "Net weight, numeric field (so you can test to
                        "make sums)
gewei like marav-gewei, "weight unit (just to be complete)
end of imat.
Other data needed
field to store report name
data i_repid like sy-repid.
field to check table length
data i_lines like sy-tabix.
Data for ALV display
TYPE-POOLS: SLIS.
data int_fcat type SLIS_T_FIELDCAT_ALV.
select-options:
s_matnr for marav-matnr matchcode object MAT1.
start-of-selection.
read data into table imat
select * from marav
into corresponding fields of table imat
where
matnr in s_matnr.
end-of-selection.
Now, we start with ALV
To use ALV, we need a DDIC-structure or a thing called Fieldcatalogue.
The fieldcatalouge can be generated by FUNCTION
'REUSE_ALV_FIELDCATALOG_MERGE' from an internal table from any
report source, including this report.
The only problem one might have is that the report and table names
need to be in capital letters. (I had it )
Store report name
i_repid = sy-repid.
Create Fieldcatalogue from internal table
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
       EXPORTING
            I_PROGRAM_NAME         = sy-repid
            I_INTERNAL_TABNAME     = 'IMAT' "capital letters!
            I_INCLNAME             = sy-repid
       CHANGING
            CT_FIELDCAT            = int_fcat
       EXCEPTIONS
            INCONSISTENT_INTERFACE = 1
            PROGRAM_ERROR          = 2
            OTHERS                 = 3.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            I_CALLBACK_PROGRAM       = i_repid
            I_STRUCTURE_NAME         = 'marav'
            I_DEFAULT                = 'X'
            I_SAVE                   = 'A'
       TABLES
            T_OUTTAB                 = imat.
IF SY-SUBRC <> 0.
    WRITE: 'SY-SUBRC: ', SY-SUBRC .
ENDIF.
Hope this will help.
Regards,
Naveen.

WIC for 2x data E1?

Similar Messages

Maybe you are looking for