Widget and my page view

I'm not clear being self taught on how to properly ask this question, but working with a client, they use a booking widget done in java.  Easily cut and pasted in regular spot where last one was.  Before I could easily edit images and hotspots as I could see them in my design view.  Now with the new code, all I can see is that code.  I can no longer view the images if I need to edit or replace.  I can however see the line of code where the images are and they are still in the same spot.
I guess my question is how in the world can I get past the script taking over the whole design view and see the whole page as before where the image elements and hotspots were visible too?  Design view only lets me see the inserted code.  It's frustrating as I may need to edit the page at some time adding new elements and I can't see it.  Oh yes, it shows nicely in live view and works as a webpage.  Just can't expand view past the code.
Yes I am kinda newbie with dealing in inserting java code.  But know how to use Dreamweaver until now.
Any ideas would be greatly helpful as I've tried most ideas I could figure out myself.
thanks
X66

I'm afraid that the problems that you are facing with go beyond the parameters of this forum. One problem per topic yet have a look here http://validator.w3.org/check?verbose=1&uri=http%3A%2F%2Fwww.airforcetravel.us%2F. Pay particular attention to lines 224-227, 415-417 and 841-842.
Fix the 129 errors and 39 warnings and we can start on individual problems.
Gramps

Similar Messages

  • Why do my Horizontal and Vertical page views stay the same?

    When I'm setting up a document, I want to view my pages vertically, not in a horizontal spread.  When I go to View Pages and click Vertical, and then go to Panel Options and click Vertical, the view should change, but it doesn't.  Is there anywhere else I need to check?  I uninstalled the program and then re-installed it, but that didn't fix it.

    OK. There's definitely a problem. In the screen shot I don't see brackets around the page numbers, but let's verify that page shuffling is enabled. Click on the leftmost pae in the pane, then hold the shif key and click on the rightmost page, so they are all selected, then right-click on them and make sure that BOTH Allow Selected Spread to Shuffle and Allow Document Pages to Shuffle are showing checkmarks.
    If shuffling is alread enabled (checkmarks show), then yes, you do need to trash the preferences. Here's the link again: Replace Your Preferences
    If you haven't done a lot of customizing, the keyboard method is OK, (you're going to lose customizations with either method, but you don't get to restore the old ones if it doesn't work when you use the keyboard). To learn how to find the hidden files, if you want to rename or move them, see Access hidden user library files | Mac OS 10.7 Lion

  • HELP! opening a pdf file and using page view

    Hi everyone!
    I'm doing a school project in which I'm trying to develop an app that opens a pdf file from the device memory (ipad or iphone) and lets the user turn pages forward and backward by swiping on the screen. Although I have very basic knowledge of C++ and Objective C programming, I find myself completely lost and don't know how nor where to start. I'd be pleased if you could help me or at least give me a starting point to develop my app.
    Thank you
    Albert

    https://developer.apple.com/library/ios/#samplecode/ZoomingPDFViewer/Introductio n/Intro.html#//apple_ref/doc/uid/DTS40010281

  • How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

    How do i change the display in ADE to a single page view instead of two pages side by side? I find it distracting and prefer to look at one page at a time.

    You can increase the font size and automatically page view changes. Go to menubar; Reading -> PDF View or Epub Text Size (depending upon the ebook) and increase the size.

  • Score,  staff not snapping to page view

    When I open the score in Logic 8 the and click page view the staff runs off the page in to the gray area.
    This was also a problem I had in Logic 7.

    Hi ROGO
    Did you get a response about the staff not snapping to the page view? The exact same problem has just developed on my L8
    Thanks

  • Page Viewer Webpart not displaying some webpages

    Hello
    I have a SharePoint Server 2013 on-prem Publishing Site and the page viewer webpart is unable to display some webpages like Google homepage, etc. but is able to show webpages from a few other sites like internal SharePoint sites, skysports.com, etc.
    I am not able to see a pattern here. I first thought this might be caused due to some sites allowing authenticated access but now its not very consistent. Also, I tried the same with an Office 365 site and the results were exactly the same.
    Please help me to find out the reason for this issue.
    Thanks
    Parth

    Hi,
    According to your post, my understanding is that Page Viewer Webpart don’t display some webpages.
    There are many reasons for the block of the pages in the Page Viewer Web Part.
    For more information, you can refer to:
    IFrame is blocked in SharePoint 2013
    Best Regards,
    Linda Li
    Linda Li
    TechNet Community Support

  • Master Page Header and Footer in Page Viewer Web Part

    Hi.
    I created a View in Pages Library to view specific folders.
    After that i added one Page Viewer web part to one of the aspx page.
    There in the Page Viewer web part properties Link i have provided the url of the view.
    It is displaying the folders but at the same time it is displaying the master page header and footer inside the web part.
    Now i need to display the folders alone inside the Page Viewer web part.
    Please let me know how to exclude the master page header and footer inside the Page Viewer web part?
    Regards,
    Sudheer
    Thanks & Regards, Sudheer

