Widespread AT&T data outage - September 3rd, 2008
There are multiple reports of a widespread AT&T data outage affecting both 3G and EDGE networks. Phones show as connected to 3G or EDGE, but cannot access data. Voice, visual voicemail, and SMS are unaffected.
Reports so far from Boston, DC, Chicago, St. Louis, etc., but given the time difference it's possible that other parts of the country are affected as well. A call to AT&T support confirmed the outage as 'affecting many cities'. A few reports in the Apple Discussions so far, more on AT&T's forum, and at least one blogger's confirmation picked up by Google.
http://searchn1.com/major-data-outage-for-att-2/
The last major outage (February, 2008) lasted approximately 9 hours.
I live just outside DC and work in town. Funny I got a different answer. I just got off the phone with AT&T and they told me that there is a data service problem with these phones. He made it sound like it was just affecting the Iphone. I just got my new 3g last week and it was working beautifully until last night. This morning I couldn't even get data through the wifi at Starbucks. The AT&T person told me that it affects the wifi as well. Is that correct? Don't understand why I can't use the wifi if the 3g is down. Are they connected somehow?
I sure hope this comes back soon! The whole reason I bought the phone was for the data service.
Similar Messages
-
What cable should I use to transfer data from an early 2008 MacBook to a new MacBook Pro?
Just purchased a new MacBook Pro. Need to transfer data from my Early 2008 MacBook. What cable should I use?
Firewire with a Thunderbolt.Firewire adapter.
http://store.apple.com/us/product/MD464ZM/A/apple-thunderbolt-to-firewire-adapte r
Ciao. -
Using Crystal Report Data Connection in Xcelcius 2008
The documentation does not explain how data to populate row, column and details is passed to SWF.
Can some-one please point how CR Data Connection when created in Xcelcius 2008 is used in Crystal Report Design time ? Is it through Flash variables? Basically more details are needed for "when setup properly" clause. How to map Crystal Reports Fields to Xcelcius Definitions.
Thanks
Harish Tejwani
From Doc:
"With the release of Crystal Reports 2008, it is now possible to embed an Xcelsius-generated SWF file into a Crystal Report and have the SWF consume data from that report. When set up properly, refreshing the data in your Crystal Report will update the embedded SWF.
To configure your Xcelsius SWF to consume data from its Crystal Rport source data, you must open the Data Manager in Xcelsius and add a new Crystal Report Data Consumer connection. After adding the connection, bind the following ranges to your spreadsheet: Row Headers, Column Headers, Data"
"Using Crystal Reports 2008, embed the SWF file into the Crystal Report source data file. When designing your Crystal Report, you will determine what fields/data populate the Row Headers, Comumn Headers, and Data ranges that were designated in your Xcelsius SWF. When set up properly, refereshing your Crystal Report will also refresh the data being sent to and consumed by the embedded SWF. See"<div class="content">
<p>
Please check the following post to see if there is a solution to the issue you are experiencing:
</p>
<p>
<a href="/node/19014"><span style="color: #0063af">http://diamond.businessobjects.com/node/19014</span></a>
</p>
</div> -
Textbox Data Binding in VS 2008, Works on a Main form but not in a Dialog!
I got a perplexing problem here with Databindings. I'm using a POCO class for XML serialization that implements the INotifyPropertyChanged. I'm using Visual Basic 2008 and unfortunately I have to keep the program that way!
I have two projects: One is a Main WinForm, and the other one I'm working with another engineer and I'm trying to create a dialogbox for the users to enter in data (ie: user name, calibration data, etc)
In my Main Winform, I'm doing databinding like this:
TextBoxUserName.DataBindings.Add("Text", data, "Name", False, DataSourceUpdateMode.OnPropertyChanged)
And it works fine, but when I do this in the dialogbox form, NOTHING is being updated. Not the textbox nor the data.name member (which is also a string)
So what's the problem then? How come it works in the instance of the Main Winform but not in the dialogbox?Duplicate post with :https://social.msdn.microsoft.com/Forums/en-US/04720835-d2a9-47cb-a0d9-ca457e6bb377/textbox-data-binding-in-vs-2008-works-on-a-main-form-but-not-in-a-dialog?forum=vbgeneral
-
Date Parameters in Viewer 2008
Post Author: willywig
CA Forum: Crystal Reports
Date Parameters in the 2008 viewer (vs2005) are not working, It will not even prompt for them unless i throw another parameter in the report. And when I do put them in there it ignors them. Am I doing something wrong or is this a MAJOR bug in the viewer?Post Author: willywig
CA Forum: Crystal Reports
Well after working on this I discovered it is the upgrade which does not upgrade all the references. I removed the viewer then added it and it worked... -
How to get the date in 01-jan-2008 format
hi
how to get the date in 01-jan-2008 formatCheck this example of how to get this format..
