Wide screen help?! im stuck

Hi,
Can anyone offer some advice? I have been working on my
animation project in flash to the ratio of 550px over 400px and
have only just realized it has to be wide screen format of 1024 px
over 768 px and now i don't know what to do? will i have to start
all over again and stretch out every key? I have tried to see what
it looks like with one key and it looks stretched and wrong?! what
is the purpose of using wide screen and do you think it would be
better if i just kept it at 550px over 400px? its for a university
presentation.
Thankyou for your time,
Lauren

I dunno, seems like you should be able to scale up the SWF to
about 190% and that would be very close to filling the screen. Use
the Publish settings to set the scale size, scale both aspects
identically to retain your proportions.

Similar Messages

My iPod touch is disabled and has a passcode but it won't let me type in the passcode it's stuck on connect to iTunes screen help!!!!!

My iPod touch 8th 3rd gen is stuck on the connect to iTunes screen and won't let me do anything and iTunes won't restore it or do anything because there is a password on it and I can't type it in on the touch since it's stuck on this screen help please I've tried doin the power and menu button to restart it and it goes right back to connect to iTunes someone please helpme

Try again placing the iPod in recovery mode. It can be tricky. The computer should say it discovered an iPod in recovery mode. Recovery mode bypasses the passcode (and erases the iPod). If not successful, try placing the iPod in DFU mode.
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

SAP Help for Wide-Screens.

Hi All,
I have a <b>wide screen laptop</b> and I am connected to a SAP Server. Whenever I click F1 for help it only shows me blank help screen. However when I try the same thing in a desktop or a normal screen laptop it works fine.
Please Help

Thanks

Help! Stuck on boot screen (no spinning) after Lion upgrade.

Did an install of Lion on husbands week and a half old macbook pro 15". Right as I started the installation I had to get up to help my little one go back to bed. Briefly checked the progress of the install when I got back to the computer, still had some time left so I went to watch TV. Got up to see the boot screen up and decided to give the install more time just in case. It's now been about 2-3 hours on the boot screen. What should I do. I should mention the drive already has a bootcamp partition as well as the SL partition. Please help! I'm really hoping I didn't break his new computer (Tech really isn't his thing so it's up to me).
This is the screen I'm stuck on. Cursor works but that's it.

Re-starting and re-installing from the bootable drive I made seems to have fixed the issue. I'm performing a disk and permission repair now in disk utilities as a precaution now. Reinstall from disk took forever. Unfortunately didn't have any available USB or Firewire drives to try an alternate means of install.

Wide screen aspect ratio help

hi everyone im new in final cut pro, and i need some guidance, help or tutorial on how to achieve the widescreen aspect ratio to give the video more like a film look and feel, i need to know how to do this without distorting the video or cropping or making it look stretchy it if its possible. A tutorial would be awesome please if someone can help me, i would really appreciate this i looked around for this but i cant really find anything (i might have been looking in the wrong places :[ ) thanks

im not sure this are the dimensions 1280 × 720 i think (im not too sure) it was wide screen. for example if i used my iphone for in landscape mode i think it comes out wide screen right? so then how would i do it not sure what really but is there any chance that without it having to be shoot wide screen make it wide screen without it looking bad ??

High Quality Wide Screen for YouTube - PLEASE HELP!

I am using a Panasonic PV-GS400 camera in wide-screen mode (this is another topic, but the camera still outputs 720 x 480 video, my understanding is that it is called "anamorphic wide screen"). I had figured out some settings to get my videos to appear in "High Quality" mode, wide screen (16:9) in YouTube, but the last couple of times I have tried these settings, they didn't work. Here's what I used:
- Windows Media 856 x 480 frame size
- Frame rate 29.97kbps
- Pixel aspect ratio - square (1.0)
- 2 encoding passes
I got the 856 x 480 ratio from another website. I don't really understand why the pixel aspect ratio needs to be square, but when I tried 16:9 aspect ratio, the video is letterboxed. I also don't understand the two different project modes for PE7 (when creating a new project you can choose the format 4:3 or 16:9). Maybe someone can explain how the widescreen project setting works. Perhaps it is something similar to how my camera does widescreen but the videos are still 720 x 480.
At any rate, if someone has settings that will reliably produce wide screen videos that appear in YouTube's "high quality" mode, I'd appreciate it! Thanks.

As we often say on this forum, the biggest challenge with working with YouTube is that, as soon as someone figures it out, YouTube changes the rules again.
Here's what we've posted to the FAQs at the top of this forum.
http://www.adobeforums.com/webx/.59b6efbd/1

How to get a WIDE screen view in Laptop...