    I think that is the default behavior of the page viewer webpart.
    In the page viewer web part,your just enter the url of the website.So that is treated as webpage and it is displaying as per page.
    http://meritsolutions.com/meritmatters/archives/576-Displaying-a-File,-Folder-or-Web-Page-in-the-Page-Viewer-Web-Part.html
    If you want to display a folder, type in a network path to that folder under Link and the folder content will be displayed. 
    Find the more details about page viewer webpart in msdn
    http://office.microsoft.com/en-in/sharepoint-server-help/page-viewer-web-part-HA010024045.aspx

  • Links and destinations problems - page view

    Hi there,
    I'm working on a large PDF in Adobe Acrobat 9 Pro. This PDF has a LOT of internal links, and I want to link to a page view, and inherit zoom. Not only do I have to manually change the zoom to "inherit zoom" after I create a link, but Acrobat has stopped saving my changes.
    Things were going along swimmingly for awhile - I was creating links, making the destination a page view (so that the user can find the appropriate glossary entry I'm linking them to), and then going back and choosing "Inherit Zoom". And then copying the link and pasting it throughout the document as I needed. all great. Until, randomly, one of the links didnt' test right. I clicked on it and was taken to the TOP of the page, not the page view - its action was set to "Go to a page in this document" instead of "Go to a page view". So I deleted that link, and started over with a fresh one, making sure it was set to "Go to a page view". Then I copied that link, and pasted it 2 pages later. I tested that second link, and once again it just took me to the top of the page. I tested the original one - the one I made to replace the faulty one 2 pages ago - and even though I had JUST set it to page view, it too just went to the top of the page.
    This is so frustrating - Acrobat is literally just ignoring my commands. I am at a loss as to what to do. Please help!

    Somewhere you are doing an add to the vector without first clearing it somewhere...

  • How can I make some pages in a PDF display in single-page view and others in two-page (facing) view?

    Exactly as it says on the tin. I am looking to save a PDF magazine/book layout in such a way so that when opened, only the front and back covers open to the viewer in single-page mode, and the rest of the pages in two-page facing mode, without re-printing the in-between pages in booklet format  and re-inserting them into a new PDF (with the front and back covers left separate and untouched, and included as single portrait-orientation pages). This is so that individual pages can still be printed (on a physical printer, not a "virtual" one like a PDF driver), as-is without having the page next to it included, or the printouts always requiring landscape orientation (resulting with two "pages" from the PDF showing up on one sheet of paper).
    So when the PDF is opened, I want just the front and back cover to be auto-viewed by themselves, and the content (the "meat" of the document) viewed side-by-side, as though one were actually reading a "book" -- but without actually re-doing the content pages to be "fused" side-by-side. Thus creating the "illusion" that they are, in fact, in booklet form. Is this possible, to have different page-display settings for different pages/page ranges in a single PDF? If so, how is this done? If not, what would be my best course of action otherwise to achieve this "virtual" book layout, while still retaining the "physical" structure of the document and allowing individual pages to be printed by themselves rather than "fused" together?
    Using Acrobat X Pro on Windows 7 Pro SP1.

    Dave Merchant wrote:
    The best you can do practicably is the 'two up with cover page' view mode. The first page will appear singly but not centered, and to get the last page to behave it would have to be a folio sheet.
    It's theoretically possible to use JavaScript to reset the view mode as each page is changed, but it makes for a nightmare of usability (what if someone on a smaller display wants to use 'fit to width'? Not an option if JS keeps overruling it). Anything involving JS won't work on non-Adobe software or mobile devices.
    Not a programmer by any means, so I won't be using JavaScript because I wouldn't know where to begin. I was thinking more in terms of an option I could adjust in the menus or dialogues.

  • View application pages - view forms views and application pages. enumerate lists

    view application pages - view forms views and application pages. enumerate lists, if we disable this permission in sharepoint then user gets blocked from getting into application pages which is good. But now I have few list view web parts on a page and user
    is not able to see those reports based on view. It shows working on it. As soon as I enable view application pages permission it works.
    I need a permission level -view forms views only.
    MCTS Sharepoint 2010, MCAD dotnet, MCPDEA, SharePoint Lead

    Hi Amit,
    SharePoint has a feature called “ViewFormPagesLockDown” at site collection scope. After enabling the feature, all groups / users not having the “View Application Pages” permission will not be able to navigate to pages like “_layouts/viewlsts.aspx”
    or “pages/forms/allitems.aspx”.
    So, for your issue, please disable the ViewFormPagesLockDown feature via PowerShell command:
    $lockdownFeature = get-spfeature viewformpageslockdown
    disable-spfeature $lockdownFeature -url [the URL of your site]
    More information:
    http://sharepointtechie.blogspot.jp/2011/06/blocking-access-to-application-pages.html
    http://sureshpydi.blogspot.jp/2013/12/viewformpageslockdown-feature-in.html
    Best Regards,
    Wendy
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Wendy Li
    TechNet Community Support

  • How to add a hand tool (grab the page and drag) function on Chrome and firefox pdf viewer?

