Wich table is used by Tcode SCAL ?
Hi,
I want to open a table in my PRD system for change calendar.
The PRD client is not modifiable so i have to open the table in PRD for change the calendar.
I know that i have to use se54 and note 356483 explain that.
But i don't Know wich tables do i have to open in PRD system for change de calendar.
Does anyone know's this tables ?
Thanks a lot.
Hi,
No it is a individual txn object type "T" and hence the transport link cannot be broken as described in Sap Note 356483.
You can also check it yourselfvia SAP IMG.
Goto txn SPRO.
Then navigate to SAP Netweaver -> General Settings -> maintain Calendar (this is what SCAL does).
Then as decribed in the note: Edit -> Display IMG Activity.
And this shows you what type of object it is.
Hope this helps.
Reg, Dibya
Similar Messages
-
Tcode : MSC3 in wich table Batch Classified indicator stores
Hi experts,
Tcode : MSC3 in wich table Batch Classified and Batch Not Classified indicator stores?
Please suggest me wherein which these details stores.Thanks for u'r reply.
But correct Function module is CTMS_OBJECT_HAS_STANDARDCLASS
WA_OBJECT (Material + Batch)
WA_OBJECT = ITAB_SALES-MATNR.
WA_OBJECT+18(10) = ITAB_SALES-CHARG.
OBJECT = WA_OBJECT
TABLE = 'MCH1'
CLASSTYPE = '023'
Pass the above value to FM: CTMS_OBJECT_HAS_STANDARDCLASS
if sy-subrc eq 0.
classified
else.
not classified.
endif. -
Is there any Table to display all Tcodes used in BW
Hi
Is there any Table available where all Tcode can be seen.
Thanks,
Jaswanthahi,
these are the tcodes in bw..
RS00 Start menu
RS12 Overview of master data locks
RSA0 Content Settings Maintenance
RSA1 BW Administrator Workbench
RSA10 Realtime Test Interface Srce System
RSA11 Calling up AWB with the IC tree
RSA12 Calling up AWB with the IS tree
RSA13 Calling up AWB with the LG tree
RSA14 Calling up AWB with the IO tree
RSA15 Calling up AWB with the ODS tree
RSA1OLD BW Administrator Workbench (old)
RSA2 OLTP Metadata Repository
RSA3 Extractor Checker
RSA5 Install Business Content
RSA6 Maintain DataSources
RSA7 BW Delta Queue Monitor
RSA8 DataSource Repository
RSA9 Transfer Application Components
RSADMIN RSADMIN maintenance
RSADRTC70TOADR11 Conversion of table TC70 in ADR11
RSANWB Model the Analysis Process
RSANWB_CRM_ATTR Fill CRM Attributes
RSANWB_EXEC Execute Analysis Process
RSANWB_IMP Calculation of Importance
RSANWB_START_ALL Model the Analysis Process
RSANWB_SURVEY Analysis Process: Create Target Grp
RSAN_CLTV CLTV Modeling
RSAN_CLTV1 CLTV
RSAN_RESP Response Prediction Models
RSAN_RFM RFM Modeling
RSAN_SALES_PL_CALL Execute Sales Planning
RSAN_SURV_SHOW BW Survey
RSAN_SURV_TG BW Survey: Target Group Management
RSAN_VERI Analysis Process: Test Monitor
RSAN_WB_TST IMC Wrapper Transaction for Testing
RSARCH_ADMIN BW Archive Administration
