Wich is better in SOUND solutions??

hello there, I just want to know wich of this options could be better to create a home theatre system for movies and games. (for playing movies on my DVD and play games in my PC or play station)
Get a Creative speaker system and a DTSS Decoder + a sondblaster card
or
Get an .. for example Sony home theatre system. + a sondblaster card?
wich of those opcions do you recomend for the best SOUND experience?
Thank you very much for your time. :smileyvery-happy:

it depends on which set you buy from sony or from creative

Similar Messages

  • I transfered my music into my new mac into itunes media folder from an external, but it dosnt show in itunes.  I have to click on each one to activate it on itunes.  there has to be a better and easier solution.  help

    i transfered my music into my new mac into itunes media folder from an external, but it dosnt show in itunes.  I have to click on each one to activate it on itunes.  there has to be a better and easier solution.  help

    Thank you for your prompt response - I did as you said and did a drag and drop into the iTunes window - it imported and got my album art from the net. When I started Itunes with the shift key down I was prompted to choose a library but since I copied over the media folder and not the library folder I was unable to select that so I guess I will have to create a new library and add in all the music, videos, etc. unless I wait for my laptop and export the library or at least that seems to be the case? In short, all my data (iTunes media folder) is on my external drive and can be added to the blank iTunes screen but I can not choose a library folder. Is there anyway around completely making all those playlists again? I am not sure my laptop will survive the shop with data intact and really hate to start over on those.
    In an unrelated question - I collect old TV shows from the 1950's. Can I make playlists within the home video folder somehow?  In other words like one for Quiz shows, one for comedies, one for police and detective shows, etc. while I am remaking all my playlists for my music if I end up having to go that route?
    Once again thank you for helping me out. I am not too Itunes savvy and really appreciate you taking the time to answer.

  • Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping

    Excuse me, does any body can help me?
    Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping
    I need to know if the ACS support the AAA functions but from equal ip segments (ip overlaping) on diferent places.... with diferent client networks.
    We are implementing the ACS on a central site (our NOC), so each field engineer will be AAA from diferent sites, same ip networks and diferent places....
    We need to implement support activities where our field engineer get access on a cisco device on the client premises, but the point is that we have a field engineer force wich get access on each device on diferent places.
    With this scenary we need to decide wich is better: The appliance or the  ACS Server with VMware ESX
    ACS Server with VMware ESX
    CSACS-5.1-VM-K9
    CSACS-5-ADV-LIC
    CSACS-5-LRG-LIC
    CSACS-5-BASE-LIC
    CON-CSSPS-5ADVLI
    CON-CSSPS-5LRGLC
    CON-CSSPS-51VMK
    APPLIANCE
    CSACS-1120-K9
    CAB-AC
    CSACS-5-BASE-LIC
    CSACS-5.0-SW-K9
    CON-OSP-CS1120K9

    Just a quick question - have you looked at superwaba
    and wabajump? Superwaba is basically Java for pocket
    pc and palm, but wabajump allows you to compile to
    palm (not pocket pc). You can also use Eclipse for
    development in an applet - much quicker than deploying
    to device/virtual device. Small memory footprint as
    well.
    Cheers
    Andy StrattonThank you Andy. I'll try it. Have you tried to use Websphere Studio Device Developer ?
    I've tried version 5.5 but i found it not too comfortable.
    I'd like to know personal experiences of the whole stack of components and tools involved
    in the development process. We're trying to design the best environment for it.
    Kind Regards
    J.L Perez

  • Can apple put an update for ipod 6th generation so that it gives better quality sound?

    I have an ipod 6th generation and i have heard a lot about apple's popular white earphones. The problem is that my ipod don't give enough volume to enjoy music from those white earphones. Can apple bring something new in their updates to fix this issue???
    HELP !!!

    You must realize that the quality of sound has been compromised by the very fact of compression and equipment. You are never likely to experience the nature of a live event by listening on an iPod. The best solution is to get a better quality of earbuds/ earphones/ headphones to improve the playback experience. The higher quality headphones such as Bose, Sennheiser, Sony have capabilities to counter ambient interference ( Bose noise-cancelling for example), and they have a better quality speaker than the Apple earbuds. This standard issue bit of kit is more of a courtesy to iPod buyers so that they will have something right out of the box in order to listen to their music but they are not the highest audio quality. The best audio quality will cost every bit as much as, or even more than, the cost of an iPod. As for turning up the volume, that is a foolish undertaking that can have long-term consequences on your hearing. Tinnitus cannot be cured! You will live with it unto your last days.

