Wide Screen .DV files show as 4:3 in iDVD 6.0.3

If I save a project as full quality .dv quicktime from iMovie it plays it in wide format using QT player, but if I drag it to a iDVD project it plays as 4:3 even in a wide format iDVD project. Is this a glitch or am I doing something wrong? Is there a work around?

What Amorphizer does is set the widescreen flag in the file header so that it is recognized as such in iDVD.
Did you use the proper version based on your version of Quicktime (and do you have Quicktime Pro installed)?
F Shippey

Similar Messages

How change guide to wide screen?

All my boxes are HD. On two of them, the guide is wide screen showing 150 minutes of programming. On another it is not wide screen and it shows 90 minutes of programming? How do you change the settings for this?

denny wrote:
All my boxes are HD. On two of them, the guide is wide screen showing 150 minutes of programming. On another it is not wide screen and it shows 90 minutes of programming? How do you change the settings for this?
My guess is that the STB that does not display the wide screen Guide is a QIP6xxx box while your others are QIP7xxx boxes. The 6xxx boxes are simply not capable of displaying the HD Guide. You need to contact Verizon and request that they replace the 6xxx box with a 7xxx box. There will be no cost for Verizon to ship you the replacement STB.
Justin
FiOS TV, Internet, and phone user
QIP7232, QIP7100-P2, IMG 1.9A
Keller, TX 76248

When printing an AutoCAD-exported PDF file, the paper version has lines that screen does not show

Hello,
We were contacted by our customer, a landscape architectural company that uses our product, M-Color, (http://m-color.com) to plot AutoCAD drawings with required preferences and effects.
However, they provided us with a sample PDF files, that contain examples of scanned drawings, that have some "ghost lines" at the drawings that the screen does not show.
We tracked the issue and it appears to be an issue with Adobe Reader pringing. We tried many versions from 8.0 version onwards to the latest versions available in public, all represent the same issue.
This may be an issue of the original drawing having some line that was not marked ending at some point.
The zip file within the link below has three PDF files, two from the company that brought this issue to our awareness and the one with name "scanstation" is printed by me, and then scanned with markings to explain the issue.
Any ideas what would be the best solution to solve this issue?
https://skydrive.live.com/redir?resid=FF1904428CF64324!1445&authkey=!AMwkjv9QMg-Gawg

Edit>Preferences>Accessibility... Replace Document Colors (use custom colors - black on white)
That usually fixes ghosting...

Pictures never shows in wide screen!!

i have the latest ipod touch 64 and i install the latest update 4os ,when i use my ipod to see the pictures , its never shows in wide screen like before , i turn the ipod many times but resulgt is the same...i don't like that ???any solution..please help

Did you check if the screen orientation is turned off? Do this over the app switcher bar, flick one to the left, and there is the button with the lock.
And kill the Photo app when its not running - quit it, double-home, tap&hold on the icon and press the "-" badge.

Why can't I get wide screen when burning a dvd?

My sequence is all 1920x 1080 HD footage in mpeg2. My photos are all 1920 x1080 px. In encore if I want to burn a standard DVD it automatically goes to 720x480 if I choose " mpeg2dvd" format. Why isn't there a wide screen mpeg2 dvd format?

Colin, what you show is the dialog box when I do file> export media, right? Except mine is different (Pr 5.5 iss different?) and has a check box for "match source attributes" and when that is checked the format box is grayed out. And I don't see where you can customize anything.
What's the purpose of File>export media if it doesn't create a dvd?
If i do File> dyn link> send to encore there is no dialog box like you showed. it doesn't give any choices except dvd or blu ray and no "wide screen".
Are you all saying that 720x480 is all you get on a dvd and if your source is 16x9 it will squish it to fit? aren't hollywood dvd's in 16x9?

Unable to get HD Wide Screen 16:9 to fill the screen on TV.