RSARFCEX Variant for RSARFCEX
RSASSIBTCH Schedule Assistant in Background
RSATTR Attribute/Hierarchy Realignment Run
RSAWB New AWB
RSAWBSETTINGSDEL Delete user settings of the AWB
RSB0 Maintain OLAP authorization object
RSB1 Display authorization object
RSB2 Data Marts Generation Center
RSBBS Maintaining BW Sender-Receiver
RSBBS_WEB Transaction for the RRI in the Web
RSBCTMA_AC xCBL Action Codes
RSBCTMA_DT Mapping of Ext./Int. Document Type
RSBEB Business Explorer Browser
RSBMO2 Open Hub Monitor
RSBO Open Hub Maintenance
RSBOH1 Open Hub Maintenance
RSBOH2 Open Hub Maintenance
RSBOH3 Open Hub Maintenance
RSBO_EXTRACT Auth Check Open Hub Extraction
RSBROWSER BW Browser
RSBWREMOTE Create Warehouse User
RSCATTAWB CATT Admin. Workbench
RSCDS Summarization routine
RSCONCHA Channel conversion
RSCONFAV Favorites Conversion
RSCRMDEBUG Set Debug Options
RSCRMISQ Regis. of Infosets for Target Groups
RSCRMMDX Edit MDX
RSCRMMON Monitor Query Extracts
RSCRMSCEN Regist. Closed-Loop Scenarios
RSCRM_BAPI Test Program for RSCRM Interface
RSCRM_REPORT BW Queries with ODBO (to 2nd 0B)
RSCRT BW Monitor (Near)-Real-Time Loading
RSCR_MAINT_PUBLISH Maint. of Publishing Variables CR/CE
RSCR_MAINT_URL Maint. of URL Variables for CR/CE
RSCUSTA Maintain BW Settings
RSCUSTA2 ODS Settings
RSCUSTV1 BW Customizing - View 1
RSCUSTV10 BW Customizing - View 10
RSCUSTV11 BW Customizing - View 11
RSCUSTV12 Microsoft Analysis Services
RSCUSTV13 RRI Settings for Web Reporting
RSCUSTV14 OLAP: Cache Parameters
RSCUSTV15 BW Customizing - View 11
RSCUSTV16 BW Reporting
RSCUSTV17 Settings: Currency Translation
RSCUSTV18 DB Connect Settings
RSCUSTV19 InfoSet Settings
RSCUSTV2 BW Customizing - View 2
RSCUSTV3 BW Customizing - View 3
RSCUSTV4 BW Customizing - View 4
RSCUSTV5 BW Customizing - View 5
RSCUSTV6 BW Customizing - View 6
RSCUSTV7 BW Customizing - View 7
RSCUSTV8 BW Customizing - View 8
RSCUSTV9 BW Customizing - View 9
RSD1 Characteristic maintenance
RSD2 Maintenance of key figures
RSD3 Maintenance of units
RSD4 Maintenance of time characteristics
RSD5 Internal: Maint. of Techn. Chars
RSDBC DB connect
RSDB_ADD_ID_2_CRM Create External ID for CRM-GP
RSDB_INIT Initial Download of D&B Data
RSDCUBE Start: InfoCube editing
RSDCUBED Start: InfoCube editing
RSDCUBEM Start: InfoCube editing
RSDDV Maintaining Aggregates
RSDIOBC Start: InfoObject catalog editing
RSDIOBCD Start: InfoObject catalog editing
RSDIOBCM Start: InfoObject catalog editing
RSDL DB Connect - Test Program
RSDMD Master Data Maintenance w.Prev. Sel.
RSDMD_TEST Master Data Test
RSDMPRO Initial Screen: MultiProvider Proc.
RSDMPROD Initial Screen: MultiProvider Proc.
RSDMPROM Initial Screen: MultiProvider Proc.
RSDMWB Data Mining Workbench
RSDODS Initial Screen: ODS Object Processng
RSDODSD Initial Screen: ODS Proces. (Deliv.)