  • Is the BSP extension better than this solution(Text and Image in Button)?

    Hi guys,
    I have a  concept question to decide whether a BSP extension is needed.
    I want to put text and image in htmlb button, and used the solution like below:
    <%
      data image type ref to cl_htmlb_image.
      data: image_string type string.
      create object image.
      image->id = 'back'.
      image->src = cl_bsp_mimes=>sap_icon( id = '@9S@' ).
      image->tooltip = 'Go back'.
      clear image_string.
      image_string = image->IF_BSP_BEE~RENDER_TO_STRING( page_context ).
            %>
            <xhtmlb:toolbarButton id      = "back"
                                  onClick = "back"
                                  text    = "<%= image_string %>" />
    But this solution is not desired by customer, since they don't think it looks nice. So is it possible to create my own BSP extension to get a nicer element?
    Thanks for any hint.
    Regards,
    Liying

    Hi,
    By a nicer element...did you mean to display a better image...or a nicer image ????
    if yes, the you can upload any image you need and then use it here...
    Tell me if you need more information...!!
    Hope this helps.
    <b><i>Do reward each useful answer..!</i></b>
    Thanks,
    Tatvagna.

  • Better Quality Sound with 5.1 over 4

    I recently started experimenting with?5. for xfi gaming instead of 4. (switching was the only way to get a sub channel with the xfi!) and there seems to be a big improvement in sound quality with 5.--sort of like the improvement you get switching from Prologic to 5. with movies ... Is this my imagination? Or did the rest of you notice an actual improvement with in-game sound when moving from four channels to 5.

    Hi there !
    Well I got the same problems, using a X-Fi Titanium PCIe, newest beta drivers (tried severals ones before) - but receiving the same problems like the poster above me.
    It also happens in WIN DVD 9 Plus, but I get this "problem" in 8 Speaker mode (I've got a Creative 7. Sound System).
    It's like a frame lag (skipping frames) - or like a "stuttering", happening sometimes every 20-30sec. from time to time every 4-5min.
    I guess it must be driver problem, but how should this get fixed?
    I reinstalled my OS (XP Pro 32bit), severals times in order to find out where it might come from.
    Also I think, that the PC has more than enough power to playback blu-ray.
    Please Creative, let us know if this issue is already known ! - (on a 2nd PC - with an older Creative Soundcard PCI Version, I don't have this problem there !)
    So it must be a related one esp. with the PCIe ! Versions !!
    Sys Spec:
    Intel E6600
    Asus P5E + 4gig RAM
    9800GTX+
    Creative X-Fi Titanium PCIe
    PLEASE HELP US WITH THAT - cuz it's very annoying to have with such expensi've hardware getting problems... (It can't be that cheap onboard Sound devices don't have those probs !!)

  • Has any one come up with a solution to fix the 5.1 surround sound solution

    I love Maverick, but i really miss my abiltiy to play music 5,1 surround sound. I have order two difffernt external sound card only to find they not compitible with Maverick. Is there a solution. If not come on Apple give us a hand!
    Thanks!
    Bob

    Hi there Roboco65,
    You may find the information in the article below helpful.
    Setting up iTunes and your DVD Player for digital surround sound
    http://support.apple.com/kb/ht4072
    -Griff W. 

  • What do I need for a better "bass" sound in my 2000 mustang V6?

    I have a 2000 mustang V6 and i want more bass! what are your suggestions for me? what do i need to buy and equipp to have this better sound?
    much appreciated!

    Better amp. More wattage and a decent brand.
    Subs. a nice sized sub anywhere between 10-15" is great.
    Anything i say is not a direct response from Best Buy or Geek Squad. I just post on here to add my insight.

  • PANDORA or SLACKER on THE X:   Wich is Better!

    At one time i use to listen to both of theses Music apps first on my BB Curve an then on my Android Phones.But as time went on
    other good music apps came about. So i did'nt listen to them as much.  An my favorate two apps are now Tune in Radio an
    Winamp. But i thougt i might give em a try again so i looked on the review boards on each of them an things diddn't look to good
    as many users or Paying subscribers area sayin there having many issues songs skipping badly an some of them not playing at
    all an as i said there are subcribers that are Paying for a year subscription for the higher Qaulity Music sound an No adds but it
    is'nt any better than the free Version.   So i thougt i'd ask on Here what our Contribitors think about the Two Apps.  Good , Bad , Or
    Give me Something Else. 