12/20/08
Problem: I am not able to get HD Wide Screen 16:9 to fill the screen on TV. Leaves dark bands on the top and bottom of picture.
What I'm working with: Mac Pro Quad-Core Intel Xeon Processors with 2GB Memory soon to be 6GB & 30 inch screen. QuickTime Pro 7.5.5, Final Cut Express 4.0.1, and iDVD, 7.0.2.
New JVC, GZ-HD3U camcorder with QuickTime conversion software, recently updated, provided by JVC with the camera to change native TOD. files created in the camcorder to native MPEG2 files in Quicktime at a size of 1920 x 1080.
Two TV's, one Wide Screen HD and the other standard screen. I have changed the TV aspect rations back and forth from 4:3 to 16:9 and the only thing that changes is the size of the black bands on the top and bottom of the screen. The black spaces are larger in 16:9, making the picture appear squeezed.
I am using RW DVD discs so I can continue to try different setups without wasting discs and so far I have tried about 12 different arrangements. Two methods work but they are export conversions to a 4:3 aspect ratio and 720X480DV/DVCPRO-NTSC. Certainly this is a work around, but doing this looses the Wide Screen HD effects provided by the original JVC movies.
When I import the clips, and I've tried a number of different imports from QuickTime to Final Cut Express, I make sure that the Sequence set up matches or comes as close as possible to the imported clips. I've tried exporting them from FCE without changes and I have exported them using QuickTime to change them to different formats using nearly everything available trying to get the clips or sequences ready to import to iDVD.
In iDVD I have set up using both aspect ratios and it appears as thought setting up in 16:9 makes the spaces above and below even larger on TV. In fact it creates these spaces above and below even on the 720X480DV/DVCPRO-NTSC clips that work just fine on the 4:3 aspect ratio settings on the same TV.
If anyone has overcome this problem, I would greatly appreciate your guidance. So far, I've spent over a 100 hours on it to no avail.
Larry

Tom, I don't know where to go in FCE to create a AVCHD AIC Sequence. I can find the
1920X1080i60 in the Sequence format without any problem. And in QT don't know where to select AIC but I select Apple Intermediate Codec, and under compressor I select HDV 1080i interlaced frame rate 29.97. Under Export Size Settings I don't know rather to select 1920 x 1080 HD or HD 1920 x 1080 16:9 and what about preserve aspect ratio using and Deinterlace Source Video?
Part two: When I create a Sequence in FCE with the 1920X1080i60 designation, and then import a QT HD 1920X1080 16:9 Intermediate Codec clip into a bin and then open the clip in that sequence I'm asked if I want to match the clip to the sequence and if I don't I have rendering. If I match them the rendering, as you said, goes away. However, I notice that when I check out the Item Properties on them after the above process, the Aspect ratio in the clip and Sequence, suddenly becomes HD 1440x1080. Is this normal?
Larry

Green screen, downlading files and updating programs often stuck at 99%.

Okey so I have got this problem for a 20 days, since I build my own computer. Some videos on youtube and other video stream sites bug out in the way that the video just goes green, and starts fast forwarding. Then I think streams on twitch.tv for example, I cant watch a stream for longer than 20 second and the video gets frozen and the stream needs to be refreshed. And updating games, downloading files often gets stuck at very end of the progress, and it wont succesfully download or update. Im not sure is it about Flash Player/Shockwave Player but if there doesnt come example green screen it may show something like you are missing add-on Flashplayer but when i refresh the page it may run the video fine for some time.
The problem rarely happens at youtube but heres one where it happened Crs Piglet (Vayne) first ever NA Penta - YouTube
Heres video where the video didnt start at all and aswell when it did the screen gone green again and fast forward. (contains adds) http://www.thevideo.me/kmqcwhblzheh
Heres screenshots and one bad quality phone photo album of these problems, green screens, videos stuck, downloading stuck and updating stuck 99-100%. Imgur
Heres my computer specs:
My operating system is:          Microsoft Windows: 8.1 Pro, 64-bit
Processor:                             Intel(R) Core(TM) i5-4690K CPU @ 3.50GHz
Graphic card:                         Nvidia GeForce GTX 760     Driver updated to: Geforce Game Ready Driver 347.52.
Memory (ram):                       8GB
Motherboard:                         MAXIMUS VII RANGER
Dont know what else info I could put on about my computer really... I have tried to find answer, like disabling hardware acceleration, deleting flashplayer memory file, safe modes and all kind of tips I as able to find from internet.
And I use mozilla firefox (36.0), but the problems happens aswell in Internet Explorer. I have updated Flash Player (16,0,0,305), my drivers (Geforce Game Ready Driver 347.52), all windows updates, java(1.8.0?), but still cant find the answer why watching videos/streams work well.
Im sorry if I missed some info but ask if theres something.