RSDPMDDBSETUP Creates a MOLAP Database in MSAS
RSDPMOLAPDS MOLAP DataSource creation
RSDPRFCDSETUP Create MOLAP Rfc Tests
RSDSD DataSource Documentation
RSDU_SHOWTEMPINCTAB RSDU_SHOWTEMPINCTAB
RSDV Validity Slice Maintenance
RSD_ACAT Maintain InfoObject catalog
RSEDIT Old editor
RSEIDOCM Variant for RSEIDOCM
RSENQ Display of Lock Log
RSEOUT00 Variant for RSEOUT00
RSFH Test Transaction Data Extractors
RSFLAT Flat MDX
RSFREQUPL Frequent upload from source systems
RSGWLST Accessible Gateways
RSH1 Edit hierarchy initial screen
RSH3 Simulate hierarchies
RSHIER Hierarchy maintenance w/o AdmWB
RSHIERINT Hierarchy maintenance from AdmWB
RSHIERSIM Simulate hierarchies
RSICUBE Maintain/Change InfoCubes (Internal)
RSIMG BW IMG
RSIMPCUR Load Exchange Rates from File
RSINPUT Manual Data Entry
RSIR_DELTATRACK KPro Delta Tracking
RSISET Maintain InfoSets
RSKC Maintaining the Permittd Extra Chars
RSLDAPSYNC_USER LDAP Synchronization of Users
RSLGMP Maintain RSLOGSYSMAP
RSMD Extractor Checker
RSMDCNVEXIT Conversn to Consistent Intern. Vals
RSMDEXITON Activate Conversion Routine
RSMO Data Load Monitor Start
RSMON BW Administrator Workbench
RSMONCOLOR Traffic light color in the Monitor
RSMONITOR_DB D&B Integration
RSMONMAIL Mail Addresses for Monitor Assistant
RSNPGTEST Test Network Plan Control
RSNPGTEST2 Test Network Plan Control
RSNSPACE BW Namespace Maintenance
RSO2 Oltp Metadata Repository
RSO3 Set Up Deltas for Master Data
RSOCONTENT Administration of a Content System
RSOCOPY Copy from TLOGO Objects
RSODADMIN Administration BW Document Managemt.
RSOR BW Metadata Repository
RSORBCT BI Business Content Transfer
RSORMDR BW Metadata Repository
RSPC Process Chain Maintenance
RSPC1 Process Chain Display
RSPCM Monitor daily process chains
RSPFPAR Display profile parameter
RSQ02 Maintain InfoSets
RSQ10 SAP Query: Role Administration
RSQ11 InfoSet Query: Web reporting
RSRAJ Starts a Reporting Agent Job
RSRAM Reporting Agent Monitor
RSRAPS Manages Page Store
RSRCACHE OLAP: Cache Monitor
RSRCATTTRACE Catt transaction for trace tool
RSREP BW Administrator Workbench
RSRFCCHK RFC destinations with logon data
RSRHIERARCHYVIRT Maintain Virtual Time Hierarchies
RSRQ Data Load Monitor for a Request
RSRR_WEB Report-Report Interface in Web
RSRT Start of the report monitor
RSRT1 Start of the Report Monitor
RSRT2 Start of the Report Monitor
RSRTRACE Set trace configuration
RSRTRACETEST Trace tool configuration
RSRV Analysis and Repair of BW Objects
RSRVALT Analysis of the BW objects
RSR_TRACE Trace Monitor
RSR_WEB_VARIABLES Variable Entry in Web
RSSCD100_PFCG Change Docs for Role Administration
RSSCD100_PFCG_USER for Role Assignment
RSSCM_APPL Application settings SCM4.0 and BW
RSSD Access for scheduler
RSSE Selection start InfoCube
RSSGPCLA Maintain program class
RSSG_BROWSER Simple Data Browser
RSSM Authorizations for Reporting
RSSMQ Start Query with User
RSSMTRACE Reporting Log Authorization
RSSTARTMON Starting the monitor in parall.proc.
