Widescreen resolutions LOWER than 1680x1050?

I have a MSI Geforce 7600 GS AGP 256mb graphic card and a Samsung 226BW monitor. My problem is, that I can't get any widescreen resolutions that are LOWER than the native 1680x1050. This is a problem, because I don't own the fastest machine (a 3ghz P4), so running games in the native resolution is impossible. Anybody who knows what to do here? Is it my graphic card that just doesn't support these resolutions, or is there something you can do about it?
I have updated my nvidia drivers, without any luck. I also tried to make all resolutions available, but this only gave me widescreen resolutions HIGHER than 1680x1050, which is no good...
Anybody who can help?

Quote from: lars_el on 01-September-07, 04:31:01
I have a MSI Geforce 7600 GS AGP 256mb graphic card and a Samsung 226BW monitor. My problem is, that I can't get any widescreen resolutions that are LOWER than the native 1680x1050. This is a problem, because I don't own the fastest machine (a 3ghz P4), so running games in the native resolution is impossible. Anybody who knows what to do here? Is it my graphic card that just doesn't support these resolutions, or is there something you can do about it?
I have updated my nvidia drivers, without any luck. I also tried to make all resolutions available, but this only gave me widescreen resolutions HIGHER than 1680x1050, which is no good...
Anybody who can help?
7600GS supports widescreen natively.
I think as far as gaming resolution is concern, the game should automatically refer the setting that the game is running.

Similar Messages

  • Xorg.conf: can't configure resolution lower than 1152x864

    Hi,
    I just installed Arch (base system + X11 + XFCE + handful of apps) on five computers in our public library. One of the machines has an ATI graphic card:
    [biblio@mediatheque1:~] $ lspci | grep VGA
    01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200 PRO] (rev 01)
    Every machine has a 17'' flatscreen monitor. Usually, I configure xorg.conf to use a resolution of 1024x768. Some of the users here are older and often visually impaired, and I generally avoid using resolutions higher than this on this type of monitor. But I can't seem to configure it on my ATI card. Ah, yes: I'm using the open source xf86-video-ati driver. And here's the relevant bits from xorg.conf:
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Viewport 0 0
    Depth 24
    Modes "1152x864"
    EndSubSection
    EndSection
    When I specify 1024x768 and restart X, the resolution won't change. So I leave it at that, since when I specify nothing, it looks like it want to default to something even higher, my guess is 1280x1024, which is barely legible on a 17'' monitor.
    I had a similar problem on the other machines, using recent Intel cards. I found a workaround, in that I replaced the recent xf86-video-intel drivers by the older xf86-video-i810 driver. Only the latter seemed to accept the 1024x768 resolution.
    Any suggestions for this?

    I'll answer this myself. After leafing through my logfiles, I found the following solution. Add this line to the Display SubSection:
    Virtual 1024 768
    Last edited by kikinovak (2008-04-15 08:25:27)

  • Continuous tone image resolution lower than specified

    The following message was posted in the incorrect forum; no legitimate solution to the problem was ever posted. I am re-posting it, as this is the same exact problem I am having, right down to the OS and version of Acrobat. Could someone please explain to me what this means and whether or not I should be concerned about it? I will also get two different kinds of results... one is a single number effective ppi on this error, such as 199, (which results in 200ppi if run through PitStop), and a two-number effective ppi, which we haven't been able to decipher, such as 501.357/179.55ppi (which should be a hi-resolution image).
    Help?
    Amy Carolyn Watson
    >
    >
    >Nikola Viereckel - 09:45pm Dec 9, 2007 Pacific
    >
    >Hi - I have recently discovered the above error message when I
    >check my distilled press quality pdf in preflight. I am using
    >a PC and Version 7.0 of distiller and acrobat. The images are
    >300dpi and are in my documents at 100% or lower, so there should
    >be no resolution issues. The pdf itself looks fine, but the
    >preflight does not. I find if I export out of InDesign (CS2)
    >then I do not get the same error message, but this is not my
    >preferred way to create pdfs for print.
    >
    >Any ideas? I the only thoughts I have had is to reinstall
    >the program. Thanking you in advance for your help.
    >Cheers
    >Nikola

