Wich MacOS is the best for Power Mac G5?

Wich MacOS Can I update to a Power Mac G5? Somebody told me that the last one that I can update is the 10.5.8, maybe I can update it for a newest version but it can give me some troubles, is it true?

Hello,
10.5.8 IS the highest any G5 can go.
Just to be sure we're on the same page...
At the Apple Icon at top left>About this Mac.
Then click on More Info>Hardware and report this upto *but not including the Serial#*...
Hardware Overview:
Machine Name: Power Mac G5 Quad
Machine Model: PowerMac11,2
CPU Type: PowerPC G5 (1.1)
Number Of CPUs: 4
CPU Speed: 2.5 GHz
L2 Cache (per CPU): 1 MB
Memory: 10 GB
Bus Speed: 1.25 GHz
Boot ROM Version: 5.2.7f1

Similar Messages

  • I have a macbook, and i want to replace a processor and convert in macbook pro isthat possible , and wich processor is the best for my computer

    have a macbook, and i want to replace a processor and convert in macbook pro isthat possible , and wich processor is the best for my computer

    If you don't see any messages, not have anti-malware running or the Firewall on, try installing the Mac OS X 10.6.8 Update Combo
    It's ok to do this even though you are already running v10.6.8 (according to your profile).
    Restart your Mac after the combo in installed, try the App Store.
    Also... if you have an app called Little Snitch installed, that can prevent a connection to the App Store.

  • Wich mic is the best for xbox 360

    my mic keeps lagging alot so i need a new one

    I dont think its your mic, I think you just have slow internet or are on wifi
    =(。◕‿‿◕。)=

  • Which software is the best for transferring iPod nano songs to iTunes on a mac

    wich software is the best for transfering songs from an ipod nano to itunes on a mac

    None
    Check out KB Article:  How to use your iPod to move your music to a new computer 

  • 168 Pin RAm for Power Mac

    Does anyone know if MT8LD864AG-6 168 pin DIMM is compatible with the RAM for Power Mac 8500 120MHz and Power MAc 7200 120 MHz?
    Thank you in advance for your advice.
    Robert

    Hi Robert,
    The ZIF processor upgrade I have in my Beige G3 MT (300 mHz originally) is a Sonnet G3/500--I wish it were a G4! I installed it when I still had OS9. It stayed in place when I installed Jaguar and, later, Panther.
    As Grant mentions, I used a third-party helper program called XPostFacto, "XPF" for short. Installing "unsupported" Panther with XPF was far easier than installing the "supported" Jaguar and the computer is now more stable.
    T'was Grant who talked me into trying Panther. Now I can't believe I waited so long! I used an older version of XPF, version 3.1, at Grant's suggestion. V3.1 seems to be the "sweet spot" for installing Panther. Some Beige G3 owners have successfully installed 10.4.x with later version of XPF but more users have reported stability issues than with 10.3.
    If you are interested in learning more about the upgrade paths available to the Beige G3, there is a very active forum area here:
    http://discussions.apple.com/category.jspa?categoryID=110
    Hope this helps!
    A

  • ?Best OS X version for Power Mac Cube G4-I want to reformat and start again in the hope it will work faster.

    Hi. I want to reformat and start again in the hope my G4 PowerMac Cube will work faster. So I'd like to know what the best version of Mac OS X is for the G4. Can anyone advise?  Many thanks.

    Hi, the best for speed is the lowest OSX it'll run & still do what you need.
    10.1.5 would run in 96MB of RAM, 10.2.x took twice as much, 10.3.x twice again, 10.4.x twice again, 10.5.x thrice again & better Video caards.
    And those are minimums, twice that being fairly useful, 4 times that being pretty good.
    I suspect 10.4.11 is going to be your "Sweet Spot", I wouldn't run 10.4 on PPC Macs with less than 1.5 GB of RAM, not on IntelMacs with less than 3-4GB of RAM.
    OSX is very dependent on it's spped & usability by the speed & amount of free space on the HD.
    So we know more about it...
    At the Apple Icon at top left>About this Mac, then click on More Info, then click on Hardware> and report this upto but not including the Serial#...
    Hardware Overview:
    Model Name: eMac
    Model Identifier: PowerMac6,4
    Processor Name: PowerPC G4 (1.2)
    Processor Speed: 1.42 GHz
    Number Of CPUs: 1
    L2 Cache (per CPU): 512 KB
    Memory: 2 GB
    Bus Speed: 167 MHz
    Boot ROM Version: 4.9.2f1

  • Best free antivirus online for Power Mac G5?