RSSU53 Display authorization check BW
RST22 Old Short-Dump Overview
RSTB Choose Object Name
RSTBHIST Table history
RSTG_BUPA Target Group Sel. Business Partners
RSTG_CUST Target Group Selection Customers
RSTG_DB Target Group Selection D&B
RSTG_DB_WEB Target Group Selection D&B
RSTPRFC Create Destination for After-Import
RSU0 Update rules overview
RSU1 Create update rules
RSU1I Create update rules
RSU1O Create Update Rules
RSU2 Change update rules
RSU2I Change update rules
RSU2O Change Update Rules
RSU3 Display update rules
RSU3I Display update rules
RSU3O Display Update Rules
RSU6 Delete update rules
RSU6I Delete update rules
RSU6O Delete update rules
RSU7 Data Extraction: Maintain Parameters
RSUSR003 Check standard user passwords
RSUSR200 List of Users per Login Date
RSWELOGD Delete Event Trace
RSWEWWDHMSHOW Display Background Job SWWERRE
RSWEWWDHSHOW Display Work Item Deadline Monitorng
RSWWCLEAR Execute Work Item Clearing Work
RSWWCOND Execute Work Item Rule Monitoring
RSWWDHEX ExecuteWorkItemDeadlineMonitoring
RSWWERRE Start RSWWERRE
RSZC Copying Queries between InfoCubes
RSZDELETE Deletion of query objects
RSZT Get Test Component
RSZTESTFB Shortcut Function Test Environment
RSZV Call up of view V_RSZGLOBV
RSZVERSION Set frontend version
RS_AWB_REMOTE Remote AWB Staging
RS_BCT_BWBEOTYP Maintain BW Backend Object Types
RS_DS_CHECK Check consistency request
RS_ISTD_REMOTE Maintain InfoSource
RS_LOGSYS_CHECK Source System Tool
RS_PERS_ACTIVATE Activation of BEx Personalization
RS_PERS_BOD_ACTIVATE Activate BEx Open Pers.
RS_PERS_BOD_DEACTIVA Deactivate Pers. for BEx Open
RS_PERS_VAR_ACTIVATE Activate Variable Pers.
RS_PERS_VAR_DEACTIVA Deactivate Pers. for Variables
RS_PERS_WTE_ACTIVATE Activate Web Template Pers.
RS_PERS_WTE_DEACTIVA Deactivate Pers. for Web Template
SP01 Spool -
Table to find previous tcode ?
Hi.
can any one plz tell me
table to find previous tcode?
how can we find previous tcode which we entered in sap?
Thanks
praveenHi Praveen,
Your last 15 transaction codes used in the SAPGui are stored in the registry key;
[HKEY_CURRENT_USER\Software\SAP\SAPGUI Front\SAP Frontend Server\Code]
Rgds, Derrick -
Clearity reagarding table which used in report..
Hi Everyone,
I have one querry regarding one report of material available in stock.My question is that to check material available in stock for only a prticular month which table i have to used, and my selection screen is only storage location and month.
Thanks & regard.Hello Everyone,
I generated one program to check the material available in stock but the data come out from my program is not matched with the TCODE -MCBA.In mcba s039 table is used but i used these MAKT,S031,MBEW,MARA,T001L because i didn't get data if i used S039 table. I am sending my program please check it and do need full correction.
Thanks&Regard.
<Garbled code removed by moderator. Post only relevant portion of source code using code tags>
Edited by: saketabap on Nov 9, 2011 8:11 AM
Edited by: Vinod Kumar on Nov 9, 2011 1:19 PM -
In wich table are stored the last purchase price of items?
Hi all,
My question is in wich table are stored the last purchase price of items and what is the best way to import items price directly to the last purchase price list.
In ITM1 appears the prices of the list prices but no the last purchase price list.
Thank you all again.
Regards.Hi
The last purchase price are not stored anywhere as well as the last evaluated price.
However if you want to add or update this price you can use DTW in order to update this particular pricelist.
Hope it helps
Regards
George -
Need to know the program names to which the table is used
Hi,
I am using a table <table1>.
For Example : MARA table. I need to know in what are all the program's the MARA table is used .
