Wicd suddenly stopped working. weird problem.

Hi there,
I had a very happy first wireless experience with wicd for about 30 minutes. I even rebooted my laptop a couple of times and wicd still worked fine.
Then, following the Arch wicd wiki I disabled eth0 in rc.conf:
INTERFACES=(!eth0)
and rebooted. After that, wicd stopped seeing the wireless network. 'No wireless networks found' was the only message I got.
I then re-enabled the interface in rc.conf
INTERFACES=(eth0)
and rebooted, but that did not work. wicd still refuses to see the wireless network.
I don't know what else to do. Re-installing wicd does not help either.
Is there a way I can 'reset' wicd configuration by removing some file somewhere on the HD? wicd was working fine before disabling and re-enabling eth0.
Thanks for any help,
-Benton

this is very strange indeed. I have fixed other wicd problems by uninstalling wicd and deleting everything in /usr/lib/wicd and then reinstalling wicd. It might work for you.

Similar Messages

My Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. Any anwers

I receive Adobe updates on a regular basis without any problems. The other day, my Adobe Photoshop Elements 7.0 (Editor) function has suddenly stopped working. Windows cannot seem to solve the problem. I can open all the other function buttons without any problems just not the most important one which is the Editor Function. Has anyone experienced this situation and knows what to do?

Did you tried uninstalling and then installing it again?
Ankush

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

My MacBook Pro will not connect to my home wifi but will connect everywhere else. My other Apple devices (I-pad, I-touch, another MacBook Pro) connect to the router without problems. It was working fine but all of a sudden stopped working.Thanks!

try this.
get back into your router's settings and start deleting devices that are not connected to your router.
you can also delete the ones that are connected - they'll connect again.
on the DHCP side of it, increase the amount of users that can connect/log in to your router.
see if that sorts it out for you.
good luck.

My iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

my iphone 5 camera suddenly stop working and the shutter dont open after some minutes shutter open with some dolor stripes and it takes 2 or 3 days and again start working normaly it happens every 3 weeks.is this a soft ware problem??

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Change the channel on your wireless router. Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
 Cheers, Tom

Hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

hi, i have a problem that my macBook pro keys suddenly stopped working. The power button,volume keys, brightness keys and shortcuts do not work. Does anyone know why or how i can fix this problem?

My mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

my mac pro suddenly stops working (2011), connection to the monitor stops, but de tiny light on computer still on and all sound stops. what's the problem?

When the display turns off, it is not clear whether the computer has halted, or whether the display subsystem has failed.
Those tests determine whether:
a) Your Mac software had stopped working OR
b) Only the display had stopped working
If the pressing the Caps lock light on the keyboard lights the Caps Lock light on the keyboard, some software is still running -- your Mac has not halted.
If pressing Control-Eject on the keyboard, followed by the Return key shuts down your Mac, the software was still running.
¿Software was still running?
--Yes, the problem is ONLY in the display subsystem
--No, this is a computer-wide problem such as a kernel panic

I just brought my MacPro in for service and they replaced my hard drive. However, now my disc drive has suddenly stopped working! Is there anything I can do to fix this without having to take it back in for service, again!?

The nearest service center is 2 hours from my house and my computer isn't under warranty anymore, so I need alternative options. I'm just frustrated that my disc drive was totally fine until AFTER I took it in for service. I just paid a lot of money for a new hard drive from the apple store and now my disc drive has suddenly stopped working correctly. I tried with multiple CD's and DVD's...loading a disc, but my computer would just make a weird loading noise and then eject the discs. Now it has started fighting taking the disc, so I have stopped trying. Is there anyway to fix this problem without taking it in for service again and paying another boat load of money?
Thanks in advance for your help!

ShelbyMackenzieLynne,
when you say that your disc drive is damaged, do you mean your MacBook Pro’s hard disk drive, or do you mean its SuperDrive (the CD/DVD drive)?
When you’d updated your MacBook Pro to Mavericks, did the installation succeed, and subsequently freeze up? Or did it freeze up during the Mavericks installation?
Which version of OS X was installed on your MacBook Pro before you’d installed Mavericks?
Are you currently able to boot into the Mavericks recovery partition? To see if you can do so, hold down a Command key and the R key while starting up your MacBook Pro.