TABLES: T247.
DATA: V_DATE TYPE SYDATUM.
DATA: V_STRING(20).
V_DATE = SY-DATUM.
SELECT SINGLE * FROM T247
WHERE SPRAS = SY-LANGU
AND MNR = V_DATE+4(2).
IF SY-SUBRC = 0.
CONCATENATE V_DATE+6(2) '-' T247-KTX '-' V_DATE(4)
INTO V_STRING.
WRITE: / V_STRING.
ENDIF.
or
make use of this FM
CONVERSION_EXIT_IDATE_OUTPUT
and see its documentation.
or
/: SET DATE MASK = 'DD-MMM-YYYY'
&DATE&
check with this.
if it is not working try to give space between DD and MMM and YYYY
all of the three work...choose whichever suits u
eg2:
Use FM:CONVERSION_EXIT_IDATE_OUTPUT
Check this Program.....
DATA:DATE TYPE D VALUE '20070912'.
DATA:DATE2(12) TYPE C.
DATA:FINAL_DATE(15) TYPE C.
CALL FUNCTION 'CONVERSION_EXIT_IDATE_OUTPUT'
EXPORTING
INPUT = DATE
IMPORTING
OUTPUT = DATE2.
CONCATENATE DATE20(2) '-' DATE22(3) '-' DATE2+5(4) INTO
FINAL_DATE.
WRITE:FINAL_DATE.
Eg:3
use FM MONTH_NAMES_GET by passing month_names-spras = 'E'
it will return the Mont names in month_names-KTX ( 3 cha short name ) & month_names-LTX ( Long text ). then concatenate 'DD''-' month_names-KTX & 'YY'
reward points if useful -
Displaying date in 01-Jan-2008 format
hi,
I have a urgent requirement while displaying date after selected from the date picker, Is it possible to display date in 01-Jan-2008 format in the date field.
Thanks in advance.
krisGopi,
It look like a bug in WebDynpro, Check below threads for more information:
Why this Date format (dd.MMM.yyyy) doesn't work?
Re: InputField DatePicker Questions
http://help.sap.com/saphelp_nw04/helpdata/en/4a/05ad3e1d1edc61e10000000a114084/content.htm
Thanks
Sandy -
Sales order cannot be created for the delivery date before 20.10.2008
when i create a sales order today (18102008) sales order cannot be created for the delivery date before 20.10.2008
how the system is checking the 2 days duration for delivery date - which table is having this duration days.
is it dependent on sales order type.....
actually i checkeup in V0V8 - even then i couldn't solve this error when i am creating the sales order.
Pls suggestDear Selvamuthu
In normal circumstances, you can create as many as sale orders as you can irrespective of delivery date, and system will not prevent to create unless you apply some user exit for some reason.
Check any user exit is applied for that sale document type where some logic would have been written in such a way that if stock is available, sale order can be created.
thanks
G. Lakshmipathi -
Recipe data migration from 3rd party system to SAP Recipe Management
Dear All,
Can anybody give the steps to be followed to upload Recipe data from a 3rd party system into the
SAP Recipe Management (RM). I am looking for the logical process to populate the RM tables.
Thanksa lot in advance,
Regards,
AchyutaAs I known , there is a interface tool named as IDOC.For more information , please ask your abap team.
-
To print the Date as January 12 , 2008.
Hi to ALL,
1. I want print the date as January 12,2008 in date window instead of 01.12.2008.
2. how can i print the date.plz help me. And also i want give I/P fields to smartforms mainwindow like "your salary hike from Rs.25,000 to Rs. 35,000" .
3. And i have to give date &I/P Personnal Subarea.It is display in main window, these two also I/P fields.
Ex: your sevice transfer to personnal subarea(chennai) effect from date i/p date(10.07.2008)
plz help me in issue.
Thanks & Regards
Pracash.Yes hiddu u can this by that code patch
do this
data: dd(2) type c ,
mm(2) type c ,
yy(4) type c .
dd = P_DATE+6(2).
mm = p_date+4(2).
yy = p_date+0(4).
select single ltx
into p_output
from t247
where SPRAS = sy-langu
and mnr = mm.
till here u finshed splitting dates and extracted your month text
Now u simply have to concatenate the way u want
continue those code lines with these statements
concatenate wa_output
dd into wa_output separated by space.
concatenate wa_output
into wa_output .
concatenate wa_output
yy into wa_output separated by space.