    > All text should export as vector, since it's all on a layer above any kind of image.
    Is there any transparency in the text, though? If you float text over
    an image with transparency, it MUST be exported as an image. If it is
    floated over vector art with transparency, it MIGHT.
    It's easy to assume that just because something is on top, it doesn't
    ever need to be flattened. This is not in fact true.
    >
    >I am a little concerned: is this a flaw in the Acrobat Program?
    You mean in its preflight? Unlikely, it isn't rocket science to
    calculate ppi, so the numbers are probably right.
    >
    >Where is this "Continuous tone image resolution" turned on/off? Why is it important?
    That's probably a reference to Distiller settings. I think we've
    established that you aren't using Distiller.
    >
    >Is InDesignCS2 flattening to low transparency settings, even though my settings dictate high?
    You'd probably need to ask in the InDesign forum. But bear in mind
    that the flattener is free to use lower resolution if it thinks that
    is all that is needed for particular effects.
    Maybe you could reopen the PDF in Illustrator, and use that to select
    the images in the flattened page. Might illuminate what is going on.
    Aandi Inston

  • Resolutions Lower Than Expected

    Hi folks.
    I have a friend on an iMac whose resolutions in normal boot mode are very low. It isn't International Access, but the choices on her resolutions are low (1024 x 768 on a 20" iMac).
    I've zapped the PRAM, nothing.
    I've had her boot up in safe mode, and everything goes back to normal (1920 x 1200).
    I can't find the displays preferences in her ~/preferences/ folder.
    Any ideas how to fix this?
    Cheers

    I assume she has set her display resolution at 1920 X 1200 in Systems Preferences after clicking on "Display?"
    virg

  • Big Problem with Directx 11 and Games scaling when lower than native resolution

    Hi Guys,
    MY system is Windows 7 Home Premium (Korean version), and I have dual GPUs, Nvidia Geforce GT 630m for gaming, and Intel HD Graphics 4000 for all other display matters.  My native resolution is 1920 x 1080.
    This problem wasn't there couple of years back, but from 2~3 years ago, when I play recent games that require/favour directx 11 (such as Assassin's Creed IV Black Flag, Batman: Arkham Origins), it seems when I use lower than native resolution (such as 1280
    x 720) and select fullscreen, giant ugly black borders always appear around the game, and the game does not fill the whole screen.  
    I thought this was something which could be fixed in my GPU's control panel, but there was no scale fullscreen option under Nvidia's control panel.  So I went into Intel HD Graphics control panel, but there was no Scale fullscreen option there either (under
    native resolution.  With lower resolution there was).
    Anyway, after months and months of searching, I finally found an Intel forum which was discussing the same situation:
    https://communities.intel.com/thread/44539
    While going through the forum, I found out from other users that problem is not with GPU's drivers, but with Directx 11.  
    To test this theory, I put Batman: Arkham Origins in Force Directx 9 mode, and changed the game resolution to 1280x720.  And the game showed no black borders, it scaled up perfectly to fullscreen under Directx 9 (so no problem whatsoever under directx
    9).  I changed the setting to Directx 11, and the ugly black borders appeared again.
    Could someone please help with this?  I know I can change my screen's resolution every time I play the game, but it's a real nuisance to do that.  And more games are utilising Directx 11 or higher, and I don't think there are many games where I can
    force Directx 9 mode like I did for Arkham Origins.
    Or if someone connected could contact the people working on Directx 11 and ask about this issue (and get them to contact me through my email below), that would be much appreciated.
    my email:
    [email protected]
    p.s. : all my GPU drivers are currently up to date, and the black borders issue is still there