[SOLVED] Thinkpad Fn keys suddenly stopped working

I'm on ThinkPad Edge 14. For some reason(s) unknown, my Fn keys stopped working after I restarted Arch a few hours ago.
I've checked the BIOS, everything is fine (no settings unchanged). I tried checking if X (I'm on Gnome 3) can still detect the keys using xev (as outlined here: https://wiki.archlinux.org/index.php/Ex … oard_Keys) and the Fn key is detected as "XF86WakeUp" witht the keycode "151", so at least nothing is wrong with the actual physical button.
What's more weird is that, I tried booting from another Hard Drive into Ubuntu, and the Fn key also didn't work (it has worked fine previously). What could be causing this?
EDIT: Even weirder, Fn keys aren't working in Windows as well (I dual boot). BIOS's still unchanged, and this started happening when I was working with Arch, so I'm quite sure this can be fixed through Arch. Problem is, I don't know where to start. How can Arch affect Ubuntu & Windows when I didn't change BIOS?
Last edited by splatterdash (2011-08-28 22:32:23)

I found out the problem!
I tried checking the Lenovo forums about the problem and found this: http://forums.lenovo.com/t5/ThinkPad-Ed … d-p/323077
Apparently, it's possible that the Fn keys suddenly stopped working for no clear reason. In my case, it happened when I was on Arch, so I thought the problem was with Arch. Anyway, I updated the BIOS from Lenovo's site and everything's working fine now.
Thanks!

Photoshop CS4 64bit suddenly stop working

Having problems with Photoshop CS4 64bit version stop running for me giving me this error message with these details:
Problem signature:
Problem Event Name:    APPCRASH
Application Name:    Photoshop.exe
Application Version:    11.0.1.0
Application Timestamp:    499bfd16
Fault Module Name:    StackHash_0b5f
Fault Module Version:    6.1.7600.16385
Fault Module Timestamp:    4a5be02b
Exception Code:    c0000374
Exception Offset:    00000000000c6cd2
OS Version:    6.1.7600.2.0.0.256.1
Locale ID:    4105
Additional Information 1:    0b5f
Additional Information 2:    0b5f2ed00a0371f4956b3b2a23be79e0
Additional Information 3:    a274
Additional Information 4:    a2747fd43e73092b139f32555a88633d
It seems when i do something simple as typing text, it'll stop working and give me a "Adobe Photoshop suddenly stop working". My CS4 32bit version seems to working fine with whatever i'm working on. I'm running a fresh install of Windows 7 64bit Ultimate on a new computer Intel quad core with 4gig of ram if that helps. Sorry if this have been asked before but i couldn't find anything on these forums. Thanks in advance.

i deleted the prefs file and now i can open photoshop. but it seems as if it crashes if i open ANY file with ANY text, no matter what the font is.

Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly.

I recently purchased a new desktop computer and installed Adobe CS3 Master Edition on it and I get the following error:
Adobe Photoshop CS3 has stopped working: A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.
Out of the entire suite of tools only Photoshop will not launch. The weird thing is i also had the same Adobe programs installed on my laptop and I have not made any installation updates to that machine and i am getting the same error. I have always installed the same software on my two home machines with no problem until now. Any help is appreciated.
Thanks,
Andy

You'll probably going to have to uninstall, then re-install the application; but you need to provide a lot more information;
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!! SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.

The issue: Outlook to iPhone sync failure – Sync suddenly stopped working for calendar events but continued for contacts and notes.   Finally Fixed!!!
SUPPORT TEAM – PLEASE SEE THIS – Complete explanation of cause and correction steps.
The cause: It is now clear what caused this problem. For years I had several “all-day” events in my Outlook calendar (birthdays, anniversaries, etc.). In May 2012 I decided to make some of them one hour events so I could add alerts to remind me of the event. I did this by dragging them in Outlook to the time I wanted and expanding them to the time slot desired and then adding the alarm.
The symptom: Syncing stopped working for the calendar but continued working for contacts and notes. I didn’t realize sync was failing until months later when I missed two very important phone calls, so when I noticed it the cause was not obvious.
The failed attempts: I’m head of a software firm and my calendar sync is a crucial to my business life so I took this on with a vengeance. From a quick look at events in Outlook and the iPhone I could see that the problem started in May 2012. Events before May were in both Outlook and the iPhone but events after May were only one or the other. Unfortunately I had changed several other things at the same time relating to other events so again the cause was not obvious. MANY calls with AppleCare proved them incompetent so my internal IT guys assisted trying many things. We tried a huge number of calendar changes and several versions of iTunes, iPhone OS and Office as well as both iPhone 4 and 5, all without success.
The fix: After 18 months of frustration, MANY hundreds of $ expense and MANY hours of wasted time I saw a blog that had a calendar sync problem and it indicated all day events were related. I changed the display of the Outlook calendar to the list view, added columns so I could see “all day” event check marks as well as times of events, sorted on the “all day” event column to move them to the top, and for all events that were “all day” events AND had a start and end time, I removed recurrence and then added the annual recurrence back…
After I fixed all events that had BOTH “all day” set and had a start/end time, I tried another sync. It synced for the first time in 18 months!
Problem occurred May 2012 – fixed Nov 2013