Please let me know in which tcode can I know the details.
Thanks,
Karthikhi ,
use program
RS_ABAP_SOURCE_SCAN
passs 'MARA' IN search field
and program name field '*'
will give all program .
regards
Deepak. -
What r the diff. error that can be solved using RSRV tcode?
Hi ,
what r the diff. error that can be solved using RSRV tcode?
I want to know all the errors that can be solved using RSRV t code
if any body is having good document regarding RSRV please send it to me at
<u><b>[email protected]</b></u>
Thanx in advance,
ravi.Hi,
Refer the below links for more details about RSRV TCODE.
/community [original link is broken]
http://help.sap.com/saphelp_nw04/helpdata/en/92/1d733b73a8f706e10000000a11402f/frameset.htm
it's for bw objects consistency analysis and repair.
from transaction code RSRV doc itself :
Transaction RSRV: BW Data and Metadata Test and Repair Environment.
Transaction RSRV checks the consistency of data stored in BW. It mostly examines the foreign key relationships between individual tables in the enhanced star schema of the BW system.
The transaction interface was re-designed for SAP Portals release 3.0A. A brief guide about how to use the transaction follows.
Starting the Transaction
You can reach the test and repair environment
By entering the transaction code RSRV
From InfoObject maintenance (Transaction RSD1)
By clicking on the "Analyze" button in the intial screen.
After selecting a characteristic in the maintenance screen via the "Processing -> Analyze InfoObject" menu option.
The Initial Screen
When using the test and repair environment for the first time, the message "Values were not found for all setting parameters" draws your attention to the fact that there aren't any saved settings for your user.
After confirming the dialog box, you reach the initial screen of the transaction. This is divided into two parts:
1. On the left-hand side, you can see a tree structure with the pool of available tests.
2. The right-hand side is empty at first. The tests you have selected will be put here. A selection of tests is called a Test Package here.
Combined and Elementary Tests
An Elementary Test is a test that cannot be divided into smaller tests and that can therefore only be executed as a whole.
In this regard, a Combined Test determines which elementary tests are to be executed after entering the parameters. You can remove individual elementary tests from the test package before carrying out the actual test run, in order to reduce run time, for example.
Combining a Test Package and Executing it.
Firstly select one or more tests with drag&drop or by double-clicking. Each selected test appears as a closed folder in the view of your test package. (An exception is elementary tests without parameters: These do not appear as a folder). You can also drag a whole folder of tests from the test pool across to the right-hand screen area; all tests that are located in the hierarchical structure under this folder are then added to the test package. You can also display a short description of the test, if required. Do this right-clicking on a test and choosing "Description" from the context menu.
Afterwards, you must supply the tests with parameters. Tests without parameters must not be given parameters. You are given notification of this when selecting them. You can enter parameters by double-clicking on a test (or a test package) or by expanding the folder of the test.
A dialog box appears in which you must enter the required parameters. Input help is often available. After entering the parameters, a folder with the name "Parameter" is added under the test. This contains the parameter values. The test name can change in some circumstances, enabling you to see at first sight for which parameter values the test is to be executed. It is possible to select the same test several times and give it different parameters, which may even be preferable in some situations. When you have supplied the combined test with parameters, the folder with the name "Elementary Tests" is added under this one. It contains the elementary tests, from which the combined test is built. You can delete individual elementary tests in the test pool using drag & drop.
After supplying all tests with parameters, you can start the test run by clicking on the "Execution" button. After execution, the test icons change from a gray rhombus to a red, yellow or green one, depending on whether the test had errors, warnings or was error-free.
Test Results
The test results are written to the application log. Depending on the settings, the system jumps automatically to this display, or you can reach it by clicking on the "Display" button. The results are saved in the database, and can therefore be compared later with additional test runs.