    Hello MeipoXu
    While yes, at first people on the Intel forum thought it was the display driver problem (hence the question was originally posted on the Intel forum).  But if you look closely through the pages especially Pages 2 onwards, there are some very astute
    comments by some posters:
    Update to black borders problem: The problem is DirectX11. Fx. Company of Heroes has a setting "Shader Quality" that when set to ULTRA it will run directX11 and when set below ULTRA it will run directX9. So the intel graphics driver is not
    responsible! It is Microsofts DirectX11 that does it - maybe only to computers with both Intel HD and a second graphics card for video games
    Different workarounds to the black border problem:
    Change resolution before running fullscreen
    Use directX9 instead of directX11
    Fx. in CoH2 there is a setting fx. 50% of resolution, so even in native resolution the graphics is only half and thus faster
    Try window mode without borders
    and here's also another:
    I can confirm that this problem still seems to exist, and that it definitely seems to be related to DirectX 11.
    In a variety of games, turning DirectX11 off (either in-game or using ini files in some games that don't present you with the choice) fixes the issue. But this is obviously not ideal.
    I have a laptop with a native resolution of 1920x1080, but tend to run games at 1280x720 because it provides much better performance on my HD 4400 graphics chip. This bug and the memory leak issue on Windows 8.1 are extremely annoying.
    Like the first poster, my PC has intel HD GPU, and a second graphics card for games (Nvidia).
    And all the members have mentioned that they updated the intel graphics driver, but it does not fix it - so it doesn't seem like a graphics driver problem (and more to do with Directx 11).
    And they are right.  With Batman Arkham Origins, if I set the resolution to 1366 x 768 and apply fullscreen, under Directx 11, ugly black borders appears.  Luckily Arkham Origins has "Force Directx 9 mode" which I use, but a lot of games
    don't have this mode (such as ACIV Black Flag, Watch Dogs, Sleeping Dogs etc) - you either play in ugly black borders, or can't play the game at all.
    And all my Graphics Drivers are currently up-to-date, and issue still exists, so I don't think it's the driver problem.
    I have already tried that registry method you just mentioned.  It didn't work.
    As for Directx 12, well I just hope it works better than Directx 11 (with its ugly black borders in games) does, and works well like Directx9 (with no problem in scaling).

  • Links don't work and Resolution Low

    Hi
    Just made 2 temp pages for my site, published to a folder and used Transmit to FTP upload to my serverspace which is hosted by yahoo.
    The files transfer over but for some reason none of the hyperinks work at all and the resolution of the page is much lower than how it looked in iWeb which was pretty crisp. Anyone experience this problem? I urgently need to get the links working. All help appreciated!
    Thanks
    sven

    I've got a similar problem with links. They work fine on my mac and some pc, even my Palm Treo can access the site's links. But several pc users swear the links don't work. I made a test page with microsoft word and posted on .mac and it's the same problem. Anyone know what could cause this?

  • Satellite A300-1LT PSAGCE - Cant get resolution higher than 1280x800 on external monitor

    I have toshiba Satellite A300-1LT PSAGCE, and I connected additional profeccional monitor LP3065, but I cant get resolution higher than 1280x800, and this only works over HDMI, via VGA output i get only black screen.
    Any suggestions?

    Hi
    As far as I know the internal LCD supports this resolution:
    800x600 16bit/32bit(Clean stretch)
    1024x768 16bit/32bit(Clean stretch)
    1280x800(W) 16bit/32bit
    For _external_ monitor these resolutions are supported:
    800x600 16bit/32bit colors(Depending on CRT)
    1024x768 16bit/32bit colors(Depending on CRT)
    1280x1024 16bit/32bit colors(Depending on CRT)
    1440x900(W) 16bit/32bit colors(Depending on CRT)
    1600x1200 16bit/32bit colors(Depending on CRT)
    1680x1050 16bit/32bit colors(Depending on CRT)
    1920x1200(W) 16bit/32bit colors(Depending on CRT)
    1920x1440 16bit/32bit colors(Depending on CRT)
    2048x1536 16bit/32bit colors(Depending on CRT)
    Note: the vertical refresh rate is also limited to the each resolution:
    800x600 85Hz (Depending on CRT)
    1024x768 85Hz (Depending on CRT)
    1280x1024 85Hz (Depending on CRT)
    1440x900(W) 60Hz (Depending on CRT)
    1600x1200 85Hz (Depending on CRT)
    1680x1050 60Hz (Depending on CRT)
    1920x1200(W) 60Hz (Depending on CRT)
    1920x1440 75Hz(Depending on CRT)
    2048x1536 60Hz(Depending on CRT)

