Widescreen w. DVI from Mac-Mini ?

I bought a new monitor (Philips 200W6CS) with 1680*1050 pixels , to replace a Belinea with 1200*1000 pix.
When connected to the mac mini it gave a very clear picture but only for only 5 minutes, ending in sleep-mode, or "no signal".
The same DVI-cable then still gives signal to other DVI-monitor,
The new 200W6CS does only work stable on VGA with same but less sharp 1680*1050 pix, .... and still with DVI from PC's.
The OS here is 10.3.7..
The video from mac-mini should support 1900*1200 pix...
What is wrong ??, and how to fix ??
mac mini, windows PC   Mac OS X (10.3.7)   Philips 200W6CS

I suspect if you dug into the details of the video timing for 1680 x 1050 you would find the dot clock is above 135 MHz. The mini is not stable above that level with certain DVI receivers. Probably you will have to use a program like DisplayConfigX or SwitchRes X to lower the pixel clock below 135. Here is a thread that may help.
http://discussions.apple.com/message.jspa?messageID=1707980#1707980

Similar Messages

  • Can I install OS 10.4 DVD on G3 B&W (CD-ROM only) from Mac Mini with DVD?

    I have G3 B&W 400Mhz 384Mb memory 9Gb hard drive.
    It has CD-ROM, Zip Drive, Firewire, USB & Ethernet and currenty running on OS 10.2.
    I'd like to upgrade to OS 10.4, but it's on DVD.
    I also own Mac Mini G4 with DVD-RW, and I can connect it to G3 with Firewire using Target Drive Mode. G3 recognize Mac Mini as a hard drive.
    Can I install OS 10.4 from Mac Mini? Thank you for your help!

    zakuro7 wrote:
    Can I install OS 10.4 from Mac Mini?
    If you mean the 10.4 DVD is a full-retail copy for any machine, not the version that came with the Mac mini.
    BDAqua wrote:
    ...put the Mini in Target Mode...
    some additional info on Target Mode
    http://support.apple.com/kb/HT1661

  • Apple TV has no sound when mirroring from Mac mini,sound works when mirroring from iPad and iPhone

    When I mirror from Mac mini to Apple TV there's no audio from Apple TV to my av amp,it works fine from iPhone and iPad,is there something I need to do in the airplay settings?

    Here's what finally solved my issue:
    https://discussions.apple.com/message/24436903#24436903
    From this Apple Community User:
    https://discussions.apple.com/people/Winston%20Churchill
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router. (Also try removing it’s power cord for at least 30 seconds)
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)
    Apparently there is an issue if you push the Apple Remote before you set your computer to mirror.  Whatever I did, it had locked it in that state.  Once I stopped mirroring, then went onto the TV screen and restarted the Apple TV (#1 above) it then allowed me to choose mirroring on my Mac and the audio automatically switched from the computer to the TV (making the computer now mute), BTW the volume needs to be maxed on the computer as that will transmit to the TV if your volume is low on the computer.  Then you can raise or lower it the way you want on your TV.
    Yay!
    Hope this helps others.....

  • Hi guys. gota 2010 mac mini but want to upgrade so i can stream from mac mini to apple tv. but some herd some bad reviews about os x moutain lion. any of it true?? to mountain lion

    hi guys. gota 2010 mac mini but want to upgrade so i can stream from mac mini to apple tv. but some herd some bad reviews about os x moutain lion. any of it true?

    Mountain Lion is the best OS yet, IMHO.

  • Why wireless apple keyboard keep disconnected from mac mini?

    Why is my brand new wireless apple keyboard keep disconnected every 5 to 10 minutes from mac mini? the keyboard's battery is 100% full, and the bluetooth connection seems fine. I'm running 10.8.2. Please help...

    Hi Barry,
    You seem to have solutions ?
    Do you know why iPhone 5 could not be paired by Bluetooth
    with MacBook Pro  Snow Leopard  10.6.8 ?

  • From mac mini 120 Go to mac mini 500 Go ?

    How can I transfer all my data from mac mini 120 Go to mac mini 500 Go ?

    Hello,
    The likely best way would be to put the older one into Target mode...
    http://support.apple.com/kb/HT1661
    Then use Migration Assistant to migrate all your data & settings over.

  • Moving from mac mini to iMac with my backups

    i'm waiting for my iMac and i will use migration assistent to get my account from Mac mini
    but how can i bring my time machine backups on the new iMac, i need to restore older version of some code files
    Is it possible?
    can i do it even moving it to a new external drive?

    Purchase Aperture and use it to fix the links that break when you move the library (assuming that you have the latest iPhoto) or purchae iPhoto Library Manager - http://www.fatcatsoftware.com/iplm/ -  and use it to rebuild a managed library
    One of the many reasons that referenced libraries are not currently recommended with iPhoto is its inability to handle a change in the path to the photos
    LN

  • Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

    Can I move my iWeb from mac-mini to my new macbook pro ? iLife 11 does not have iWeb and I really want to use it to update my website on my new macbook Pro instead of Mac mini

    There is no license required for iWeb.  Just do a Wyodor suggested and you'll be ready to go. If you're running Lion however, consider the following:
    In Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    To open your domain file in Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
    do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
    tell application "iWeb" to activate
    You can download an already compiled version with this link: iWeb Switch Domain.
    Just launch the application, find and select the domain file you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
    WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
    OT

  • How to transfer photos/film from Mac mini to memory stick

    mac mini late 2012 processor 2.3 Ghz intel core 7
    memory 8 Gb
    software OS X maverick
    Can somebody tell me how to traNSFER PHOTOS AND MOVIES FROM  MAC MINI TO SD OR MEMORY STICK?
    Thank You
    <E-mail Edited by Host>

    Drag them there.
    (112861)

  • How do i move files from mac mini to external hard drive

    how do i move files from mac mini to external hard drive

    The simplest method would be to drag & drop the files you want to move to the external drive using the Finder. Just open both the source and destination locations in separate Finder windows.

