Widescreen setting in video - tv out has no effect

after a couple of hours of experimentation, i have concluded that the widescreen setting (on/off) in the tv out section of the video settings has no effect. i believe what it SHOULD do is adjust the signal to display properly on a widescreen (16x9) tv. i believe it does nothing. video displays stretched and squashed (photos too btw). this is after experimenting with the same itunes-purchased and non-itunes purchased videos on both my ipad and my iphone 3gs, using the same tv and the apple component av cable. the iphone works fine. the only way to get a semi-acceptable display on the tv with the ipad is to the set to tv to normal 4x3 display. (late model sony lcd hdtv). then you get thick black bars around the picture. with the iphone i can leave the tv display setting at it's regular "full" option and the picture fills the screen properly. i tried both sd and hd videos on the ipad. (sd only on the iphone obviously). does anyone else have this issue? is there a bug in the ipad software? is there a problem with MY ipad? will a software restore help?
Message was edited by: Michael Rosenberg

i tried a fair amount of stuff. here's 2 examples:
1) itunes store copy of an episode of the office in both hd and sd.
2) digital copy of the new star trek movie
so the first is 16x9 and the second is a widescreen movie 2.35-1.
both look fine when playing back off the iphone 3gs (sd copy of the office). both looked stretched horizontally and squashed vertically when playing off the ipad. note that everything looks fine on the ipad itself. it just messed up when connecting
the ipad to my tv. in all cases, the widescreen setting in the tv out section of the video panel on the ipad has NO effect.
i can change the screen settings ON THE TV to fix the distortion but then i end up with thick black bars on all 4 sides. and i don't need to do this with the iphone 3gs. i continue to believe something is wrong with the ipad (or MY ipad).

Similar Messages

Iphone setting for video composite out

How can I set my Iphone in order to see composite video out; for beamer or for LCD TV

composite and component don't support mirror so they will only display output when the app being used support it
got both a composite and component cable for my ios6 iphone4 and they work great

I have CC and while attempting Light Effects, the Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Ple

I have CC and while attempting Light Effects, the Light Effects Layer will appear in the layers panel, but the option bar will not appear and neither will the Properties panel. All my preferences are set correct, and my computer has a compatible video card and RAM. Please help!
I tried to delete the layer attempt again. I am in a Photoshop class, but the work is all online, so all my teacher is going to do is send me to this site. I am trying to edit a photo for this class, and without this working, i go to filter>render>light effects. the bar and panel will pop up for about 2 seconds, then disappear. How do i get the options bar and properties panel to display?

I was about to suggest resetting LE from the Workspace drop-down top right corner, but if you can't see the Options Bar, I guess that is not going to happen. The normal Tool reset is grey out for LE, so it might be a case of resetting Preferences.
Reset Preferences
Windows — Hold down Shift Ctrl Alt immediately after starting Photoshop
Mac — Hold down Shift Cmd Opt immediately after starting Photoshop

Set desired in and out of audio video in menu...

Sorry - so basic but can't figure out - how do I set the in and out point for audio playing during the menu and the video that is being viewed in the menu? Thanks!

You mean using Motion eus? Look Motion Menu up in the manual for the details. It's not intutive. You select the button and then open the inspector and you will see a media tab where you can set the in point. You cannot select the outpoint since Motion Menus are 30 seconds by default. Adjusting the loop point for the entire menu is described, confusingly, in the manual.
bogiesan

HT2508 My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB

My amp has an USB input but when I attach my mac pro to it, and set the input to the USB setting, no sound comes out. I looked at the system settings, but none of them produce a different outcome. How can I send the music through the USB out to USB in?

AFAIK cameras offer their own built-in format utility for inserted SD cards. You should use that. Otherwise, refer to the manual that came with your camera to determine precisely how your SD cards need to be formatted to work properly. Personally, I'd suggest Partition Scheme: MBR, and Filesystem: FAT32.
Try to limit the number of formats you perform on the SD cards, though, as you're reducing their lifespan. I believe formatting causes re-writes to a portion of the SD card that has fewer read/write cycles than the rest of the card as a whole.