  • GX623 Catalyst Widescreen Resolutions in XP

    Hi again! I solved my Fn sound problem, but there`s another one.. Have XP 32-bit. I modified catalyst drivers (9.8 version, chosed 4600series when downloaded it) with MobilityModder. Driver is working, but widescreen 16:10 resolution I have only ONE and it is native screen 1680x1050, but I want more to choose. I will explain: For this week I was playing Far Cry 2 on vista, but then Vista crashed and I installed XP again. With vista there was more widescreen resolutions, so I played FC2 with 1280x768, but in XP there is no such resolution. How can I get it back, because with native resolution on high settings FPS drops to 15 sometimes, but in 1280x768 resolution - to 30 (integrated benchmark test results). So, how can I add custom resolutions?
    Tried to install drivers from MSI web, but when installation starting - it says that Setup cannot find supported hardware :D
    Emm, sorry for my bad english :(

    Did you install the chipset drivers before the ATI drivers?
    Did you use this driver?
    http://eu.msi.com/index.php?func=driverfile&dno=8153&i=1

  • Windows 7's Infection Rates Five Times Lower Than Windows XP

    "Windows 7's marketshare continues to grow at a steady pace at the expense of its two older siblings, Windows Vista and XP, according to the data from StatCounter. In terms of global usage, Windows XP is at 46.44%, Windows Vista at 12.5%, and Windows 7 at 32.64%. Good news for everyone, right? Well, if these adoption numbers aren't convincing enough, perhaps this might convince you (or your technologically challenged peers) - Windows 7 has the lowest infection rates per quarter amongst Microsoft's currently supported operating systems."
    Complete Article:
    http://www.neowin.net/news/windows-7s-infection-rates-five-times-lower-than-windows-xp
    From Microsoft's Security Intelligence Report here:
    http://download.microsoft.com/download/6/0/5/605BE103-9429-4493-898B-E3D50AB68236/Microsoft_Security...
    ThinkPad: T530 / X1 Gen 2 / Helix - Yoga: Tablet 2 Pro (Win) / Yoga 3 Pro
    If you find a post helpful and it answers your question, please click the "Accept As Solution" button.
    Lenovo Advocate ~ I am not employed by Lenovo or Microsoft. I am a volunteer.
    Microsoft MVP - Consumer Security
    SpywareHammer

    Hmmm hard to say. If I was going to take a stab at it you might be hitting a DC in a remote site. 
    http://blogs.technet.com/b/askpfeplat/archive/2011/12/26/in-search-of-roaming-active-directory-clients-how-to-scriptomatically-identify-missing-active-directory-subnet-definitions.aspx
    A great tool for this, http://blogs.technet.com/b/askpfeplat/archive/2012/06/09/slow-boot-slow-logon-sbsl-a-tool-called-xperf-and-links-you-need-to-read.aspx
    You could also take a look at this. http://blogs.technet.com/b/askpfeplat/archive/2013/03/12/slow-boot-slow-login-sbsl-hotfix-rollup-for-windows-7-and-server-2008-r2-available-today.aspx
    Mark Morowczynski
    Microsoft Senior Platforms PFE
    Blog:
    http://blogs.technet.com/b/askpfeplat  Twitter:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • "The version of the Player that you are trying to install is lower than what is currently installed" when installing 14.0.0.176

    I've been deploying flash updates thru SCCM for a long time using the MSI.  With this update, many computers updated successfully, but about 200+ of them failed.  Each computer I have looked at has the message "Product: Adobe Flash Player 14 ActiveX -- The version of the Player that you are trying to install is lower than what is currently installed." in event viewer.  Attempting a manual install of the MSI produces a similar interactive message.  The current installed version is definitely older than the one I am attempting to install.  I am only able to re-mediate by manually uninstalling, and then installing 14.0.0.176.  I could script and deploy an uninstaller, but I would rather the bug with the MSI be fixed.