    To the contributors that wrote there post thanks : an i have used pandora my self an pute it thru a 8 hour run thru on my X an no song skipping or breaking up an it only stopped once. i did have to recharge the ol battries in Birtha but that was it. 
    If any other contributors would like to pute a post on your thoughts of these two or other music Players give a post an we thank ya For your Support.

  • The best surround sound solution for my room?

    I have a 32" HDTV but the speakers seem to be weak to my ears. I'm looking to get a few speakers and a receiver for my bedroom but have no idea on what exactly I should get. My T.V. sits in front of my bed on my dresser with my PS3 next to it. I thought about mounting my T.V. to my wall and setting a receiver on my dresser with two speakers hanging on each side of my T.V. I have also thought of placing one speaker in the top of each corner in my room, but don't know how to manage the wires. I have looked at the wireless speakers but just don't know exactly what to look for. What I really want is a few speakers on the same wall as my T.V. and a few opposite that wall so I can still hear it as if I was right next to it while lying down. I am just trying to get the very best possible sound from my cable box, laptop, and my PS3. I don't necessarily have a budget as of now but I will probably by the beginning of next year.

    Without knowing what your looking to spend its hard to recommend something.  Without buying separates the next best thing is the higher end HT in a box with either a Denon or Yamaha receiver even.  If low budget is what your looking for and your not expecting a great deal of amazing sound from the system then the Samsung, LG, and Sony HT in a box will work. Just remember your spending anywhere from $300 to $400 dollars on a complete system when an ok receiver  alone will cost about the same. If your room is relatively small the Budget friendly HT in a box will be fine though. So please just keep that in mind so you understand what your buying.

  • Are Barcodes supported better in Adobe solution than Smartforms/SapScript

    With SAPScript and SmartForms, it was not possible to print barcodes from SAP on Hewlett Packard ( HP ) printers without having a DIMM module installed on the printer itself. See OSS note 5196.
    I hope that in Adobe solution, the barcode support is no longer dependent on SAP's device settings but Adobe supports barcodes on HP natively? Any experiences?
    Is there a list of supported barcode types available?
    br: Kimmo

    Dear Anto,
    Your advice was not quite what I was looking for. But gave you 2 points however for general interest. You see, I want be sure, that printing barcodes from Adobe on HP printers is natively supported. It was not the case with SapScript and SmartForms. Your advice was basically concerning how to have barcodes in Adobe forms. You see, in SapScript and Smartforms you could not be sure on What-You-Get-Printed because some features like barcodes and certain fonts were device dependent.
    If you personnally have an HP printer (which model?) near to you, could you please make a sample Adobe form having a barcode and print it on that HP printer of yours. Then for your interest you can make the same test from SapScript and SmartForm and you'll notice what I have meant. I'll grant you with maximum points if perform those tests.
    I currently not have Adobe designer installed, so I am not able to verify from the tool itself which barcodes are supported in Adobe. Therefore I was hoping somebody would provide me a list of supported barcode types (like C128 was supported according to those OSS notes you provided). And can you adjust barcode hight and data display (the text that you can see below the barcode)?
    Any SAP Adobe staff member like Markus Meisl could easily answer this question.
    br: Kimmo

  • Looking for sound solution for J2ME.

    Hello everyone,
    I am wondering how to play sound (for example, .wav, .mp3, etc.) on J2ME platform, especially Foundation profile. Can anyone provide any resources?
    Thanks in advance,
    George