  • HT4889 Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it show up in the new Mac's computer folder. Help

    Trying to migrate from Mac-mini Tiger to Mac-mini Lion and Migration Assistant cannot find my Firewire, 400 to 800, "T" disk although it shows up in the new Mac's computer folder. It seems that Mac-mini Tiger is as it should be and the firewire cable is OK.  Something about the Migration Assistant is being missed, but I have no idea what it is.
    Help

    Addendum: I read on a post here (http://forums.macrumors.com/showthread.php?t=420169) about removing some kext files in order to trick OSX into thinking that there were no FireWire ports.
    I followed the instructions and removed from /System/Library/Extensions/ the following files:
    IOFireWireSerialBusProtocolTransport.kext
    IOFireWireAVC.kext
    IOFireWireFamily.kext
    IOFireWireIP.kext
    IOFireWireSBP2.kext
    I restarted and BAM...Snow Leopard booted crazy fast and the mouse and keyboard worked instantly.
    The System Profiler says "No FireWire ports were found."
    So this tells me that the FW port is probably the culprit and is messing up the installation.
    So how do I hack the Mountain Lion installer and tell it to ignore the FW port, which is obviously quite dead? Or is there something I can do to the Base system that is similar?

  • How do I restore NOTES that were deleted during an itunes sync from Mac mini to iphone 5?

    How do I restore NOTES that were deleted during an itunes sync from Mac mini to iPhone 5?

    I should mention that my notes were not being sent to icloud, my mac's time machine was not set up, and my latest back-up was 3 months ago.
    I know, I know, very silly on my part. I've changed all this going forward...

  • How to transfer pages file from mac mini to iphone

    how to transfer pages file from mac mini to iphone

    If you have OSX 10.8 (Mountain Lion) installed on your Mac mini, set-up iCloud in your System preferences.
    Peter

  • No signal using DVI cable from mac mini

    I have the dell 2007wfp monitor and I can't use the DVI cable I get the message No signal coming from your computer. then the display goes to sleep.
    It works OK with the DVI to VGA but everything is stretched and peoples faces look weird.
    I have a mac mini 1.66 dual core with 2 gigs ram and 667 mhz DDR2 SDRAM.
    The monitors max res is 1680x1050.
    Any thoughts?

    +Could it be that some monitors are harder on the video card/cpu?+
    Yes, in a manner of speaking. In fact, Apple says as much. Some displays are "coherent" and some are "non-coherent" and they get treated differently by the mini. It says so on this Apple spec page for the mini in the second column under "Graphics and video support".
    http://www.apple.com/macmini/specs.html
    Of course the problem is how do you know which you have, a coherent display or a non-coherent display? Answer: you don't until you get your new mini or new display home and discover the two don't play together.

  • Audio output from Mac mini 2009

    I have a 2009 Mac mini with mini dvi and mini display port outputs. Just bought an hdmi tv to use as the display. I understand audio is not supported out of the mini DVI, but what about the mini display port? I was thinking of using a mini display port to hdmi cable. Trying to avoid an additional cable for audio.

    There are two 2009 Mac mini models, Early 2009 and Late 2009. I can tell you for sure that the Early '09 Mac mini does not have integrated audio from the mini-DIsplayPort. It was my understanding that the Late '09 Mac minis built in 2009 also did not have integrated audio, but those made in early 2010 did. The only way to know for sure would be to test it. Apple reports that some m-DP adapters are not adhering to the VESA standard and even Macs with integrated audio in the m-DP do not with these poorly made adapters. Apple is only recommending the Moshi and Griffin adapters.
    http://support.apple.com/kb/ts3065
    If your mini does not have integrated audio you can get a cool adapter that will solve that issue from Monoprice;
    http://www.monoprice.com/products/product.asp?cid=104&cp_id=10428&cs_id=1042802&pid=6331&seq=1&format=2
    Dah•veed

Maybe you are looking for

  • Error in BI Content 7.03 Import

    Hi, i have installed BW 7.0 in unix machine. I am getting the follwoing error during BI content 7.03 import. Pls let me know whether , i have to import BI-content 7.01 before or i can import BI 7.03 directly I am facing error in XTA_put execution <b>

  • Issue regarding cell action in webdynpro for abap alv

    hello gurus,        i have one requirement in webdynpro for abap alv.i have one alv table in that i have one coloun employee name. for that i have provided F4 help and that is editable field.if i select value from F4 help it is getting value correctl

  • What do I need to hook up to RCA Audio-out?

    Hi, I'm trying to connect the school's iBook to an RCA cable so we can have sound for our assemblies without having to hold a mic to the iBook's speakers. What would people advise I use?

  • Ios8 lack of sufficient space

    Three out of four of my ios devices will not allow the ios8 update due to lack of sufficient space.  I am confused on how much space is required.  The update appears to require 957MB and I have 4.2 GB available.  Something doesn't make sense.  Then i

  • About HRMS & Report ???

    Hi all I want to know how to (add) or linking report builded to application like HRMS .. Thank you