In the left-hand side of the window, you can see an overview of the most recent test runs. Double-clicking on a folder displays all messages under these nodes as a flat (non-hierarchical) list in the right-hand screen area. Long texts or detail data may be available for individual messages, which can be displayed with a mouse click.
Repairs
Some tests can repair inconsistencies and errors. Automatic correction is generally not possible: If entries are missing from the SID table for a characteristic, in which case the lost SIDs are still being used in a dimension table (and the corresponding dimension keys are still being used in the fact table) of an InfoCube, you can only remove the inconsistency by reloading the transaction data of the InfoCube. Also note that you must make repairs in the correct sequence. You must always read the documentation for the test and have a good idea about how the error occured, before making the repairs.
After executing the test run, go from the application log back to the initial screen to make these repairs. Click on the "Fix Errors" button to start an error run. Since the dataset could have changed between the test and the repair run, the required tests are executed again before the actual repair. The results can be found in the application log once again.
Test Packages
The test package is deleted if you do not save the test package in the display before leaving the test environment. Choose "Test Packages -> Save Test Package" in the option menu. You can do the following via options in the "Test Package" menu:
Load packages
Load for processing - the package is then locked against changes by others.
Delete and
Schedule execution at a later date or at regular intervals in background processing
Settings
In the "Settings" menu option, you can make settings (adjust the size of the screen areas, for example) and save them. The settings are automatically read when starting the test environment. Support packages are being delivered with additional settings options since the test environment is under development at the moment. A message notifies the user at the start if there aren't any values for the setting options.
Jobs Menu Option
You can access the job overview via the Jobs -> Job Overview menu. Use this when you want to check the status of a test package you have scheduled.
Application Log Menu Option
You can display old logs from previous test runs in the dialog box, as well as scheduled ones. The option of deleting test logs can also be found here.
New Selection Button
The currently selected test package is deleted when you press this button.
Filter Button
After a test run, click on this button to remove all elementary tests without errors or warnings from the test package.
Executing Test Packages in Process Chains
You can add a process chain to the ABAP Programm RSRV_JOB_RUNNER in the process chain maintenance transaction, RSPC. To do this, use drag & drop to select the process type "ABAP Program" under "General Services" in the process type view. When maintaining process variants you will be asked for the program name and a program variant. Enter RSRV_JOB_RUNNER for the program name. Choose a program variant name and click on "Change". In the next screen you are able to either change or display an already existing variant, or create a new variant. When creating a new variant you will be asked for the following: Package name (an imput help on this is available), the detail level for the log to which the RSRV log in the process chain log is to be integrated, and a message type severity at which process chain processing should be terminated.
The RSRV process log in the process chain is built as follows:
First is a summary specifying whether errors, warnings, or no errors occurred for each elementary test.
A log view of the RSRV test package at the specified detail level follows.
Example: If you choose the value '3' for the detail level, only messages up to and including detail level 3 will be included in the log processes for the process chain. Messages occuring at a lower layer of the test package test are not displayed in this log. Please note that, unlike the application log, the process log does not propagate errors from deep detail levels to low detail levels. For example, if a single detail level 4 error occurs the summary will show that the relevant test delivered an error. However, this error will not be listed in the second part of the log.
A complete log is always written independantly of the RSRV process log in the process chain. You can view this in the menu option "Application Log->Display Log->From Batch".
Please note that there is currently no transport object for test packages and that consequently these cannot be transported. Process chains that execute RSRV test packages must therefore be manually postprocessed after a transport to a different system: The relevant test packages must be created.
Hope This Helps,
This is already there in SDN.
Regards,
rik -
Table For Role relevant TCodes & its Description
Hi,
There is any Table to get the Details of TCodes available in particular Role with its description.
If table is not there,There is any simple method to get TCode details with role.
Pls help me.Thanks in Advance.
Regards
KarthikaHi Karthika,
Use table AGR_PROF to get profiles for the requried roles.
and run the table USTSTCAP, from this table you can get Tcodes for the profiles...
hope this information can help you.
thanks,
kishore -
Update was terminated when trying to issue print output using VL02N tcode
Hi friends,
I am getting follwing error when trying to issue print output using VL02N tcode:
Error: Update was terminated.
