Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping

Excuse me, does any body can help me?
Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping
I need to know if the ACS support the AAA functions but from equal ip segments (ip overlaping) on diferent places.... with diferent client networks.
We are implementing the ACS on a central site (our NOC), so each field engineer will be AAA from diferent sites, same ip networks and diferent places....
We need to implement support activities where our field engineer get access on a cisco device on the client premises, but the point is that we have a field engineer force wich get access on each device on diferent places.
With this scenary we need to decide wich is better: The appliance or the ACS Server with VMware ESX
ACS Server with VMware ESX
CSACS-5.1-VM-K9
CSACS-5-ADV-LIC
CSACS-5-LRG-LIC
CSACS-5-BASE-LIC
CON-CSSPS-5ADVLI
CON-CSSPS-5LRGLC
CON-CSSPS-51VMK
APPLIANCE
CSACS-1120-K9
CAB-AC
CSACS-5-BASE-LIC
CSACS-5.0-SW-K9
CON-OSP-CS1120K9

Just a quick question - have you looked at superwaba
and wabajump? Superwaba is basically Java for pocket
pc and palm, but wabajump allows you to compile to
palm (not pocket pc). You can also use Eclipse for
development in an applet - much quicker than deploying
to device/virtual device. Small memory footprint as
well.
Cheers
Andy StrattonThank you Andy. I'll try it. Have you tried to use Websphere Studio Device Developer ?
I've tried version 5.5 but i found it not too comfortable.
I'd like to know personal experiences of the whole stack of components and tools involved
in the development process. We're trying to design the best environment for it.
Kind Regards
J.L Perez

Similar Messages

HT4864 I am getting a triangle with an exclamation point next to my inbox...it says: There may be a problem with the mail server or network. Verify the settings for account "MobileMe" or try again. The server returned the error: Mail was unable to log in

I can send but cannot recieve email
This is the messege I am gewtting:
There may be a problem with the mail server or network. Verify the settings for account “MobileMe” or try again.
The server returned the error: Mail was unable to log in to the IMAP server “p02-imap.mail.me.com” using “Password” authentication. Verify that your account settings are correct.
The server returned the error: Service temporarily unavailable

Also if I go to system preferences accounts and re-enter the password it fixes the glitch sometimes.

There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"

Good day Guys
First of all I am not an Exchange Expert, and I might be asking a very stupid question, but please bare with me. :)
While I was on leave our Mail server fell over and The company got a Specialist to help out for the time being.
We where\are on Microsoft Exchange 2007 , which Fell over, and the specialist was able to recover as much data as he could.
They then installed Exchange 2013 and tried to migrate everything from 2007 to 2013 and not everything migrated over.
But the problem is, Outlook Anywhere was enable on 2007 and worked a 100% (before the disaster)
With Exchange 2013 I get the following error message when trying to connect With Outlook 2013, using an external connection:
"There is a problem with the proxy server's security certificate. The name on the security certificate is invalid or does not match the name of the target site "Mailserver"
Outlook is unable to connect to the Proxy server. (Error Code 0)"
Has anyone had the Similar when migrating over from 2007 to 2013 or is this an Issue on IIS and nothing to do with Exchange migration?
Your assistance will be greatly appreciated.

Hi,
Firstly, I would suggest we use Exchange 2013 FE as the Outlook Anywhere proxy server.
For the certificate issue, it mostly occurs because the host name that Outlook are trying to access does not match the certificate SAN. Please check with this point. If they do not match, you
can change the host name by referring to the following article:
https://support.microsoft.com/kb/940726/en-us?wa=wsignin1.0
Thanks,
Simon Wu
TechNet Community Support

EAP-TLS or PEAP authentication failed during SSL handshake to the ACS serve

We are running the LWAPP (2006 wlc's and 1242 AP's) and using the ACS 4.0 for authentication. Our users are
experiencing an issue, where they are successfully authenticated the first time, however as the number of them is increasing, they're starting to drop the connections and being prompted to re-authenticate. At this point, they are not being able to authenticate again.
We're using PEAP for the authentication and Win XP SP2 clients as the supplicants. The error message that we are seeing on the ACS for that controller is "EAP-TLS or PEAP authentication failed during SSL handshake to the ACS server"...Not sure if this error msg is relevant since we have other WLC's that are working OK and still generating the same error msg on the ACS...
Thanks..