The green screen means that hardware decoding has failed. It's probably a subtle, intermittent driver bug.
You can disable hardware acceleration in Flash to avoid this while you wait for updated drivers to become available:
Video playback issues

Trying to install snow leopard on my Macbook Pro. After already having problems with Grey screen, blinking file with a question mark, etc. Computer now says that one of the hard drives is failing.The "hitachi" drive says it's failing in disc utility.

o.k. So, I've been tinkering with several "self help" fixes for several days now with no positive results. I'll explain my initial problems and then end with my most current situation. In hopes that someone out there will have a good suggestion or possibly remedy for the issues i'm facing
First, my problem started after my wife played a game on my macbook pro and the computer froze. She went into a panic and decided to shut down via power button. When computer restarted she got the blinking file/grey screen and that problem continued for a couple of days before I began using steps from various support topics from apple concerning the grey screen/blinking file folder.
Ultimately, yesterday I decided to erase my Macintosh HD file as one tip suggested. Following the brief online and on screen (via the process) tips that were there. Once that was completed I attempted to reinstall snow leopard (my most current version on hand) into the pc.
At first, I thought this would work. It looked promising. But, after several hours the installation screen returned with failure. I attempted to repeat. And, even repair drives during this try and re-try process.
Now, today, one of the drives.. "hitachi..." states that it's failing and is in red letters with no ability to repair via the disc utility screen. The Macintosh HD drive shows that it's o.k. But, this drive is listed under the HItachi drive so I think that's where a problem might lay.
So, I guess my question really revolves around.. What if anything can I do to get the hitachi drive back up? (short of taking it to a repair facility and replacing.)
And, how on earth can i get my OSX back up to I have a laptop again.
Operating on a macbook pro here. It's my lifeline. Otherwise, I am using a Windows desktop that i'm not that fond of. lol
I'm trying to bring this 2006 laptop back to life. Trying to avoid a rather expensive repair or the purchase of a new laptop. Also expensive...
Any help would be appreciated.

Well, running on a 2006 model. I did not have a startup disc. Initially, it booted up on original software in 2006. Since then, I've upgraded to 10.6 via a box set. And, since then I think I popped it up to lion.
All I have on a disc is snow leopard. And, I can't get farther than the setup screen due to hard drive. I'm taking to a apple authorized repair store right now. We'll see what they tell me . I'm just going to weigh the cost of repair vs. buying new.
Another bad, stupid thing is I had no means of backing up my stuff. So, I might have lost things like music, vids, etc. we'll see if they can recover. If the cost is too much for repair I might just forget it and start over with a new system. Just not sure at this point.

TS3276 the images (attachments) are automatically resized (smaller) when I send them to a customer. My email screen does not show a drop down menu box where you can leave as actual size. Is there a setting elsewhere that can be set.

Any suggestions on problem I have. I receive images, say a file that is 3 mgs through email on Safari mail and when I try to resend it or forward it or any other larger file, when it sends the file is reduced by about 1/3. My screen does not show and drop down menu with a feature to keep actual size or reduce that is suggested when I looked up solutions to the problem. I can't find a setting anywhere in mail that I can change to make sure my files are kept at actual size. I figure a setting got changed -don't know how - but it happened about a month ago. Caused problems as I work in graphics can't send files to clients as they come out too small. Any suggestions on how to fix.
Thanks

What email program are you using? And what do you mean by "Safari mail"?