When seen in SM13 i saw following info for function module RV_MESSAGE_UPDATE,which was showing error:
Error Info: MC 601: Object requested is currently locked by user RAMU.
When seen in SM12,i don't find any lock by above user RAMU(which is my user id itself).
I request please give me some inputs on how to avoid this error.
Thanks & Regards
SeshagiriHi Nam,
This probelm is becuase you are trying to enter a record for which primary key already exists in the table.
The insertion you are doing with a set of values which already exist and sap is getting this error that the "Duplicate record during insertion". try to check your insertion values and through se16 check if they already exist in the table mkpf.
To rectify the data or else change the table and add one more unique to the primary key.
Abhishek Purwar
http://abhishek.purwar.googlepages.com -
Hi Experts,
My reqs are
1. "Substitution user exit will enable to assign the right profit center based on the customer group and sales group in the sales order."
2. Create a Z table to store sales company code and delivering plant company code and replace the sales company code with delivering plant company code.
How can i achieve my reqs., i know i need to use OBBH Tcode and need to implemnt one user exit. bt how to attach that exit point to my substitution and i could not understand the documents flow here how can we change sales order dtls from here.
<removed_by_moderator> .....please do help me.
Tq Phalani M
Edited by: Phalani Kanth Gupta on Aug 26, 2008 5:51 PM
Edited by: Julius Bussche on Aug 26, 2008 3:55 PMHi Dave,
Can this change result is some kind of problem in some SAP standard code somewhere? Any idea?
Please let me know. I will surely reward points. I have done the changes and it seems to work.
Regards,
Binay Agarwal -
Don't know wich function to use in the mapping editor. The situation (just the example):
table1:
year
week nr record input table 1
Table 2:
year
week nr record input table 2
week nr
The dimension must look like this :
year
week nr record input table 1
week nr record input table 2
week nr
year < week nr record input table 1 < week nr record input table 2 < week nr
anyone an idea?
Message was edited by:
user537568I didn't quite know what you mean, but how's this?
public class MySinglePixelWindow extends JWindow {
public MySinglePixelWindow() {
super();
setSize(1,1);
setLocation(0,0);
public void paint(Graphics g) {
super.paint(g);
g.fillRect(0,0,1,1);
}Transparent Window:
public class MyTransparentWindow extends JWindow {
java.awt.Robot robot;
BufferedImage screen;
public MyTransparentWindow() {
super();
try {
robot = new Robot();
} catch(Exception e) {}
public void show() {
image = robot.createScreenCapture(getBounds());
super.show();
public void paint(Graphics g) {
super.paint(g);
Graphics2D g2 = (Graphics2D)g;
g.setComposite(AlphaComposite.newInstance(AlphaComposite.SRC_OVER,0.8));
g.drawImage(image,0,0,this);
}Puh!
You can't move this window though...
Nille -
what is the use of tcode file????
what is platform independent file name????Platform Independent File path: The actual (Physical) file name/path is always dependent on hardware and OS of the system. Now In this transaction define a Logical name of a file and map it to your specific system specific actual path.
Now in your coding you can use the logical name. When you use the same come in a different system you need not change the logical name to everywhere you have coded. The Logical name will be same, only in FILE transaction you will change the mapping of Logical File name to actual file path.
Check the following Link :
http://help.sap.com/saphelp_erp2005/helpdata/EN/8d/3e4edc462a11d189000000e8323d3a/frameset.htm
Example:
Suppose in your application server you created a file and give a logical name as AIRS_PATH. But when you want to access the file you need to know the actual physical path to it. That path may be c:\temp\<FILENAME>. Now in FILE transaction you mapped AIRS_PATH to c:\temp\<FILENAME>.