Here are some configs you can try:
config advanced eap identity-request-timeout 120
config advanced eap identity-request-retries 20
config advanced eap request-timeout 120
config advanced eap request-retries 20
save config

Where does the ACS server get the DNS info for IP pools?

I am trying to change the DNS servers that my VPN users are assigned from the IP pools on the ACS server. Where does the IP pools get the DNS server information. I have changed the DNS Ips on the windows server and rebooted. But the VPN clients are still being assigned the old DNS servers.

ACS ip pools do not push DNS server information
It is either being forwarded from VPN concentrator group setup or
it is being send from ACS user/group setup > Radius(VPN 3000) attributes > [026/3076/005] Primary-DNS.
Hope this helps.
Regards
Rohit

Return The remote server returned an error: (403) Forbidden error for some file types

hi
am using below code to get the byte array
byte[] myDataBuffer = client.DownloadData((new Uri(sourceUrl)));
for source of type .txt/.jpg no problem with accessing.but the file type with .master/.wsp/.cs
it is returning "The remote server returned an error: (403) Forbidden error for some file types" Error.how can i get rid of this.please help me
Thanks in Advance

Hi,
It seems there is something wrong with your code, from your code the account and key are the same, because their appsetting name are the same.
string account = ConfigurationManager.AppSettings["StorageAccountName"];
//string account = CloudConfigurationManager.GetSetting("StorageAccountName");
//string key = CloudConfigurationManager.GetSetting("StorageAccountAccessKey");
string key = ConfigurationManager.AppSettings["StorageAccountName"];
string connectionString = String.Format("DefaultEndpointsProtocol=https;AccountName={0};AccountKey={1}", account, key);
return CloudStorageAccount.Parse(connectionString);
If you use CloudConfigurationManager.GetSetting, please consider set azure project as the startup project, if not, this value will be null, this resulted in solution being started as a web project that didn't run inside the Azure emulator. Since CloudConfigurationManager.GetSetting
tries to get setting by contacting Azure (or Azure emulator in this case), and it is not running, it returns null.
Best Regards,
Jambor
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account "iCloud" failed." Been to Apple - no luck. Ideas?

I have a problem syncing iCal on my Macbook air (10.7.5) and my iPhone 4s (5.1.1) over iCloud. The following server error message comes up "The request (CalDAVAccountRefreshQueueableOperation) for account “iCloud” failed." Been to Apple Store - no luck instore, or with Super genius over the phone when with genius in store, taking data in real time via ethernet!
I had to do a full wipe of my system because of time machine back up issues 2 weeks ago, and the error has only occured at some point since then. I only did a drag and drop of my user account folders/files into an External HDD rather than a copy of my user account (advised by the staff in store at Apple to do this) and when reimported, the Mail folders are all present but each message is in a sub-sub-sub folder that is numerically named. I do not have a mirror image of the hard disk prior to the wipe, only a time machine back up from 2 weeks prior to it being done. I am uncertain if this reinstall has caused the issue.
I am not happy to upgrade the software in my iPhone until I have the calendars working. I have purchased Mountain Lion, but again am concerned about upgrading until the issues are sorted.
I have tried the other solutions on here with no luck. HELP please.
Many Thanks.