Gnome looks 4:3 on a my wide screen [SOLVED]

Hello!
I just installed Arch on my small Samsung Q45 notebook (with wide screen), and I'm having this curious problem with Gnome: even though X seems to stard at the correct resolution of 1280x800, Gnome panels do not fill up the full space.
An image is worth a thousand words so here we go:
http://www.italpro.net/images/gnome-strange.jpg
As you can see, the area at the right or at the bottom is perfectly usable, as I can move icons and windows there. However, the panels don't expand to fill it. This is probably due to a thing you can see in the screen resolution preferences dialog in the upper-right part of the screen: Gnome sees my screen as a 4:3 1024x768!!! Also it shows a weird refresh rate of 30hz.
Besides this problem, I can see everything perfectly well (readable chars, no flickers, perfect colours), so that must be a Gnome-related issue...?
Thanks,
Michele.
Last edited by lordarthas (2008-02-10 13:15:54)

Hello!
uastasi wrote:Take a look to your /etc/X11/xorg.conf at Monitor Section and try editing your refresh rate.
VertRefresh is set to:
VertRefresh 50.0 - 75.0
which is a setting that doesn't even include the 30.0 that Gnome is showing me in the resolution preferences dialog. Moreover, I see things perfectly well, so I think X is correctly started at 1280x800@60Hz - it's just Gnome that seems to not be understanding that! Anyhow, I tried changing the above line to:
VertRefresh 60.0
but nothing really changes.
You can also switch to tty1 and see if it is an issue related to Gnome.
It is: on text terminals, and even with other X window managers, everything works. It's just Gnome (and it's related GDM) which size themselves wrongly.
Thanks,
Michele.

.xmp files showing up in my SD card when accessing RAW files in Finder... Very weird!

Hi,
I'm having a very weird problem... I'm using a 4GB Scandisk SD card and am shooting my RAW photos on a Canon Rebel 2ti. I'm using a Macbook Pro, 2011 2.3Ghz i5, 4gb of Ram, with Lion v. 10.7.2 and am accessing the SD card RAW files through Finder. I'm secondary clicking on the image file or double clicking them as PS is my default opening program for RAW files. When I hit the "Done" key on any of the Photoshop files, a new .xmp file shows up in Finder. When I open it, it's a Microsoft Messenger for Mac 8 License Agreement...
I do have Microsoft Office 11 installed and have never used Messenger. It's not a huge deal, but it's driving me crazy and it's totally weird!
Thanks,
-Dave

It's a lot of separate, unrelated things happening to you in one long chain, but each step is normal and explainable.
You are opening raw files straight from a card into Photoshop. Photoshop will open them in Camera Raw. Camera Raw's preferences are set to save changes in XMP sidecar files. You are clicking Done, which applies the default Camera Raw processing, and that change generates an XMP file to store these new settings. That's why an XMP file is showing up in the same folder. On a computer, that's fine. But writing back out to a camera card with a device other than the camera is not recommended. What is recommended is to use another, faster way to preview raw files on a card without changing them (Adobe Bridge, Lightroom, Apple Aperture, Photo Mechanic, etc.), so that the card's left untouched as it should be.
If you don't want the XMP file to be generated, you have to do just one of the following:
In Camera Raw preferences, change the "Save image settings in" option to "Camera Raw database", not "Sidecar XMP files".
Instead of clicking Done every time, which applies any changes, click Cancel instead, if you were just looking and not editing.
Use something other than Photoshop to preview raw files. Most of the other ways are faster than opening them in Photoshop. The recommended workflow is to use a camera downloading utility to look through all the images on the card at once (instead of one by one as you are doing), and then select only the ones you want to bring into your computer. Bridge (via File > Get Photos from Camera, not by browsing), Lightroom, Aperture, and iPhoto all have that capability.
As to why double-clicking an XMP file opens a Messenger license agreement: As you probably know, the system has to figure out what program should open a file with a given filename extension. It sounds like maybe both Adobe and Microsoft have used the XMP extension, and the Office installer probably associated it with some type of MS Messenger file. So when you double-click an XMP file, Mac OS X opens Messenger. Since you have not used Messenger before, it's showing you the "first run" screen for Messenger, and Microsoft has set it up so that you have to click Agree on the license agreement before using it. If you never click Agree, it will still be the "first run" next time you open Messenger, whether you meant to or not. You can use Get Info in the Mac Finder to reassign XMP to open in another program.
You probably didn't expect so many things to happen from just opening a raw file off a card, but that's the way it worked out.