    Thanks fakhar,
    Foundation profile is based on CDC and MIDP isbased
    on CLDC, so they have different underlying
    frameworks. This is why I am wondering whetherMMAPI
    can be used on Foundation profile. I want to know
    your ideas on it.That's right .. the following .ppt says "[...]
    Targets the CLDC as its lowest common denominator so
    it can also be used on CDC-based profiles as well."
    - http://www-staff.it.uts.edu.au/~ventsov/lec13.ppt
    It seems MMAPI can be used as an optional package
    with CDC/FP based-devices.
    But point is that even if it is possible, are there
    devices available in the market?Your reply is very helpful. I am meeting with a further issue when running the following simple sample of MMAI,
    public static void main(String[] args) {
         try {
              Player player = Manager.createPlayer"http://localhost/sample.wav");
              player.start();
         } catch (MediaException e) {
              e.printStackTrace();
         } catch (IOException e) {
              e.printStackTrace();
    }java.lang.UnsatisfiedLinkError will be thrown,
    Exception occurs in thread �main� java.lang.UnsatisfiedLinkError: com/sun/mmedia/WaveOut.nOpen(IIIII)I
         at com.sun.mmedia.WaveOut.open(Unknown Source)
         at com.sun.mmedia.WavPlayer.doPrefetch(Unknown Source)
         at com.sun.mmedia.BasicPlayer.prefetch(Unknown Source)
         at com.sun.mmedia.BasicPlayer.start(Unknown Source)I am wondering how to solve this issue?
    Thanks in advance,
    George

  • Better Alarm Sounds For "Informant"?

    The native "Clock" application has a selection of alarm sounds. I find that "Antique Auto Horn" cuts through the background noise enough tb heard.
    But I find Informant's sound tb inadequate and don't see a built-in choice menu.
    Is there some sort of hack/application that will allow assigning different sounds to apps like Informant?
    Or does that functionality already exist within Informant and I'm just missing it?

    not really, you'll have to use a third party application.
    Post relates to: Treo Pro T850U (Unlocked)

  • Sound Solution and the middle click on registration

    Hello world! - well, Arch forum, anyway.
    I've installed Arch successfully - finally - and I'm looking forward to using it. I work with multimedia, and this will be my main focus on "getting things done".
    I have a few items for feed back to the maintainers of the installation page - which in itself was quite help, however I had to do a reinstall after hitting the boot section of the instruction sheet because I was missing a 1 GB partition that wasn't clearly described at the partitioning section. I know it said that this partition could be anywhere within the first TB, which in my case was anywhere on my disk, but just to keep things tidy I wanted to put this at the beginning of the partion table to avoid having to dance around it later with zfs and what not.
    This first time I attempted to install Arch was about a year and a half ago. I had to give it up because no mater how hard I tried - I just couldn't get sound to work on my system.
    This time, I didn't create my users for the daily drive until I had a zfs partition up and running. While I was doing this, I was also testing the system - as root of course - and I was extremely happy with the performance and that sound and video worked straight out of the box. However, when I created my users, I couldn't get sound to work for them. I booted up as root and sound worked again - then I switched to a regular user and sound worked. Rebooting and logging directly into a user account - sound did not work. I'm running an E17 set-up, and the toggle check mark to unmute the speakers/sound card was not available. Only after activating the sound system as root was I able to control sound as user afterwards.
    To solve this I removed "audio" from all of the users groups - now sound can be controlled flawlessly - well as far as the users can tell. This was obviously the source of my problems with my first attempt at installing ArchLinux.
    Also when registering I was asked what was the outcome of:
    date -u +%V$(uname)|sha256sum|sed 's/\W//g'
    I highlighted the answer from the terminal I was running, and - being the UNIX geek I am - middle cliked the answer into the answer field. Unfortuntately, the answer was wrong. After several attempts -double checking my work all the way through - the answer was always wrong. But then I right clicked the long answer and pasted this into the field then the answer was accepted.
    I beg your pardon for mixing a few elements into the post - but I hope this also helps new users to Arch.
    So, now I'm here.
    Pleased to meet you.
    Gustav 4

    With regard to copy-pasting: http://www.jwz.org/doc/x-cut-and-paste.html
    I think middle-click should have worked.

  • IMac G5 no sound - solution

    Solved the problem with following steps:
    Restart
    instantly pressed keys: Apple-Option-O-F (openfirmware Mode)
    type: reset-nvram (return)
    type: reset-all (return)
    iMac boots automatically

    ok, found the problem. in the transfer of data from the imac g4- the one with the speakers that look like the ones that came with the cube, but are not usb- the audio preferences must have been transfered. my guess is that that was the origin for the digital out. my friend did not have the appl.com.soundpref.plist. i emailed it to him, he installed it and all is well!
    thanks for the suggestions. they were very good!
    gladys

Maybe you are looking for