Progress Update.
I made a back of what existing phtos and Videos I had on my Iplhone. I used Image capture to do this making an entire back up of photos and videoa that were still intact on the phone.
Image capture is god for this purpose, as it does exactly what you ask it to do without applying any rules or squishing the files back into iphote (which might also be corupted)
Image capture wil do the basic function of retriving the contents of the phone and save them as native files on your hard drive.
Once I did this I erased my iphone, and re intitialised it restoring an older back up from icloud.
As the retore was happneing - I did retreive the missing files that cuased the intial beviour as above, and I could play the videos that were missing in the above scenerio. The wierd ting was however that even though the source files were now back on the device, the thumbnail previews were missing. Where I ahd balck thumb nails for server portions of the resotred content.
I then went to bed as the restore is a long process. When I woke up the library had library had cleaned itself up. Mysteriously the prcess had deleted the files missing the their thumbnails.
This is very perculiar and bad behavior.
I am now repeating the process, and will attempt to download the missing content as it is restored and prior to the phone trying to fix itself.
Here are the lessons learned.
DO NOT rely on Photo Stream to keep back ups and synchornise videos from you IOS device. IT DOES NOT SUPPORT THIS CAPBILITY
DO NOT rely on iCloud Back Up alone - always fd an occassional iTunes back up or more reliably still always take a back up of photos and video files using Image Capture to be doubly sure that you a have backd up any content.
DO THIS NOW - dont wait to loose your phone ofr have your phone repaired by replacement at the apple Store. (I did both :-(

Cannot resize the albums in album view in Itunes 11. For those of us with large libraries (160gb), this is extremely frustrating. I want to make the artwork smaller. This seems to be a serious oversight.

Cannot resize the albums in album view in Itunes 11. For those of us with large libraries (160gb), this is extremely frustrating. I want to make the artwork smaller. This seems to be a serious oversight.

I agree.
It was very useful to reduce everything to small and quickly scan down looking for missing artwork.
Particularly useful when I only connect to the machine with iTunes via screen sharing, so everything can be a bit slower to scroll through at times.
In fact, itunes 11 when used purely as a server for Apple TV etc is a downgrade in usability IMO, as they've got rid of some of the useful views that helped me manage my library remotely.

Main Server cannot ping the 2nd server in another location but the 2nd server can ping the main server

I have 3 servers : Main server, and 2 file servers in another country.
My main server can only ping the 2nd file server.
But both of our 2 file servers from another country can ping the main server.
In short, I cannot remote to the first file server.
The settings on both file servers are the same. And I don't have issues in accessing the 2nd file server using the Main server.
Can somebody have the patience to help me figure out the issue?

Being able to ping the server does not mean that you remotely access it.
If you are trying to RDP a server then you need to check that RDP is enabled on the server and that traffic to port 3389 is not blocked or filtered. You can use PortQryUI for checking.
For testing, you can temporary disable security software running on the servers and try again. Also, check the filtering done on network equipment in between your servers.
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile

While preview the report in the reporting server it will show me the password expired?

HI i am working on BIDS 2008R2,
I have deployed my Report soluction in the reporting server,but while i preview the report in my reportig server ,
it will show me the below error ,pls find the scrrenshoot it show the below error
Tell me one thing here i dnt have permisions to view the reports or what,
but while am using windows credntials alos not able to see the reports,
so can you pls help me out for this problem.its urgent basis

Hi Ychinnari,
Reporting Services provides a special account that is used for unattended report processing and for sending connection requests across the network. The account is used in the following ways:
Send connection requests over the network for reports that use database authentication, or connect to external report data sources that do not require or use authentication.
Retrieve external image files that are used in report. If you want to use an image file and the file cannot be accessed through Anonymous access, you can configure the unattended report processing account and grant the account permission to access the file.
According to the error message, password of unattended execution account has expired. To troubleshoot the problem, please refer to the following steps:
Start the Reporting Services Configuration tool and connect to the report server instance you want to configure.
On the Execution Account page, select Specify an execution account.
Type the account and password, retype the password, and then click Apply.
If credentials are passed in the connection string, you need to modify password of the connection string.
For more information about Configuring the Unattended Execution Account, please refer to the following document:
https://msdn.microsoft.com/en-us/library/ms156302.aspx
If you have any more questions, please feel free to ask.
Thanks,
Wendy Fu
Wendy Fu
TechNet Community Support

I updated my Iphone 3gs to 6.1.3 after that I am having this message "Your iPhone could not be activated because the activation server is temporarily unavailable." "The SIM card inserted in this iPhone does not appear to be supported" plz help me! what s

I updated my Iphone 3gs to 6.1.3, after that m having this message:
"Your iPhone could not be activated because the activation server is temporarily unavailable."
"The SIM card inserted in this iPhone does not appear to be supported"
plz help me! what should i do now?