Strange System Files Showing Up Everywhere

Roughly two weeks ago I started noticing all kinds of unfamiliar system files showing up in a number of my folders. They are always grayed out and as far as I know have nothing to do with the actual folder. These are just straight forward folders and/or my actual Mac hard drive. Any idea where they may be coming from? I don't know that any of them are actual system files that might be important. The second link, the CODES folder should be the only file in that folder. Here are links to a couple of them.
http://dl.dropbox.com/u/224808/Screen%20Shot%202012-03-26%20at%207.21.35%20PM.pn g
http://dl.dropbox.com/u/224808/Screen%20Shot%202012-03-26%20at%207.22.09%20PM.pn g

One more time.

Change of ratio from 4 x 3 to 16 x 9 wide screen..

Change of ratio from 4 x 3 to 16 x 9 wide screen.. in FCX pro
Can anybody please help me, who has prior knowledge of changing the ratio from 4 x 3 to 16.9 widescreen that I have already imported.. I have tried everything in the preferences.. Before I imported it, and after, however it is not working. It’s been imported from a FlashCARD… Thank you in anticipation

Hello once again Tom, sorry for the inconvenience, I'm quite new to this Final Cut Pro as you can tell. However here is information you requested I hope I got it right for you.
I will do my best to explain as I go on. I'm using a Canon XL2 broadcast camera which is capable of shooting in 9 x 6 and 4 x 3. It is a DV tape camera and additional to that I have on the back a datavideo (DN 60) flash card recorder. I do believe that the flash card recorder records in 16 x 9, so I am told by the distributors. I'm also told by the same distributors that for some reason Final Cut Pro X does not recognise the 16 x 9 flag, however Adobe, Sony Vegas etc they do recognise it and allow you to change the ratio size in their software. When I use the tape from the camera it exports into Final Cut Pro X as 16 x 9, so I will thought that the flash card recorder would record in the same format.
I can tell by the size of the clip in the viewfinder that it is not 16 x 9 when I import it in, I also make a quick 10 second movie and set that as my master file, no matter what I use to import it in the preferences it still won't stretch to widescreen, or in fact anything else I do as I send it to a master file, anything else than this I am at a loss, not sure what to do. I hope the picture of the move inspector is what you require also including the picture to let you see the size in reference.

IPhoto screen-saver Slide show, where is it?

I'm looking for pictures that show in the Screen saver slide show but not in iPhoto or Aperture folders.
They were there last week.
Hoping for help!

I had a quick scan of those comments, and most of those are from more than 18 months ago. The comments from this year are either: factually wrong ("very few slideshow designs" - it has 35 or thereabouts) or complaints about the Upgrade policy.
There is no substitute for downloading and trying it yourself.
Alternatives to iPhoto's slideshow include:
iMovie, on every Mac sold, as is iDVD.
Others, in order of price:
PhotoPresenter $29
PhotoToMovie $49.95
PulpMotion $129
FotoMagico $29 (Home version) ($149 Pro version, which includes PhotoPresenter)
Final Cut Express $199
It's difficult to compare these apps. They have differences in capability - some are driven off templates. some aren't. Some have a wider variety of transitions. Others will have excellent audio controls. It's worth checking them out to see what meets your needs.
However, there is no doubt that Final Cut Express is the most capable app of them all. You get what you pay for.
Regards
TD

My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

My ibook g4 took a install from apple update . Why is it not going past the screen where is shows Mac OS X

Did you verify the hard drive before installing the update? You could have had hard drive corruption where the computer did not know where all the files are and something didn't get installed correctly.
Did you repair permissions? The installer may not have been able to overwrite a file if the permissions on files were not set correctly.
Frankly, the easiest thing will be to re-install the operating system from the installer disc. While booted to the disc make sure you run Disk Utility First Aid to repair the drive and permissions, then install. Many of us prefer to download updates from Apple rather than rely upon Software update. we use SU to tell us what we need but we download them separately.
For which operating system was this update? Apple hasn't brought out a new system update for G4s in quite a while.

Wide Screen .DV files show as 4:3 in iDVD 6.0.3

Similar Messages

Maybe you are looking for