    I was just notified that there is a virus on my flash drive (DLACTRLW.EXE virus) and I was told to download AVG from cnet.com for free.  I don't think this works for macs, so I was hoping someone could tell me what might be the best for my Power Mac G5.
    Thanks for your help!

    my advice is simply be careful. Dont open suspicious emails, etc.
    Also , learn how viruses work. For example, all files have a 3-letter extension.  On windows machines, a program capable of running ( and thus of doing harm) has the extension ".exe" So you can spot a potential virus by its extension. note that some viruses some in with a different extension and then change their namesop they will run.
    Unless you are running windows on your mac, a ".exe" program cannto run. It is a windows program. So you are safe.
    I find most anti-virus programs to be nearly as bad as the virus themselves.  I hoep 'clean living" can keep me virus free.
    Grant

  • Which KVM switch is the best for Mac Mini

    Base on individual experience, which KVM switch is the best for Mac Mini

    Hot-Key mode MacMini and IO Gear KVM Switch MiniView Micro USB Plus
    Fusionwolf, can you help me?
    I want to use my TFT monitor (HPvs19 ) with a MacMini and a Casablanca KRON PC. The monitor works good with both computers, when connecting them separately.
    I've bought a KVM switch MiniView Micro USB Plus (IOGear GCS632U) connected it as written in the IOGear Installation Manual. Now I can use the monitor with my MacMini and my Mac keyboard, but I cannot switch to the PC.
    In the IO Gear manual several methods to switch ports are written. But every method starts by invoking HotKey mode.
    The manual reads :
    "To invoke HotKey mode, do the following:
    1. Press and hold down the NumLock key
    2. Press and release the minus- key
    3. Release the NumLock key"
    and
    "When HotKey mode is active, the Caps Lock, and Scroll Lock LEDs flash in succession to indicate that Hotkey mode is in effect."
    I've tried many times to do this pressing/releasing on my Mac keyboard. Within different time/speeds. But with no result... I CANNOT get in the HotKey mode...
    What can I do? Are there other ways to get in HotKey mode with my Mac keyboard (bought with my previous iMac some 4 years ago)? Or are there other ways of switching with the IO Gear KVM Switch?
    Thanks a lot in advance for an answer!
    John

  • I recently bought an imac but then I got photoshop and it didn't meet the specs. So I was wondering wich computer/laptop would be the best for running Photoshop CC and AfterEffecs CC for under 700Dollars

    I recently bought an imac but then I got photoshop and it didn't meet the specs. So I was wondering wich computer/laptop would be the best for running Photoshop CC and After Effecs CC for under 700 Dollars.

    I recently bought an imac but then I got photoshop and it didn't meet the specs. So I was wondering wich computer/laptop would be the best for running Photoshop CC and After Effecs CC for under 700 Dollars.

  • What is the best for me ? ?

    Hello,
    I'll buy a Mac soon and i'm confused as to macbook pro or macbook air ... i'm in college now and work with Photoshop and 3D max .. make some short movie .. So what's the best for me ?

    You should also ask this in the MacBook Pro and MacBook Air forums. This is the forum for the white and black plastic MacBooks that were discontinued in 2010. You should also post this question there to increase your chances of getting an answer.
    https://discussions.apple.com/community/notebooks/macbook_pro
    https://discussions.apple.com/community/notebooks/macbook_air

  • Which SSD is the best for Macbook pro 17''

    I want to upgrade my HDD in my mac (i have the 750Gb 5400rpm from the factory) with a new SSD.
    I ask if someone knows which ssd is best for my mac (17'' early 2011 2.3ghz).
    I also read in many forums that they has problems about write-erase etc. And something about TRIM (i really dont know what it is...)
    I only use my mac for my job ( i am a tv-film director and i use it to edit)
    Will i see any diferents (i work with FinalCut-Premiere-AfterEffect) if i install ssd for what i do or it will be a waste of money?
    Thanks a lot!

    None
    Check out KB Article:  How to use your iPod to move your music to a new computer 

  • External drives... whats the best for video.... ?

    Hi everyone,
    I'm trying to figure out what the best bang for the buck is in regards to external drives, and what works best for video.
    I have considered the LaCie enclosures, I have also considered buying a 500 GB SATA to replace the 200 GB second drive I have inside the G5. The issue than is what enclosure works the best with a MAC and is 1394 and will the firm ware support huge video files, for render or exporting?
    Can anyone give some advice based on what they have learned through past experience.
    Thanks

    I've been using LaCie FW (800 & 400) drives for about three years now with only one problem - One of the first drives I bought (I think it was a 120 GB) fried itself a few months ago. I currently have 80GB, 120 GB, 400GB and 500 GB drives, all working fine, never have dropped frames. The LaCie drives are pretty tough too, as I've sent most of them back and forth across the country at least a few times with no problems.
    However, be careful if you update the firmware for them - make sure the drive is clean as the firmware update can cause corruption of data on the drive (I found that out the hard way!). Also keep in mind that they do put off a fair amount of heat (especially the big ones) so I wouldn't consider stacking them on top of each other horizontally.