Video stutters when setting range in and out points within browser

While playing back video and using the "I" and "O" keys to set range in and out points, the video stutters every time I press either key.
Footage is Apple ProRes 422 1080p23.98 and 720p59.94 (problem is more noticeable with 59.94 footage). Playback quality is set to "Better Performance"
FCPX 10.1.3
OSX 10.9.5
Mac Pro (Late 2013)
3 GHz 8-Core
32GB RAM
Dual AMD FirePro D700
Project stored on 7200rpm eSata drive via GbE

Yes that's exactly right. As I'm going through selecting ranges to mark with a keyword tag, the video pauses for a split second (and skips a few frames) every time I use the "I" or "O" keys. As I tend to tag multiple sections within each clip I like to mark my ranges and tag them on the fly while the clip is still playing.

Why do my audio and video get out of synch?

No matter what sort of video I'm trying to play: Youtube, a movie on DVD, a movie on an external hard drive, etc, after a short time the audio and video get out of synch with each other. This is often, though not always, signaled by a short audio phrase being repeated (eg: "I don't know, Scully, how about you? about you?"). I can solve the problem by quitting the app and starting it back up but it will eventually screw up again.
I'm using a MacBook running OS 10.6.8 with a 2.26 GHz Intel Core 2 Duo processor and 4 GB 1067 MHz DDR3 memory.

MASMAS
The first thing that we need to know are the properties of what you are putting on the Timeline. What works in another software does not necessarily work in Premiere Elements. Each program has its own supported formats.
a. What is the file extension for this file? .MOV or .MP4?
b. Does the iPad describe it as 1080p or 720p?
c. If you open Premiere Elements 12 and go to Edit Menu/Project Settings/General, what do you see for Editing Mode, Timebase, Frame Size, and Pixel Aspect Ratio, even if those field appear to be grayed out.
Two immediate troubleshooting avenues are going to be in the direction of...
a. Project settings not set up to match the properties of the source from the iPad. Then we would start a new project and set the project setting manually before importing your video. Details for manually setting the project preset are in the following.
ATR Premiere Elements Troubleshooting: PE11: Accuracy of Automatic Project Preset (New Project Dialog) Setting
b. The iPad video being recorded with a variable frame rate instead of a constant one...the remedy then would probably be to take your video in a program like HandBrake to change the variable to a constant frame rate. And after that, import the corrected video into the Premiere Elements project which has the correct project preset (preferably set manual to assure the correct result).
Please see what you can put together in the way of video details, and we will sort this out.
Thanks.
ATR

Why is my video exporting out of sync with the audio?

Every time I export it (and it takes some 2 hours just to export a draft version) the video is sped up, but the audio isn't, so that the video is out of sync and at the end there's just black space with the end of the audio.
Both the video footage and the composition have the same frame rate (24p). I am exporting with Render Settings set to DV settings and output module set to Quicktime DV NTSC 48kHz
When I edit it I've been timing it to the seconds and frames because it's such a large file that I can barely RAM preview 5 seconds of it, and so it's especially frustrating that it's completely off when it exports.
Has this ever happened to anyone here?

Ahhh, right.
I'm using After Effects CS5.
The footage I'm using is in .mov format, although to be honest I'm not sure about the codec (I imported it straight to After Effects from my Canon 7D's memory card? I think it's H.264)
I also have some PNG sequences.
I used the AE Render Queue.
The computer I'm using runs OSX.
Processor Name:
Quad-Core Intel Xeon
Processor Speed:
2.8 GHz
Number Of Processors:
2
Total Number Of Cores:
8
L2 Cache (per processor):
12 MB
Memory:
4 GB
Bus Speed:
1.6 GHz