I am using Sun Solaris 10 for x86 on Virtual Machine. But i am unable to get a wide screen view. I have a 15.4" screen laptop.
Do i need to change any setting in my Vitual Box????
Presently, i am getting a view having Aspect ration 1:1. i am looking for 16:9 aspect ration screen.

Hey,
Wide screen view for Solaris on virtual machine? I use the newest [virtualbox for windows|http://www.softsea.com/review/VirtualBox-for-Windows.html] version, what if you use vboxmanage setextradata resolution x*y? Look in the manual for the correct syntax. It might actually work. you can also try to force it in xorg.conf.
Hope this tip can help.

Change of ratio from 4 x 3 to 16 x 9 wide screen..

Change of ratio from 4 x 3 to 16 x 9 wide screen.. in FCX pro
Can anybody please help me, who has prior knowledge of changing the ratio from 4 x 3 to 16.9 widescreen that I have already imported.. I have tried everything in the preferences.. Before I imported it, and after, however it is not working. It’s been imported from a FlashCARD… Thank you in anticipation

Hello once again Tom, sorry for the inconvenience, I'm quite new to this Final Cut Pro as you can tell. However here is information you requested I hope I got it right for you.
I will do my best to explain as I go on. I'm using a Canon XL2 broadcast camera which is capable of shooting in 9 x 6 and 4 x 3. It is a DV tape camera and additional to that I have on the back a datavideo (DN 60) flash card recorder. I do believe that the flash card recorder records in 16 x 9, so I am told by the distributors. I'm also told by the same distributors that for some reason Final Cut Pro X does not recognise the 16 x 9 flag, however Adobe, Sony Vegas etc they do recognise it and allow you to change the ratio size in their software. When I use the tape from the camera it exports into Final Cut Pro X as 16 x 9, so I will thought that the flash card recorder would record in the same format.
I can tell by the size of the clip in the viewfinder that it is not 16 x 9 when I import it in, I also make a quick 10 second movie and set that as my master file, no matter what I use to import it in the preferences it still won't stretch to widescreen, or in fact anything else I do as I send it to a master file, anything else than this I am at a loss, not sure what to do. I hope the picture of the move inspector is what you require also including the picture to let you see the size in reference.

Sick of wide-screens!

I'm a graphic artist. I need a big screen to see what I'm doing. Ever since Mac started making wide-screens, the screens are wider, but the height is too small! So in order to get the right viewing size for that I'm doing with wide-screen I need to buy a laptop or computer with a HUGE SCREEN. Also I have a full-screen wacom tablet. I don't have 360$ more to buy ANOTHER ONE in full-screen!
I wish you guys would fix this and make them in BOTH SIZES! So we have a choice! Yes wide-screen is good for movies and crap but the new MacBook is useless for detailed graphic design unless you buy an external monitor at 17-20+ inches. But the problem there is you can't take it everywhere with you! Allot of artists travel allot and this doesn't help. Not all of us are rich enough to set up home offices and crap. And if you're on the go all the time you CAN'T!
So in short- PLEASE GET THE NORMAL FULL-SCREEN SIZES BACK!!!!!!!!!!!! This IS NOT fair!
13-inches of WIDE-SCREEN is like buying a tiny portable DVD player, NOT A COMPUTER!
Thank you.

The res has more height but the actual screen size makes it look smaller. Kinda like having a 12 inch screen set on 1024x768 looks allot smaller so it all fits, vs a 14 inch screen with the same res it looks bigger cause the screens bigger.
When you're doing detailed work it's nice to see what you're doing. Zooming in only works sometimes but if you need to see a large area, having a small screen wouldn't be very helpful. You'd still see the same amount of area but it's smaller. Ya know? Like looking at it from far away.
Neh I just had a moment. I wish this stupid thing had an edit posts. I'd make it less angry. I just don't see why they made it a 13 inch instead of a 15 inch. Hopefully they'll work something out.
It's just bad when you're broke and starting out and trying to get higher up and everything is so much money for anything decent. Then when you get what you need for one thing they change it and you have to update.

My After Effects re sized after a ram preview in full screen and is stuck like that.

My After Effects re sized after a ram preview in full screen and is stuck like that.even if I restart. I'm not able to acces any of the top tools.