  • Batteries for Power Mac G3 Beige Minitower

    Where can I get batteries for Power Mac G3 Beige Minitower? I think they're Lithium batteries 3.6V 200W 922-4542.

    m i g,
    Here is a source for $4.99:
    http://eshop.macsales.com/item/Newer%20Technology/BAA36VPRAM/
    Jim
    Note to others: (direct quote from above link)
    This battery is an exact replacement for the below listed models.
    Macintosh II series computers
    Macintosh SE FDHD
    Macintosh Classic (4-chip and 2-chip)
    Macintosh SE/30, IIx, IIcx, IIci, IIfx, IIsi series computers
    Macintosh IIvi, IIvx, Performa 600 series computers
    Macintosh LC, LC II, LC III, Performa 400 series computers
    Macintosh Quadra 605, LC 475, Performa 475, 477 series computers
    Macintosh LC 520, LC 550, Performa 550 series computers
    Macintosh Classic II, Color Classic, Performa 200 series computers
    Macintosh Centris 610, 650, 660AV series computers
    Macintosh Quadra 610, 660AV, 650, 700, 800, 840AV, 900, 950 series computers
    Power Macintosh 6100, 7100, 8100 series computers, and Performa 6100 series computers
    Power Macintosh 7200, 7300, 7500, 7600, 8500, 8600, 9500, and 9600 series computers.
    Power Macintosh G3 - all models, entire series
    iMac - all models, entire series
    Power Mac G4 - all models, entire series
    Power Mac G5 - all models, entire series

  • Which hard drive is the best for iMac (late 2012)?

    Wich hard drive is the best for the new iMac. I thought one of LaCie, do you guys know better hard drives. Please comment. It would be nice if it has Thunderbolt or/and USB 3.0. Not too expenive.

    aigoosung:
    Here is a list of available drives for your computer at OWC.
    cornelius

  • Which card do you think is the best for my system .... (new in this area)

    Hi Friends,
    i  am learning the SC5 Premiere and i want to buy a card for my system: (my old one, 4870, not support Cuda)
    Intel Core 2 Quad Q9400
    DFI LP UT X48-T3RS MainBoard
    ATI Radeon 4870 HD (i want to replace it, no Cuda)
    2 Disk 1TB Sata
    8GB DDR3 Kingston
    Enermax 650W Power Supply.
    i have a Full HD Video Camera - Panasonic TM700
    i have a faw cards that i cab buy for around 300$ ~
    1. GTX 285 with 1GB
    2. GTX 295 with 1.7GB
    3. Quadro FX3700 with 512MB
    Can someone help me to decide which one will be the best for my system?
    i know that i don't have the best cpu or ram or disk for this CS5 Permiere but please try to help me with this configuration.
    Many Thanks.
    Kastro.

    if i have to chose from 3 cards
    1. GTX 285 (250$~)
    2. GTX 295 (375$~)
    3. GTX 470 (3504~)
    which one is the best for me?
    Thanks again.

Maybe you are looking for

  • Workitem - Vanishes and capturing sy-ucomm

    Hello, I have new to workflow area and have couple of questions. I have browsed through the documentation and could not get clear answers. 1.     I am sending a workitem to user, User is supposed to open it and approve/reject. If for user some reason

  • Problem in thread creation

    Hello Frnds, i am learning j2me..i am facing some problem in simple thread initilization.. the code is import javax.microedition.midlet.*; import javax.microedition.lcdui.*; import java.io.*; import javax.microedition.io.*; class Process implements R

  • Best solution for multiple host tradingpartners

    Hi guru's, I have the following situation: Customer currently has one department sending EDIFACT (over Generic Exchange) messages to trading partners. Customer now wants to add a new domain to the current installation, for a second department. Much l

  • Redirecting a servlet response to a file

    Is there a way to redirect the response objects output buffer to a file instead of to the client (browser)? I am using the jsp to process a set of jsp templates (using the RequestDispatcher's include method) and I would like to send the resulting htm

  • Error Installing Oracle 9i on Linux. Please help.

    Hi folks, While installing Oracle 9i on RedHat Linux 8.0, I am unable to configure and start and listener process. The error message it throws back is that "unable to configure as the information provided is being used by another software. Unless tha