Audio and Video are Out of Sync

Hello,
This seems to be a reoccurring problem for me and I'd love some help getting it resolved once and for all. After capturing footage, the audio and video are out of sync in the clip AND when I drag it to the timeline. When I go through each part, it looks like the video hesitates often, which seems to be causing the misalignment of audio. But, once it is moved into alignment, it goes out of sync again throughout the remainder of the one hour video.
I'm capturing through a Canon Optura 50 Mini DV and editing with FCP 6.0.1. I have checked that the audio mode is set to 16 bit on the camera, and the capture settings have the audio rate for 48 KHz.
This same problem occurred when I was capturing another event last week.
PLEASE advise. It won't get aligned even if I take the hours and hours to move the audio left and right frame by frame.

I am still wondering why you're recommending that I use an external drive for this project.
Because the internal has more than enough to do running Mac OS X and the applications. It is constantly writing files. While DV video is at the lower end of the scale, it is still asking a lot of the drive's read and write head.
I always used external drives, but we had many problems with delays and processing problems.
At the very least, you should be using FireWire external drives. USB is no good for video as it delivers data in packets, not the sustained stream that video needs. The drives must also be formatted as Mac OS Extended. Windows FAT 16 of FAT 32 formatted drives have file size limits of 2 and 4 GB respectively. Anything larger is segemented and can cause problems on a Mac.

My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

My video playback out...every video shakes/flashes/doesn't play right. What's wrong? I thought the hard drive was too full, but I just deleted 125gigs, rebooted and it still flashes and doesn't play videos. This is true for youtube, ads, foxnews videos...

Update: The iBook can play any 480p video and higher if I encode them with DivX and in AVI format. But of course this is not compatible with my iPhone 4. At least I can shrink my library now and get away from the full MPEG-2s. I don't get why I can't use Apple's h264 though. There has to be a setting I am missing. The sample Apple h264 videos from the days of Tiger worked flawlessly on my iBook when it was new so the CPU must be capable of decoding it. I really can't understand this.
Also, since I made my videos in English for my family, I had to create soft subtitles for my wife's Chinese family, and I can't get players like QT with perian or MPlayerX to sync them properly to an AVI encoded with DivX, they only sync well with the iPhone 4 m4v/mp4 formatted files I made. This is a real pickle.
So now I may need three or four copies of each video, LOL. I need to hardcode the subtitles if I want to use AVI to playback on older machines, and keep the mp4 file for the iDevices too, while keeping higher quality h264 videos for my American relatives...
If h264 is compatible with my iBook, what is the proper encoding settings? Must I dramatically lower the settings or frame rate? I can settle on 2 copies of each video that way. One iBook/G4/eMac compatible video that syncs correctly with my srt soft subs, and another version that works well with my iPhone 4 and iPad.
All in all, I will end up with more than 3 or 4 version of each video. On my late G5 dual core I have the full 720-1080p uncompressed master files. On my i5 iMac I have the h264 compressed versions for distribution, and lower versions for my iDevices. Now I need to keep either full MPEG-2 files for the iBook to play, or convert to older formats like DivX AVI for our family's legacy machines. I am running out of hard disk space quick now, LOL.
Is there an easier way?

Mac mini mid 2011 video blinking out too

As the 2012 mac mini, my mac mini mid 2011 with the 3000 graphics chipset, has video blinking out every hour for about a second, since I upgraded from an ancient cinema display (1600x1040) to a DELL U2713HM 2560x1440 pixels. The old display blinked very rarely too, which I thought to be dips in the grid. The new display blacks out every hour for 1-2 seconds. And when the machine is heavily loaded (xcode indexing 500 files): about every minute.
It is becoming really acute since I updated to OS X 10.8.5 (12F37), and even WORSE and UNWORKABLE: when the video now blinks the monitor enters power save mode, and I need to switch off and on the monitor to wake up video...
Thunderbolt Bus:
Vendor Name:    Apple Inc.
Device Name:    Mac mini
UID:    0x0001000C170B0D00
Firmware Version:    25.1
Port:
Status:    No device connected
Link Status:    0x100
Port Micro Firmware Version:    2.1.3
I connected the display via a mini-displayport to displayport cable (the DELL has a displayport port too), but I don't think that is relevant. I don't have that ridiculously overpriced dual-link DVI converter.
Filed a bug at Apple, submitted some system reports when the prob occurred. I hope they will release a firmware fix, or I'll take the mini back to the shop.