Hi, to remove dummy '_ModGrp' entries, rather than crashing the 'Suppr' key on your keyboard, you can use this basic VBA macro (launched for instance from Excel).
It will recursively remove all '_ModGrp...' folders
Sub RemoveFolders_Click()
    Dim oOutlook As Outlook.Application
    Set oOutlook = New Outlook.Application
    Set objNameSpace = oOutlook.GetNamespace("MAPI")
    Call CleanFolders(objNameSpace.Folders)
End Sub
Sub CleanFolders(objFolders As Outlook.Folders)
    For i = objFolders.Count To 1 Step -1
        If Left(objFolders(i).Name, 7) = "_ModGrp" Then
            objFolders.Remove( i )
        Else
            If Not objFolders(i).Folders Is Nothing Then
                Call CleanFolders(objFolders(i).Folders)
            End If
        End If
    Next i
End Sub

HP Pavilion dm1-4000au Entertainment Notebook PC_Keyboard and Touchpad Suddenly Stops Working

Hi there,
I have an HP Pavilion dm1-4000au Entertainment Notebook PC (QG411PA) running Windows 7 Ultimate 32-bit for more than a couple of years already. During those times up until now, whenever my laptop is on standby for an hour or so, its keyboard and touchpad suddenly stops working, regardless if its running on battery or on AC power.
I always ensure that I have an external mouse in order for me to navigate properly and pull up the on-screen keyboard in order to type once that issue arises.
All appears to be updated in terms of Windows Updates and I even reformatted it, but issue still persists.
Is this particular issue that I am experiencing a harware issue? Perhaps a software issue? Or maybe a defective model itself?
Your prompt response is highly appreciated.
Sincerely,
Led
This question was solved.
View Solution.

Dear Customer,
Welcome and Thank you for posting your query on HP Support Forum
It looks like you are facing difficulties to resolve Touchpad Issues with your Notebook
We will surely assist you with this
Steps to drain the Static charge and loading default BIOS settings to resolve the issue
Step 01. Turn OFF the Notebook
Step 02. Un-plug the Power/AC Adapter and also remove the Battery too
Step 03. Press and Hold the Power Button of the Notebook for a full minute
Step 04. Now let's re-insert the battery back in and plug back the Power/AC Adapter
Step 05. Start the Notebook and keep tapping F10 Key during the startup to access the BIOS
Step 06. Once you get to the BIOS, Please press F5 or F9 Key to load setup defaults for the BIOS
Step 07. Now let's press Esc/Escape Key. Save Changes and Exit - Yes
Step 08. Now please wait till the Unit loads the Windows Operating system
Now please download and re-install the touchpad drivers for your Notebook from the HP Support Site
Please Click this Link to find more troubleshooting steps to resolve this issue
Hope this helps, for any further queries reply to the post and feel free to join us again
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
K N R K
Although I am an HP employee, I am speaking for myself and not for HP

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years .

My iTunes suddenly stopped working and doesn't recognize any of my devices and gives me a AMD error. I've tried several times to uninstall all Apple programs and reinstall to no avail. I'm running windows 7 on a Dell laptop. It worked fine for years then I decided to update my iPhone 4S and it didn't recognize it or any other iPod or iPad.
Can someone please help ?

I am having all sorts of problems with 9.1.1.Crashes and not only iTunes but I have to restart all the time.
GET TO WORK APPLE !!!!

Outputs Suddenly Stopped Working.

I have a 5th gen Ipod that I've taken very good care of. Until yesterday I've had no problems with it at all. I was using the Ipod in my car w/ my Itrip and the Audio suddenly stopped working. I assumed it was the Itrip not working correctly, so I plugged it into a set of speakers (via the bottom output) but that wasn't working either. Then I plugged headphones in and there is no audio feeding through the headphone output either. I can see on the screen that the songs are playing on the ipod, but apparently the outputs are not functioning correctly. I tried all of the "Rs" recommended in troubleshooting but those did not help. Any suggestions?

i have the exact same problem. Although i am able to here the clicks throught the headphones which makes me wonder that this is something with software. although i have restored and reinstalled and all that, nothing.
Anyone have a solution?

Ethernet suddenly stopped working for no apparent reason

My late 2011 MBP is usually functioning as a desktop with external display and keyboard/trackpad, so I have it connected via ethernet when it's on the desk. However, my connection suddenly stopped working for no apparent reason.......... BUT clearly not a router problem as there's no problem with the wifi connection. System Preferences > Network > Ethernet is telling me:
Status: Connected. Ethernet has a self-assigned IP address and will not be able to connect to the internet.
Dunno how this happened, as to my knowledge I didn't actually do anything to cause this problem, just randomly stopped working. Any solutions much appreciated, thanks :-)

Please post a screenshot of the Network preference pane. Be careful not to include any private information.
Start a reply to this message. Click the camera icon in the toolbar of the editing window and select the image file to upload it. You can also include text in the reply.

Wicd suddenly stopped working. weird problem.

Similar Messages

Maybe you are looking for