    Dear María,
    Finally, I have been able to reproduce the error, both in ActiveX and plugin installers updating from version 15.0.0.246.
    Here you have the logs:
    ACTIVEX
    === Verbose logging started: 18/12/2014  16:12:54  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\WINDOWS\system32\msiexec.exe ===
    MSI (c) (E0:1C) [16:12:54:137]: Resetting cached policy values
    MSI (c) (E0:1C) [16:12:54:137]: Machine policy value 'Debug' is 0
    MSI (c) (E0:1C) [16:12:54:137]: ******* RunEngine:
               ******* Product: install_flash_player_16_active_x.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (E0:1C) [16:12:54:138]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (E0:1C) [16:12:54:138]: Grabbed execution mutex.
    MSI (c) (E0:1C) [16:12:54:155]: Cloaking enabled.
    MSI (c) (E0:1C) [16:12:54:155]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (E0:1C) [16:12:54:158]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (30:E4) [16:12:54:162]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_active_x.msi
    MSI (s) (30:E4) [16:12:54:162]: Grabbed execution mutex.
    MSI (s) (30:4C) [16:12:54:163]: Resetting cached policy values
    MSI (s) (30:4C) [16:12:54:163]: Machine policy value 'Debug' is 0
    MSI (s) (30:4C) [16:12:54:163]: ******* RunEngine:
               ******* Product: C:\WINDOWS\system32\install_flash_player_16_active_x.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (30:4C) [16:12:54:163]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_active_x.msi 3: -2147287038
    MSI (s) (30:4C) [16:12:54:164]: MainEngineThread is returning 2
    MSI (s) (30:E4) [16:12:54:177]: User policy value 'DisableRollback' is 0
    MSI (s) (30:E4) [16:12:54:178]: Machine policy value 'DisableRollback' is 0
    MSI (s) (30:E4) [16:12:54:178]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (30:E4) [16:12:54:178]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (30:E4) [16:12:54:178]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (30:E4) [16:12:54:178]: Restoring environment variables
    MSI (c) (E0:1C) [16:12:54:188]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (E0:1C) [16:12:54:188]: MainEngineThread is returning 2
    === Verbose logging stopped: 18/12/2014  16:12:54 ===
    PLUGIN
    === Verbose logging started: 18/12/2014  16:15:40  Build type: SHIP UNICODE 5.00.7601.00  Calling process: C:\WINDOWS\system32\msiexec.exe ===
    MSI (c) (28:44) [16:15:40:364]: Resetting cached policy values
    MSI (c) (28:44) [16:15:40:364]: Machine policy value 'Debug' is 0
    MSI (c) (28:44) [16:15:40:364]: ******* RunEngine:
               ******* Product: install_flash_player_16_plugin.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (c) (28:44) [16:15:40:364]: Client-side and UI is none or basic: Running entire install on the server.
    MSI (c) (28:44) [16:15:40:364]: Grabbed execution mutex.
    MSI (c) (28:44) [16:15:40:384]: Cloaking enabled.
    MSI (c) (28:44) [16:15:40:384]: Attempting to enable all disabled privileges before calling Install on Server
    MSI (c) (28:44) [16:15:40:384]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (30:2C) [16:15:40:384]: Running installation inside multi-package transaction C:\WINDOWS\system32\install_flash_player_16_plugin.msi
    MSI (s) (30:2C) [16:15:40:384]: Grabbed execution mutex.
    MSI (s) (30:3C) [16:15:40:384]: Resetting cached policy values
    MSI (s) (30:3C) [16:15:40:384]: Machine policy value 'Debug' is 0
    MSI (s) (30:3C) [16:15:40:384]: ******* RunEngine:
               ******* Product: C:\WINDOWS\system32\install_flash_player_16_plugin.msi
               ******* Action:
               ******* CommandLine: **********
    MSI (s) (30:3C) [16:15:40:384]: Note: 1: 2203 2: C:\WINDOWS\system32\install_flash_player_16_plugin.msi 3: -2147287038
    MSI (s) (30:3C) [16:15:40:384]: MainEngineThread is returning 2
    MSI (s) (30:2C) [16:15:40:404]: User policy value 'DisableRollback' is 0
    MSI (s) (30:2C) [16:15:40:404]: Machine policy value 'DisableRollback' is 0
    MSI (s) (30:2C) [16:15:40:404]: Incrementing counter to disable shutdown. Counter after increment: 0
    MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\Rollback\Scripts 3: 2
    MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (30:2C) [16:15:40:404]: Note: 1: 1402 2: HKEY_LOCAL_MACHINE\Software\Microsoft\Windows\CurrentVersion\Installer\InProgress 3: 2
    MSI (s) (30:2C) [16:15:40:404]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (s) (30:2C) [16:15:40:404]: Restoring environment variables
    MSI (c) (28:44) [16:15:40:414]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied.  Counter after decrement: -1
    MSI (c) (28:44) [16:15:40:414]: MainEngineThread is returning 2
    === Verbose logging stopped: 18/12/2014  16:15:40 ===