    To clarify, hand tool is a function for user click on the pdf and dragging around , that is used to replace the scroll bar navigating .
    The problem is, by default the Chrome and firefox pdf viewer do not have that function and I would like allow the user to drag the page.
    A workaround is to use a jquery plugin (grab to pan https://github.com/Rob--W/grab-to-pan.js in my case) with an embed object (pdf viewer). When I maximum the size of the pdf and user drag the embed object.
    The problem I have encounter is
    1) When using chrome/ firefox, the pdf content do not fit to the page but auto resize by default even I have set the adobe pdf open parameter , using iframe.
    2) The jquery seems conflict with the firefox pdf viewer, it works smoothly on Chrome but not firefox.
    Here is the source code, you may download the plugin from the link mention above and have a look. Don't forget to put a '1.pdf' along with the source file. Thanks
        <!DOCTYPE html>
        <head>
        <meta charset="utf-8">
        <title>Grab-to-pan.js demo</title>
        <link rel="stylesheet" href="grab-to-pan.css" type="text/css">
        <style>
            -webkit-box-sizing: border-box;
            -moz-box-sizing: border-box;
            box-sizing: border-box;
        html, body {
            width: 100%;
            height: 100%;
            margin: 0;
            padding: 0;
        .scrollable {
            overflow: auto;
            width: 100%;
            height: 100%;
            background-color: #EEE;
        #zoomPage {
                  overflow:visible;
            width: 100%;
            height: 150%;
        </style>
        </head>
        <body>
        <label><input type="checkbox" id="activate-g2p" checked> Activate Grab to Pan</label>
        <div class="scrollable" id="scrollable-container">
        <object id = 'zoomPage' type='application/pdf' data= '1.pdf#zoom=page-fit'><p>The PDF can not display</p></object>
        </div>
        <script src="grab-to-pan.js"></script>
        <script>
        document.getElementById('activate-g2p').onchange = function() {
            if (this.checked) g2p.activate();
            else g2p.deactivate();
        var scrollableContainer = document.getElementById('scrollable-container');
        var g2p = new GrabToPan({
            element: scrollableContainer
        g2p.activate();
        </script>
        </body>
        </html>

    This is forum sponsored by Adobe make of Acrobat and Reader. Since Chrome and FireFox web browser have chosen to use their own viewer you might get more help in their forums or customer support.

  • How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    How do I convert a .pub file into a PDF, 2 page spread without the dotted line down the center?  I can select 2 page view and cover page in 2 page view, but the dotted line shows up.  Thank you!!

    Hi skt102711,
    I would like to inform you that acrobat doesn't support .epub to .pdf format conversion. Please browse this Link for more information : Supported file formats | Acrobat, Reader
    Regards,
    Rahul

  • My master pages have disappeared from the View menu in Frame Maker and I can't get to them. View does show body pages and reference pages.

    Master pages went missing from my FrameMaker 12 setup about 4 days ago. I can see body and references pages. I have tried reinstalling. The master pages are missing from all of my FrameMaker documents, absolutely all of them. I have done two new installations of FM 12, no fix.

    Does the old shortcut still work? [Esc, v, M plus its close kin Esc, v, R for Reference pages and Esc, v, B for Body pages – all case-sensitive]
    Also, does "missing" mean you select View master pages and get a blank screen? while double-checking the view shortcuts, I discovered this can be replicated by turning off borders [Esc, v, b] in Master page view … if you happen to be using a Master page layout with no header or footer. But I have also, occasionally, ended up with blank master pages even when they should have had content. It's a mystery.

  • I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what's up with that?

    I use to be able to rotate my iPhone and change the view of an image, Web page, email, and so on, from portrait to landscape, but after update, I cannot. I can only view in portrait mode. Anybody know what’s up with that?

    You need to do the basic troubleshooting steps described in the User Guide, Appendix B.
    Restart phone
    Reset phone
    Restore in iTunes using a backup
    Restore in iTunes as new, without using a backup
    If restoring as new doesn't help, there is a hardware failure in the phone that needs evaluation by Apple.

  • When i set page as template, set editable regions and try to view in browser IE 9 a download box com

    When I set page as template, set editable regions and try to view in browser IE 9 a download box comes up and when i click open it just opens the file again in DW.

    Use the Template to spawn a child page.  File > New > Page from Template...
    Save the child page as some_file.html and then preview that in your browsers.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists 
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com/

Maybe you are looking for