You had a jailbreak and unlock.
When you updated you cooked it.
Your phone is done.
Time for a new one.

When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https:

Question
When I add a https link to quicklinks, when I click on it, the (:) after https does not go to the address bar and thus the link is not connected. This is happening for all quicklink bookmarks with https: Is there a solution?

Try some basic troubleshooting.
'''Try Firefox Safe Mode''' to see if the problem goes away. [[Troubleshoot Firefox issues using Safe Mode|Firefox Safe Mode]] is a troubleshooting mode that turns off some settings, disables most add-ons (extensions and themes).
If Firefox is open, you can restart in Firefox Safe Mode from the Help menu:
*In Firefox 29.0 and above, click the menu button [[Image:New Fx Menu]], click Help [[Image:Help-29]] and select ''Restart with Add-ons Disabled''.
*In previous Firefox versions, click on the Firefox button at the top left of the Firefox window and click on ''Help'' (or click on ''Help'' in the Menu bar, if you don't have a Firefox button) then click on ''Restart with Add-ons Disabled''.
If Firefox is not running, you can start Firefox in Safe Mode as follows:
* On Windows: Hold the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* On Mac: Hold the '''option''' key while starting Firefox.
* On Linux: Quit Firefox, go to your Terminal and run ''firefox -safe-mode'' <br>(you may need to specify the Firefox installation path e.g. /usr/lib/firefox)
When the Firefox Safe Mode window appears, select "Start in Safe Mode".<br>
[[Image:Safe Mode Fx 15 - Win]]
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]] article to find the cause.
''To exit Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
When you figure out what's causing your issues, please let us know. It might help others with the same problem.

Imported RAW images badly corrupted, looks like red paint splashed all over the sky. Photoshop and Iphoto have no problem with the images from my D800E. Aperture worked fine for me in June with the same camera. The Nikon software shows no problem.

I am having a problem importing my images into Aperture 3 from my Nikon D800E. The images appear as if red paint was splashed across the sky. The Nikon software used to transfer from the camera does not show this problem and Photoshop 6 is fine with the images exported as jpg from the Nikon software. Aperature does not even like the jpg images usable by Photoshop. I am suspecting that Aperture is not correctly using the camera raw file. Also, the histograms are radically different between the corrupted images and the Photoshop (good) versions. Aperture worked just fine for me in June with the same camera. All drivers and software are current as of this posting. Anyone else out there seen this before??

Are you sure you do not have Highlight Hot & Cold Areas turned on? (View->Highlight Hot & Cold Areas)?
The bug in Digital Camera raw only affected Raw images. In your first post you wrote:
Aperature does not even like the jpg images usable by Photoshop
If the JPG's have the same problem then it isn't this bug.
regards

2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

2 errors: "Your iPhone could not be activated because the activation server is temporarily unavailable" and the sim says "searching" while iTunes says there is "No Sim installed" - but of course, there is! Any help please??

Hi Peter,
Thank you for the note - I have seen similar replies on other posting errors and I see how that could make sense. The thing is, my iPhone is not jailbroken - it is from an authorized distributor. However, when I told them about the "no service" problem on the sim, they were unable to assist. Then my phone messaged that an itunes restore was required - so I did that, several times, to the error message now noted on my post. I wonder if there is some other way to over-write this message? Thanks very much.

Can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

can i use The iPod shuffle cable (3rd and 4th generation) comes with a 45 mm USB cable for syncing and charging. with 2nd generation ipod?

thanks

Wich is better the ACS Server with VMware ESX or the Appliance for a multitenant environmet with ip overlaping

Similar Messages

Maybe you are looking for