  • ERROR: You entered a number which is lower than or equal to the package....

    Hi ,
    I'm doing PREPARE for the upgrade to ECC60 from SAP 4.7 R1, but I have the following error in the phase of including patch.
    Any idea ?
    ERROR
    SAPup> Do you want to search for new packages in directory
    sappino\sapmnt\trans\EPS\in" first?
           Because of errors during package extraction, "Search" is recommended.
                - "Search"
                - "Skip"
    Enter one of these options [Search] :=
    uploading data ...
    Please select the Support Packages to include:
                                    Support Package Level
    Component             min        equi       current    select  
    [9]
    SAP_ABA              <none>     <none>     0009      0009
    [9]
    SAP_BASIS            <none>     <none>     0009      0009
    [9]
    PI_BASIS             <none>     <none>     0009      0009
    [5]
    ST-PI                <none>     0005       0002      0005
    [9]
    SAP_BW               <none>     <none>     0009      0009
    [6]
    SAP_AP               <none>     <none>     0006      0006
    [7]
    SAP_HR               <none>     <none>     0007      0007
    [6]
    SAP_APPL             <none>     <none>     0006      0006
    [6]
    EA-IPPE              <none>     <none>     0006      0006
    [6]
    EA-FINSERV           <none>     <none>     0006      0006
    [6]
    EA-GLTRADE           <none>     <none>     0006      0006
    [7]
    EA-HR                <none>     <none>     0007      0007
    [6]
    EA-PS                <none>     <none>     0006      0006
    [6]
    EA-RETAIL            <none>     <none>     0006      0006
    [6]
    EA-DFPS              <none>     <none>     0006      0006
    [6]
    EA-APPL              <none>     <none>     0006      0006
    [6]
    FINBASIS             <none>     <none>     0006      0006
    [6]
    ERECRUIT             <none>     <none>     0006      0006
    [6]
    SEM-BW               <none>     <none>     0006      0006
    [6]
    LSOFE                <none>     <none>     0006      0006
          SAPup message
    SAPup> ERROR: You entered a number which is lower than or equal to the
                  package level which is integrated in this upgrade.
                  SAP_ABA - package level (9) too low (integrated package level 9).
                  SAP_BASIS - package level (9) too low (integrated package level 9).
                  PI_BASIS - package level (9) too low (integrated package level 9).
                  ST-PI - package level (2) too low (integrated package level 2).
                  SAP_BW - package level (9) too low (integrated package level 9).
                  SAP_AP - package level (6) too low (integrated package level 6).
                  SAP_HR - package level (7) too low (integrated package level 7).
                  SAP_APPL - package level (6) too low (integrated package level 6).
                  EA-IPPE - package level (6) too low (integrated package level 6).
                  EA-FINSERV - package level (6) too low (integrated package level 6).
                  EA-GLTRADE - package level (6) too low (integrated package level 6).
                  EA-HR - package level (7) too low (integrated package level 7).
                  EA-PS - package level (6) too low (integrated package level 6).
                  EA-RETAIL - package level (6) too low (integrated package level 6).
                  EA-DFPS - package level (6) too low (integrated package level 6).
                  EA-APPL - package level (6) too low (integrated package level 6).
                  FINBASIS - package level (6) too low (integrated package level 6).
                  ERECRUIT - package level (6) too low (integrated package level 6).
                  SEM-BW - package level (6) too low (integrated package level 6).
                  LSOFE - package level (6) too low (integrated package level 6).
                - "continue"
                - "cancel"
    Enter one of these options [continue] :=
    Thank's.

