Widescreen footage using the windows media encoder of Matrox 100

I use PPRO 2.0 with the matrox 100 card. I will encode a footage, shoot in widescreen. Normally when I have a 4:3 picture I use the Matrox mediaencoding for WMP and this works fine. But the matrox mediaencoder settings doesn't have a widescreen setting.
Using the PPRO encoder in widescreen setting,  the picture is distorted, maybe because of the many time dicussed Matrox system.
Can anyone give me suggestions to encode a matrox build footage into a mediaencoded footage using the matrox media encoder or otherwise?
Thanks
Chris

Thanks for replying.
The solution I finally use is to export the AVI in windows media encoder and encode it to WMV format. This works but is as bit more time consuming than directly use the Matrox encoder in PPRO as I use for 4:3 footages (which have no widescreen option).
Chris

Similar Messages

  • How can i download movies from a website that use the windows media extention it specifically sends the media through the windows media extension

    '''there is a website i visit frequently and i have tried all the downloader extensions how do i download the movie from the sight if it uses windows media extension'''

    Thanks for the excellent advice, all! I started with BitPim, and have hit a bit of a deadend with the application not being able to detect the phone - I can manually set the port location to the phone (and it shows up as an LG device), but then get a "false" and no connection. So I suspect that's something on the phone end blocking access from a computer via USB... I'll dig around on that a bit.
    Thanks, also, for the suggestion to buy a BlueTooth adapter - that's my next step in this... although after reading the link/review about Verizon's attitude toward open file transfer, I may be severing my ties with them. I've been happy with the phone service, but this is really annoying.
    This is what happens when you assume that Mac people exist in the rest of the corporate sphere..! To think that I would assume that a phone/camera with a USB cable would actually be capable of connecting to a computer and transferring files!
    Thanks, again!
    Tom

  • When you use the Windows Media Sync to down load music from the PC to the Razr?

    What folder is the music stored in? I can see the music on my phone under My Music but I cannot see it on the V CAST Media Manager.

    It really depends on how you got the music on there in the first place.  Usually, I think, it goes into a music folder.  Also, make sure to check both the SD card and internal storage.

  • How can I make the Windows Media player the default player for my browser.

    I cannot listen to radio station WYSL 1040 AM on the web. They say that the default player on my browser must be the Windows Media player. How do I comply with their demand?

    In Firefox it is the MIME type that determines which player is selected.
    Install the new WMP plugin (np-mswmp.dll), you only have the classic WMP plugin (Npdsplay dll)
    * https://support.mozilla.com/kb/Using+the+Windows+Media+Player+plugin+with+Firefox
    * http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin
    * http://www.interoperabilitybridges.com/windows-media-player-firefox-plugin-download

  • The windows media play plug in will not install or work with firefox, but will with crappy ie. Plese help

    I go to the website of microsoft and download it even followed the help page forums on here and it still has an error when loading.

    See:
    [[Using the Windows Media Player plugin with Firefox]]
    http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

  • The windows media doesnt play music

    THE WINDOWS MEDIA DOESNT PLAY MUSIC

    See:
    [[Using the Windows Media Player plugin with Firefox]]
    http://kb.mozillazine.org/Windows_Media_Player#Missing_plugin

  • How does one use JavaScript with the Windows Media Player Plugin?

    Hi there.
    According to this old [http://msdn.microsoft.com/en-us/library/dd564570%28v=VS.85%29.aspx MSDN Article] it is possible to control the windows media player plugin using javascript.
    It provides a series of objects off the object that should perform certain funtions, such as play stop and seek.
    It states very clearly in the article that some are not supported; however, none of them seem to be working with the latest version(s?) of Firefox.
    I have Firefox 5 installed currently and have not tested in any other version, so I'm not sure when it stopped working.
    The video does load and will display properly -- the ability to control it through javascript however, does not work.
    i.e.:
    var mplay = document.getElementById('myplayer');
    mplay.controls.play(); // mplay.controls is undefined
    This same code works in Internet Explorer.

    You need to place the URL in a data attribute for Firefox.
    <pre><nowiki>document.write(' <OBJECT id="Player" data="http://87.117.197.189:16229" width="320" height="45" type="application/x-ms-wmp">');
    document.write(' <param name="AudioStream" value="true">');
    document.write(' <param name="Enabled" value="True">');
    document.write(' <param name="ClickToPlay" value="false">');
    document.write(' <param name="BufferingTime" value="5">');
    document.write(' <param name="ShowDisplay" value="False">');
    document.write(' <param name="Volume" value="70">');
    document.write(' <param name="autoStart" value="true">');
    document.write(' </OBJECT>');</nowiki></pre>

  • When I add my composition to the Adobe Media Encoder from After Effects, it renders out incorrectly?