Hi Rick, I'd see if it's reated to this, which has many symptoms...
Try this: "sudo pmset autopoweroff 0" and "sudo pmset standby 0"
http://xlr8yourmac.com/archives/sep13/091313.html#10.8.5SleepEjectTip

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. My question is, is this noise remover is separate from the cs6 or I need to get this software downloa

I'm a new user and learning, I bought and installed Premiere Pro cs6. I got a nice video clip but has a baby cried in the background and very annoying. I have tried all of the sounds in Prem cs6 but didn't work. My question is, do I need to get a separate sound software download and install to be able to use it?

In the CS versions, there was some audio capability in PrPro but you needed to get a separate audio program for major work. Lessening a baby definitely qualifies as major work. That's lessening, i dont mean eliminating. Adobe's audio program is Audition. There are others "out there'. In the CC versions one just downloads Audution also.
Neil

Transferring from the camcorder using S-Video IN/OUT port possible?

My DV port on my Panasonic NV-GS70 camcorder broke and thus I can't use the firewire cable anymore to transfer video on my Mac.
Repairing the port doesn't seems a viable inexpensive option. (Based on what I read on the Web.)
Now, the camcorder also has a S-Video IN/OUT port.
My questions:
- Is it actually possible to use this port to transfer video to a MAC?
- If so, what kind of cable do I need?
I read about USB A/V capture device (such as this one: http://www.pinecomputer.com/dduusb20veca.html) but didn't manage to find one specifically for MAC.
Any help would be greatly appreciated!
Thank you.

The Eyetv Hybrid from El Gato will do this, and it will export to old versions of iMovie. However, I did a test on analog 8mm passed through an 8mm digital 8.
I tried both dv and s-video. Unfortunately the s-video would only import in black and white. I suspect this was due to the analog conversion, but I did not go back and test running digital dv through the s-video.
Of course, the same test through FireWire in dv was in full color. Just take that as a datapoint. It could just be my camera.
In your case, I would recommend that you monitor eBay and pick up a used dv camcorder.

HT4108 What is required to use the video composite out on the iPhone 4. Left and right audio works ok

What is required to use the video composite out on the iPhone 4 The left and right audio works ok

Please not that the iPhone uses mono channel for internal speakers, the other path that you see is not the speaker per say. It is the phone microphone. Try using headphones, you will hear both channels. If the problem still persists when using headphones, check your sound balancing in the settings. Go to setting-general-accessibility scroll down and check the slide under mono audio. It should be put at the centre for you to hear both channels ON YOUR HEADPHONES

Video & Audio out of sync after update

Ever since I updated my MacBook Pro to OS X Yosemite v10.10 last week, all videos are out of sync with the audio. It wasn't just on Safari while playing YouTube videos or DailyMotion videos, but also when playing videos files on my computer. For short videos, the audio is just a second ahead or behind the video, but for long films it can be minutes apart.
Does anyone else have this problem? Can anyone tell me what caused this and how can it be solved? Thanks so much!!!

I have the same issue and it started 3 days ago. This happens with anything I'm watching, netflix, huluplus, youtube, crackle, anything that has audio and video. The biggest issue is that it's also affecting iMovie and Final Cut pro X. This is a MAJOR issue given that I make a living editing video. I hope somebody can find a solution for this issue.

Widescreen setting in video - tv out has no effect

Similar Messages

Maybe you are looking for