What are the pixel dimensions of your monitor?
You can reset the workspace to its default by deleting your preferences folder.
Information on finding and deleting the preferences folder can be found here, in After Effects Help:
http://help.adobe.com/en_US/aftereffects/cs/using/WS37cb61f8f3397d86-164c9f19127035dd253-8 000.html

Poor Quality in Wide-Screen When Exporting HD to Quicktime

Hello all...
I'm working on a fairly large project in iMovie HD with wide-screen footage from my Sony HDR-HC3 and have hit a wall.
I can't seem to get a good result when I export clips into Quicktime in a wide-screen format. They are a bit choppy & you can see bits of some horizontal lines. The same video exported in full-screen VGA looks great. Any tips...? I basically just want to make good quality QT movies watchable on my computer that maintain the original aspect ratio (and LOOK like they do in iMovie!)
The entire project is around 100GB and I currently have almost 40GB of free space. Any help appreciated!
Dual 2.3 G5 with 4.5GB Ram Mac OS X (10.4.6)

What do you need to end up with? Just a file to play back or burn to a DVD or make a web stream or?
Jerry

Wide screen on Solaris 10

Hi,
I'm trying to get my wide screen work on Solaris 10 at resolution 1680x1050. I know that both my video card and my screen support this resolution, but I fail to get it working. For some reason, I am stuck in an ugly 1400x1050 or 1280x1024 resolution.
I've got:
- a 22'' LG wide screen W2252TQ, that can do 1680x1050 @60Hz,
- an ATI Radeon Xpress 1200 Series video card that supports 1680x1050
@60Hz
- Solaris 10 u5 on x86, using the Xorg X server (not Xsun)
I have a working xorg.conf (with a previous screen). I tried to customize the /etc/X11/xorg.conf for my new screen. Basically, my Monitor Section has my synchronization rates and the device section specifies vesa. I tried also ati or radeon or radeonhd but they are not recognized.
Section "Monitor"
Identifier "lg"
HorizSync 30-83
VertRefresh 56-75
EndSection
Section "Screen"
Identifier "Screen 1"
Device "videocard"
Monitor "lg"
DefaultDepth 24
Subsection "Display"
Depth 24
Modes "1680x1050" "1280x1024"
ViewPort 0 0
EndSubsection
EndSection
Then, I tried several configuration without success:
- adding a modeline line taken from the cvt command
Modeline "1680x1050R" 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync
or
Modeline "1680x1050" 146.25 1680 1784 1960 2240 1050 1053 1059 1089 +hsync -vsync
- adding a virtual size in the display subsection of screen (because I have a warning concerning that in the log)
Virtual 1680 1050
- I made sure with kdmconfig that I was using Xorg and not Xsun.
But xdpyinfo reports I am always in 1400x1050 or 1280x1024... I never get to 1680x1050, and it's pretty ugly.

Hello.
The "Virtual" line has no influence on the real screen size. It enables you to have a bigger screen than your display device (e.g. Virtual=2000x1000 and real display=1024x768) using scrolling.
I have Solaris 10 running wide screen (1280x1024) on my laptop and I had to write a special program for that (that will only run with a special graphics card, not with the ATI).
Martin

Why can´t I watch Firefox on wide-screen resolution? IE works. How do I change it because the PC seems to be OK!

And everything else works on wide-screen, except Firefox

Try to disable hardware acceleration.
*Tools > Options > Advanced > General > Browsing: "Use hardware acceleration when available"
*https://hacks.mozilla.org/2010/09/hardware-acceleration/
If disabling hardware acceleration works then check if there is an update available for your graphics display driver.
*https://support.mozilla.org/kb/how-do-i-upgrade-my-graphics-drivers
If the problem if with Flash videos then try to "disable the hardware acceleration" in the Flash Player.
*http://helpx.adobe.com/flash-player/kb/video-playback-issues.html
See also:
* https://support.mozilla.org/kb/Cannot+view+full+screen+Flash+videos
Flash "Display settings" window:
* http://www.macromedia.com/support/documentation/en/flashplayer/help/help01.html

Hi, i have a iMac PC it has a letter box home page and i would like to change it to a full screen, HELP pleasell

Hi, my name is Cathy Pack and i am in a pickle, i have an i-Mac OS X version10.5.8, 1.25ghz power G4, every thing is fine except for my home screen it is in letterbox forme and i would like to put it in full screen, the screen is long and narrow instead of short and wide, Please HELP, Cathy Pack

Apple menu -> System Preferences -> Displays. Take the resolution ratios and use a 16x9 ratio to avoid the letterboxing if you have a 17" diagonal display. Take the 4:3 ratios if you have a 15" diagonal screen.

Can I adjust Video Media to Wide Screen viewing? HOW?

Can I adjust Video Media to Wide Screen viewing? HOW?
Thanks to anyone that will answer and help with this.
Cheers!

see my post: https://discussions.apple.com/message/8998807?messageID=8998807&amp%3b#8998807
and last post here: https://discussions.apple.com/message/9985879#9985879

Wide screen help?! im stuck

Similar Messages

Maybe you are looking for