    Why is it that when I add my composition directly from after effects to the adobe media encoder, it renders out of the adobe media encoder incorrectly? By that I mean the video comes out a little scrambled- parts of it overlap other parts. Is this an issue with 'dynamic link'? Did I do something wrong? I'm working in CC.

    I also don't understand what you are saying. What do you mean by "parts of it overlap other parts"? A screen shot might help.
    What were your render settings in AME? (Format, Codec, data rate, etc.)
    What is in your AE comp? If footage, tell us what format, codec, etc. Tell us what effects were used too.
    What exact version number of AE CC are you using?

  • Problem with windows media encoder

    Hello all,
     I am developing an application using labview which has to take the screen capture and should be able to save as *.avi or *.wmv.For that i am windows media encoder application from microsoft.I am using windows vista 64 bit OS.I am getting this error
    "E:\DashBoard_Production\wmcmd.vbs(378, 1) WScript.CreateObject: Could not create object named "WMEncEng.WMEncoder".
    Can anybody help me to solve this?
    Thanks and regards,
    srikrishnaNF

    hi, did you solve your problem?
    i have the same problem with python script i have made.
    lucas

  • Qosmio G30-163: Windows media encoder doesn't recognise video device

    I cannot get Windows media encoder to recognise my video camera connected to S-video port (Qosmio G30-163).
    I get similar problem with Marratech pro webconferencing application (it crashes after 15-20 second if I try to use it - during the time the application is frosen - in configuration I can see the test picture/video).
    If I use InterVideo WinDVD Creator 2 Platinum bundled software for capturing video it works just fine.

    Hi Nesko
    In my opinion you see this issue a little bit wrong. You are right about some standards but you must know that every hardware manufacturers dont care much about that. Other way Toshiba as notebook producer can not test all cams and external devices with the unit and also all software you can find on the market. It is a mission impossible.
    Qosmio is a multimedia unit and if you read specification about that you will see that you can do everything listed there (watch TV, connect camcorder and create own DVD movies etc.). Every one of us has some specific and unique wishes but nobody can guarantee that everything you want will work.
    For example: since almost a year I have Qosmio G20. I have tested it with my camcorder, with VHS recorder using it with preinstalled and also third part software and for every situation I have found solution and it work somehow.
    I really dont know which cam you have but if you want to have web conferencing without any problems you should by USB webcam with highest resolutions and frames per second. Web cam will be recognized and installed very fast and you can use it any time. Sorry but web conferencing via MCE and cam is not known to me.
    Anyway you can try to contact support. Maybe they have some magic\solution. If you will find out how it works please write again. I am really interested if something like that is possible.
    Good luck!

  • Export to windows media encoder-PPro crashes

    Every time I try to export to Adobe Media encoder: windows media: PPro crashes.
    I am working on a 64k computer using the 32k version of PPro CS3.
    Every other format in the media encoder works fine.
    Does anyone have any solutions or know why this happens?
    Thanks,
    J.

    J.Charette, "Export to windows media encoder-PPro crashes" #, 15 Jan 2009 12:24 pm
    This thread is getting a bit old now but I'm now having the exact same problem as J.Charette. I think I may have some light to shed on it as well. I was successfully running CS3 master collection and exporting to WMV files in PPro/AE for the past year under XP64. I was given a new computer (again XP64) and didn't have any problems until I installed Microsoft Windows Media Encoder 64 (I used to use the 32 bit version successfully and this time figured I'd just get the 64 bit one instead).
    Now that I've installed WME I can't export as WMV from any AE/PPro CS3. As soon as AME comes up with the format selection screen, if I select WMV from the drop down box it immediately crashes. I've tried uninstalling WME, reinstalling it and even uninstalling WME & CS3 and reinstalling from scratch. Still doesn't work.
    In my case at least, there is a definite correlation between installing WME64 and its interaction with Adobe Media Encoder... Anyone have any suggestions? It seems to me there must be some registry setting / config file for AME that is causing it to try to use WME64 for something which causes a crash (since 32 and 64 bit apps can't call each other).
    Ideas?
    Thanks,
    Christopher Grant

  • Exporting Cross Platforms/Windows Media Encoder

    (I know this is an apple forum, but I have transferred videos across platforms from a Mac to a PC. My employer wants me to create wmv files to play on windows media player and all the other forums told me to cross platforms if I couldn't pay for a program to export through Final Cut Pro.)
    Long story short, I exported out of FCP into M2v files. The files are now on the PC, where they play fine. However, when I try to convert into wmv, I lose the first 3-4 seconds of video and it throws the audio off by that much. Am I doing something in Windows Media Encoder to lose that or was the initial transfer from FCP the problem?
    Any help would be great.