This is how i do in my hr reports and it work fine. this will exactly give u that format
P_date what i used there u declare this way
data: p_date type pa0001-begda,
wa_output type char(25).
reward points if its useful
Swetha.
Edited by: Swetha on May 16, 2008 2:40 PM -
Is anyone else in the DC area experiencing a data outage?
i just got off the phone with verizon and the entire lte network is down. they have no time frame, but folks just remember its the nations most reliable network....lmao
-
Western Wisconsin 4G phone data outage
Eau Claire, Wisconsin data outage. I use a 4G Razr in a 3G area. Last night, about 8 PM, 3G data was no longer available. At 10 PM I called Verizon and they said that they have had problems from the beginning of the week regarding data and 4G phones, even in a 3G area. It is now 8 AM, 11/18, twelve hours after my data outage began, and I am still zero G. The 3G Blackberries in my company have experienced no data interruption. As the Verizon rep said, the problem is with 4G phones.
It has been up/down/up/down since at least 3:30pm Central Time. I didn't notice when it exactly started because I was on WiFi at home most of the day. Turned off WiFi when I left the house and noticed no network at all.
Sucks that it takes out 4g phones, even in 3g mode. My wife's 3g only phone was not affected.
On the bright side, no more threat of $2 'convenience fee' -
4GB iPhone w/ Purchase Date of September 4th
Hello,
I have a question. Should I call apple phone support about my iPhone after this price drop and they getting rid of my iPhone model?
I went to that warranty check to put in my serial number, it gave me my purchase date of september 4th, but no information other than that.crazy4iphone,
Your iPhone is still covered by the one year hardware warranty, still works with AT&T's network, and is still eligible for phone support. The model may be discontinued and available while supplies last, but it is not the end of life of your 4GB iPhone. AppleCare regular supports over the phone computer models that were discontinued previously for several years.
The sales policies for the Apple Store and Apple Store online are available at this link:
http://www.apple.com/legal/sales_policies/
Hope this helps,
Nathan C. -
The clock is set to a date before 1 Jan 2008 and some applications may behave erratically.
hi. this afternoon. I accidently set my time to 1987.
then after awhile. I cant borswer any website. then I try to open app store. And it is all white pages.
but all my sofeware are still working.
then i reastar my Imac. it shows "your clock is set to a date before Jan1. 2008"
okay. And I was going to change it.
but it dosnt let me.
I opened the setting. but it just shows loading date & time forever.
i had wait for a hour already. still show like that.
thx. i really need help. what can i do . it drives me crazy ...If you can launch Terminal (found in /Applications/Utilities) you should be able to run the date command. For example, if you do this now, you could run:
sudo date 011120462014
That should set your time to January (01) 11 (11) 8 (20):46 p.m. 2014.
R-
<Edited by Host> -
Help, data outage???
I can not connect to the internet or access my yahoo email. No EDGE or 3G. Ugh!!! Is there an outage?
AT&T Business Services just confirmed to me that they are experiencing a nationwide data outage (affecting 48 states).
See also: http://www.businessinsider.com/att-suffers-massive-mobile-data-outage-in-northea st-2009-7
EDIT: 3G data is back online now, as of 7:55 AM EDT.
Maybe you are looking for
-
Why can I not import the videos from my iPhone 4 onto my desktop (Windows Vista)? When I plug in it imports the photos without a problem but it doesn't seem to import the videos.
-
Connecting the iPhone to a laptop
I have now downloaded iTunes (the latest version) to my laptop, but have not entered my account info or anything to it, just some CD's that were on my hard drive from Windows Media Center. What would happen if I were to connect either my iPod or iPho
-
Validation for BSED_WSTAT
Hi, How can I set validation for BSED_WSTAT İin OB28? There are only BKPF nad BSEG tables in OB28? Thanks.. Linlin Edited by: LIN LIN on Jul 8, 2009 3:48 PM
-
Hi, We would like to store the DUNS number of our suppliers in the vendor master. It seems that an LFA1 extension is available specifically for storing the DUNS number and other D&B related data. I can not find any info on this. Can some one provide
-
Quartz & WebLogic 8.1 SP4
I want to use Quartz from OpenSymphony with WebLogic. It is all running fine with Tomcat 5.5 and JBoss 4.01. Using WebLogic 8.1 SP4 I get the following errors: <15.04.2005 9.26 Uhr GMT+01:00> <Notice> <WebLogicServer> <BEA-000327>