So whenever you try to access AIRS_PATH, the system know that you want to access the c:\temp\<FILENAME>.
Now may be you want to run your code in a different system and different hardwre. And the file is stored there in c:\temp\temp1\<FILENAME> path. So then in that system you need to map AIRS_PATH with c:\temp\temp1\<FILENAME.
Now while coding you are not actually familiar or bother the actual file path. You will do your coding based on AIRS_PATH. And that is same in all the system only the mapping need to change. Thus you can achieve the system independence. -
Retrieving values from table control using DYNP_VALUES_READ
Hi all,
I am trying to retrieve the values from the table control using the FM DYNP_VALUES_READ. I have a situation where user enter values in table control in T.code FB60 in Withholding tab for validation purpose. There i'll have to check based on some entries maintained in SET.
I am unable to get the values when i scroll to the next page in the table control. FM raising an exception invalid_dynprofield.
Expecting reply...You have to populate the dynpfields internal table before calling the function,
data: repid like sy-repid.
dynpfields-fieldname = 'PNAME'.
append dynpfields.
repid = sy-repid.
call function 'DYNP_VALUES_READ'
exporting
dyname = repid
dynumb = sy-dynnr
tables
dynpfields = dynpfields
exceptions
others.
read table dynpfields index 1.
pname = dynpfields-fieldvalue.
Now you will have the field value in pname
Hope this helps
Vinodh Balakrishnan -
How to implement line selectability for a table control using table Wizard?
Hello SDN Community,
I have created a table control using the Table Wizard. I found my exact question in this forum, but unfortunately it had not been andsered. While I cannot paste a screen-print into this plane-text area, here are the steps I followed...
1) SE51
2) Create new screen 0100
3) Click Layout button
4) Clidk Table Control (with Wizard) and draw box on canvas.
5) Step is "Start" - click Continue
6) Step is "Name of Table Control" - provided name
7) Step is "Table Name" - provided name of dictionary table (AUFK)
8) Step is "Definition of Columns" - selected order numver and order text
9) Step is "Table Control Attributes" - Line Selectability is in display mode - cannot set it.
I would like to have a selectability column for my table. Would appreciate any insight into how to do this.
Thank you,
Dean Atteberry.This is a puzzling...
For the table control wizard, in the Table Control Attributes step, I was able to get line selectability to open up by declaring a char01 data element at the beginning of my type.
The puzzling is in regards to the "Selection col. fld" entry field.
If I leave it blank and try to go to the next step, I get message "Enter the name of the selection column if you are using a program table"
So it looked like it wanted to know the name of my selection column. So I type in "CHAR1". and got the message "The field "CHAR1" for the selection column is already contained in the table."
Hmmmmm.... don't understand............
Dean Atteberry.
Maybe you are looking for
-
I am not very tech savvy but work from home and have used Macs for about 18 years, so know the basics. Have had iBook G4 for almost 5 years, it came with Panther Discs and later added Snow Leopard. Never had even the slightest issue until about 2 mon
-
Low frequency Voltage measurement
Hi, I am using PCI 6025E to control load bank and to measure voltage, current and frequency of a generator. While current and frequency measurement is not a problem, voltage measurement is toublesome. Since on test bench already there are few PCI bo
-
Can't delete sparsebundle and can't reformat TC
i am backing up my MBP to a Time Capsule (via WiFi) connected to my Mac Pro and i want to reformat the drive and start over. basically i have one sparsebundle from the mac pro on it and one sparsebundle from the MBP and i cannot for the life of me fi
-
Red traffic light occuring while updating RG1 sales materials documents
Dear Experts , I am getting red traffic lights while updating RG1 . What are the possible reasons for this indication??
-
Where can I see the Force-Move-out field?
Hi , Can anyone tell me in which table and field the Forced Move-Out. I know I can find the move-out at EVER-AUSZDAT. But I want to know the table and field for forced moved and dunning move-out. Thanks Dan