    No answer from me about what to do on your PC, but you might go directly from FCP to WMV using Flip4Mac in trial mode. It will give you 1/2 the duration of a clip, up to 30 seconds, so you can test whether it works for your purpose. Could be worth chunking out the $49. for the license.

  • How do I cope with the Adobe Media Encoder running high cpu consuming

    Hi All
    How do I cope with the Adobe Media Encoder running high cpu consuming.
    This always happens when I do a render using Adobe Media Encoder CS6.
    I was annoyed because I was 100% cpu.
    is there a solution?
    I use Adobe Media Encoder CS6 v6.0.3.1 (64bit)
    System Information Report
    Operating System: Microsoft Windows 7 Ultimate
    System Type: 64 bit
    Central Processor: Intel(R) Core(TM) i5-2500 CPU @ 3.30GHz x4
    User Name: Gepenk
    Video Adapter: ATI Radeon HD 4600 Series
    Video Memory: 1.00 GB
    Screen Resolution: 1360 x 768
    Total Memory: 7.98 GB
    Free Memory: 5.69 GB
    Total Hard disk: 931.41 GB
    Free Hard disk: 102.02 GB
    Mouse: USB Optical Mouse
    Keyboard: Standard PS/2 Keyboard
    THANKS

    Some reading to explain both:
    https://www.google.com/search?q=faster%2C+hyperthreaded+processor&oq=faster%2C+hyperthread ed%C2%A0+processor&aqs=chrome.…
    Tweakers Page

  • Webcam on Satellite A200 doesn't work with Windows Media Encoder

    Hardware: TOSHIBA Satellite A200 (1GH) with integrated Chicony webcam.
    PROBLEM:
    When i using webcam by Chicony software - it's working allright (video recorded normaly).
    BUT: when i closing Chicony software, and starting Windows Media Encoder (preinstalled with Vista) - when i try to select webcam as input device - error is reported "device is not ready".
    This error also repeated if I select for webcam Microsoft webcam driver instead of Chicony native driver.

    Hi
    Download the newest Chicony driver and software from the Toshiba page and install it.
    Dont forget to remove the old version.
    Furthermore if you get the error message like webcam is use by another application or "device is not ready you should start the msconfig and should disable and enable the chicony webcam service and process.
    Bye

  • Audio delay in Windows Media Encoder

    I am using WME for broadcasting (streaming).
    The video source (digtal mixer) has a delay of 200ms.
    The audio source (soundcard) has no delay.
    Audio and video are now out of sync.
    WME has no audio offset option, is there another way to delay the audio for 200ms?
    Is there maybe a plugin for WME that can delay the audio?

    This will help you to configure:
    http://forum.videohelp.com/threads/169292-How-to-stream-live-TV-using-Windows-Media-Encoder
    You may try VLC Player ,Stream What You Hear
    S.Sengupta, Windows Entertainment and Connected Home MVP

Maybe you are looking for

  • R/3 Table for corresponding BW Cube

    Hi BW Gurus,      What is the R/3 table which staores all the details of the BW cubes request details like, Info package that is being loaded, what is the start time, date, no. records loaded, selection conditions, type of data update, Info source, d

  • 30 fps to 25 fps

    Does anyone know what settings in PPCS4 would give smooth playback when converting 30 fps footage (from Canon 5D MK II) to 25 fps? Every setting I've tried gives jerky output. I also tried the ConvertXtoDVD program, and it works beautifully out of th

  • Data Services 3.2 (Cyricllic Code)

    Hi Folks,                  I am trying to find out a way around this Cyricllic Code                            So i am trying get a short text from the SAP R3 server and pass it on to the Oracle Server. Say for Eg; Short_text - N'0JLRi9C/0YPRgdC6INCy

  • Basic differnce between 000 and 001 clients.

    what is the basic differnce between 000 and 001 clients? why do we use client 000 as source client while client copy?

  • Jitters during RAM preview..

    Hi everyone... I use Adobe After Effects CC. My system config is Issues i come across: 1.  I get Jitters during RAM preview. Specially when i enable ray trace mode.. 2.  Also i get a pop up saying "Ray-Tracing on the GPU an approved NVIDIA graphics c