    Yes - you have to download them and put them into the directory-  that´s the purpose of this phase
    Markus

  • When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I t

    When I have headphones plugged into my iphone it says warning'' high volume'' and becomes first a red and then plop a number of red pops but it will not be so for someone else I know. My sound will be much lower than anyone else in the music, and when I talk by phone headset

    Hi! I have the same problem when I use my headphones .
    iPhone 4s England, iOS 6.1.2

  • Down payment amount cannot be higher/lower than the preset value Error

    Hello.  Can anyone help me with this error.  When creating a down payment request from a sales order with a billing plan, I get the message 'Down payment amount cannot be higher/lower than the preset value' and the document isn't released to accounting.  When creating the sales order, I included a condition type that I created.  The billing plan then calculates the down payment request value with the total sum i.e net value plus condition value.  Upon creating the down payment request in VF01, I get this message.  I did a test and noticed that, if the condition is not included in the sales order, the down payment request is created without errors.  How do I correct this?  Thanks for you anticipated response.

    Hi
    As you are getting error, 'Down payment amount cannot be higher/lower than the preset value' ,please check the total value of the document.So in the sales document ,billing plan check what is the invoice value for the first billing date , also check what is the sales order value.Secondly what is the condition type that has been created and for what purpose it is being used.
    Regards
    Srinath

  • Any song with a bitrate lower than 96kbps is "Ineligible"

    But my problem is, I have some about 950 episodes of speech radio series and allmost 70% is bittrate lower than 96kbps and some about 150 lessons of French language also in bitrate lower than 96kbps. I cann't upload these files to iCloud. Convert it to higher bitrate looks very stupid. Any suggestion?

    The generally accepted work-around is to to make an AAC copy within iTunes.   If you wanted to use a third party solution to make MP3 files that comply with the minimum bitrate, you could do that instead.  I imagine the benefit to MP3 would be smaller files.

  • Why is the Lumia Icon's ringtone lower than when previewing the ringtone in settings/system/ringtone sounds? (The volume is set at 30 in all cases.)

    Why is the Lumia Icon's (929) ringtone lower than when previewing the ringtone in settings/system/ringtone+sounds? (The volume is set at 30 in all cases.)

    Hello Lena,
    Yes, tried all those things.
    After going back and forth with Verizon's "tier 2" technical support over the last 2 days, a chat session with Nokia, no call-backs-as-promised by your technicians, then having them reinstall the phone's software -that didn't fix the problem. So they are sending me a re-manufactured replacement phone. But not a NEW ONE, because I didn't realize the problem within 14 days. You see at first, I just figured the phone had lousy volume, until I was previewing ringtones when setting the alarm clock. The phone is about one and a half months old. I have expressed my desire that a NEW phone be sent, but NO says Verizon.
    I've spent enough time, in good faith, Verizon would solve this matter, but in the process of their re-installing the software they've screwed up Backup Assistant.
    Thanks.

Maybe you are looking for

  • When I boot up it hangs on the login screen for awhile, why?

    I have a mid 2011 Macbook Air 13".  It came with Lion but I recently updated to Mountain Lion.  When I wake the laptop from sleep everything is fine.  If it's been awhile since it slept (a couple of hours), the login screen hangs.  What happens is th

  • Blank screen after update (KMS related?)

    After the last kernel update I got a blank screen at boot. I'm not sure, but I think it happens when KMS kicks in. I think it's related to a broken EDID I've been fighting for months. The stop-gap measure I'd been using so far is to have a custom con

  • ITunes 9.2 and Windows 7 Install problem

    I've posted a problem here already, but now I'm on the actual machine. I removed all the Apple software to include removing iTunes 9.1.1.12 I rebooted the machine (running Windows 7 Ultimate) Download a fresh copy of iTunes 9.2 and it installs up to

  • Lotus mail integration with WebCenter Services 11g

    Hi, I'm looking for documentation to integrate Lotus Domino 8.5 into Webcenter. I cann't find the WebCenter Social Computing Services 11g Technical White Paper which I hope can be helpful. Any help on this topic is highly appreciated. Regards, DeeJay

  • How to work volume limit

    How to work the volume limit